[U-Boot,v2] edminiv2: drop CONFIG_CFI_LEGACY

Nowadays generic CFI code properly detects the ED Mini V2's
Macronix MX29LV400CB flash chip, therefore we can drop the
CONFIG_FLASH_CFI_LEGACY option and associated settings and code.

Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
---

Changes in v2:
- Fix typo in flash part name (MC29LV400CB... -> MX29LV400CB)
- Add Kconfig settings

 board/LaCie/edminiv2/edminiv2.c | 50 -----------------------------------------
 include/configs/edminiv2.h      |  4 ----
 2 files changed, 54 deletions(-)

On Sun,  1 Feb 2015 12:08:06 +0100, Albert ARIBAUD <albert.u.boot@aribaud.net> wrote:
> Nowadays generic CFI code properly detects the ED Mini V2's
> Macronix MX29LV400CB flash chip, therefore we can drop the
> CONFIG_FLASH_CFI_LEGACY option and associated settings and code.
> 
> Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
> ---
> 
> Changes in v2:
> - Fix typo in flash part name (MC29LV400CB... -> MX29LV400CB)
> - Add Kconfig settings
> 
>  board/LaCie/edminiv2/edminiv2.c | 50 -----------------------------------------
>  include/configs/edminiv2.h      |  4 ----
>  2 files changed, 54 deletions(-)
> 
> diff --git a/board/LaCie/edminiv2/edminiv2.c b/board/LaCie/edminiv2/edminiv2.c
> index 80ec7fa..690038e 100644
> --- a/board/LaCie/edminiv2/edminiv2.c
> +++ b/board/LaCie/edminiv2/edminiv2.c
> @@ -15,56 +15,6 @@
>  
>  DECLARE_GLOBAL_DATA_PTR;
>  
> -/*
> - * The ED Mini V2 is equipped with a Macronix MXLV400CB FLASH
> - * which CFI does not properly detect, hence the LEGACY config.
> - */
> -#if defined(CONFIG_FLASH_CFI_LEGACY)
> -#include <flash.h>
> -ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info)
> -{
> -	int sectsz[] = CONFIG_SYS_FLASH_SECTSZ;
> -	int sect;
> -
> -	if (base != CONFIG_SYS_FLASH_BASE)
> -		return 0;
> -
> -	info->size = 0;
> -	info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
> -	/* set each sector's start address and size based */
> -	for (sect = 0; sect < CONFIG_SYS_MAX_FLASH_SECT; sect++) {
> -		info->start[sect] = base+info->size;
> -		info->size += sectsz[sect];
> -	}
> -	/* This flash must be accessed in 8-bits mode, no buffer. */
> -	info->flash_id = 0x01000000;
> -	info->portwidth = FLASH_CFI_8BIT;
> -	info->chipwidth = FLASH_CFI_BY8;
> -	info->buffer_size = 0;
> -	/* timings are derived from the Macronix datasheet. */
> -	info->erase_blk_tout = 1000;
> -	info->write_tout = 10;
> -	info->buffer_write_tout = 300;
> -	/* Commands and addresses are for AMD mode 8-bit access. */
> -	info->vendor = CFI_CMDSET_AMD_LEGACY;
> -	info->cmd_reset = 0xF0;
> -	info->interface = FLASH_CFI_X8;
> -	info->legacy_unlock = 0;
> -	info->ext_addr = 0;
> -	info->addr_unlock1 = 0x00000aaa;
> -	info->addr_unlock2 = 0x00000555;
> -	/* Manufacturer Macronix, device MX29LV400CB, CFI 1.3. */
> -	info->manufacturer_id = 0x22;
> -	info->device_id = 0xBA;
> -	info->device_id2 = 0;
> -	info->cfi_version = 0x3133;
> -	info->cfi_offset = 0x0000;
> -	info->name = "MX29LV400CB";
> -
> -	return 1;
> -}
> -#endif				/* CONFIG_SYS_FLASH_CFI */
> -
>  int board_init(void)
>  {
>  	/* arch number of board */
> diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h
> index 70a698a..f1e8cb0 100644
> --- a/include/configs/edminiv2.h
> +++ b/include/configs/edminiv2.h
> @@ -89,13 +89,9 @@
>  
>  #define CONFIG_SYS_FLASH_CFI
>  #define CONFIG_FLASH_CFI_DRIVER
> -#define CONFIG_FLASH_CFI_LEGACY
>  #define CONFIG_SYS_MAX_FLASH_BANKS	1  /* max num of flash banks       */
>  #define CONFIG_SYS_MAX_FLASH_SECT	11 /* max num of sects on one chip */
>  #define CONFIG_SYS_FLASH_BASE		0xfff80000
> -#define CONFIG_SYS_FLASH_SECTSZ \
> -	{16384, 8192, 8192, 32768, \
> -	 65536, 65536, 65536, 65536, 65536, 65536, 65536}
>  
>  /* auto boot */
>  #define CONFIG_BOOTDELAY	3	/* default enable autoboot */
> -- 
> 2.1.0
> 

Applied to u-boot-arm/master.

Amicalement,