diff mbox

[U-Boot,05/32] nitrogen6x: configure SGTL5000, CSI camera clock outputs

Message ID 1412277413-30271-6-git-send-email-eric.nelson@boundarydevices.com
State Awaiting Upstream
Delegated to: Stefano Babic
Headers show

Commit Message

Eric Nelson Oct. 2, 2014, 7:16 p.m. UTC 
From: Troy Kisky <troy.kisky@boundarydevices.com>

Configure CLKO outputs for SGTL5000, CSI camera.

The sys_mclk output for the SGTL500 in particular prevents
Windows CE from properly driving audio.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
---
 board/boundary/nitrogen6x/nitrogen6x.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

Comments

Stefano Babic Oct. 6, 2014, 4:01 p.m. UTC | #1 
On 02/10/2014 21:16, Eric Nelson wrote:
> From: Troy Kisky <troy.kisky@boundarydevices.com>
> 
> Configure CLKO outputs for SGTL5000, CSI camera.
> 
> The sys_mclk output for the SGTL500 in particular prevents
> Windows CE from properly driving audio.
> 
> Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
> Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
> ---


Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic
diff mbox

Patch

diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c
index 38f0df8..96e2b74 100644
--- a/board/boundary/nitrogen6x/nitrogen6x.c
+++ b/board/boundary/nitrogen6x/nitrogen6x.c
@@ -622,8 +622,14 @@  static void setup_display(void)
 }
 #endif
 
-/* wl1271 pads on nitrogen6x */
 static iomux_v3_cfg_t const init_pads[] = {
+	/* SGTL5000 sys_mclk */
+	NEW_PAD_CTRL(MX6_PAD_GPIO_0__CCM_CLKO1, OUTPUT_40OHM),
+
+	/* J5 - Camera MCLK */
+	NEW_PAD_CTRL(MX6_PAD_GPIO_3__CCM_CLKO2, OUTPUT_40OHM),
+
+	/* wl1271 pads on nitrogen6x */
 	/* WL12XX_WL_IRQ_GP */
 	NEW_PAD_CTRL(MX6_PAD_NANDF_CS1__GPIO6_IO14, WEAK_PULLDOWN),
 	/* WL12XX_WL_ENABLE_GP */