| Message ID | alpine.LFD.2.00.1104291544410.28705@right.am.freescale.net |
|---|---|
| State | Accepted |
| Delegated to: | Kumar Gala |
| Headers | show |
Dear Kumar Gala, In message <alpine.LFD.2.00.1104291544410.28705@right.am.freescale.net> you wrote: > > The following changes since commit a000b7950da938d2df37ec5e081cd0680e6e4bbe: ... > Trübenbach, Ralf (1): > powerpc/85xx: Fix Wrong PCIe 3 virtual address on corenet_ds platforms It appears you are changing the commit messages without notice? The posted subject was: QorIQ corenet_ds.h: Wrong PCIe 3 virtual address Please don't - this makes it very difficult to match your commits to postings on the ML. > 51 files changed, 1252 insertions(+), 128 deletions(-) Applied. Best regards, Wolfgang Denk
On Apr 30, 2011, at 4:03 PM, Wolfgang Denk wrote: > Dear Kumar Gala, > > In message <alpine.LFD.2.00.1104291544410.28705@right.am.freescale.net> you wrote: >> >> The following changes since commit a000b7950da938d2df37ec5e081cd0680e6e4bbe: > ... >> Trübenbach, Ralf (1): >> powerpc/85xx: Fix Wrong PCIe 3 virtual address on corenet_ds platforms > > It appears you are changing the commit messages without notice? > > The posted subject was: > > QorIQ corenet_ds.h: Wrong PCIe 3 virtual address > > Please don't - this makes it very difficult to match your commits to > postings on the ML. > >> 51 files changed, 1252 insertions(+), 128 deletions(-) > > Applied. > > Best regards, > > Wolfgang Denk I thought that was less of an issue because of our use of patchworks. - k
On Mon, May 2, 2011 at 10:00 AM, Kumar Gala <galak@kernel.crashing.org> wrote:
> I thought that was less of an issue because of our use of patchworks.
How? Patchwork uses the same subject line as the email. There's
still the problem of trying to correlate the actual commit to the
entry in patchwork.
On the other hand, I don't know of any good way to correct a patch's
subject line without having the patch re-submitted to the mailing
list.
Dear Tabi Timur-B04825, In message <BANLkTimz0ifsCmF9oo-Q_9Sv9wC0rQtMQQ@mail.gmail.com> you wrote: > > How? Patchwork uses the same subject line as the email. There's > still the problem of trying to correlate the actual commit to the > entry in patchwork. > > On the other hand, I don't know of any good way to correct a patch's > subject line without having the patch re-submitted to the mailing > list. It's possible to match a patch based on it's content. For example, you can use something like HASH=$(/home/wd/bin/pwparser.py --hash <$MBOX) pwclient apply -h $HASH pwclient update -s 'Accepted' -h $HASH [error checking omitted here] to apply and update the status of a patch in PW. So you can of course find out which patch it was based on the hash, which depends on the content, not the subject. But this is way too expensive and time consuming for regular work. Best regards, Wolfgang Denk
Dear Kumar Gala, In message <9BC90F9C-896B-47E9-B445-2692AAD1FB30@kernel.crashing.org> you wrote: > > > It appears you are changing the commit messages without notice? > > > > The posted subject was: > > > > QorIQ corenet_ds.h: Wrong PCIe 3 virtual address > > > > Please don't - this makes it very difficult to match your commits to > > postings on the ML. ... > I thought that was less of an issue because of our use of patchworks. Think that thought to an end, please. It is counterproductive. Best regards, Wolfgang Denk
