Message ID | 20191120220924.19156-6-c-robey@ti.com |
---|---|
State | Changes Requested |
Delegated to: | Tom Rini |
Headers | show |
Series | board: ti: beagleboneai: add initial support | expand |
On 21/11/19 3:39 AM, Caleb Robey wrote: > Adding the configurations to the evm_defconfig file > > Signed-off-by: Jason Kridner <jdk@ti.com> > Signed-off-by: Caleb Robey <c-robey@ti.com> > > --- > configs/am57xx_evm_defconfig | 2 +- > include/environment/ti/boot.h | 4 +++- > 2 files changed, 4 insertions(+), 2 deletions(-) > > diff --git a/configs/am57xx_evm_defconfig b/configs/am57xx_evm_defconfig > index 588e58947d..f59305794c 100644 > --- a/configs/am57xx_evm_defconfig > +++ b/configs/am57xx_evm_defconfig > @@ -38,7 +38,7 @@ CONFIG_CMD_BCB=y > CONFIG_OF_CONTROL=y > CONFIG_SPL_OF_CONTROL=y > CONFIG_DEFAULT_DEVICE_TREE="am572x-idk" > -CONFIG_OF_LIST="am57xx-beagle-x15 am57xx-beagle-x15-revb1 am57xx-beagle-x15-revc am572x-idk am571x-idk am574x-idk" > +CONFIG_OF_LIST="am57xx-beagle-x15 am57xx-beagle-x15-revb1 am57xx-beagle-x15-revc am5729-beagleboneai am572x-idk am571x-idk am574x-idk" > CONFIG_ENV_IS_IN_MMC=y > CONFIG_SYS_REDUNDAND_ENVIRONMENT=y > CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y > diff --git a/include/environment/ti/boot.h b/include/environment/ti/boot.h > index 684a744f31..d6f153c934 100644 > --- a/include/environment/ti/boot.h > +++ b/include/environment/ti/boot.h > @@ -10,7 +10,7 @@ > #define __TI_BOOT_H > > #ifndef CONSOLEDEV > -#define CONSOLEDEV "ttyS2" > +#define CONSOLEDEV "ttyS0" > #endif This will fail kernel to boot when using the default args. Can you try updating this dynamically? Thanks and regards, Lokesh > > #define VBMETA_PART_SIZE (64 * 1024) > @@ -185,6 +185,8 @@ > "setenv fdtfile am57xx-beagle-x15-revb1.dtb; fi;" \ > "if test $board_name = beagle_x15_revc; then " \ > "setenv fdtfile am57xx-beagle-x15-revc.dtb; fi;" \ > + "if test $board_name = am5729_beagleboneai; then " \ > + "setenv fdtfile am5729-beagleboneai.dtb; fi;" \ > "if test $board_name = am572x_idk; then " \ > "setenv fdtfile am572x-idk.dtb; fi;" \ > "if test $board_name = am574x_idk; then " \ >
On Thu, Nov 21, 2019 at 09:15:03AM +0530, Lokesh Vutla wrote: > > > On 21/11/19 3:39 AM, Caleb Robey wrote: > > Adding the configurations to the evm_defconfig file > > > > Signed-off-by: Jason Kridner <jdk@ti.com> > > Signed-off-by: Caleb Robey <c-robey@ti.com> > > > > --- > > configs/am57xx_evm_defconfig | 2 +- > > include/environment/ti/boot.h | 4 +++- > > 2 files changed, 4 insertions(+), 2 deletions(-) > > > > diff --git a/configs/am57xx_evm_defconfig b/configs/am57xx_evm_defconfig > > index 588e58947d..f59305794c 100644 > > --- a/configs/am57xx_evm_defconfig > > +++ b/configs/am57xx_evm_defconfig > > @@ -38,7 +38,7 @@ CONFIG_CMD_BCB=y > > CONFIG_OF_CONTROL=y > > CONFIG_SPL_OF_CONTROL=y > > CONFIG_DEFAULT_DEVICE_TREE="am572x-idk" > > -CONFIG_OF_LIST="am57xx-beagle-x15 am57xx-beagle-x15-revb1 am57xx-beagle-x15-revc am572x-idk am571x-idk am574x-idk" > > +CONFIG_OF_LIST="am57xx-beagle-x15 am57xx-beagle-x15-revb1 am57xx-beagle-x15-revc am5729-beagleboneai am572x-idk am571x-idk am574x-idk" > > CONFIG_ENV_IS_IN_MMC=y > > CONFIG_SYS_REDUNDAND_ENVIRONMENT=y > > CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y > > diff --git a/include/environment/ti/boot.h b/include/environment/ti/boot.h > > index 684a744f31..d6f153c934 100644 > > --- a/include/environment/ti/boot.h > > +++ b/include/environment/ti/boot.h > > @@ -10,7 +10,7 @@ > > #define __TI_BOOT_H > > > > #ifndef CONSOLEDEV > > -#define CONSOLEDEV "ttyS2" > > +#define CONSOLEDEV "ttyS0" > > #endif > > This will fail kernel to boot when using the default args. Can you try updating > this dynamically? Yes, am57xx_evm will need to perhaps leverage CONFIG_PREBOOT to run something to dynamically update the console environment variable at run time.
