@@ -38,7 +38,6 @@
typedef struct bd_info {
int bi_baudrate; /* serial console baudrate */
- unsigned long bi_ip_addr; /* IP Address */
ulong bi_arch_number; /* unique id for this board */
ulong bi_boot_params; /* where this board expects params */
unsigned long bi_arm_freq; /* arm frequency */
@@ -555,9 +555,6 @@ void board_init_r(gd_t *id, ulong dest_addr)
arm_pci_init();
#endif
- /* IP Address */
- gd->bd->bi_ip_addr = getenv_IPaddr("ipaddr");
-
stdio_init(); /* get the devices list going. */
jumptable_init();
@@ -24,7 +24,6 @@
typedef struct bd_info {
unsigned long bi_baudrate;
- unsigned long bi_ip_addr;
unsigned char bi_phy_id[4];
unsigned long bi_board_number;
void *bi_boot_params;
@@ -316,8 +316,6 @@ void board_init_r(gd_t *new_gd, ulong dest_addr)
/* initialize environment */
env_relocate();
- bd->bi_ip_addr = getenv_IPaddr ("ipaddr");
-
stdio_init();
jumptable_init();
console_init_r();
@@ -30,7 +30,6 @@
typedef struct bd_info {
int bi_baudrate; /* serial console baudrate */
- unsigned long bi_ip_addr; /* IP Address */
unsigned long bi_boot_params; /* where this board expects params */
unsigned long bi_memstart; /* start of DRAM memory */
phys_size_t bi_memsize; /* size of DRAM memory in bytes */
@@ -86,7 +86,6 @@ static void display_global_data(void)
printf(" |-jt(%p): %p\n", gd->jt, *(gd->jt));
printf(" \\-bd: %p\n", gd->bd);
printf(" |-bi_baudrate: %x\n", bd->bi_baudrate);
- printf(" |-bi_ip_addr: %lx\n", bd->bi_ip_addr);
printf(" |-bi_boot_params: %lx\n", bd->bi_boot_params);
printf(" |-bi_memstart: %lx\n", bd->bi_memstart);
printf(" |-bi_memsize: %lx\n", bd->bi_memsize);
@@ -299,8 +298,6 @@ static void board_net_init_r(bd_t *bd)
if ((s = getenv("bootfile")) != NULL)
copy_filename(BootFile, s, sizeof(BootFile));
- bd->bi_ip_addr = getenv_IPaddr("ipaddr");
-
printf("Net: ");
eth_initialize(gd->bd);
#endif
@@ -47,7 +47,6 @@ typedef struct bd_info {
unsigned long bi_mbar_base; /* base of internal registers */
unsigned long bi_bootflags; /* boot / reboot flag (for LynxOS) */
unsigned long bi_boot_params; /* where this board expects params */
- unsigned long bi_ip_addr; /* IP Address */
unsigned short bi_ethspeed; /* Ethernet speed in Mbps */
unsigned long bi_intfreq; /* Internal Freq, in MHz */
unsigned long bi_busfreq; /* Bus Freq, in MHz */
@@ -507,15 +507,6 @@ void board_init_r (gd_t *id, ulong dest_addr)
/* relocate environment function pointers etc. */
env_relocate ();
- /*
- * Fill in missing fields of bd_info.
- * We do this here, where we have "normal" access to the
- * environment; we used to do this still running from ROM,
- * where had to use getenv_f(), which can be pretty slow when
- * the environment is in EEPROM.