[ w/ L2 patch dropped ] The following changes since commit a000b7950da938d2df37ec5e081cd0680e6e4bbe: common: add a grepenv command (2011-04-28 01:00:07 +0200) are available in the git repository at: git://git.denx.de/u-boot-mpc85xx.git master Andy Fleming (1): tsec: Fix MDIO on devices with eTSEC2 Dipen Dudhat (2): powerpc/85xx: Change CS timing params before changing CS properties on IFC powerpc/85xx: Added PMUXCR1 and PMUXCR2 defines for P1010/P1014 SoC Emil Medve (2): powerpc/85xx: fsl_corenet_serdes code rework p4080/serdes: Implement the XAUI workaround for SERDES9 erratum Haiying Wang (1): powerpc/85xx: Add device tree fixup for bman portal Jerry Huang (1): powerpc/85xx: Enable eSPI controller & SPI boot support on P2020DS Jiang Yutang (1): powerpc/85xx: Enable eSPI support on P1022DS Kim Phillips (1): powerpc/85xx: handle both "secX.Y" and "sec-vX.Y" properties Kumar Gala (3): powerpc: Add P3041DS/P5020DS board support (uses corenet_ds code) powerpc/85xx: Change timebase divisor to be defined per processor powerpc/85xx: Bump up the CONFIG_SYS_BOOTM_LEN to 64M on FSL 85xx boards Kyle Moffett (1): fsl-ddr: Fix mixed-case macro names Lei Xu (1): powerpc/85xx: Enable ESDHC111 erratum on P2040/P3041/P5010/P5020 SoCs Matthew McClintock (1): powerpc/85xx: Don't set FT_FSL_PCI_SETUP if CONFIG_PCI is not set Mingkai Hu (1): powerpc: eSPI and eSPI controller support Priyanka Jain (2): powerpc/85xx: Add support to save environment in SD card on p1_p2_rdb powerpc/85xx: Enable eSPI support for p1_p2_rdb Ramneek Mehresh (1): powerpc/85xx: Add support for 2nd USB controller on p1_p2_rdb Roy Zang (1): powerpc/85xx: Enable Internal USB PHY for p2040, p3041, p5010 and p5020 Timur Tabi (6): powerpc/86xx: remove empty board_early_init_f() powerpc/fsl: add 'pixis_reset dump' command powerpc/85xx: Implement work-around for P4080 erratum SERDES-A005 powerpc/85xx: Display SERDES 8 erratum warning if banks are not disabled powerpc/85xx: Extend SERDES9 erratum work-around to SGMII, SRIO, and AURORA powerpc/85xx: Implement work-around for P4080 erratum SERDES-A001 Trübenbach, Ralf (1): powerpc/85xx: Fix Wrong PCIe 3 virtual address on corenet_ds platforms README | 7 + arch/powerpc/cpu/mpc85xx/cmd_errata.c | 6 + arch/powerpc/cpu/mpc85xx/cpu.c | 11 +- arch/powerpc/cpu/mpc85xx/cpu_init.c | 17 ++ arch/powerpc/cpu/mpc85xx/fdt.c | 1 + arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c | 315 +++++++++++++++++++++-- arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h | 2 +- arch/powerpc/cpu/mpc85xx/portals.c | 30 +++ arch/powerpc/cpu/mpc8xxx/ddr/util.c | 18 +- arch/powerpc/cpu/mpc8xxx/fsl_ifc.c | 31 ++-- arch/powerpc/include/asm/config.h | 7 + arch/powerpc/include/asm/config_mpc85xx.h | 21 ++ arch/powerpc/include/asm/fsl_liodn.h | 13 + arch/powerpc/include/asm/fsl_pci.h | 4 +- arch/powerpc/include/asm/fsl_portals.h | 3 +- arch/powerpc/include/asm/fsl_serdes.h | 7 + arch/powerpc/include/asm/immap_85xx.h | 89 +++++++ board/freescale/common/Makefile | 2 + board/freescale/common/ngpixis.c | 58 +++++ board/freescale/common/ngpixis.h | 7 +- board/freescale/corenet_ds/Makefile | 2 + board/freescale/corenet_ds/corenet_ds.c | 45 +++- board/freescale/corenet_ds/law.c | 5 +- board/freescale/corenet_ds/p3041ds_ddr.c | 14 + board/freescale/corenet_ds/p5020ds_ddr.c | 18 ++ board/freescale/corenet_ds/tlb.c | 10 + board/freescale/mpc8641hpcn/mpc8641hpcn.c | 5 - board/freescale/p1022ds/p1022ds.c | 3 + board/freescale/p1_p2_rdb/p1_p2_rdb.c | 14 + boards.cfg | 3 + drivers/spi/Makefile | 1 + drivers/spi/fsl_espi.c | 334 +++++++++++++++++++++++++ include/configs/MPC8536DS.h | 6 +- include/configs/MPC8540ADS.h | 6 +- include/configs/MPC8541CDS.h | 6 +- include/configs/MPC8544DS.h | 6 +- include/configs/MPC8548CDS.h | 6 +- include/configs/MPC8555CDS.h | 6 +- include/configs/MPC8560ADS.h | 6 +- include/configs/MPC8568MDS.h | 6 +- include/configs/MPC8569MDS.h | 6 +- include/configs/MPC8572DS.h | 6 +- include/configs/MPC8641HPCN.h | 2 - include/configs/P1022DS.h | 21 ++- include/configs/P1_P2_RDB.h | 31 ++- include/configs/P2020DS.h | 34 +++- include/configs/P3041DS.h | 37 +++ include/configs/P5020DS.h | 37 +++ include/configs/corenet_ds.h | 46 +++- include/spi.h | 7 - include/tsec.h | 2 +- 51 files changed, 1252 insertions(+), 128 deletions(-) create mode 100644 board/freescale/corenet_ds/p3041ds_ddr.c create mode 100644 board/freescale/corenet_ds/p5020ds_ddr.c create mode 100644 drivers/spi/fsl_espi.c create mode 100644 include/configs/P3041DS.h create mode 100644 include/configs/P5020DS.h