@@ -17,4 +17,7 @@ U_BOOT_DRIVER(rockchip_rk3328_grf) = {
.name = "rockchip_rk3328_grf",
.id = UCLASS_SYSCON,
.of_match = rk3328_syscon_ids,
+#if CONFIG_IS_ENABLED(OF_REAL)
+ .bind = dm_scan_fdt_dev,
+#endif
};
@@ -57,6 +57,7 @@ CONFIG_FASTBOOT_BUF_ADDR=0x800800
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
CONFIG_ROCKCHIP_GPIO=y
CONFIG_SYS_I2C_ROCKCHIP=y
+# CONFIG_ROCKCHIP_IODOMAIN is not set
CONFIG_MMC_DW=y
CONFIG_MMC_DW_ROCKCHIP=y
CONFIG_PHY_MOTORCOMM=y
@@ -104,7 +104,7 @@ config ROCKCHIP_OTP
config ROCKCHIP_IODOMAIN
bool "Rockchip IO-domain driver support"
depends on DM_REGULATOR && ARCH_ROCKCHIP
- default y if ROCKCHIP_RK3568
+ default y if ROCKCHIP_RK3328 || ROCKCHIP_RK3568
help
Enable support for IO-domains in Rockchip SoCs. It is necessary
for the IO-domain setting of the SoC to match the voltage supplied
@@ -27,6 +27,10 @@
#define MAX_VOLTAGE_1_8 1980000
#define MAX_VOLTAGE_3_3 3600000
+#define RK3328_SOC_CON4 0x410
+#define RK3328_SOC_CON4_VCCIO2 BIT(7)
+#define RK3328_SOC_VCCIO2_SUPPLY_NUM 1
+
#define RK3399_PMUGRF_CON0 0x180
#define RK3399_PMUGRF_CON0_VSEL BIT(8)
#define RK3399_PMUGRF_VSEL_SUPPLY_NUM 9
@@ -95,6 +99,22 @@ static int rockchip_iodomain_write(struct regmap *grf, uint offset, int idx, int
return regmap_write(grf, offset, val);
}
+static int rk3328_iodomain_write(struct regmap *grf, uint offset, int idx, int uV)
+{
+ int ret = rockchip_iodomain_write(grf, offset, idx, uV);
+
+ if (!ret && idx == RK3328_SOC_VCCIO2_SUPPLY_NUM) {
+ /*
+ * set vccio2 iodomain to also use this framework
+ * instead of a special gpio.
+ */
+ u32 val = RK3328_SOC_CON4_VCCIO2 | (RK3328_SOC_CON4_VCCIO2 << 16);
+ ret = regmap_write(grf, RK3328_SOC_CON4, val);
+ }
+
+ return ret;
+}
+
static int rk3399_pmu_iodomain_write(struct regmap *grf, uint offset, int idx, int uV)
{
int ret = rockchip_iodomain_write(grf, offset, idx, uV);
@@ -111,6 +131,20 @@ static int rk3399_pmu_iodomain_write(struct regmap *grf, uint offset, int idx, i
return ret;
}
+static const struct rockchip_iodomain_soc_data soc_data_rk3328 = {
+ .grf_offset = 0x410,
+ .supply_names = {
+ "vccio1-supply",
+ "vccio2-supply",
+ "vccio3-supply",
+ "vccio4-supply",
+ "vccio5-supply",
+ "vccio6-supply",
+ "pmuio-supply",
+ },
+ .write = rk3328_iodomain_write,
+};
+
static const struct rockchip_iodomain_soc_data soc_data_rk3399 = {
.grf_offset = 0xe640,
.supply_names = {
@@ -156,6 +190,10 @@ static const struct rockchip_iodomain_soc_data soc_data_rk3568_pmu = {
};
static const struct udevice_id rockchip_iodomain_ids[] = {
+ {
+ .compatible = "rockchip,rk3328-io-voltage-domain",
+ .data = (ulong)&soc_data_rk3328,
+ },
{
.compatible = "rockchip,rk3399-io-voltage-domain",
.data = (ulong)&soc_data_rk3399,
Port the RK3328 part of the Rockchip IO-domain driver from linux. This differs from linux version in that pmu io iodomain bit is enabled in the write ops instead of in an init ops as in linux, this way we can avoid keeping a full state of all supply that have been configured. Enable by default on all RK3328 boards, skip rk3328-evb because this target is typically also used on miscellaneous boards and boxes not fully supported by U-Boot. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> --- arch/arm/mach-rockchip/rk3328/syscon_rk3328.c | 3 ++ configs/evb-rk3328_defconfig | 1 + drivers/misc/Kconfig | 2 +- drivers/misc/rockchip-io-domain.c | 38 +++++++++++++++++++ 4 files changed, 43 insertions(+), 1 deletion(-)