| Message ID | 5d2c97394f64bc671c4183567db7169e3ff50804.1485408968.git.baruch@tkos.co.il |
|---|---|
| State | Accepted |
| Commit | 3cca45ee6d516e9cd21f3bea9ba3d525c1805b47 |
| Headers | show |
Baruch, All, On 2017-01-26 07:36 +0200, Baruch Siach spake thusly: > We no longer use the marked kernel. > > Cc: Peter Seiderer <ps.report@gmx.net> > Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Regards, Yann E. MORIN. > --- > board/raspberrypi/post-image.sh | 5 ----- > board/raspberrypi/readme.txt | 7 ++----- > 2 files changed, 2 insertions(+), 10 deletions(-) > > diff --git a/board/raspberrypi/post-image.sh b/board/raspberrypi/post-image.sh > index c00975288c6f..b2bb07067835 100755 > --- a/board/raspberrypi/post-image.sh > +++ b/board/raspberrypi/post-image.sh > @@ -18,11 +18,6 @@ __EOF__ > ;; > esac > > -# Mark the kernel as DT-enabled > -mkdir -p "${BINARIES_DIR}/kernel-marked" > -${HOST_DIR}/usr/bin/mkknlimg "${BINARIES_DIR}/zImage" \ > - "${BINARIES_DIR}/kernel-marked/zImage" > - > rm -rf "${GENIMAGE_TMP}" > > genimage \ > diff --git a/board/raspberrypi/readme.txt b/board/raspberrypi/readme.txt > index 03178ff95fa4..b6adca5151f6 100644 > --- a/board/raspberrypi/readme.txt > +++ b/board/raspberrypi/readme.txt > @@ -53,7 +53,6 @@ After building, you should obtain this tree: > +-- bcm2709-rpi-2-b.dtb [1] > +-- bcm2710-rpi-3-b.dtb [1] > +-- boot.vfat > - +-- kernel-marked/zImage [2] > +-- rootfs.ext4 > +-- rpi-firmware/ > | +-- bootcode.bin > @@ -61,16 +60,14 @@ After building, you should obtain this tree: > | +-- config.txt > | +-- fixup.dat > | +-- start.elf > - | `-- overlays/ [3] > + | `-- overlays/ [2] > +-- sdcard.img > `-- zImage > > [1] Not all of them will be present, depending on the RaspberryPi > model you are using. > > -[2] This is the mkknlimg DT-marked kernel. > - > -[3] Only for the Raspberry Pi 3 Model (overlay pi3-miniuart-bt is needed > +[2] Only for the Raspberry Pi 3 Model (overlay pi3-miniuart-bt is needed > to enable the RPi3 serial console otherwise occupied by the bluetooth > chip). Alternative would be to disable the serial console in cmdline.txt > and /etc/inittab. > -- > 2.11.0 > > _______________________________________________ > buildroot mailing list > buildroot@busybox.net > http://lists.busybox.net/mailman/listinfo/buildroot
diff --git a/board/raspberrypi/post-image.sh b/board/raspberrypi/post-image.sh index c00975288c6f..b2bb07067835 100755 --- a/board/raspberrypi/post-image.sh +++ b/board/raspberrypi/post-image.sh @@ -18,11 +18,6 @@ __EOF__ ;; esac -# Mark the kernel as DT-enabled -mkdir -p "${BINARIES_DIR}/kernel-marked" -${HOST_DIR}/usr/bin/mkknlimg "${BINARIES_DIR}/zImage" \ - "${BINARIES_DIR}/kernel-marked/zImage" - rm -rf "${GENIMAGE_TMP}" genimage \ diff --git a/board/raspberrypi/readme.txt b/board/raspberrypi/readme.txt index 03178ff95fa4..b6adca5151f6 100644 --- a/board/raspberrypi/readme.txt +++ b/board/raspberrypi/readme.txt @@ -53,7 +53,6 @@ After building, you should obtain this tree: +-- bcm2709-rpi-2-b.dtb [1] +-- bcm2710-rpi-3-b.dtb [1] +-- boot.vfat - +-- kernel-marked/zImage [2] +-- rootfs.ext4 +-- rpi-firmware/ | +-- bootcode.bin @@ -61,16 +60,14 @@ After building, you should obtain this tree: | +-- config.txt | +-- fixup.dat | +-- start.elf - | `-- overlays/ [3] + | `-- overlays/ [2] +-- sdcard.img `-- zImage [1] Not all of them will be present, depending on the RaspberryPi model you are using. -[2] This is the mkknlimg DT-marked kernel. - -[3] Only for the Raspberry Pi 3 Model (overlay pi3-miniuart-bt is needed +[2] Only for the Raspberry Pi 3 Model (overlay pi3-miniuart-bt is needed to enable the RPi3 serial console otherwise occupied by the bluetooth chip). Alternative would be to disable the serial console in cmdline.txt and /etc/inittab.
We no longer use the marked kernel. Cc: Peter Seiderer <ps.report@gmx.net> Signed-off-by: Baruch Siach <baruch@tkos.co.il> --- board/raspberrypi/post-image.sh | 5 ----- board/raspberrypi/readme.txt | 7 ++----- 2 files changed, 2 insertions(+), 10 deletions(-)