@@ -4,6 +4,6 @@
# SPDX-License-Identifier: GPL-2.0+
#
-obj-y += car.o dram.o msg_port.o quark.o
+obj-y += car.o dram.o irq.o msg_port.o quark.o
obj-y += mrc.o mrc_util.o hte.o smc.o
obj-$(CONFIG_PCI) += pci.o
new file mode 100644
@@ -0,0 +1,173 @@
+/*
+ * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <malloc.h>
+#include <asm/io.h>
+#include <asm/pci.h>
+#include <asm/post.h>
+#include <asm/processor.h>
+#include <asm/pirq_routing.h>
+#include <asm/arch/device.h>
+#include <asm/arch/quark.h>
+#include <asm/arch/irq.h>
+
+static struct irq_routing_table *pirq_routing_table;
+
+bool pirq_check_irq_routed(int link, u8 irq)
+{
+ u8 pirq;
+
+ pirq = x86_pci_read_config8(QUARK_LEGACY_BRIDGE, LINK_N2V(link));
+ pirq &= 0xf;
+
+ /* IRQ# 0/1/2/8/13 are reserved */
+ if (pirq < 3 || pirq == 8 || pirq == 13)
+ return false;
+
+ return pirq == irq ? true : false;
+}
+
+int pirq_translate_link(int link)
+{
+ return LINK_V2N(link);
+}
+
+void pirq_assign_irq(int link, u8 irq)
+{
+ /* IRQ# 0/1/2/8/13 are reserved */
+ if (irq < 3 || irq == 8 || irq == 13)
+ return;
+
+ x86_pci_write_config8(QUARK_LEGACY_BRIDGE, LINK_N2V(link), irq);
+}
+
+static inline void fill_irq_info(struct irq_info **slotp, int *entries, u8 bus,
+ u8 device, u8 func, u8 pin, u8 pirq)
+{
+ struct irq_info *slot = *slotp;
+
+ slot->bus = bus;
+ slot->devfn = (device << 3) | func;
+ slot->irq[pin - 1].link = LINK_N2V(pirq);
+ slot->irq[pin - 1].bitmap = PIRQ_BITMAP;
+ (*entries)++;
+ (*slotp)++;
+}
+
+__weak int board_fill_irq_info(struct irq_info *slot)
+{
+ return 0;
+}
+
+static int create_pirq_routing_table(void)
+{
+ struct irq_routing_table *rt;
+ struct irq_info *slot;
+ int irq_entries = 0;
+
+ rt = malloc(sizeof(struct irq_routing_table));
+ if (!rt)
+ return -ENOMEM;
+ memset((char *)rt, 0, sizeof(struct irq_routing_table));
+
+ /* Populate the PIRQ table fields */
+ rt->signature = PIRQ_SIGNATURE;
+ rt->version = PIRQ_VERSION;
+ rt->rtr_bus = 0;
+ rt->rtr_devfn = (QUARK_LGC_BRIDGE_DEV << 3) | QUARK_LGC_BRIDGE_FUNC;
+ rt->rtr_vendor = PCI_VENDOR_ID_INTEL;
+ rt->rtr_device = PCI_DEVICE_ID_INTEL_ICH7_31;
+
+ slot = rt->slots;
+
+ /* Now fill in the irq_info entries in the PIRQ table */
+ fill_irq_info(&slot, &irq_entries, 0, QUARK_DEV_20,
+ QUARK_MMC_SDIO_FUNC, INTA, PIRQE);
+ fill_irq_info(&slot, &irq_entries, 0, QUARK_DEV_20,
+ QUARK_UART0_FUNC, INTB, PIRQF);
+ fill_irq_info(&slot, &irq_entries, 0, QUARK_DEV_20,
+ QUARK_USB_DEVICE_FUNC, INTC, PIRQG);