- */
- bd->bi_ip_addr = getenv_IPaddr ("ipaddr");
-
WATCHDOG_RESET ();
#if defined(CONFIG_PCI)
@@ -40,7 +40,6 @@ typedef struct bd_info {
unsigned long bi_flashoffset; /* reserved area for startup monitor */
unsigned long bi_sramstart; /* start of SRAM memory */
unsigned long bi_sramsize; /* size of SRAM memory */
- unsigned long bi_ip_addr; /* IP Address */
unsigned long bi_baudrate; /* Console Baudrate */
} bd_t;
@@ -176,9 +176,6 @@ void board_init (void)
load_addr = getenv_ulong("loadaddr", 16, load_addr);
#if defined(CONFIG_CMD_NET)
- /* IP Address */
- bd->bi_ip_addr = getenv_IPaddr("ipaddr");
-
printf("Net: ");
eth_initialize(gd->bd);
@@ -33,7 +33,6 @@
typedef struct bd_info {
int bi_baudrate; /* serial console baudrate */
- unsigned long bi_ip_addr; /* IP Address */
unsigned long bi_arch_number; /* unique id for this board */
unsigned long bi_boot_params; /* where this board expects params */
unsigned long bi_memstart; /* start of DRAM memory */
@@ -316,9 +316,6 @@ void board_init_r(gd_t *id, ulong dest_addr)
/* relocate environment function pointers etc. */
env_relocate();
- /* IP Address */
- bd->bi_ip_addr = getenv_IPaddr("ipaddr");
-
#if defined(CONFIG_PCI)
/*
* Do pci configuration
@@ -40,7 +40,6 @@
typedef struct bd_info {
int bi_baudrate; /* serial console baudrate */
- unsigned long bi_ip_addr; /* IP Address */
unsigned char bi_enetaddr[6]; /* Ethernet adress */
unsigned long bi_arch_number; /* unique id for this board */
unsigned long bi_boot_params; /* where this board expects params */
@@ -369,9 +369,6 @@ void board_init_r(gd_t *id, ulong dest_addr)
nds32_pci_init();
#endif
- /* IP Address */
- gd->bd->bi_ip_addr = getenv_IPaddr("ipaddr");
-
stdio_init(); /* get the devices list going. */
jumptable_init();
@@ -39,7 +39,6 @@ typedef struct bd_info {
unsigned long bi_flashoffset; /* reserved area for startup monitor */
unsigned long bi_sramstart; /* start of SRAM memory */
unsigned long bi_sramsize; /* size of SRAM memory */
- unsigned long bi_ip_addr; /* IP Address */
unsigned long bi_baudrate; /* Console Baudrate */
} bd_t;
@@ -143,8 +143,6 @@ void board_init (void)
WATCHDOG_RESET ();
env_relocate();
- bd->bi_ip_addr = getenv_IPaddr ("ipaddr");
-
WATCHDOG_RESET ();
stdio_init();
jumptable_init();
@@ -33,7 +33,6 @@
typedef struct bd_info {
unsigned long bi_baudrate; /* serial console baudrate */
- unsigned long bi_ip_addr; /* IP Address */
unsigned long bi_arch_number; /* unique id for this board */
unsigned long bi_boot_params; /* where this board expects params */
unsigned long bi_memstart; /* start of DRAM memory */
@@ -63,7 +63,6 @@ typedef struct bd_info {
unsigned long bi_vcofreq; /* VCO Freq, in MHz */
#endif
unsigned long bi_bootflags; /* boot / reboot flag (Unused) */
- unsigned long bi_ip_addr; /* IP Address */
unsigned char bi_enetaddr[6]; /* OLD: see README.enetaddr */
unsigned short bi_ethspeed; /* Ethernet speed in Mbps */
unsigned long bi_intfreq; /* Internal Freq, in MHz */
@@ -877,9 +877,6 @@ void board_init_r(gd_t *id, ulong dest_addr)
#endif
#endif /* CONFIG_CMD_NET */
- /* IP Address */
- bd->bi_ip_addr = getenv_IPaddr("ipaddr");
-
WATCHDOG_RESET();
#if defined(CONFIG_PCI) && !defined(CONFIG_SYS_EARLY_PCI_INIT)
@@ -45,7 +45,6 @@ typedef struct bd_info {
unsigned long bi_sramstart; /* start of SRAM memory */
unsigned long bi_sramsize; /* size of SRAM memory */
