@@ -433,6 +433,7 @@ dtb-$(CONFIG_FSL_LSCH2) += fsl-ls1043a-qds-duart.dtb \
fsl-ls1012a-frwy.dtb
dtb-$(CONFIG_TARGET_SL28) += fsl-ls1028a-kontron-sl28.dtb \
fsl-ls1028a-kontron-sl28-var1.dtb \
+ fsl-ls1028a-kontron-sl28-var2.dtb \
fsl-ls1028a-kontron-sl28-var3.dtb \
fsl-ls1028a-kontron-sl28-var4.dtb \
@@ -61,6 +61,17 @@
};
fdt-3 {
+ description = "fsl-ls1028a-kontron-sl28-var2";
+ type = "flat_dt";
+ arch = "arm";
+ compression = "none";
+
+ blob {
+ filename = "arch/arm/dts/fsl-ls1028a-kontron-sl28-var2.dtb";
+ };
+ };
+
+ fdt-4 {
description = "fsl-ls1028a-kontron-sl28-var3";
type = "flat_dt";
arch = "arm";
@@ -71,7 +82,7 @@
};
};
- fdt-4 {
+ fdt-5 {
description = "fsl-ls1028a-kontron-sl28-var4";
type = "flat_dt";
arch = "arm";
@@ -99,17 +110,24 @@
};
conf-3 {
- description = "fsl-ls1028a-kontron-sl28-var3";
+ description = "fsl-ls1028a-kontron-sl28-var2";
firmware = "uboot";
fdt = "fdt-3";
};
conf-4 {
- description = "fsl-ls1028a-kontron-sl28-var4";
+ description = "fsl-ls1028a-kontron-sl28-var3";
firmware = "uboot";
loadables = "uboot";
fdt = "fdt-4";
};
+
+ conf-5 {
+ description = "fsl-ls1028a-kontron-sl28-var4";
+ firmware = "uboot";
+ loadables = "uboot";
+ fdt = "fdt-5";
+ };
};
};
};
@@ -154,6 +172,11 @@
firmware = "bl31";
loadables = "uboot";
};
+
+ conf-5 {
+ firmware = "bl31";
+ loadables = "uboot";
+ };
};
};
};
@@ -194,6 +217,10 @@
conf-4 {
loadables = "uboot", "bl32";
};
+
+ conf-5 {
+ loadables = "uboot", "bl32";
+ };
};
};
};
new file mode 100644
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0+
+#include "fsl-ls1028a-kontron-sl28-u-boot.dtsi"
new file mode 100644
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for the Kontron SMARC-sAL28 board.
+ *
+ * This is for the network variant 2 which has no ethernet support in the
+ * bootloader.
+ *
+ * Copyright (C) 2020 Michael Walle <michael@walle.cc>
+ *
+ */
+
+/dts-v1/;
+#include "fsl-ls1028a-kontron-sl28.dts"
+
+/ {
+ model = "Kontron SMARC-sAL28 (TSN-on-module)";
+ compatible = "kontron,sl28-var2", "kontron,sl28", "fsl,ls1028a";
+};
+
+&enetc0 {
+ status = "disabled";
+ /delete-property/ phy-handle;
+};
+
+/delete-node/ &phy0;
@@ -19,6 +19,8 @@ int board_fit_config_name_match(const char *name)
switch (variant) {
case 1:
return strcmp(name, "fsl-ls1028a-kontron-sl28-var1");
+ case 2:
+ return strcmp(name, "fsl-ls1028a-kontron-sl28-var2");
case 3:
return strcmp(name, "fsl-ls1028a-kontron-sl28-var3");
case 4:
Although this variant has two external network ports, they are not (yet) supported by the bootloader because they are connected via an internal network switch. Otherwise its the same as the other variants. Signed-off-by: Michael Walle <michael@walle.cc> --- arch/arm/dts/Makefile | 1 + .../dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi | 33 +++++++++++++++++-- .../fsl-ls1028a-kontron-sl28-var2-u-boot.dtsi | 2 ++ .../arm/dts/fsl-ls1028a-kontron-sl28-var2.dts | 25 ++++++++++++++ board/kontron/sl28/spl.c | 2 ++ 5 files changed, 60 insertions(+), 3 deletions(-) create mode 100644 arch/arm/dts/fsl-ls1028a-kontron-sl28-var2-u-boot.dtsi create mode 100644 arch/arm/dts/fsl-ls1028a-kontron-sl28-var2.dts