[4/6] usb: gadget: Drop all gadget_is_*() functions

The only actually used gadget_is_*() functions are the one for DWC3
used in epautoconf.c usb_ep_autoconfig() and one for MUSB in ether.c.
The DWC3 one should be fixed in some separate patch.

Inline the gadget_is_dwc3() and stop using ifdefs in favor of
IS_ENABLED() macro.

The rest of gadget_is_*() calls in usb_ep_autoconfig() can never
be anything but 0, since those gadgets are not supported in U-Boot,
so remove all that unused code. Remove gadget_chips.h as well.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
---
Cc: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: Lukasz Majewski <lukma@denx.de>
Cc: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: u-boot@lists.denx.de
---
 drivers/usb/gadget/epautoconf.c   |  40 +-------
 drivers/usb/gadget/ether.c        |   8 +-
 drivers/usb/gadget/gadget_chips.h | 148 ------------------------------
 3 files changed, 6 insertions(+), 190 deletions(-)
 delete mode 100644 drivers/usb/gadget/gadget_chips.h

Hi Marek,

Thank you for the patch.

On dim., juin 09, 2024 at 23:32, Marek Vasut <marek.vasut+renesas@mailbox.org> wrote:

> The only actually used gadget_is_*() functions are the one for DWC3
> used in epautoconf.c usb_ep_autoconfig() and one for MUSB in ether.c.
> The DWC3 one should be fixed in some separate patch.
>
> Inline the gadget_is_dwc3() and stop using ifdefs in favor of
> IS_ENABLED() macro.
>
> The rest of gadget_is_*() calls in usb_ep_autoconfig() can never
> be anything but 0, since those gadgets are not supported in U-Boot,
> so remove all that unused code. Remove gadget_chips.h as well.
>
> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>

Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> # on vim3

> ---
> Cc: Alexander Sverdlin <alexander.sverdlin@siemens.com>
> Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
> Cc: Lukasz Majewski <lukma@denx.de>
> Cc: Mattijs Korpershoek <mkorpershoek@baylibre.com>
> Cc: Nishanth Menon <nm@ti.com>
> Cc: Simon Glass <sjg@chromium.org>
> Cc: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
> Cc: Tom Rini <trini@konsulko.com>
> Cc: u-boot@lists.denx.de
> ---
>  drivers/usb/gadget/epautoconf.c   |  40 +-------
>  drivers/usb/gadget/ether.c        |   8 +-
>  drivers/usb/gadget/gadget_chips.h | 148 ------------------------------
>  3 files changed, 6 insertions(+), 190 deletions(-)
>  delete mode 100644 drivers/usb/gadget/gadget_chips.h
>
> diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
> index 0a70035ce04..09950ceeaed 100644
> --- a/drivers/usb/gadget/epautoconf.c
> +++ b/drivers/usb/gadget/epautoconf.c
> @@ -12,7 +12,6 @@
>  #include <linux/errno.h>
>  #include <linux/usb/gadget.h>
>  #include <asm/unaligned.h>
> -#include "gadget_chips.h"
>  
>  #define isdigit(c)      ('0' <= (c) && (c) <= '9')
>  
> @@ -222,41 +221,9 @@ struct usb_ep *usb_ep_autoconfig(
>  	/* First, apply chip-specific "best usage" knowledge.
>  	 * This might make a good usb_gadget_ops hook ...
>  	 */
> -	if (gadget_is_net2280(gadget) && type == USB_ENDPOINT_XFER_INT) {
> -		/* ep-e, ep-f are PIO with only 64 byte fifos */
> -		ep = find_ep(gadget, "ep-e");
> -		if (ep && ep_matches(gadget, ep, desc))
> -			return ep;
> -		ep = find_ep(gadget, "ep-f");
> -		if (ep && ep_matches(gadget, ep, desc))
> -			return ep;
> -
> -	} else if (gadget_is_goku(gadget)) {
> -		if (USB_ENDPOINT_XFER_INT == type) {
> -			/* single buffering is enough */
> -			ep = find_ep(gadget, "ep3-bulk");
> -			if (ep && ep_matches(gadget, ep, desc))
> -				return ep;
> -		} else if (USB_ENDPOINT_XFER_BULK == type
> -				&& (USB_DIR_IN & desc->bEndpointAddress)) {
> -			/* DMA may be available */
> -			ep = find_ep(gadget, "ep2-bulk");
> -			if (ep && ep_matches(gadget, ep, desc))
> -				return ep;
> -		}
> -
> -	} else if (gadget_is_sh(gadget) && USB_ENDPOINT_XFER_INT == type) {
> -		/* single buffering is enough; maybe 8 byte fifo is too */
> -		ep = find_ep(gadget, "ep3in-bulk");
> -		if (ep && ep_matches(gadget, ep, desc))
> -			return ep;
> -
> -	} else if (gadget_is_mq11xx(gadget) && USB_ENDPOINT_XFER_INT == type) {
> -		ep = find_ep(gadget, "ep1-bulk");
> -		if (ep && ep_matches(gadget, ep, desc))
> -			return ep;
> -#ifndef CONFIG_SPL_BUILD
> -	} else if (gadget_is_dwc3(gadget)) {
> +	if (!IS_ENABLED(CONFIG_SPL_BUILD) &&
> +	    IS_ENABLED(CONFIG_USB_DWC3_GADGET) &&
> +	    !strcmp("dwc3-gadget", gadget->name)) {
>  		const char *name = NULL;
>  		/*
>  		 * First try standard, common configuration: ep1in-bulk,
> @@ -278,7 +245,6 @@ struct usb_ep *usb_ep_autoconfig(
>  			ep = find_ep(gadget, name);
>  		if (ep && ep_matches(gadget, ep, desc))
>  			return ep;
> -#endif
>  	}
>  
>  	if (gadget->ops->match_ep)
> diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
> index e76464e121b..b7b7bacb00d 100644
> --- a/drivers/usb/gadget/ether.c
> +++ b/drivers/usb/gadget/ether.c
> @@ -1989,13 +1989,11 @@ static int eth_bind(struct usb_gadget *gadget)
>  	 * standard protocol is _strongly_ preferred for interop purposes.
>  	 * (By everyone except Microsoft.)
>  	 */
> -	if (gadget_is_musbhdrc(gadget)) {
> +
> +	if (IS_ENABLED(CONFIG_USB_MUSB_GADGET) &&
> +	    !strcmp("musb-hdrc", gadget->name)) {
>  		/* reduce tx dma overhead by avoiding special cases */
>  		zlp = 0;
> -	} else if (gadget_is_sh(gadget)) {
> -		/* sh doesn't support multiple interfaces or configs */
> -		cdc = 0;
> -		rndis = 0;
>  	}
>  
>  	gcnum = (U_BOOT_VERSION_NUM << 4) | U_BOOT_VERSION_NUM_PATCH;
> diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
> deleted file mode 100644
> index 316051686c4..00000000000
> --- a/drivers/usb/gadget/gadget_chips.h
> +++ /dev/null
> @@ -1,148 +0,0 @@
> -/*
> - * USB device controllers have lots of quirks.  Use these macros in
> - * gadget drivers or other code that needs to deal with them, and which
> - * autoconfigures instead of using early binding to the hardware.
