diff mbox series

[1/2] mmc: sdhci: Use debug for not supported SDMA info message

Message ID 20200512100207.13183-1-matthias.bgg@kernel.org
State Accepted
Commit 7acdc9aa096d4e2a4c32d887fdbf4cee381a1e92
Delegated to: Matthias Brugger
Headers show
Series [1/2] mmc: sdhci: Use debug for not supported SDMA info message | expand

Commit Message

Matthias Brugger May 12, 2020, 10:02 a.m. UTC
From: Matthias Brugger <mbrugger@suse.com>

If CONFIG_MMC_SDHCI_SDMA is enabled but the HW could not support it,
we no longer error out. Instead we do not enable it in the host.
Change the output from printf to debug as this isn't an error but only
additional information now.

Signed-off-by: Matthias Brugger <mbrugger@suse.com>
---

 drivers/mmc/sdhci.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Peng Fan May 12, 2020, 12:39 p.m. UTC | #1
> Subject: [PATCH 1/2] mmc: sdhci: Use debug for not supported SDMA info
> message
> 
> From: Matthias Brugger <mbrugger@suse.com>
> 
> If CONFIG_MMC_SDHCI_SDMA is enabled but the HW could not support it,
> we no longer error out. Instead we do not enable it in the host.
> Change the output from printf to debug as this isn't an error but only
> additional information now.
> 
> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
> ---
> 
>  drivers/mmc/sdhci.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c index
> 6e8f6e3d17..8bb4393ce1 100644
> --- a/drivers/mmc/sdhci.c
> +++ b/drivers/mmc/sdhci.c
> @@ -744,8 +744,8 @@ int sdhci_setup_cfg(struct mmc_config *cfg, struct
> sdhci_host *host,
>  	if ((caps & SDHCI_CAN_DO_SDMA)) {
>  		host->flags |= USE_SDMA;
>  	} else {
> -		printf("%s: Your controller doesn't support SDMA!!\n",
> -		       __func__);
> +		debug("%s: Your controller doesn't support SDMA!!\n",
> +		      __func__);
>  	}
>  #endif
>  #if CONFIG_IS_ENABLED(MMC_SDHCI_ADMA)
> --

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Matthias Brugger May 13, 2020, 11:57 a.m. UTC | #2
On 12/05/2020 12:02, matthias.bgg@kernel.org wrote:
> From: Matthias Brugger <mbrugger@suse.com>
> 
> If CONFIG_MMC_SDHCI_SDMA is enabled but the HW could not support it,
> we no longer error out. Instead we do not enable it in the host.
> Change the output from printf to debug as this isn't an error but only
> additional information now.
> 
> Signed-off-by: Matthias Brugger <mbrugger@suse.com>

Queued for rpi-next

> ---
> 
>  drivers/mmc/sdhci.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
> index 6e8f6e3d17..8bb4393ce1 100644
> --- a/drivers/mmc/sdhci.c
> +++ b/drivers/mmc/sdhci.c
> @@ -744,8 +744,8 @@ int sdhci_setup_cfg(struct mmc_config *cfg, struct sdhci_host *host,
>  	if ((caps & SDHCI_CAN_DO_SDMA)) {
>  		host->flags |= USE_SDMA;
>  	} else {
> -		printf("%s: Your controller doesn't support SDMA!!\n",
> -		       __func__);
> +		debug("%s: Your controller doesn't support SDMA!!\n",
> +		      __func__);
>  	}
>  #endif
>  #if CONFIG_IS_ENABLED(MMC_SDHCI_ADMA)
>
diff mbox series

Patch

diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index 6e8f6e3d17..8bb4393ce1 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -744,8 +744,8 @@  int sdhci_setup_cfg(struct mmc_config *cfg, struct sdhci_host *host,
 	if ((caps & SDHCI_CAN_DO_SDMA)) {
 		host->flags |= USE_SDMA;
 	} else {
-		printf("%s: Your controller doesn't support SDMA!!\n",
-		       __func__);
+		debug("%s: Your controller doesn't support SDMA!!\n",
+		      __func__);
 	}
 #endif
 #if CONFIG_IS_ENABLED(MMC_SDHCI_ADMA)