Message ID | 20201105090955.29641-10-ovidiu.panait@windriver.com |
---|---|
State | Superseded |
Delegated to: | Tom Rini |
Headers | show |
Series | Minor board_f/board_r cleanups | expand |
On Thu, 5 Nov 2020 at 03:10, Ovidiu Panait <ovidiu.panait@windriver.com> wrote: > > Add a return value to pci_init and use it directly in the post-relocation > init sequence, rather than using a wrapper stub. > > Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> > --- > common/board_r.c | 18 ++++-------------- > drivers/pci/pci-uclass.c | 4 +++- > drivers/pci/pci.c | 6 ++++-- > include/init.h | 2 +- > 4 files changed, 12 insertions(+), 18 deletions(-) Reviewed-by: Simon Glass <sjg@chromium.org> nit below > > diff --git a/common/board_r.c b/common/board_r.c > index d86ff0cb5e..414b6272c5 100644 > --- a/common/board_r.c > +++ b/common/board_r.c > @@ -214,16 +214,6 @@ static int initr_unlock_ram_in_cache(void) > } > #endif > > -#ifdef CONFIG_PCI > -static int initr_pci(void) > -{ > - if (IS_ENABLED(CONFIG_PCI_INIT_R)) > - pci_init(); > - > - return 0; > -} > -#endif > - > static int initr_barrier(void) > { > #ifdef CONFIG_PPC > @@ -732,12 +722,12 @@ static init_fnc_t init_sequence_r[] = { > post_output_backlog, > #endif > INIT_FUNC_WATCHDOG_RESET > -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_EARLY_PCI_INIT) > +#if defined(CONFIG_PCI_INIT_R) && defined(CONFIG_SYS_EARLY_PCI_INIT) > /* > * Do early PCI configuration _before_ the flash gets initialised, > * because PCU resources are crucial for flash access on some boards. > */ > - initr_pci, > + pci_init, > #endif > #ifdef CONFIG_ARCH_EARLY_INIT_R > arch_early_init_r, > @@ -776,11 +766,11 @@ static init_fnc_t init_sequence_r[] = { > mac_read_from_eeprom, > #endif > INIT_FUNC_WATCHDOG_RESET > -#if defined(CONFIG_PCI) && !defined(CONFIG_SYS_EARLY_PCI_INIT) > +#if defined(CONFIG_PCI_INIT_R) && !defined(CONFIG_SYS_EARLY_PCI_INIT) > /* > * Do pci configuration > */ > - initr_pci, > + pci_init, > #endif > stdio_add_devices, > initr_jumptable, > diff --git a/drivers/pci/pci-uclass.c b/drivers/pci/pci-uclass.c > index eb07d25301..7e9b5cf0fa 100644 > --- a/drivers/pci/pci-uclass.c > +++ b/drivers/pci/pci-uclass.c > @@ -1834,7 +1834,7 @@ U_BOOT_DRIVER(pci_generic_drv) = { > .of_match = pci_generic_ids, > }; > > -void pci_init(void) > +int pci_init(void) > { > struct udevice *bus; > > @@ -1847,4 +1847,6 @@ void pci_init(void) > uclass_next_device_check(&bus)) { > ; > } > + > + return 0; > } > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c > index 664e8379eb..a7453e5755 100644 > --- a/drivers/pci/pci.c > +++ b/drivers/pci/pci.c > @@ -454,16 +454,18 @@ int pci_hose_scan(struct pci_controller *hose) > return pci_hose_scan_bus(hose, hose->current_busno); > } > > -void pci_init(void) > +int pci_init(void) > { > hose_head = NULL; > > /* allow env to disable pci init/enum */ > if (env_get("pcidisable") != NULL) > - return; > + return 0; > > /* now call board specific pci_init()... */ > pci_init_board(); > + > + return 0; > } > > /* Returns the address of the requested capability structure within the > diff --git a/include/init.h b/include/init.h > index a887c2b4fc..5519562163 100644 > --- a/include/init.h > +++ b/include/init.h > @@ -234,7 +234,7 @@ int mac_read_from_eeprom(void); > int set_cpu_clk_info(void); > int update_flash_size(int flash_size); > int arch_early_init_r(void); > -void pci_init(void); > +int pci_init(void); Please add a comment about what it does and the return value > int pci_ep_init(void); > int misc_init_r(void); > #if defined(CONFIG_VID) > -- > 2.17.1 >