> -----Original Message----- > From: Tom Rini [mailto:trini@konsulko.com] > Sent: Thursday, November 21, 2019 9:12 AM > To: Vutla, Lokesh > Cc: Robey, Caleb; u-boot@lists.denx.de; Jason Kridner; Erdahl, Michael; > Kridner, Jason; Kever Yang; Jagan Teki; Michal Simek; Stefan Roese; Neil > Armstrong; Masahiro Yamada; Fabio Estevam; Troy Kisky; Rizvi, Mohammad > Faiz Abbas; Dannenberg, Andreas; Hiblot, Jean-Jacques; Heiko Schocher; Joe > Hershberger; Simon Glass; Sam Protsenko; Bajjuri, Praneeth; Ruslan > Trofymenko; Alistair Strachan; Davis, Andrew > Subject: [EXTERNAL] Re: [PATCH 5/5] board: ti: beagleboneai: enable in > am57xx_evm_defconfig > > On Thu, Nov 21, 2019 at 09:15:03AM +0530, Lokesh Vutla wrote: > > > > > > On 21/11/19 3:39 AM, Caleb Robey wrote: > > > Adding the configurations to the evm_defconfig file > > > > > > Signed-off-by: Jason Kridner <jdk@ti.com> > > > Signed-off-by: Caleb Robey <c-robey@ti.com> > > > > > > --- > > > configs/am57xx_evm_defconfig | 2 +- include/environment/ti/boot.h > > > | 4 +++- > > > 2 files changed, 4 insertions(+), 2 deletions(-) > > > > > > diff --git a/configs/am57xx_evm_defconfig > > > b/configs/am57xx_evm_defconfig index 588e58947d..f59305794c 100644 > > > --- a/configs/am57xx_evm_defconfig > > > +++ b/configs/am57xx_evm_defconfig > > > @@ -38,7 +38,7 @@ CONFIG_CMD_BCB=y > > > CONFIG_OF_CONTROL=y > > > CONFIG_SPL_OF_CONTROL=y > > > CONFIG_DEFAULT_DEVICE_TREE="am572x-idk" > > > -CONFIG_OF_LIST="am57xx-beagle-x15 am57xx-beagle-x15-revb1 > am57xx-beagle-x15-revc am572x-idk am571x-idk am574x-idk" > > > +CONFIG_OF_LIST="am57xx-beagle-x15 am57xx-beagle-x15-revb1 > am57xx-beagle-x15-revc am5729-beagleboneai am572x-idk am571x-idk > am574x-idk" > > > CONFIG_ENV_IS_IN_MMC=y > > > CONFIG_SYS_REDUNDAND_ENVIRONMENT=y > > > CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y > > > diff --git a/include/environment/ti/boot.h > > > b/include/environment/ti/boot.h index 684a744f31..d6f153c934 100644 > > > --- a/include/environment/ti/boot.h > > > +++ b/include/environment/ti/boot.h > > > @@ -10,7 +10,7 @@ > > > #define __TI_BOOT_H > > > > > > #ifndef CONSOLEDEV > > > -#define CONSOLEDEV "ttyS2" > > > +#define CONSOLEDEV "ttyS0" > > > #endif > > > > This will fail kernel to boot when using the default args. Can you try > > updating this dynamically? > > Yes, am57xx_evm will need to perhaps leverage CONFIG_PREBOOT to run > something to dynamically update the console environment variable at run > time. > This line seems to be working: CONFIG_PREBOOT="if board_name am5729_beagleboneai; then setenv console ttyS0,115200; fi" Any concerns with that? I removed the change from boot.h and tested with the am5729 IDK and beagleboneai board. Everything seems to be working just fine. Best, Caleb > -- > Tom
