diff mbox series

[v4,2/5] board: sl28: generate FIT update image

Message ID 20211022221924.1226010-3-marcel@ziswiler.com
State Accepted
Commit d8ffd938f1903cbf5cf03d75e2306e0da8ce4ffb
Delegated to: Stefano Babic
Headers show
Series board: sl28: target refresh | expand

Commit Message

Marcel Ziswiler Oct. 22, 2021, 10:19 p.m. UTC 
From: Michael Walle <michael@walle.cc>

Generate a FIT update image during build. The image will be called
"u-boot.update" and can be used to build an EFI UpdateCapsule or during
DFU mode. Although, the latter isn't supported because there is no USB
OTG driver yet.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

---

Changes in v4:
- Re-based on top of imx/master.

Changes in v3:
- none

Changes in v2:
- new patch

 .../dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi  | 35 +++++++++++++++++--
 1 file changed, 33 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi b/arch/arm/dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi
index b3861ed98cf..a501cece698 100644
--- a/arch/arm/dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi
@@ -15,6 +15,12 @@ 
 	};
 
 	binman: binman {
+		multiple-images;
+	};
+};
+
+&binman {
+	u_boot_rom: u-boot-rom {
 		filename = "u-boot.rom";
 		pad-byte = <0xff>;
 
@@ -133,6 +139,31 @@ 
 	};
 };
 
+&binman {
+	u-boot-update {
+		filename = "u-boot.update";
+
+		fit {
+			description = "FIT update image";
+
+			images {
+				u-boot-bin {
+					description = "U-Boot";
+					type = "firmware";
+					os = "u-boot";
+					arch = "arm";
+					compression = "none";
+					load = <0>; /* unused */
+
+					blob {
+						filename = "u-boot.rom";
+					};
+				};
+			};
+		};
+	};
+};
+
 #ifdef CONFIG_SL28_ENABLE_SER0_CONSOLE
 / {
 	chosen {
@@ -142,7 +173,7 @@ 
 #endif
 
 #ifdef CONFIG_SL28_SPL_LOADS_ATF_BL31
-&binman {
+&u_boot_rom {
 	fit {
 		images {
 			bl31 {
@@ -191,7 +222,7 @@ 
 #endif
 
 #ifdef CONFIG_SL28_SPL_LOADS_OPTEE_BL32
-&binman {
+&u_boot_rom {
 	fit {
 		images {
 			bl32 {