diff --git a/common/board_r.c b/common/board_r.c index d86ff0cb5e..414b6272c5 100644 --- a/common/board_r.c +++ b/common/board_r.c @@ -214,16 +214,6 @@ static int initr_unlock_ram_in_cache(void) } #endif -#ifdef CONFIG_PCI -static int initr_pci(void) -{ - if (IS_ENABLED(CONFIG_PCI_INIT_R)) - pci_init(); - - return 0; -} -#endif - static int initr_barrier(void) { #ifdef CONFIG_PPC @@ -732,12 +722,12 @@ static init_fnc_t init_sequence_r[] = { post_output_backlog, #endif INIT_FUNC_WATCHDOG_RESET -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_EARLY_PCI_INIT) +#if defined(CONFIG_PCI_INIT_R) && defined(CONFIG_SYS_EARLY_PCI_INIT) /* * Do early PCI configuration _before_ the flash gets initialised, * because PCU resources are crucial for flash access on some boards. */ - initr_pci, + pci_init, #endif #ifdef CONFIG_ARCH_EARLY_INIT_R arch_early_init_r, @@ -776,11 +766,11 @@ static init_fnc_t init_sequence_r[] = { mac_read_from_eeprom, #endif INIT_FUNC_WATCHDOG_RESET -#if defined(CONFIG_PCI) && !defined(CONFIG_SYS_EARLY_PCI_INIT) +#if defined(CONFIG_PCI_INIT_R) && !defined(CONFIG_SYS_EARLY_PCI_INIT) /* * Do pci configuration */ - initr_pci, + pci_init, #endif stdio_add_devices, initr_jumptable, diff --git a/drivers/pci/pci-uclass.c b/drivers/pci/pci-uclass.c index eb07d25301..7e9b5cf0fa 100644 --- a/drivers/pci/pci-uclass.c +++ b/drivers/pci/pci-uclass.c @@ -1834,7 +1834,7 @@ U_BOOT_DRIVER(pci_generic_drv) = { .of_match = pci_generic_ids, }; -void pci_init(void) +int pci_init(void) { struct udevice *bus; @@ -1847,4 +1847,6 @@ void pci_init(void) uclass_next_device_check(&bus)) { ; } + + return 0; } diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 664e8379eb..a7453e5755 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -454,16 +454,18 @@ int pci_hose_scan(struct pci_controller *hose) return pci_hose_scan_bus(hose, hose->current_busno); } -void pci_init(void) +int pci_init(void) { hose_head = NULL; /* allow env to disable pci init/enum */ if (env_get("pcidisable") != NULL) - return; + return 0; /* now call board specific pci_init()... */ pci_init_board(); + + return 0; } /* Returns the address of the requested capability structure within the diff --git a/include/init.h b/include/init.h index a887c2b4fc..5519562163 100644 --- a/include/init.h +++ b/include/init.h @@ -234,7 +234,7 @@ int mac_read_from_eeprom(void); int set_cpu_clk_info(void); int update_flash_size(int flash_size); int arch_early_init_r(void); -void pci_init(void); +int pci_init(void); int pci_ep_init(void); int misc_init_r(void); #if defined(CONFIG_VID)
Add a return value to pci_init and use it directly in the post-relocation init sequence, rather than using a wrapper stub. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> --- common/board_r.c | 18 ++++-------------- drivers/pci/pci-uclass.c | 4 +++- drivers/pci/pci.c | 6 ++++-- include/init.h | 2 +- 4 files changed, 12 insertions(+), 18 deletions(-)