diff mbox series

[v3,1/2] riscv: Support booting SiFive Unmatched from SPI.

Message ID 20211124223210.5281-2-thomas-git@skibo.net
State Accepted
Commit 6a863894ad53b2d0e6c6d47ad105850053757fec
Delegated to: Andes
Headers show
Series riscv: Support booting SiFive Unmatched from SPI flash. | expand

Commit Message

Thomas Skibo Nov. 24, 2021, 10:32 p.m. UTC 
Configure SPI flash devices into SPL.  Add SPI boot option to spl.c.
Document how to format flash for booting.

Signed-off-by: Thomas Skibo <thomas-git@skibo.net>
---
 .../dts/hifive-unmatched-a00-u-boot.dtsi      | 11 +++++++
 board/sifive/unmatched/spl.c                  |  3 ++
 configs/sifive_unmatched_defconfig            |  6 ++++
 doc/board/sifive/unmatched.rst                | 31 +++++++++++++++++++
 4 files changed, 51 insertions(+)

Comments

Leo Liang Dec. 2, 2021, 8:41 a.m. UTC | #1 
On Wed, Nov 24, 2021 at 02:32:09PM -0800, Thomas Skibo wrote:
> Configure SPI flash devices into SPL.  Add SPI boot option to spl.c.
> Document how to format flash for booting.
> 
> Signed-off-by: Thomas Skibo <thomas-git@skibo.net>
> ---
>  .../dts/hifive-unmatched-a00-u-boot.dtsi      | 11 +++++++
>  board/sifive/unmatched/spl.c                  |  3 ++
>  configs/sifive_unmatched_defconfig            |  6 ++++
>  doc/board/sifive/unmatched.rst                | 31 +++++++++++++++++++
>  4 files changed, 51 insertions(+)

Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
diff mbox series

Patch

diff --git a/arch/riscv/dts/hifive-unmatched-a00-u-boot.dtsi b/arch/riscv/dts/hifive-unmatched-a00-u-boot.dtsi
index c5475aa149..1ee8ab1868 100644
--- a/arch/riscv/dts/hifive-unmatched-a00-u-boot.dtsi
+++ b/arch/riscv/dts/hifive-unmatched-a00-u-boot.dtsi
@@ -16,6 +16,10 @@ 
 		u-boot,dm-spl;
 	};
 
+	config {
+		u-boot,spl-payload-offset = <0x105000>; /* loader2 @1044KB */
+	};
+
 	hfclk {
 		u-boot,dm-spl;
 	};
@@ -30,6 +34,13 @@ 
 	clocks = <&rtcclk>;
 };
 
+&qspi0 {
+	u-boot,dm-spl;
+	flash@0 {
+		u-boot,dm-spl;
+	};
+};
+
 &spi0 {
 	mmc@0 {
 		u-boot,dm-spl;
diff --git a/board/sifive/unmatched/spl.c b/board/sifive/unmatched/spl.c
index d5663274cd..7c0beedc08 100644
--- a/board/sifive/unmatched/spl.c
+++ b/board/sifive/unmatched/spl.c
@@ -22,6 +22,7 @@ 
 #define GEM_PHY_RESET	SIFIVE_GENERIC_GPIO_NR(0, 12)
 
 #define MODE_SELECT_REG		0x1000
+#define MODE_SELECT_SPI		0x6
 #define MODE_SELECT_SD		0xb
 #define MODE_SELECT_MASK	GENMASK(3, 0)
 
@@ -123,6 +124,8 @@  u32 spl_boot_device(void)
 	u32 boot_device = mode_select & MODE_SELECT_MASK;
 
 	switch (boot_device) {
+	case MODE_SELECT_SPI:
+		return BOOT_DEVICE_SPI;
 	case MODE_SELECT_SD:
 		return BOOT_DEVICE_MMC1;
 	default:
diff --git a/configs/sifive_unmatched_defconfig b/configs/sifive_unmatched_defconfig
index 9cc18b029c..d400ed0b23 100644
--- a/configs/sifive_unmatched_defconfig
+++ b/configs/sifive_unmatched_defconfig
@@ -8,6 +8,7 @@  CONFIG_SPL_DM_SPI=y
 CONFIG_DEFAULT_DEVICE_TREE="hifive-unmatched-a00"
 CONFIG_SPL_MMC=y
 CONFIG_SPL=y
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
 CONFIG_AHCI=y
 CONFIG_TARGET_SIFIVE_UNMATCHED=y
@@ -23,17 +24,22 @@  CONFIG_DISPLAY_BOARDINFO=y
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_ID_EEPROM=y
 CONFIG_SPL_SEPARATE_BSS=y
+CONFIG_SPL_DM_SPI_FLASH=y
 CONFIG_SPL_DM_RESET=y
+CONFIG_SPL_SPI_LOAD=y
 CONFIG_CMD_EEPROM=y
 CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_PWM=y
 CONFIG_CMD_GPT_RENAME=y
 CONFIG_CMD_PCI=y
 CONFIG_CMD_USB=y
+CONFIG_USE_ENV_SPI_BUS=y
+CONFIG_ENV_SPI_BUS=1
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SCSI_AHCI=y
 CONFIG_AHCI_PCI=y
 CONFIG_SPL_CLK=y
+CONFIG_SPI_FLASH_ISSI=y
 CONFIG_SYS_I2C_EEPROM_ADDR=0x54
 CONFIG_E1000=y
 CONFIG_NVME=y
diff --git a/doc/board/sifive/unmatched.rst b/doc/board/sifive/unmatched.rst
index 6b024f07f6..b52a1f690c 100644
--- a/doc/board/sifive/unmatched.rst
+++ b/doc/board/sifive/unmatched.rst
@@ -534,3 +534,34 @@  Sample boot log from HiFive Unmatched board
 	OpenEmbedded nodistro.0 unmatched ttySIF0
 
 	unmatched login:
+
+
+Booting from SPI
+----------------
+
+Use Building steps from "Booting from uSD using U-Boot SPL" section.
+
+Partition the SPI in Linux via mtdblock.  The partition types here are
+"HiFive Unleashed FSBL", "HiFive Unleashed BBL", and "U-Boot environment"
+for partitions one through three respectively.
+
+.. code-block:: none
+
+	sgdisk --clear -a 1 \
+	    --new=1:40:2087     --change-name=1:spl   --typecode=1:5B193300-FC78-40CD-8002-E86C45580B47 \
+	    --new=2:2088:10279  --change-name=2:uboot --typecode=2:2E54B353-1271-4842-806F-E436D6AF6985 \
+	    --new=3:10280:10535 --change-name=3:env   --typecode=3:3DE21764-95BD-54BD-A5C3-4ABE786F38A8 \
+	    /dev/mtdblock0
+
+Write U-boot SPL and U-boot to their partitions.
+
+.. code-block:: none
+
+	dd if=u-boot-spl.bin of=/dev/mtdblock0 bs=4096 seek=5 conv=sync
+	dd if=u-boot.itb  of=/dev/mtdblock0 bs=4096 seek=261 conv=sync
+
+Power off the board.
+
+Change DIP switches MSEL[3:0] to 0110.
+
+Power up the board.