| Message ID | 1581402553-25119-2-git-send-email-kuldeep.singh@nxp.com |
|---|---|
| State | Superseded |
| Delegated to: | Jagannadha Sutradharudu Teki |
| Headers | show |
| Series | Enable octal read support for mt35xu* flashes | expand |
On 11/02/20 11:59 am, Kuldeep Singh wrote: > Commit "658df8bd9464"(mtd: spi-nor-core: Add octal mode support) enables > octal mode(1-1-8) support in spi-nor framework. > > mt35xu512aba and mt35xu02g supports SINGLE and OCTAL I/O. > Hence, enable SPI_NOR_OCTAL_READ flag for these flashes. > > Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com> > --- > v2: Reword commit message > > drivers/mtd/spi/spi-nor-ids.c | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/drivers/mtd/spi/spi-nor-ids.c b/drivers/mtd/spi/spi-nor-ids.c > index 973b6f8..334c074 100644 > --- a/drivers/mtd/spi/spi-nor-ids.c > +++ b/drivers/mtd/spi/spi-nor-ids.c > @@ -182,8 +182,8 @@ const struct flash_info spi_nor_ids[] = { > { INFO("n25q00", 0x20ba21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) }, > { INFO("n25q00a", 0x20bb21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) }, > { INFO("mt25qu02g", 0x20bb22, 0, 64 * 1024, 4096, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) }, > - { INFO("mt35xu512aba", 0x2c5b1a, 0, 128 * 1024, 512, USE_FSR | SPI_NOR_4B_OPCODES) }, > - { INFO("mt35xu02g", 0x2c5b1c, 0, 128 * 1024, 2048, USE_FSR | SPI_NOR_4B_OPCODES) }, > + { INFO("mt35xu512aba", 0x2c5b1a, 0, 128 * 1024, 512, USE_FSR | SPI_NOR_OCTAL_READ | SPI_NOR_4B_OPCODES) }, > + { INFO("mt35xu02g", 0x2c5b1c, 0, 128 * 1024, 2048, USE_FSR | SPI_NOR_OCTAL_READ | SPI_NOR_4B_OPCODES) }, > #endif > #ifdef CONFIG_SPI_FLASH_SPANSION /* SPANSION */ > /* Spansion/Cypress -- single (large) sector size only, at least >
diff --git a/drivers/mtd/spi/spi-nor-ids.c b/drivers/mtd/spi/spi-nor-ids.c index 973b6f8..334c074 100644 --- a/drivers/mtd/spi/spi-nor-ids.c +++ b/drivers/mtd/spi/spi-nor-ids.c @@ -182,8 +182,8 @@ const struct flash_info spi_nor_ids[] = { { INFO("n25q00", 0x20ba21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) }, { INFO("n25q00a", 0x20bb21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) }, { INFO("mt25qu02g", 0x20bb22, 0, 64 * 1024, 4096, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) }, - { INFO("mt35xu512aba", 0x2c5b1a, 0, 128 * 1024, 512, USE_FSR | SPI_NOR_4B_OPCODES) }, - { INFO("mt35xu02g", 0x2c5b1c, 0, 128 * 1024, 2048, USE_FSR | SPI_NOR_4B_OPCODES) }, + { INFO("mt35xu512aba", 0x2c5b1a, 0, 128 * 1024, 512, USE_FSR | SPI_NOR_OCTAL_READ | SPI_NOR_4B_OPCODES) }, + { INFO("mt35xu02g", 0x2c5b1c, 0, 128 * 1024, 2048, USE_FSR | SPI_NOR_OCTAL_READ | SPI_NOR_4B_OPCODES) }, #endif #ifdef CONFIG_SPI_FLASH_SPANSION /* SPANSION */ /* Spansion/Cypress -- single (large) sector size only, at least
Commit "658df8bd9464"(mtd: spi-nor-core: Add octal mode support) enables octal mode(1-1-8) support in spi-nor framework. mt35xu512aba and mt35xu02g supports SINGLE and OCTAL I/O. Hence, enable SPI_NOR_OCTAL_READ flag for these flashes. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> --- v2: Reword commit message drivers/mtd/spi/spi-nor-ids.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)