unsigned long bi_bootflags; /* boot / reboot flag (for LynxOS) */
- unsigned long bi_ip_addr; /* IP Address */
unsigned short bi_ethspeed; /* Ethernet speed in Mbps */
unsigned long bi_intfreq; /* Internal Freq, in MHz */
unsigned long bi_busfreq; /* Bus Freq, in MHz */
@@ -235,9 +235,6 @@ void board_init_r(gd_t *id, ulong dest_addr)
/* initialize environment */
env_relocate();
- /* IP Address */
- gd->bd->bi_ip_addr = getenv_IPaddr("ipaddr");
-
stdio_init(); /* get the devices list going. */
jumptable_init();
@@ -33,7 +33,6 @@ typedef struct bd_info {
unsigned long bi_flashoffset; /* reserved area for startup monitor */
unsigned long bi_sramstart; /* start of SRAM memory */
unsigned long bi_sramsize; /* size of SRAM memory */
- unsigned long bi_ip_addr; /* IP Address */
unsigned long bi_baudrate; /* Console Baudrate */
unsigned long bi_boot_params; /* where this board expects params */
} bd_t;
@@ -100,14 +100,6 @@ static int sh_mem_env_init(void)
return 0;
}
-#if defined(CONFIG_CMD_NET)
-static int sh_net_init(void)
-{
- gd->bd->bi_ip_addr = getenv_IPaddr("ipaddr");
- return 0;
-}
-#endif
-
#if defined(CONFIG_CMD_MMC)
static int sh_mmc_init(void)
{
@@ -145,9 +137,6 @@ init_fnc_t *init_sequence[] =
#ifdef CONFIG_BOARD_LATE_INIT
board_late_init,
#endif
-#if defined(CONFIG_CMD_NET)
- sh_net_init, /* SH specific eth init */
-#endif
#if defined(CONFIG_CMD_MMC)
sh_mmc_init,
#endif
@@ -51,7 +51,6 @@ typedef struct bd_info {
unsigned long bi_sramstart; /* start of SRAM memory */
unsigned long bi_sramsize; /* size of SRAM memory */
unsigned long bi_bootflags; /* boot / reboot flag (for LynxOS) */
- unsigned long bi_ip_addr; /* IP Address */
unsigned short bi_ethspeed; /* Ethernet speed in Mbps */
unsigned long bi_intfreq; /* Internal Freq, in MHz */
unsigned long bi_busfreq; /* Bus Freq, in MHz */
@@ -333,8 +333,6 @@ void board_init_f(ulong bootflag)
mac_read_from_eeprom();
#endif
- /* IP Address */
- bd->bi_ip_addr = getenv_IPaddr("ipaddr");
#if defined(CONFIG_PCI)
/*
* Do pci configuration
@@ -36,7 +36,6 @@ int set_reloc_flag_r(void);
int mem_malloc_init_r(void);
int init_bd_struct_r(void);
int flash_init_r(void);
-int init_ip_address_r(void);
int status_led_set_r(void);
int set_bootfile_r(void);
int set_load_addr_r(void);
@@ -45,7 +45,6 @@ typedef struct bd_info {
unsigned long bi_sramstart; /* start of SRAM memory */
unsigned long bi_sramsize; /* size of SRAM memory */
unsigned long bi_bootflags; /* boot / reboot flag (for LynxOS) */
- unsigned long bi_ip_addr; /* IP Address */
unsigned short bi_ethspeed; /* Ethernet speed in Mbps */
unsigned long bi_intfreq; /* Internal Freq, in MHz */
unsigned long bi_busfreq; /* Bus Freq, in MHz */
@@ -157,9 +157,6 @@ init_fnc_t *init_sequence_r[] = {
flash_init_r,
#endif
env_relocate_r,
-#ifdef CONFIG_CMD_NET
- init_ip_address_r,
-#endif
#ifdef CONFIG_PCI
pci_init_r,
#endif
@@ -179,14 +179,6 @@ int flash_init_r(void)
}
#endif
-int init_ip_address_r(void)
-{
- /* IP Address */
- bd_data.bi_ip_addr = getenv_IPaddr("ipaddr");
-
- return 0;
-}
-
#ifdef CONFIG_STATUS_LED
int status_led_set_r(void)
{
@@ -730,12 +730,11 @@ int do_get_bpip(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
/*
* Update whole ip-addr
*/
- bd->bi_ip_addr = ipaddr;
sprintf(str, "%ld.%ld.%ld.%ld",
- (bd->bi_ip_addr & 0xff000000) >> 24,
- (bd->bi_ip_addr & 0x00ff0000) >> 16,
- (bd->bi_ip_addr & 0x0000ff00) >> 8,
- (bd->bi_ip_addr & 0x000000ff));