On Thu, Nov 21, 2019 at 04:00:03PM +0000, Robey, Caleb wrote: > > > > -----Original Message----- > > From: Tom Rini [mailto:trini@konsulko.com] > > Sent: Thursday, November 21, 2019 9:12 AM > > To: Vutla, Lokesh > > Cc: Robey, Caleb; u-boot@lists.denx.de; Jason Kridner; Erdahl, Michael; > > Kridner, Jason; Kever Yang; Jagan Teki; Michal Simek; Stefan Roese; Neil > > Armstrong; Masahiro Yamada; Fabio Estevam; Troy Kisky; Rizvi, Mohammad > > Faiz Abbas; Dannenberg, Andreas; Hiblot, Jean-Jacques; Heiko Schocher; Joe > > Hershberger; Simon Glass; Sam Protsenko; Bajjuri, Praneeth; Ruslan > > Trofymenko; Alistair Strachan; Davis, Andrew > > Subject: [EXTERNAL] Re: [PATCH 5/5] board: ti: beagleboneai: enable in > > am57xx_evm_defconfig > > > > On Thu, Nov 21, 2019 at 09:15:03AM +0530, Lokesh Vutla wrote: > > > > > > > > > On 21/11/19 3:39 AM, Caleb Robey wrote: > > > > Adding the configurations to the evm_defconfig file > > > > > > > > Signed-off-by: Jason Kridner <jdk@ti.com> > > > > Signed-off-by: Caleb Robey <c-robey@ti.com> > > > > > > > > --- > > > > configs/am57xx_evm_defconfig | 2 +- include/environment/ti/boot.h > > > > | 4 +++- > > > > 2 files changed, 4 insertions(+), 2 deletions(-) > > > > > > > > diff --git a/configs/am57xx_evm_defconfig > > > > b/configs/am57xx_evm_defconfig index 588e58947d..f59305794c 100644 > > > > --- a/configs/am57xx_evm_defconfig > > > > +++ b/configs/am57xx_evm_defconfig > > > > @@ -38,7 +38,7 @@ CONFIG_CMD_BCB=y > > > > CONFIG_OF_CONTROL=y > > > > CONFIG_SPL_OF_CONTROL=y > > > > CONFIG_DEFAULT_DEVICE_TREE="am572x-idk" > > > > -CONFIG_OF_LIST="am57xx-beagle-x15 am57xx-beagle-x15-revb1 > > am57xx-beagle-x15-revc am572x-idk am571x-idk am574x-idk" > > > > +CONFIG_OF_LIST="am57xx-beagle-x15 am57xx-beagle-x15-revb1 > > am57xx-beagle-x15-revc am5729-beagleboneai am572x-idk am571x-idk > > am574x-idk" > > > > CONFIG_ENV_IS_IN_MMC=y > > > > CONFIG_SYS_REDUNDAND_ENVIRONMENT=y > > > > CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y > > > > diff --git a/include/environment/ti/boot.h > > > > b/include/environment/ti/boot.h index 684a744f31..d6f153c934 100644 > > > > --- a/include/environment/ti/boot.h > > > > +++ b/include/environment/ti/boot.h > > > > @@ -10,7 +10,7 @@ > > > > #define __TI_BOOT_H > > > > > > > > #ifndef CONSOLEDEV > > > > -#define CONSOLEDEV "ttyS2" > > > > +#define CONSOLEDEV "ttyS0" > > > > #endif > > > > > > This will fail kernel to boot when using the default args. Can you try > > > updating this dynamically? > > > > Yes, am57xx_evm will need to perhaps leverage CONFIG_PREBOOT to run > > something to dynamically update the console environment variable at run > > time. > > > > This line seems to be working: > CONFIG_PREBOOT="if board_name am5729_beagleboneai; then setenv console ttyS0,115200; fi" > > Any concerns with that? I removed the change from boot.h and > tested with the am5729 IDK and beagleboneai board. Everything seems to be working just fine. That literal string? That can't work right, can it? I think you need more like (borrowing from include/environment/ti/boot.h): if test $board_name = am5729_beagleboneai; then setenv console ttyS0,115200; fi
> -----Original Message----- > From: Tom Rini [mailto:trini@konsulko.com] > Sent: Thursday, November 21, 2019 10:34 AM > To: Robey, Caleb > Cc: Vutla, Lokesh; u-boot@lists.denx.de; Jason Kridner; Erdahl, Michael; > Kridner, Jason; Kever Yang; Jagan Teki; Michal Simek; Stefan Roese; Neil > Armstrong; Masahiro Yamada; Fabio Estevam; Troy Kisky; Rizvi, Mohammad > Faiz Abbas; Dannenberg, Andreas; Hiblot, Jean-Jacques; Heiko Schocher; Joe > Hershberger; Simon Glass; Sam Protsenko; Bajjuri, Praneeth; Ruslan > Trofymenko; Alistair