@@ -84,6 +84,7 @@
#dma-requests = <32>;
clocks = <&l4_main_clk>;
clock-names = "apb_pclk";
+ resets = <&rst DMA_RESET>;
};
};
@@ -100,6 +101,7 @@
reg = <0xffc00000 0x1000>;
interrupts = <0 131 4>, <0 132 4>, <0 133 4>, <0 134 4>;
clocks = <&can0_clk>;
+ resets = <&rst CAN0_RESET>;
status = "disabled";
};
@@ -108,6 +110,7 @@
reg = <0xffc01000 0x1000>;
interrupts = <0 135 4>, <0 136 4>, <0 137 4>, <0 138 4>;
clocks = <&can1_clk>;
+ resets = <&rst CAN1_RESET>;
status = "disabled";
};
@@ -585,6 +588,7 @@
compatible = "snps,dw-apb-gpio";
reg = <0xff708000 0x1000>;
clocks = <&l4_mp_clk>;
+ resets = <&rst GPIO0_RESET>;
status = "disabled";
porta: gpio-controller@0 {
@@ -605,6 +609,7 @@
compatible = "snps,dw-apb-gpio";
reg = <0xff709000 0x1000>;
clocks = <&l4_mp_clk>;
+ resets = <&rst GPIO1_RESET>;
status = "disabled";
portb: gpio-controller@0 {
@@ -625,6 +630,7 @@
compatible = "snps,dw-apb-gpio";
reg = <0xff70a000 0x1000>;
clocks = <&l4_mp_clk>;
+ resets = <&rst GPIO2_RESET>;
status = "disabled";
portc: gpio-controller@0 {
@@ -735,6 +741,7 @@
#size-cells = <0>;
clocks = <&l4_mp_clk>, <&sdmmc_clk_divided>;
clock-names = "biu", "ciu";
+ resets = <&rst SDMMC_RESET>;
status = "disabled";
};
@@ -746,9 +753,9 @@
<0xffb80000 0x10000>;
reg-names = "nand_data", "denali_reg";
interrupts = <0x0 0x90 0x4>;
- dma-mask = <0xffffffff>;
clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>;
clock-names = "nand", "nand_x", "ecc";
+ resets = <&rst NAND_RESET>;
status = "disabled";
};
@@ -759,7 +766,7 @@
qspi: spi@ff705000 {
compatible = "cdns,qspi-nor";
- #address-cells = <1>;
+ #address-cells = <1>;
#size-cells = <0>;
reg = <0xff705000 0x1000>,
<0xffa00000 0x1000>;
@@ -768,6 +775,7 @@
cdns,fifo-width = <4>;
cdns,trigger-address = <0x00000000>;
clocks = <&qspi_clk>;
+ resets = <&rst QSPI_RESET>;
status = "disabled";
};
@@ -786,6 +794,7 @@
sdr: sdr@ffc25000 {
compatible = "altr,sdr-ctl", "syscon";
reg = <0xffc25000 0x1000>;
+ resets = <&rst SDR_RESET>;
};
sdramedac {
@@ -802,6 +811,7 @@
interrupts = <0 154 4>;
num-cs = <4>;
clocks = <&spi_m_clk>;
+ resets = <&rst SPIM0_RESET>;
status = "disabled";
};
@@ -813,6 +823,7 @@
interrupts = <0 155 4>;
num-cs = <4>;
clocks = <&spi_m_clk>;
+ resets = <&rst SPIM1_RESET>;
status = "disabled";
};
@@ -879,6 +890,7 @@
dmas = <&pdma 28>,
<&pdma 29>;
dma-names = "tx", "rx";
+ resets = <&rst UART0_RESET>;
};
uart1: serial1@ffc03000 {
@@ -891,6 +903,7 @@
dmas = <&pdma 30>,
<&pdma 31>;
dma-names = "tx", "rx";
+ resets = <&rst UART1_RESET>;
};
usbphy0: usbphy {
@@ -930,6 +943,7 @@
reg = <0xffd02000 0x1000>;
interrupts = <0 171 4>;
clocks = <&osc1>;
+ resets = <&rst L4WD0_RESET>;
status = "disabled";
};
@@ -938,6 +952,7 @@
reg = <0xffd03000 0x1000>;
interrupts = <0 172 4>;
clocks = <&osc1>;
+ resets = <&rst L4WD1_RESET>;
status = "disabled";
};
};
@@ -76,7 +76,6 @@
&qspi {
status = "okay";
- u-boot,dm-pre-reloc;
flash: flash@0 {
#address-cells = <1>;
@@ -91,6 +90,5 @@
cdns,tchsh-ns = <4>;
cdns,tslch-ns = <4>;
status = "okay";
- u-boot,dm-pre-reloc;
};
};
This is again a sync to linux-next + pending patches in Dinh's tree at commit 1c909b2dfe6a ("ARM: dts: socfpga: update more missing reset properties")' It adds missing peripheral reset properties to socfpga.dtsi and removes U-Boot specific leftovers from socfpga_cyclone5_socrates.dts. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> --- Changes in v3: None Changes in v2: - cleanly merged Linux dts (moved change of SDR controller base address to a separate patch) arch/arm/dts/socfpga.dtsi | 19 +++++++++++++++++-- arch/arm/dts/socfpga_cyclone5_socrates.dts | 2 -- 2 files changed, 17 insertions(+), 4 deletions(-)