+ fill_irq_info(&slot, &irq_entries, 0, QUARK_DEV_20,
+ QUARK_USB_EHCI_FUNC, INTD, PIRQH);
+ fill_irq_info(&slot, &irq_entries, 0, QUARK_DEV_20,
+ QUARK_USB_OHCI_FUNC, INTD, PIRQH);
+ fill_irq_info(&slot, &irq_entries, 0, QUARK_DEV_20,
+ QUARK_UART1_FUNC, INTB, PIRQF);
+ fill_irq_info(&slot, &irq_entries, 0, QUARK_DEV_20,
+ QUARK_EMAC0_FUNC, INTC, PIRQG);
+ fill_irq_info(&slot, &irq_entries, 0, QUARK_DEV_20,
+ QUARK_EMAC1_FUNC, INTC, PIRQG);
+
+ fill_irq_info(&slot, &irq_entries, 0, QUARK_DEV_21,
+ QUARK_SPI0_FUNC, INTA, PIRQE);
+ fill_irq_info(&slot, &irq_entries, 0, QUARK_DEV_21,
+ QUARK_SPI1_FUNC, INTA, PIRQE);
+ fill_irq_info(&slot, &irq_entries, 0, QUARK_DEV_21,
+ QUARK_I2C_GPIO_FUNC, INTC, PIRQG);
+
+ /*
+ * TODO:
+ *
+ * For some unknown reason, the PCI enumeration process hangs
+ * when it scans to the PCIe root port 0 (D23:F0) & 1 (D23:F1).
+ *
+ * For now we just skip these two devices, and this needs to
+ * be revisited later.
+ */
+#ifdef TODO
+ fill_irq_info(&slot, &irq_entries, 0, QUARK_DEV_23,
+ QUARK_PCIE0_FUNC, INTA, PIRQA);
+ fill_irq_info(&slot, &irq_entries, 0, QUARK_DEV_23,
+ QUARK_PCIE1_FUNC, INTA, PIRQA);
+#endif
+
+ /* Call board-specific routine to fill in add-in card's irq info */
+ irq_entries += board_fill_irq_info(slot);
+
+ rt->size = irq_entries * sizeof(struct irq_info) + 32;
+
+ pirq_routing_table = rt;
+
+ return 0;
+}
+
+void pirq_init(void)
+{
+ struct quark_rcba *rcba;
+ u32 base;
+
+ base = x86_pci_read_config32(QUARK_LEGACY_BRIDGE, LB_RCBA);
+ base &= ~MEM_BAR_EN;
+ rcba = (struct quark_rcba *)base;
+
+ /*
+ * Route Quark PCI device interrupt pin to PIRQ
+ *
+ * Route device#23's INTA/B/C/D to PIRQA/B/C/D
+ * Route device#20,21's INTA/B/C/D to PIRQE/F/G/H
+ */
+ writew(PIRQC, &rcba->rmu_ir);
+ writew(PIRQA | (PIRQB << 4) | (PIRQC << 8) | (PIRQD << 12),
+ &rcba->d23_ir);
+ writew(PIRQD, &rcba->core_ir);
+ writew(PIRQE | (PIRQF << 4) | (PIRQG << 8) | (PIRQH << 12),
+ &rcba->d20d21_ir);
+
+ if (create_pirq_routing_table()) {
+ debug("Failed to create pirq routing table\n");
+ } else {
+ /* Route PIRQ */
+ pirq_route_irqs(pirq_routing_table->slots,
+ get_irq_slot_count(pirq_routing_table));
+ }
+}
+
+u32 write_pirq_routing_table(u32 addr)
+{
+ return copy_pirq_routing_table(addr, pirq_routing_table);
+}
@@ -13,6 +13,7 @@
#include <asm/post.h>
#include <asm/processor.h>
#include <asm/arch/device.h>
+#include <asm/arch/irq.h>
#include <asm/arch/msg_port.h>
#include <asm/arch/quark.h>
