diff mbox

[1/6] QE: Add IC, SI and SIRAM document to device tree bindings.

Message ID 1452219494-31947-1-git-send-email-qiang.zhao@nxp.com (mailing list archive)
State Superseded
Headers show

Commit Message

Qiang Zhao Jan. 8, 2016, 2:18 a.m. UTC
Add IC, SI and SIRAM document of QE to
Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt

Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
---
 .../devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt  | 53 ++++++++++++++++++++++
 1 file changed, 53 insertions(+)

Comments

Rob Herring Jan. 8, 2016, 9:02 p.m. UTC | #1
On Fri, Jan 08, 2016 at 10:18:09AM +0800, Zhao Qiang wrote:
> Add IC, SI and SIRAM document of QE to
> Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt
> 
> Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
> ---
>  .../devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt  | 53 ++++++++++++++++++++++
>  1 file changed, 53 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt
> index 4f89302..5e00fc8 100644
> --- a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt
> +++ b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt
> @@ -69,6 +69,59 @@ Example:
>  	};
>       };
>  
> +* Interrupt Controller (IC)
> +
> +Required properties:
> +- compatible : should be "fsl,qe-ic".
> +- reg : Address range of IC register set.
> +- interrupts : interrupts generated by the device.

Add interrupt-controller, too.

> +
> +Example:
> +
> +	qeic: interrupt-controller@80 {
> +		interrupt-controller;
> +		compatible = "fsl,qe-ic";
> +		#address-cells = <0>;
> +		#interrupt-cells = <1>;
> +		reg = <0x80 0x80>;
> +		interrupts = <95 2 0 0  94 2 0 0>; //high:79 low:78
> +	};
> +
> +* Serial Interface Block (SI)
> +
> +The SI manages the routing of eight TDM lines to the QE block serial drivers
> +, the MCC and the UCCs, for receive and transmit.
> +
> +Required properties:
> +- compatible : should be "fsl,qe-si".
> +- reg : Address range of SI register set.
> +
> +Example:
> +
> +	si1: si@700 {
> +		#address-cells = <1>;
> +		#size-cells = <0>;

Why are these needed? There are no child nodes.

> +		compatible = "fsl,qe-si";
> +		reg = <0x700 0x80>;
> +	};
> +
> +* Serial Interface Block RAM(SIRAM)
> +
> +store the routing entries of SI
> +
> +Required properties:
> +- compatible : should be "fsl,qe-siram".
> +- reg : Address range of SI RAM.
> +
> +Example:
> +
> +	siram1: siram@1000 {
> +		#address-cells = <1>;
> +		#size-cells = <1>;

ditto.

> +		compatible = "fsl,qe-siram";
> +		reg = <0x1000 0x800>;
> +	};
> +
>  * QE Firmware Node
>  
>  This node defines a firmware binary that is embedded in the device tree, for
> -- 
> 2.1.0.27.g96db324
> 
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt
index 4f89302..5e00fc8 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt
@@ -69,6 +69,59 @@  Example:
 	};
      };
 
+* Interrupt Controller (IC)
+
+Required properties:
+- compatible : should be "fsl,qe-ic".
+- reg : Address range of IC register set.
+- interrupts : interrupts generated by the device.
+
+Example:
+
+	qeic: interrupt-controller@80 {
+		interrupt-controller;
+		compatible = "fsl,qe-ic";
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x80 0x80>;
+		interrupts = <95 2 0 0  94 2 0 0>; //high:79 low:78
+	};
+
+* Serial Interface Block (SI)
+
+The SI manages the routing of eight TDM lines to the QE block serial drivers
+, the MCC and the UCCs, for receive and transmit.
+
+Required properties:
+- compatible : should be "fsl,qe-si".
+- reg : Address range of SI register set.
+
+Example:
+
+	si1: si@700 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,qe-si";
+		reg = <0x700 0x80>;
+	};
+
+* Serial Interface Block RAM(SIRAM)
+
+store the routing entries of SI
+
+Required properties:
+- compatible : should be "fsl,qe-siram".
+- reg : Address range of SI RAM.
+
+Example:
+
+	siram1: siram@1000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,qe-siram";
+		reg = <0x1000 0x800>;
+	};
+
 * QE Firmware Node
 
 This node defines a firmware binary that is embedded in the device tree, for