[U-Boot] sunxi: Set the /chosen/stdout-path fdt property for sunxi boards

While discussing with some people how to get the Linux kernel to do the
right thing wrt sending output to both the serial console and the
hdmi out / lcd screen when booting on ARM devices, Grant Likely pointed out
that there already is a solution for this.

All we need to do is set the /chosen/stdout-path fdt property, and if no
console= arguments were specified on the kernel commandline the kernel
will honor this and add this device as a console (next to the primary
video output on hdmi).

And u-boot already has support for setting this, all we need to do is
define OF_STDOUT_PATH and then everything will just work ootb, without
people needing to meddle with adding console= arguments in extlinux.conf .

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 include/configs/sunxi-common.h | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

On Fri, 2015-02-20 at 16:59 +0100, Hans de Goede wrote:
> While discussing with some people how to get the Linux kernel to do the
> right thing wrt sending output to both the serial console and the
> hdmi out / lcd screen when booting on ARM devices, Grant Likely pointed out
> that there already is a solution for this.
> 
> All we need to do is set the /chosen/stdout-path fdt property, and if no
> console= arguments were specified on the kernel commandline the kernel
> will honor this and add this device as a console (next to the primary
> video output on hdmi).
> 
> And u-boot already has support for setting this, all we need to do is
> define OF_STDOUT_PATH and then everything will just work ootb, without
> people needing to meddle with adding console= arguments in extlinux.conf .
> 
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Acked-by: Ian Campbell <ijc@hellion.org.uk>

On Fri, Feb 20, 2015 at 04:59:09PM +0100, Hans de Goede wrote:

> While discussing with some people how to get the Linux kernel to do the
> right thing wrt sending output to both the serial console and the
> hdmi out / lcd screen when booting on ARM devices, Grant Likely pointed out
> that there already is a solution for this.
> 
> All we need to do is set the /chosen/stdout-path fdt property, and if no
> console= arguments were specified on the kernel commandline the kernel
> will honor this and add this device as a console (next to the primary
> video output on hdmi).
> 
> And u-boot already has support for setting this, all we need to do is
> define OF_STDOUT_PATH and then everything will just work ootb, without
> people needing to meddle with adding console= arguments in extlinux.conf .
> 
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
>  include/configs/sunxi-common.h | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 
> diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
> index 20e11cf..cd02baf 100644
> --- a/include/configs/sunxi-common.h
> +++ b/include/configs/sunxi-common.h
> @@ -263,6 +263,20 @@ extern int soft_i2c_gpio_scl;
>  #define CONFIG_CONS_INDEX              1       /* UART0 */
>  #endif
>  
> +#if CONFIG_CONS_INDEX == 1
> +#ifdef CONFIG_MACH_SUN9I
> +#define OF_STDOUT_PATH		"/soc/serial@07000000:115200"
> +#else
> +#define OF_STDOUT_PATH		"/soc@01c00000/serial@01c28000:115200"
> +#endif
> +#elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I)
> +#define OF_STDOUT_PATH		"/soc@01c00000/serial@01c28400:115200"
> +#elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I)
> +#define OF_STDOUT_PATH		"/soc@01c00000/serial@01f02800:115200"
> +#else
> +#error Unsupported console port nr. Please fix stdout-path in sunxi-common.h.
> +#endif
> +
>  /* GPIO */
>  #define CONFIG_SUNXI_GPIO
>  #define CONFIG_SPL_GPIO_SUPPORT

Long term we need to make this not be a hard-coded define perhaps?  But
for today,

Reviewed-by: Tom Rini <trini@ti.com>