diff mbox

[U-Boot,v3,2/6] sunxi: Turn MMC_SUNXI_SLOT_EXTRA into a proper Kconfig option

Message ID 1413137238-27251-3-git-send-email-hdegoede@redhat.com
State Accepted
Headers show

Commit Message

Hans de Goede Oct. 12, 2014, 6:07 p.m. UTC 
Note we also drop the SPL check for initializing the 2nd mmc slot, the SPL
check is not necessary with Kconfig, because only options explicitly marked
as also being for the SPL get set during SPL builds.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
---
 board/sunxi/Kconfig | 8 ++++++++
 board/sunxi/board.c | 2 +-
 2 files changed, 9 insertions(+), 1 deletion(-)
diff mbox

Patch

diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index 63188dd..552fce8 100644
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -67,4 +67,12 @@  config MMC3_CD_PIN
 	---help---
 	See MMC0_CD_PIN help text.
 
+config MMC_SUNXI_SLOT_EXTRA
+	int "mmc extra slot number"
+	default -1
+	---help---
+	sunxi builds always enable mmc0, some boards also have a second sdcard
+	slot or emmc on mmc1 - mmc3. Setting this to 1, 2 or 3 will enable
+	support for this.
+
 endif
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index 2179e23..cfe22b6 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -106,7 +106,7 @@  int board_mmc_init(bd_t *bis)
 {
 	mmc_pinmux_setup(CONFIG_MMC_SUNXI_SLOT);
 	sunxi_mmc_init(CONFIG_MMC_SUNXI_SLOT);
-#if !defined (CONFIG_SPL_BUILD) && defined (CONFIG_MMC_SUNXI_SLOT_EXTRA)
+#if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1
 	mmc_pinmux_setup(CONFIG_MMC_SUNXI_SLOT_EXTRA);
 	sunxi_mmc_init(CONFIG_MMC_SUNXI_SLOT_EXTRA);
 #endif