@@ -34,6 +34,15 @@
#size-cells = <1>;
bootph-all;
+ nfc_sram: sram@100000 {
+ compatible = "mmio-sram";
+ no-memory-wc;
+ reg = <0x00100000 0x2400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x00100000 0x2400>;
+ };
+
usb1: ohci@400000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00400000 0x100000>;
@@ -50,6 +59,32 @@
status = "disabled";
};
+ ebi: ebi@10000000 {
+ compatible = "atmel,sama5d3-ebi";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ atmel,smc = <&hsmc>;
+ reg = <0x10000000 0x10000000
+ 0x60000000 0x30000000>;
+ ranges = <0x0 0x0 0x10000000 0x10000000
+ 0x1 0x0 0x60000000 0x10000000
+ 0x2 0x0 0x70000000 0x10000000
+ 0x3 0x0 0x80000000 0x10000000>;
+ clocks = <&h32ck>;
+ status = "disabled";
+
+ nand_controller: nand-controller {
+ compatible = "atmel,sama5d3-nand-controller";
+ atmel,nfc-sram = <&nfc_sram>;
+ atmel,nfc-io = <&nfc_io>;
+ ecc-engine = <&pmecc>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+ status = "disabled";
+ };
+ };
+
sdmmc0: sdio-host@a0000000 {
compatible = "atmel,sama5d2-sdhci";
reg = <0xa0000000 0x300>;
@@ -66,6 +101,11 @@
status = "disabled";
};
+ nfc_io: nfc-io@c0000000 {
+ compatible = "atmel,sama5d3-nfc-io", "syscon";
+ reg = <0xc0000000 0x8000000>;
+ };
+
apb {
compatible = "simple-bus";
#address-cells = <1>;
@@ -657,6 +697,22 @@
};
};
+ hsmc: hsmc@f8014000 {
+ compatible = "atmel,sama5d2-smc", "syscon", "simple-mfd";
+ reg = <0xf8014000 0x1000>;
+ interrupts = <17 IRQ_TYPE_LEVEL_HIGH 6>;
+ clocks = <&hsmc_clk>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pmecc: ecc-engine@f8014070 {
+ compatible = "atmel,sama5d2-pmecc";
+ reg = <0xf8014070 0x490>,
+ <0xf8014500 0x200>;
+ };
+ };
+
uart0: serial@f801c000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xf801c000 0x100>;
Required for using the new DM based atmel nand driver. Ported from Linux v6.7-rc4. Signed-off-by: Alexander Dahl <ada@thorsis.com> --- arch/arm/dts/sama5d2.dtsi | 56 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 56 insertions(+)