@@ -147,3 +148,10 @@ int cpu_eth_init(bd_t *bis)
else
return 0;
}
+
+int arch_misc_init(void)
+{
+ pirq_init();
+
+ return 0;
+}
@@ -9,20 +9,60 @@
#include <pci.h>
-#define QUARK_HOST_BRIDGE PCI_BDF(0, 0, 0)
-#define QUARK_MMC_SDIO PCI_BDF(0, 20, 0)
-#define QUARK_UART0 PCI_BDF(0, 20, 1)
-#define QUARK_USB_DEVICE PCI_BDF(0, 20, 2)
-#define QUARK_USB_EHCI PCI_BDF(0, 20, 3)
-#define QUARK_USB_OHCI PCI_BDF(0, 20, 4)
-#define QUARK_UART1 PCI_BDF(0, 20, 5)
-#define QUARK_EMAC0 PCI_BDF(0, 20, 6)
-#define QUARK_EMAC1 PCI_BDF(0, 20, 7)
-#define QUARK_SPI0 PCI_BDF(0, 21, 0)
-#define QUARK_SPI1 PCI_BDF(0, 21, 1)
-#define QUARK_I2C_GPIO PCI_BDF(0, 21, 2)
-#define QUARK_PCIE0 PCI_BDF(0, 23, 0)
-#define QUARK_PCIE1 PCI_BDF(0, 23, 1)
-#define QUARK_LEGACY_BRIDGE PCI_BDF(0, 31, 0)
+#define QUARK_HOST_BRIDGE_DEV 0
+#define QUARK_HOST_BRIDGE_FUNC 0
+
+#define QUARK_DEV_20 20
+#define QUARK_MMC_SDIO_FUNC 0
+#define QUARK_UART0_FUNC 1
+#define QUARK_USB_DEVICE_FUNC 2
+#define QUARK_USB_EHCI_FUNC 3
+#define QUARK_USB_OHCI_FUNC 4
+#define QUARK_UART1_FUNC 5
+#define QUARK_EMAC0_FUNC 6
+#define QUARK_EMAC1_FUNC 7
+
+#define QUARK_DEV_21 21
+#define QUARK_SPI0_FUNC 0
+#define QUARK_SPI1_FUNC 1
+#define QUARK_I2C_GPIO_FUNC 2
+
+#define QUARK_DEV_23 23
+#define QUARK_PCIE0_FUNC 0
+#define QUARK_PCIE1_FUNC 1
+
+#define QUARK_LGC_BRIDGE_DEV 31
+#define QUARK_LGC_BRIDGE_FUNC 0
+
+#define QUARK_HOST_BRIDGE \
+ PCI_BDF(0, QUARK_HOST_BRIDGE_DEV, QUARK_HOST_BRIDGE_FUNC)
+#define QUARK_MMC_SDIO \
+ PCI_BDF(0, QUARK_DEV_20, QUARK_MMC_SDIO_FUNC)
+#define QUARK_UART0 \
+ PCI_BDF(0, QUARK_DEV_20, QUARK_UART0_FUNC)
+#define QUARK_USB_DEVICE \
+ PCI_BDF(0, QUARK_DEV_20, QUARK_USB_DEVICE_FUNC)
+#define QUARK_USB_EHCI \
+ PCI_BDF(0, QUARK_DEV_20, QUARK_USB_EHCI_FUNC)
+#define QUARK_USB_OHCI \
+ PCI_BDF(0, QUARK_DEV_20, QUARK_USB_OHCI_FUNC)
+#define QUARK_UART1 \
+ PCI_BDF(0, QUARK_DEV_20, QUARK_UART1_FUNC)
+#define QUARK_EMAC0 \
+ PCI_BDF(0, QUARK_DEV_20, QUARK_EMAC0_FUNC)
+#define QUARK_EMAC1 \
+ PCI_BDF(0, QUARK_DEV_20, QUARK_EMAC1_FUNC)
+#define QUARK_SPI0 \
+ PCI_BDF(0, QUARK_DEV_21, QUARK_SPI0_FUNC)
+#define QUARK_SPI1 \
+ PCI_BDF(0, QUARK_DEV_21, QUARK_SPI1_FUNC)
+#define QUARK_I2C_GPIO \
+ PCI_BDF(0, QUARK_DEV_21, QUARK_I2C_GPIO_FUNC)
+#define QUARK_PCIE0 \
+ PCI_BDF(0, QUARK_DEV_23, QUARK_PCIE0_FUNC)
+#define QUARK_PCIE1 \
+ PCI_BDF(0, QUARK_DEV_23, QUARK_PCIE1_FUNC)
+#define QUARK_LEGACY_BRIDGE \
+ PCI_BDF(0, QUARK_LGC_BRIDGE_DEV, QUARK_LGC_BRIDGE_FUNC)