+ (ipaddr & 0xff000000) >> 24,
+ (ipaddr & 0x00ff0000) >> 16,
+ (ipaddr & 0x0000ff00) >> 8,
+ (ipaddr & 0x000000ff));
setenv("ipaddr", str);
printf("Updated ip_addr from bp_eeprom to %s!\n", str);
}
@@ -139,7 +139,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
#ifdef CONFIG_HERMES
print_mhz("ethspeed", bd->bi_ethspeed);
#endif
- printf("IP addr = %pI4\n", &bd->bi_ip_addr);
+ printf("IP addr = %s\n", getenv("ipaddr"));
printf("baudrate = %6ld bps\n", bd->bi_baudrate);
print_num("relocaddr", gd->relocaddr);
return 0;
@@ -164,7 +164,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
#if defined(CONFIG_CMD_NET)
print_eth(0);
- printf("ip_addr = %pI4\n", &bd->bi_ip_addr);
+ printf("ip_addr = %s\n", getenv("ipaddr"));
#endif
printf("baudrate = %ld bps\n", bd->bi_baudrate);
@@ -188,7 +188,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
#endif
#if defined(CONFIG_CMD_NET)
print_eth(0);
- printf("ip_addr = %pI4\n", &bd->bi_ip_addr);
+ printf("ip_addr = %s\n", getenv("ipaddr"));
#endif
printf("baudrate = %ld bps\n", (ulong)bd->bi_baudrate);
return 0;
@@ -221,7 +221,7 @@ int do_bdinfo(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
#if defined(CONFIG_CMD_NET)
print_eth(0);
- printf("ip_addr = %pI4\n", &bd->bi_ip_addr);
+ printf("ip_addr = %s\n", getenv("ipaddr"));
#endif
printf("baudrate = %6ld bps\n", bd->bi_baudrate);
return 0;
@@ -267,7 +267,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
print_eth(3);
#endif
- printf("ip_addr = %pI4\n", &bd->bi_ip_addr);
+ printf("ip_addr = %s\n", getenv("ipaddr"));
#endif
printf("baudrate = %ld bps\n", bd->bi_baudrate);
@@ -295,7 +295,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
print_num("flashoffset", (ulong)bd->bi_flashoffset);
print_eth(0);
- printf("ip_addr = %pI4\n", &bd->bi_ip_addr);
+ printf("ip_addr = %s\n", getenv("ipaddr"));
printf("baudrate = %d bps\n", bd->bi_baudrate);
return 0;
@@ -315,7 +315,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
print_num("flashoffset", (ulong)bd->bi_flashoffset);
print_eth(0);
- printf("ip_addr = %pI4\n", &bd->bi_ip_addr);
+ printf("ip_addr = %s\n", getenv("ipaddr"));
printf("baudrate = %d bps\n", bd->bi_baudrate);
return 0;
@@ -335,7 +335,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
print_num("flashoffset", (ulong)bd->bi_flashoffset);
print_eth(0);
- printf("ip_addr = %pI4\n", &bd->bi_ip_addr);
+ printf("ip_addr = %s\n", getenv("ipaddr"));
printf("baudrate = %lu bps\n", bd->bi_baudrate);
return 0;
@@ -359,7 +359,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
#if defined(CONFIG_CMD_NET)
print_eth(0);
- printf("ip_addr = %pI4\n", &bd->bi_ip_addr);
+ printf("ip_addr = %s\n", getenv("ipaddr"));
#endif
printf("baudrate = %d bps\n", bd->bi_baudrate);
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
@@ -395,7 +395,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
#if defined(CONFIG_CMD_NET)
print_eth(0);
- printf("ip_addr = %pI4\n", &bd->bi_ip_addr);
+ printf("ip_addr = %s\n", getenv("ipaddr"));
#endif
printf("baudrate = %ld bps\n", (ulong)bd->bi_baudrate);
return 0;
@@ -428,7 +428,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
#if defined(CONFIG_CMD_NET)
print_eth(0);
- printf("ip_addr = %pI4\n", &bd->bi_ip_addr);
+ printf("ip_addr = %s\n", getenv("ipaddr"));
print_mhz("ethspeed", bd->bi_ethspeed);
#endif
printf("baudrate = %d bps\n", bd->bi_baudrate);
@@ -453,7 +453,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
