@@ -9,6 +9,7 @@
#include "icssg_switch_map.h"
#include "icss_mii_rt.h"
#include <dm/device_compat.h>
+#include <linux/iopoll.h>
/* TX IPG Values to be set for 100M and 1G link speeds. These values are
* in ocp_clk cycles. So need change if ocp_clk is changed for a specific
@@ -404,3 +405,70 @@ int emac_set_port_state(struct prueth_priv *priv,
return ret;
}
+
+int icssg_send_fdb_msg(struct prueth_priv *priv, struct mgmt_cmd *cmd,
+ struct mgmt_cmd_rsp *rsp)
+{
+ struct prueth *prueth = priv->prueth;
+ int slice = priv->port_id;
+ int ret, addr;
+
+ addr = icssg_queue_pop(prueth, slice == 0 ?
+ ICSSG_CMD_POP_SLICE0 : ICSSG_CMD_POP_SLICE1);
+ if (addr < 0)
+ return addr;
+
+ /* First 4 bytes have FW owned buffer linking info which should
+ * not be touched
+ */
+ memcpy_toio((void __iomem *)prueth->shram.pa + addr + 4, cmd, sizeof(*cmd));
+ icssg_queue_push(prueth, slice == 0 ?
+ ICSSG_CMD_PUSH_SLICE0 : ICSSG_CMD_PUSH_SLICE1, addr);
+ ret = read_poll_timeout(icssg_queue_pop, addr, addr >= 0,
+ 2000, 20000000, prueth, slice == 0 ?
+ ICSSG_RSP_POP_SLICE0 : ICSSG_RSP_POP_SLICE1);
+
+ if (ret) {
+ dev_err(prueth->dev, "Timedout sending HWQ message\n");
+ return ret;
+ }
+
+ memcpy_fromio(rsp, (void __iomem *)prueth->shram.pa + addr, sizeof(*rsp));
+ /* Return buffer back for to pool */
+ icssg_queue_push(prueth, slice == 0 ?
+ ICSSG_RSP_PUSH_SLICE0 : ICSSG_RSP_PUSH_SLICE1, addr);
+
+ return 0;
+}
+
+int emac_fdb_flow_id_updated(struct prueth_priv *priv)
+{
+ struct mgmt_cmd_rsp fdb_cmd_rsp = { 0 };
+ struct prueth *prueth = priv->prueth;
+ struct mgmt_cmd fdb_cmd = { 0 };
+ int slice = priv->port_id;
+ int ret = 0;
+
+ fdb_cmd.header = ICSSG_FW_MGMT_CMD_HEADER;
+ fdb_cmd.type = ICSSG_FW_MGMT_FDB_CMD_TYPE_RX_FLOW;
+ fdb_cmd.seqnum = ++(prueth->icssg_hwcmdseq);
+ fdb_cmd.param = 0;
+
+ fdb_cmd.param |= (slice << 4);
+ fdb_cmd.cmd_args[0] = 0;
+
+ ret = icssg_send_fdb_msg(priv, &fdb_cmd, &fdb_cmd_rsp);
+ if (ret)
+ return ret;
+
+ if (fdb_cmd.seqnum != fdb_cmd_rsp.seqnum) {
+ dev_err(prueth->dev, "seqnum doesn't match, cmd.seqnum %d != rsp.seqnum %d\n",
+ fdb_cmd.seqnum, fdb_cmd_rsp.seqnum);
+ return -EINVAL;
+ }
+
+ if (fdb_cmd_rsp.status == 1)
+ return 0;
+
+ return -EINVAL;
+}
@@ -80,6 +80,7 @@ struct icssg_rxq_ctx {
#define ICSSG_FW_MGMT_FDB_CMD_TYPE 0x03
#define ICSSG_FW_MGMT_CMD_TYPE 0x04
#define ICSSG_FW_MGMT_PKT 0x80000000
+#define ICSSG_FW_MGMT_FDB_CMD_TYPE_RX_FLOW 0x05
struct icssg_r30_cmd {
u32 cmd[4];
@@ -156,6 +157,23 @@ struct icssg_setclock_desc {
u32 CMP0_new;
} __packed;
+struct mgmt_cmd {
+ u8 param;
+ u8 seqnum;
+ u8 type;
+ u8 header;
+ u32 cmd_args[3];
+} __packed;
+
+struct mgmt_cmd_rsp {
+ u32 reserved;
+ u8 status;
+ u8 seqnum;
+ u8 type;
+ u8 header;
+ u32 cmd_args[3];
+} __packed;
+
#define ICSSG_CMD_POP_SLICE0 56
#define ICSSG_CMD_POP_SLICE1 60
@@ -374,6 +374,12 @@ static int prueth_start(struct udevice *dev)
dev_info(dev, "K3 ICSSG: rflow_id_base: %u, chn_name = %s\n",
dma_rx_cfg_data->flow_id_base, chn_name);
+ ret = emac_fdb_flow_id_updated(priv);
+ if (ret) {
+ dev_err(dev, "Failed to update Rx Flow ID %d", ret);
+ goto phy_fail;
+ }
+
ret = phy_startup(priv->phydev);
if (ret) {
dev_err(dev, "phy_startup failed\n");
@@ -65,6 +65,7 @@ struct prueth {
u8 pru_core_id;
u8 rtu_core_id;
u8 txpru_core_id;
+ u8 icssg_hwcmdseq;
};
struct prueth_priv {
@@ -88,4 +89,9 @@ int icssg_queue_pop(struct prueth *prueth, u8 queue);
void icssg_queue_push(struct prueth *prueth, int queue, u16 addr);
u32 icssg_queue_level(struct prueth *prueth, int queue);
+/* FDB helpers */
+int icssg_send_fdb_msg(struct prueth_priv *priv, struct mgmt_cmd *cmd,
+ struct mgmt_cmd_rsp *rsp);
+int emac_fdb_flow_id_updated(struct prueth_priv *priv);
+
#endif /* __NET_TI_ICSSG_PRUETH_H */
ICSSG firmware supports FDB commands. Add support to send FDB commands from driver. Once rx_flow_id is obtained from dma, let firmware know that we are using this rx_flow_id by sending a FDB command. Signed-off-by: MD Danish Anwar <danishanwar@ti.com> --- drivers/net/ti/icssg_config.c | 68 +++++++++++++++++++++++++++++++++++ drivers/net/ti/icssg_config.h | 18 ++++++++++ drivers/net/ti/icssg_prueth.c | 6 ++++ drivers/net/ti/icssg_prueth.h | 6 ++++ 4 files changed, 98 insertions(+)