> - *
> - * This SHOULD eventually work like the ARM mach_is_*() stuff, driven by
> - * some config file that gets updated as new hardware is supported.
> - * (And avoiding all runtime comparisons in typical one-choice configs!)
> - *
> - * NOTE:  some of these controller drivers may not be available yet.
> - * Some are available on 2.4 kernels; several are available, but not
> - * yet pushed in the 2.6 mainline tree.
> - *
> - * Ported to U-Boot by: Thomas Smits <ts.smits@gmail.com> and
> - *                      Remy Bohmer <linux@bohmer.net>
> - */
> -#ifdef CONFIG_USB_GADGET_NET2280
> -#define	gadget_is_net2280(g)	(!strcmp("net2280", (g)->name))
> -#else
> -#define	gadget_is_net2280(g)	0
> -#endif
> -
> -#ifdef CONFIG_USB_GADGET_AMD5536UDC
> -#define	gadget_is_amd5536udc(g)	(!strcmp("amd5536udc", (g)->name))
> -#else
> -#define	gadget_is_amd5536udc(g)	0
> -#endif
> -
> -#ifdef CONFIG_USB_GADGET_DUMMY_HCD
> -#define	gadget_is_dummy(g)	(!strcmp("dummy_udc", (g)->name))
> -#else
> -#define	gadget_is_dummy(g)	0
> -#endif
> -
> -#ifdef CONFIG_USB_GADGET_GOKU
> -#define	gadget_is_goku(g)	(!strcmp("goku_udc", (g)->name))
> -#else
> -#define	gadget_is_goku(g)	0
> -#endif
> -
> -/* SH3 UDC -- not yet ported 2.4 --> 2.6 */
> -#ifdef CONFIG_USB_GADGET_SUPERH
> -#define	gadget_is_sh(g)		(!strcmp("sh_udc", (g)->name))
> -#else
> -#define	gadget_is_sh(g)		0
> -#endif
> -
> -/* handhelds.org tree (?) */
> -#ifdef CONFIG_USB_GADGET_MQ11XX
> -#define	gadget_is_mq11xx(g)	(!strcmp("mq11xx_udc", (g)->name))
> -#else
> -#define	gadget_is_mq11xx(g)	0
> -#endif
> -
> -#ifdef CONFIG_USB_GADGET_OMAP
> -#define	gadget_is_omap(g)	(!strcmp("omap_udc", (g)->name))
> -#else
> -#define	gadget_is_omap(g)	0
> -#endif
> -
> -/* not yet ported 2.4 --> 2.6 */
> -#ifdef CONFIG_USB_GADGET_N9604
> -#define	gadget_is_n9604(g)	(!strcmp("n9604_udc", (g)->name))
> -#else
> -#define	gadget_is_n9604(g)	0
> -#endif
> -
> -#ifdef CONFIG_USB_GADGET_ATMEL_USBA
> -#define gadget_is_atmel_usba(g)	(!strcmp("atmel_usba_udc", (g)->name))
> -#else
> -#define gadget_is_atmel_usba(g)	0
> -#endif
> -
> -#ifdef CONFIG_USB_GADGET_AT91
> -#define gadget_is_at91(g)	(!strcmp("at91_udc", (g)->name))
> -#else
> -#define gadget_is_at91(g)	0
> -#endif
> -
> -/* status unclear */
> -#ifdef CONFIG_USB_GADGET_IMX
> -#define gadget_is_imx(g)	(!strcmp("imx_udc", (g)->name))
> -#else
> -#define gadget_is_imx(g)	0
> -#endif
> -
> -#ifdef CONFIG_USB_GADGET_FSL_USB2
> -#define gadget_is_fsl_usb2(g)	(!strcmp("fsl-usb2-udc", (g)->name))
> -#else
> -#define gadget_is_fsl_usb2(g)	0
> -#endif
> -
> -/* Mentor high speed function controller */
> -/* from Montavista kernel (?) */
> -#ifdef CONFIG_USB_GADGET_MUSBHSFC
> -#define gadget_is_musbhsfc(g)	(!strcmp("musbhsfc_udc", (g)->name))
> -#else
> -#define gadget_is_musbhsfc(g)	0
> -#endif
> -
> -/* Mentor high speed "dual role" controller, in peripheral role */
> -#ifdef CONFIG_USB_MUSB_GADGET
> -#define gadget_is_musbhdrc(g)	(!strcmp("musb-hdrc", (g)->name))
> -#else
> -#define gadget_is_musbhdrc(g)	0
> -#endif
> -
> -#ifdef CONFIG_USB_GADGET_M66592
> -#define	gadget_is_m66592(g)	(!strcmp("m66592_udc", (g)->name))
> -#else
> -#define	gadget_is_m66592(g)	0
> -#endif
> -
> -#ifdef CONFIG_CI_UDC
> -#define gadget_is_ci(g)        (!strcmp("ci_udc", (g)->name))
> -#else
> -#define gadget_is_ci(g)        0
> -#endif
> -
> -#ifdef CONFIG_USB_DWC3_GADGET
> -#define gadget_is_dwc3(g)        (!strcmp("dwc3-gadget", (g)->name))
> -#else
> -#define gadget_is_dwc3(g)        0
> -#endif
> -
> -#ifdef CONFIG_USB_CDNS3_GADGET
> -#define gadget_is_cdns3(g)        (!strcmp("cdns3-gadget", (g)->name))
> -#else
> -#define gadget_is_cdns3(g)        0
> -#endif
> -
> -#ifdef CONFIG_USB_GADGET_MAX3420
> -#define gadget_is_max3420(g)        (!strcmp("max3420-udc", (g)->name))
> -#else
> -#define gadget_is_max3420(g)        0
> -#endif
> -
> -#ifdef CONFIG_USB_MTU3_GADGET
> -#define gadget_is_mtu3(g)        (!strcmp("mtu3-gadget", (g)->name))
> -#else
> -#define gadget_is_mtu3(g)        0
> -#endif
> -
> -#ifdef CONFIG_USB_GADGET_DWC2_OTG
> -#define gadget_is_dwc2(g)        (!strcmp("dwc2-udc", (g)->name))
> -#else
> -#define gadget_is_dwc2(g)        0
> -#endif
> -- 
> 2.43.0