#if defined(CONFIG_CMD_NET)
print_eth(0);
- printf("ip_addr = %pI4\n", &bd->bi_ip_addr);
+ printf("ip_addr = %s\n", getenv("ipaddr"));
#endif
print_num("FB base ", gd->fb_base);
return 0;
@@ -477,7 +477,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
#if defined(CONFIG_CMD_NET)
print_eth(0);
- printf("ip_addr = %pI4\n", &bd->bi_ip_addr);
+ printf("ip_addr = %s\n", getenv("ipaddr"));
#endif
printf("baudrate = %d bps\n", bd->bi_baudrate);
@@ -498,7 +498,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
#if defined(CONFIG_CMD_NET)
print_eth(0);
- printf("ip_addr = %pI4\n", &bd->bi_ip_addr);
+ printf("ip_addr = %s\n", getenv("ipaddr"));
#endif
printf("baudrate = %ld bps\n", bd->bi_baudrate);
@@ -342,21 +342,7 @@ int _do_env_set(int flag, int argc, char * const argv[])
* Some variables should be updated when the corresponding
* entry in the environment is changed
*/
- if (strcmp(name, "ipaddr") == 0) {
- char *s = argv[2]; /* always use only one arg */
- char *e;
- unsigned long addr;
- bd->bi_ip_addr = 0;
- for (addr = 0, i = 0; i < 4; ++i) {
- ulong val = s ? simple_strtoul(s, &e, 10) : 0;
- addr <<= 8;
- addr |= val & 0xFF;
- if (s)
- s = *e ? e + 1 : e;
- }
- bd->bi_ip_addr = htonl(addr);
- return 0;
- } else if (strcmp(argv[1], "loadaddr") == 0) {
+ if (strcmp(argv[1], "loadaddr") == 0) {
load_addr = simple_strtoul(argv[2], NULL, 16);
return 0;
}
@@ -342,13 +342,11 @@ void net_auto_load(void)
static void NetInitLoop(enum proto_t protocol)
{
static int env_changed_id;
- bd_t *bd = gd->bd;
int env_id = get_env_id();
/* update only when the environment has changed */
if (env_changed_id != env_id) {
NetOurIP = getenv_IPaddr("ipaddr");
- NetCopyIP(&bd->bi_ip_addr, &NetOurIP);
NetOurGatewayIP = getenv_IPaddr("gatewayip");
NetOurSubnetMask = getenv_IPaddr("netmask");
NetServerIP = getenv_IPaddr("serverip");
This field gets read in one place (by "bdinfo"), and we can replace that with getenv("ipaddr"). After all, the bi_ip_addr field is kept up-to-date implicitly with the value of the ipaddr env var. Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- v2 - rebased onto mainline arch/arm/include/asm/u-boot.h | 1 - arch/arm/lib/board.c | 3 --- arch/avr32/include/asm/u-boot.h | 1 - arch/avr32/lib/board.c | 2 -- arch/blackfin/include/asm/u-boot.h | 1 - arch/blackfin/lib/board.c | 3 --- arch/m68k/include/asm/u-boot.h | 1 - arch/m68k/lib/board.c | 9 --------- arch/microblaze/include/asm/u-boot.h | 1 - arch/microblaze/lib/board.c | 3 --- arch/mips/include/asm/u-boot.h | 1 - arch/mips/lib/board.c | 3 --- arch/nds32/include/asm/u-boot.h | 1 - arch/nds32/lib/board.c | 3 --- arch/nios2/include/asm/u-boot.h | 1 - arch/nios2/lib/board.c | 2 -- arch/openrisc/include/asm/u-boot.h | 1 - arch/powerpc/include/asm/u-boot.h | 1 - arch/powerpc/lib/board.c | 3 --- arch/sandbox/include/asm/u-boot.h | 1 - arch/sandbox/lib/board.c | 3 --- arch/sh/include/asm/u-boot.h | 1 - arch/sh/lib/board.c | 11 ----------- arch/sparc/include/asm/u-boot.h | 1 - arch/sparc/lib/board.c | 2 -- arch/x86/include/asm/init_helpers.h | 1 - arch/x86/include/asm/u-boot.h | 1 - arch/x86/lib/board.c | 3 --- arch/x86/lib/init_helpers.c | 8 -------- board/esd/cpci405/cpci405.c | 9 ++++----- common/cmd_bdinfo.c | 28 ++++++++++++++-------------- common/cmd_nvedit.c | 16 +--------------- net/net.c | 2 -- 33 files changed, 19 insertions(+), 109 deletions(-)