#endif /* _QUARK_DEVICE_H_ */
new file mode 100644
@@ -0,0 +1,55 @@
+/*
+ * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _ARCH_IRQ_H_
+#define _ARCH_IRQ_H_
+
+enum pci_int_pin {
+ INTX,
+ INTA,
+ INTB,
+ INTC,
+ INTD
+};
+
+enum pirq_pin {
+ PIRQA,
+ PIRQB,
+ PIRQC,
+ PIRQD,
+ PIRQE,
+ PIRQF,
+ PIRQG,
+ PIRQH
+};
+
+/* PIRQ link number and value conversion */
+#define LINK_V2N(link) (link - 0x60)
+#define LINK_N2V(link) (link + 0x60)
+
+#define PIRQ_BITMAP 0xdef8
+
+struct irq_info;
+
+/**
+ * board_fill_irq_info() - Board-specific irq_info fill routine
+ *
+ * This fills the irq_info table for any board-specific add-in cards.
+ *
+ * @slot: pointer to the struct irq_info that is to be filled in
+ * @return: number of entries were written to the struct irq_info
+ */
+int board_fill_irq_info(struct irq_info *slot);
+
+/**
+ * pirq_init() - Initialize platform PIRQ routing
+ *
+ * This initializes the PIRQ routing on the platform and configures all PCI
+ * devices' interrupt line register to a working IRQ number on the 8259 PIC.
+ */
+void pirq_init(void);
+
+#endif /* _ARCH_IRQ_H_ */
@@ -76,4 +76,19 @@
#define LB_BC 0xd8
#define LB_RCBA 0xf0
+#ifndef __ASSEMBLY__
+
+/* Root Complex Register Block */
+struct quark_rcba {
+ u32 rctl;
+ u32 esd;
+ u32 rsvd1[3150];
+ u16 rmu_ir;
+ u16 d23_ir;
+ u16 core_ir;
+ u16 d20d21_ir;
+};
+
+#endif /* __ASSEMBLY__ */
+
#endif /* _QUARK_H_ */
@@ -7,3 +7,4 @@ CONFIG_DEFAULT_DEVICE_TREE="galileo"
CONFIG_ETH_DESIGNWARE=y
CONFIG_NETDEVICES=y
CONFIG_NET=y
+CONFIG_GENERATE_PIRQ_TABLE=y
@@ -15,6 +15,7 @@
#define CONFIG_SYS_MONITOR_LEN (1 << 20)
#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_ARCH_MISC_INIT
#define CONFIG_NR_DRAM_BANKS 1
Intel Quark SoC has the same interrupt routing mechanism as the Queensbay platform, only the difference is that PCI devices' INTA/B/C/D are harcoded and cannot be changed freely. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> --- arch/x86/cpu/quark/Makefile | 2 +- arch/x86/cpu/quark/irq.c | 173 +++++++++++++++++++++++++++++++ arch/x86/cpu/quark/quark.c | 8 ++ arch/x86/include/asm/arch-quark/device.h | 70 ++++++++++--- arch/x86/include/asm/arch-quark/irq.h | 55 ++++++++++ arch/x86/include/asm/arch-quark/quark.h | 15 +++ configs/galileo_defconfig | 1 + include/configs/galileo.h | 1 + 8 files changed, 309 insertions(+), 16 deletions(-) create mode 100644 arch/x86/cpu/quark/irq.c create mode 100644 arch/x86/include/asm/arch-quark/irq.h