Strachan; Davis, Andrew > Subject: Re: [EXTERNAL] Re: [PATCH 5/5] board: ti: beagleboneai: enable in > am57xx_evm_defconfig > > On Thu, Nov 21, 2019 at 04:00:03PM +0000, Robey, Caleb wrote: > > > > > > > -----Original Message----- > > > From: Tom Rini [mailto:trini@konsulko.com] > > > Sent: Thursday, November 21, 2019 9:12 AM > > > To: Vutla, Lokesh > > > Cc: Robey, Caleb; u-boot@lists.denx.de; Jason Kridner; Erdahl, > > > Michael; Kridner, Jason; Kever Yang; Jagan Teki; Michal Simek; > > > Stefan Roese; Neil Armstrong; Masahiro Yamada; Fabio Estevam; Troy > > > Kisky; Rizvi, Mohammad Faiz Abbas; Dannenberg, Andreas; Hiblot, > > > Jean-Jacques; Heiko Schocher; Joe Hershberger; Simon Glass; Sam > > > Protsenko; Bajjuri, Praneeth; Ruslan Trofymenko; Alistair Strachan; > > > Davis, Andrew > > > Subject: [EXTERNAL] Re: [PATCH 5/5] board: ti: beagleboneai: enable > > > in am57xx_evm_defconfig > > > > > > On Thu, Nov 21, 2019 at 09:15:03AM +0530, Lokesh Vutla wrote: > > > > > > > > > > > > On 21/11/19 3:39 AM, Caleb Robey wrote: > > > > > Adding the configurations to the evm_defconfig file > > > > > > > > > > Signed-off-by: Jason Kridner <jdk@ti.com> > > > > > Signed-off-by: Caleb Robey <c-robey@ti.com> > > > > > > > > > > --- > > > > > configs/am57xx_evm_defconfig | 2 +- > > > > > include/environment/ti/boot.h > > > > > | 4 +++- > > > > > 2 files changed, 4 insertions(+), 2 deletions(-) > > > > > > > > > > diff --git a/configs/am57xx_evm_defconfig > > > > > b/configs/am57xx_evm_defconfig index 588e58947d..f59305794c > > > > > 100644 > > > > > --- a/configs/am57xx_evm_defconfig > > > > > +++ b/configs/am57xx_evm_defconfig > > > > > @@ -38,7 +38,7 @@ CONFIG_CMD_BCB=y CONFIG_OF_CONTROL=y > > > > > CONFIG_SPL_OF_CONTROL=y > CONFIG_DEFAULT_DEVICE_TREE="am572x-idk" > > > > > -CONFIG_OF_LIST="am57xx-beagle-x15 am57xx-beagle-x15-revb1 > > > am57xx-beagle-x15-revc am572x-idk am571x-idk am574x-idk" > > > > > +CONFIG_OF_LIST="am57xx-beagle-x15 am57xx-beagle-x15-revb1 > > > am57xx-beagle-x15-revc am5729-beagleboneai am572x-idk am571x-idk > > > am574x-idk" > > > > > CONFIG_ENV_IS_IN_MMC=y > > > > > CONFIG_SYS_REDUNDAND_ENVIRONMENT=y > > > > > CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y > > > > > diff --git a/include/environment/ti/boot.h > > > > > b/include/environment/ti/boot.h index 684a744f31..d6f153c934 > > > > > 100644 > > > > > --- a/include/environment/ti/boot.h > > > > > +++ b/include/environment/ti/boot.h > > > > > @@ -10,7 +10,7 @@ > > > > > #define __TI_BOOT_H > > > > > > > > > > #ifndef CONSOLEDEV > > > > > -#define CONSOLEDEV "ttyS2" > > > > > +#define CONSOLEDEV "ttyS0" > > > > > #endif > > > > > > > > This will fail kernel to boot when using the default args. Can you > > > > try updating this dynamically? > > > > > > Yes, am57xx_evm will need to perhaps leverage CONFIG_PREBOOT to run > > > something to dynamically update the console environment variable at > > > run time. > > > > > > > This line seems to be working: > > CONFIG_PREBOOT="if board_name am5729_beagleboneai; then setenv > console ttyS0,115200; fi" > > > > Any concerns with that? I removed the change from boot.h and tested > > with the am5729 IDK and beagleboneai board. Everything seems to be > working just fine. > > That literal string? That can't work right, can it? I think you need more like > (borrowing from include/environment/ti/boot.h): > if test $board_name = am5729_beagleboneai; then setenv console > ttyS0,115200; fi You're totally right - I think some default behaviors allowed them to boot. It can be written 'if test $board_name am5729_beagleboneai;" but then that will work. > > -- > Tom
