diff mbox series

[U-Boot,V2,10/10] ARM: renesas: Enable R8A66597 USB host on GR Peach

Message ID 20190822162214.19011-10-marek.vasut+renesas@gmail.com
State Accepted
Commit be1e9dc0800a9d44514a0c640ded0bd70400ddc6
Delegated to: Marek Vasut
Headers show
Series [U-Boot,V2,01/10] usb: r8a66597: Remove CONFIG_SUPERH_ON_CHIP_R8A66597 | expand

Commit Message

Marek Vasut Aug. 22, 2019, 4:22 p.m. UTC 
Enable USB host support on GR Peach board.

To use USB host on GR Peach, it might be necessary to solder JP3 header
onto the board first and then short it. Shorting JP3 is mandatory to let
the U5 regulator to supply VBUS to the CN3 USB port.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Chris Brandt <chris.brandt@renesas.com>
---
V2: No change
---
 arch/arm/dts/r7s72100-gr-peach-u-boot.dts | 14 ++++++++++++++
 configs/grpeach_defconfig                 |  9 ++++++++-
 2 files changed, 22 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm/dts/r7s72100-gr-peach-u-boot.dts b/arch/arm/dts/r7s72100-gr-peach-u-boot.dts
index 28247d19d7..30e35e47d6 100644
--- a/arch/arm/dts/r7s72100-gr-peach-u-boot.dts
+++ b/arch/arm/dts/r7s72100-gr-peach-u-boot.dts
@@ -37,6 +37,15 @@ 
 		};
 	};
 
+	reg_usbhs0_vbus: regulator-usbhs0-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbhs0_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&port4 1 GPIO_ACTIVE_LOW>;
+	};
+
+
 	rpc: rpc@0xee200000 {
 		compatible = "renesas,rpc-r7s72100", "renesas,rpc";
 		reg = <0x3fefa000 0x100>, <0x18000000 0x08000000>;
@@ -76,3 +85,8 @@ 
 &scif2_pins {
 	u-boot,dm-pre-reloc;
 };
+
+&usbhs0 {
+	vbus-supply = <&reg_usbhs0_vbus>;
+	status = "okay";
+};
diff --git a/configs/grpeach_defconfig b/configs/grpeach_defconfig
index 32254b3b0e..adabfbc085 100644
--- a/configs/grpeach_defconfig
+++ b/configs/grpeach_defconfig
@@ -10,6 +10,7 @@  CONFIG_HUSH_PARSER=y
 # CONFIG_CMD_ELF is not set
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
@@ -30,7 +31,7 @@  CONFIG_ENV_SPI_MAX_HZ=50000000
 CONFIG_USE_ENV_SPI_MODE=y
 CONFIG_ENV_SPI_MODE=0x0
 CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_HAVE_BLOCK_DEVICE=y
+CONFIG_BLK=y
 CONFIG_DM_GPIO=y
 CONFIG_RZA1_GPIO=y
 CONFIG_LED=y
@@ -43,11 +44,17 @@  CONFIG_SPI_FLASH_MACRONIX=y
 CONFIG_DM_ETH=y
 CONFIG_SH_ETHER=y
 CONFIG_PINCTRL=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_SCIF_CONSOLE=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_RENESAS_RPC_SPI=y
 CONFIG_TIMER=y
 CONFIG_RENESAS_OSTM_TIMER=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_R8A66597_HCD=y
+CONFIG_USB_STORAGE=y
 CONFIG_OF_LIBFDT_OVERLAY=y
 # CONFIG_EFI_LOADER is not set