On Thu, Nov 21, 2019 at 10:28:05PM +0000, Robey, Caleb wrote: > > > > -----Original Message----- > > From: Tom Rini [mailto:trini@konsulko.com] > > Sent: Thursday, November 21, 2019 10:34 AM > > To: Robey, Caleb > > Cc: Vutla, Lokesh; u-boot@lists.denx.de; Jason Kridner; Erdahl, Michael; > > Kridner, Jason; Kever Yang; Jagan Teki; Michal Simek; Stefan Roese; Neil > > Armstrong; Masahiro Yamada; Fabio Estevam; Troy Kisky; Rizvi, Mohammad > > Faiz Abbas; Dannenberg, Andreas; Hiblot, Jean-Jacques; Heiko Schocher; Joe > > Hershberger; Simon Glass; Sam Protsenko; Bajjuri, Praneeth; Ruslan > > Trofymenko; Alistair Strachan; Davis, Andrew > > Subject: Re: [EXTERNAL] Re: [PATCH 5/5] board: ti: beagleboneai: enable in > > am57xx_evm_defconfig > > > > On Thu, Nov 21, 2019 at 04:00:03PM +0000, Robey, Caleb wrote: > > > > > > > > > > -----Original Message----- > > > > From: Tom Rini [mailto:trini@konsulko.com] > > > > Sent: Thursday, November 21, 2019 9:12 AM > > > > To: Vutla, Lokesh > > > > Cc: Robey, Caleb; u-boot@lists.denx.de; Jason Kridner; Erdahl, > > > > Michael; Kridner, Jason; Kever Yang; Jagan Teki; Michal Simek; > > > > Stefan Roese; Neil Armstrong; Masahiro Yamada; Fabio Estevam; Troy > > > > Kisky; Rizvi, Mohammad Faiz Abbas; Dannenberg, Andreas; Hiblot, > > > > Jean-Jacques; Heiko Schocher; Joe Hershberger; Simon Glass; Sam > > > > Protsenko; Bajjuri, Praneeth; Ruslan Trofymenko; Alistair Strachan; > > > > Davis, Andrew > > > > Subject: [EXTERNAL] Re: [PATCH 5/5] board: ti: beagleboneai: enable > > > > in am57xx_evm_defconfig > > > > > > > > On Thu, Nov 21, 2019 at 09:15:03AM +0530, Lokesh Vutla wrote: > > > > > > > > > > > > > > > On 21/11/19 3:39 AM, Caleb Robey wrote: > > > > > > Adding the configurations to the evm_defconfig file > > > > > > > > > > > > Signed-off-by: Jason Kridner <jdk@ti.com> > > > > > > Signed-off-by: Caleb Robey <c-robey@ti.com> > > > > > > > > > > > > --- > > > > > > configs/am57xx_evm_defconfig | 2 +- > > > > > > include/environment/ti/boot.h > > > > > > | 4 +++- > > > > > > 2 files changed, 4 insertions(+), 2 deletions(-) > > > > > > > > > > > > diff --git a/configs/am57xx_evm_defconfig > > > > > > b/configs/am57xx_evm_defconfig index 588e58947d..f59305794c > > > > > > 100644 > > > > > > --- a/configs/am57xx_evm_defconfig > > > > > > +++ b/configs/am57xx_evm_defconfig > > > > > > @@ -38,7 +38,7 @@ CONFIG_CMD_BCB=y CONFIG_OF_CONTROL=y > > > > > > CONFIG_SPL_OF_CONTROL=y > > CONFIG_DEFAULT_DEVICE_TREE="am572x-idk" > > > > > > -CONFIG_OF_LIST="am57xx-beagle-x15 am57xx-beagle-x15-revb1 > > > > am57xx-beagle-x15-revc am572x-idk am571x-idk am574x-idk" > > > > > > +CONFIG_OF_LIST="am57xx-beagle-x15 am57xx-beagle-x15-revb1 > > > > am57xx-beagle-x15-revc am5729-beagleboneai am572x-idk am571x-idk > > > > am574x-idk" > > > > > > CONFIG_ENV_IS_IN_MMC=y > > > > > > CONFIG_SYS_REDUNDAND_ENVIRONMENT=y > > > > > > CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y > > > > > > diff --git a/include/environment/ti/boot.h > > > > > > b/include/environment/ti/boot.h index 684a744f31..d6f153c934 > > > > > > 100644 > > > > > > --- a/include/environment/ti/boot.h > > > > > > +++ b/include/environment/ti/boot.h > > > > > > @@ -10,7 +10,7 @@ > > > > > > #define __TI_BOOT_H > > > > > > > > > > > > #ifndef CONSOLEDEV > > > > > > -#define CONSOLEDEV "ttyS2" > > > > > > +#define CONSOLEDEV "ttyS0" > > > > > > #endif > > > > > > > > > > This will fail kernel to boot when using the default args. Can you > > > > > try updating this dynamically? > > > > > > > > Yes, am57xx_evm will need to perhaps leverage CONFIG_PREBOOT to run > > > > something to dynamically update the console environment variable at > > > > run time. > > > > > > > > > > This line seems to be working: > > > CONFIG_PREBOOT="if board_name am5729_beagleboneai; then setenv > > console ttyS0,115200; fi" > > > > > > Any concerns with that? I removed the change from boot.h and tested > > > with the am5729 IDK and beagleboneai board. Everything seems to be > > working just fine. > > > > That literal string? That can't work right, can it? I think you need more like > > (borrowing from include/environment/ti/boot.h): > > if test $board_name = am5729_beagleboneai; then setenv console > > ttyS0,115200; fi > > You're totally right - I think some default behaviors allowed them to boot. > It can be written 'if test $board_name am5729_beagleboneai;" but then that > will work. Nope, it needs that = too. Doing a sandbox build can be really helpful for testing things like this: => if test $stdin serial;then echo happen;fi happen => if test $stdin foo;then echo happen;fi happen => if test $stdin = foo;then echo happen;fi => if test $stdin = serial;then echo happen;fi happen =>
diff --git a/configs/am57xx_evm_defconfig b/configs/am57xx_evm_defconfig index 588e58947d..f59305794c 100644 --- a/configs/am57xx_evm_defconfig +++ b/configs/am57xx_evm_defconfig @@ -38,7 +38,7 @@ CONFIG_CMD_BCB=y CONFIG_OF_CONTROL=y CONFIG_SPL_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="am572x-idk" -CONFIG_OF_LIST="am57xx-beagle-x15 am57xx-beagle-x15-revb1 am57xx-beagle-x15-revc am572x-idk am571x-idk am574x-idk" +CONFIG_OF_LIST="am57xx-beagle-x15 am57xx-beagle-x15-revb1 am57xx-beagle-x15-revc am5729-beagleboneai am572x-idk am571x-idk am574x-idk" CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y diff --git a/include/environment/ti/boot.h b/include/environment/ti/boot.h index 684a744f31..d6f153c934 100644 --- a/include/environment/ti/boot.h +++ b/include/environment/ti/boot.h @@ -10,7 +10,7 @@ #define __TI_BOOT_H #ifndef CONSOLEDEV -#define CONSOLEDEV "ttyS2" +#define CONSOLEDEV "ttyS0" #endif #define VBMETA_PART_SIZE (64 * 1024) @@ -185,6 +185,8 @@ "setenv fdtfile am57xx-beagle-x15-revb1.dtb; fi;" \ "if test $board_name = beagle_x15_revc; then " \ "setenv fdtfile am57xx-beagle-x15-revc.dtb; fi;" \ + "if test $board_name = am5729_beagleboneai; then " \ + "setenv fdtfile am5729-beagleboneai.dtb; fi;" \ "if test $board_name = am572x_idk; then " \ "setenv fdtfile am572x-idk.dtb; fi;" \ "if test $board_name = am574x_idk; then " \