[03/31] board: mediatek: add MT7986 reference boards

Message ID	1019ae0fceee359e6e99149b8de00a1eefd4de1f.1659581119.git.weijie.gao@mediatek.com
State	Superseded
Delegated to:	Tom Rini
Headers	show Return-Path: <u-boot-bounces@lists.denx.de> From: Weijie Gao <weijie.gao@mediatek.com> To: <u-boot@lists.denx.de> CC: GSS_MTK_Uboot_upstream <GSS_MTK_Uboot_upstream@mediatek.com>, Simon Glass <sjg@chromium.org>, Marcel Ziswiler <marcel.ziswiler@toradex.com>, "Andre Przywara" <andre.przywara@arm.com>, Fabio Estevam <festevam@denx.de>, "Samuel Holland" <samuel@sholland.org>, Marek Vasut <marex@denx.de>, "Ying-Chun Liu (PaulLiu)" <paul.liu@linaro.org>, Christian Hewitt <christianshewitt@gmail.com>, Weijie Gao <weijie.gao@mediatek.com> Subject: [PATCH 03/31] board: mediatek: add MT7986 reference boards Date: Thu, 4 Aug 2022 11:35:03 +0800 Message-ID: <1019ae0fceee359e6e99149b8de00a1eefd4de1f.1659581119.git.weijie.gao@mediatek.com> In-Reply-To: <cover.1659581119.git.weijie.gao@mediatek.com> References: <cover.1659581119.git.weijie.gao@mediatek.com> MIME-Version: 1.0 Content-Type: text/plain Precedence: list Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" <u-boot-bounces@lists.denx.de>
Series	Add support for MediaTek MT7981/MT7986 SoCs \| expand [00/31] Add support for MediaTek MT7981/MT7986 SoCs [01/31] arm: mediatek: add support for MediaTek MT7986 SoC [02/31] arm: mediatek: add support for MediaTek MT7981 SoC [03/31] board: mediatek: add MT7986 reference boards [04/31] board: mediatek: add MT7981 reference boards [05/31] mmc: mediatek: add support for MediaTek MT7891/MT7986 SoCs [06/31] net: mediatek: use a struct to cover variations of all SoCs [07/31] net: mediatek: stop using bitfileds for DMA descriptors [08/31] net: mediatek: add support for PDMA v2 [09/31] net: mediatek: add support for MediaTek MT7981/MT7986 [10/31] serial: mtk: add support for using dynamic baud clock souce [11/31] arm: dts: mt7622: force high-speed mode for uart [12/31] pwm: mtk: add support for MediaTek MT7986 SoC [13/31] pwm: mtk: add support for MediaTek MT7981 SoC [14/31] timer: mtk: add support for MediaTek MT7981/MT7986 SoCs [15/31] watchdog: mediatek: add support for MediaTek MT7986 SoC [16/31] spi: add support for MediaTek spi-mem controller [17/31] i2c: add support for MediaTek I2C interface [18/31] arm: dts: mt7622: add i2c support [19/31] dt-bindings: pinctrl: mediatek: add a header for common pinconf parameters [20/31] pinctrl: mediatek: add pinctrl driver for MT7981 SoC [21/31] pinctrl: mediatek: add pinctrl driver for MT7986 SoC [22/31] clk: mediatek: add CLK_BYPASS_XTAL flag to allow bypassing searching clock parent of xtal c… [23/31] clk: mediatek: add support to configure clock driver parent [24/31] clk: mediatek: add infrasys clock mux support [25/31] clk: mediatek: add CLK_XTAL support for clock driver [26/31] clk: mediatek: add clock driver support for MediaTek MT7986 SoC [27/31] clk: mediatek: add clock driver support for MediaTek MT7981 SoC [28/31] tools: mtk_image: split gfh header verification into a new function [29/31] tools: mtk_image: split the code of generating NAND header into a new file [30/31] tools: mtk_image: add support for nand headers used by newer chips [31/31] MAINTAINERS: update maintainer for MediaTek ARM platform

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index ceaa39e4b4..eeb08116c0 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -1226,6 +1226,10 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \ mt7622-bananapi-bpi-r64.dtb \ mt7623n-bananapi-bpi-r2.dtb \ mt7629-rfb.dtb \ + mt7986a-rfb.dtb \ + mt7986b-rfb.dtb \ + mt7986a-sd-rfb.dtb \ + mt7986b-sd-rfb.dtb \ mt8183-pumpkin.dtb \ mt8512-bm1-emmc.dtb \ mt8516-pumpkin.dtb \ diff --git a/arch/arm/dts/mt7986a-rfb.dts b/arch/arm/dts/mt7986a-rfb.dts new file mode 100644 index 0000000000..80def57e1a --- /dev/null +++ b/arch/arm/dts/mt7986a-rfb.dts @@ -0,0 +1,218 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2022 MediaTek Inc. + * Author: Sam Shih <sam.shih@mediatek.com> + */ + +/dts-v1/; +#include "mt7986.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "mt7986-rfb"; + compatible = "mediatek,mt7986", "mediatek,mt7986-rfb"; + chosen { + stdout-path = &uart0; + tick-timer = &timer0; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "disabled"; +}; + +&eth { + status = "okay"; + mediatek,gmac-id = <0>; + phy-mode = "sgmii"; + mediatek,switch = "mt7531"; + reset-gpios = <&gpio 5 GPIO_ACTIVE_HIGH>; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&pinctrl { + spi_flash_pins: spi0-pins-func-1 { + mux { + function = "flash"; + groups = "spi0", "spi0_wp_hold"; + }; + + conf-pu { + pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP"; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_11>; + }; + + conf-pd { + pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO"; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_11>; + }; + }; + + snfi_pins: snfi-pins-func-1 { + mux { + function = "flash"; + groups = "snfi"; + }; + + clk { + pins = "SPI0_CLK"; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_00>; + }; + + conf-pu { + pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP"; + drive-strength = <MTK_DRIVE_6mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_00>; + }; + + conf-pd { + pins = "SPI0_MOSI", "SPI0_MISO"; + drive-strength = <MTK_DRIVE_6mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_00>; + }; + }; + + spic_pins: spi1-pins-func-1 { + mux { + function = "spi"; + groups = "spi1_2"; + }; + }; + + uart1_pins: spi1-pins-func-3 { + mux { + function = "uart"; + groups = "uart1_2"; + }; + }; + + pwm_pins: pwm0-pins-func-1 { + mux { + function = "pwm"; + groups = "pwm0"; + }; + }; + + mmc0_pins_default: mmc0default { + mux { + function = "flash"; + groups = "emmc_51"; + }; + + conf-cmd-dat { + pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2", + "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5", + "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD"; + input-enable; + drive-strength = <MTK_DRIVE_4mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + conf-clk { + pins = "EMMC_CK"; + drive-strength = <MTK_DRIVE_6mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + conf-dsl { + pins = "EMMC_DSL"; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + conf-rst { + pins = "EMMC_RSTB"; + drive-strength = <MTK_DRIVE_4mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; +}; + +&snand { + pinctrl-names = "default"; + pinctrl-0 = <&snfi_pins>; + status = "okay"; + quad-spi; +}; + +&spi0 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi_flash_pins>; + status = "okay"; + must_tx; + enhance_timing; + dma_ext; + ipm_design; + support_quad; + tick_dly = <2>; + sample_sel = <0>; + + spi_nor@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <52000000>; + }; + + spi_nand@1 { + compatible = "spi-nand"; + reg = <1>; + spi-max-frequency = <52000000>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm_pins>; + status = "okay"; +}; + +&watchdog { + status = "disabled"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_default>; + bus-width = <8>; + max-frequency = <52000000>; + cap-mmc-highspeed; + cap-mmc-hw-reset; + vmmc-supply = <&reg_3p3v>; + vqmmc-supply = <&reg_1p8v>; + non-removable; + status = "okay"; +}; diff --git a/arch/arm/dts/mt7986a-sd-rfb.dts b/arch/arm/dts/mt7986a-sd-rfb.dts new file mode 100644 index 0000000000..5807c5d5cc --- /dev/null +++ b/arch/arm/dts/mt7986a-sd-rfb.dts @@ -0,0 +1,177 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2022 MediaTek Inc. + * Author: Sam Shih <sam.shih@mediatek.com> + */ + +/dts-v1/; +#include "mt7986.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "mt7986-rfb"; + compatible = "mediatek,mt7986", "mediatek,mt7986-rfb", + "mediatek,mt7986-sd-rfb"; + chosen { + stdout-path = &uart0; + tick-timer = &timer0; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "disabled"; +}; + +&eth { + status = "okay"; + mediatek,gmac-id = <0>; + phy-mode = "sgmii"; + mediatek,switch = "mt7531"; + reset-gpios = <&gpio 5 GPIO_ACTIVE_HIGH>; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&pinctrl { + spi_flash_pins: spi0-pins-func-1 { + mux { + function = "flash"; + groups = "spi0", "spi0_wp_hold"; + }; + + conf-pu { + pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP"; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_11>; + }; + + conf-pd { + pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO"; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_11>; + }; + }; + + spic_pins: spi1-pins-func-1 { + mux { + function = "spi"; + groups = "spi1_2"; + }; + }; + + uart1_pins: spi1-pins-func-3 { + mux { + function = "uart"; + groups = "uart1_2"; + }; + }; + + pwm_pins: pwm0-pins-func-1 { + mux { + function = "pwm"; + groups = "pwm0"; + }; + }; + + mmc0_pins_default: mmc0default { + mux { + function = "flash"; + groups = "emmc_51"; + }; + + conf-cmd-dat { + pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2", + "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5", + "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD"; + input-enable; + drive-strength = <MTK_DRIVE_4mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + conf-clk { + pins = "EMMC_CK"; + drive-strength = <MTK_DRIVE_6mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + conf-dsl { + pins = "EMMC_DSL"; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + conf-rst { + pins = "EMMC_RSTB"; + drive-strength = <MTK_DRIVE_4mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; +}; + +&spi0 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi_flash_pins>; + status = "okay"; + must_tx; + enhance_timing; + dma_ext; + ipm_design; + support_quad; + tick_dly = <2>; + sample_sel = <0>; + + spi_nor@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <52000000>; + }; + + spi_nand@1 { + compatible = "spi-nand"; + reg = <1>; + spi-max-frequency = <52000000>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm_pins>; + status = "okay"; +}; + +&watchdog { + status = "disabled"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_default>; + bus-width = <4>; + max-frequency = <52000000>; + cap-sd-highspeed; + r_smpl = <1>; + vmmc-supply = <&reg_3p3v>; + vqmmc-supply = <&reg_3p3v>; + status = "okay"; +}; diff --git a/arch/arm/dts/mt7986b-rfb.dts b/arch/arm/dts/mt7986b-rfb.dts new file mode 100644 index 0000000000..0c4e3e878f --- /dev/null +++ b/arch/arm/dts/mt7986b-rfb.dts @@ -0,0 +1,204 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2022 MediaTek Inc. + * Author: Sam Shih <sam.shih@mediatek.com> + */ + +/dts-v1/; +#include "mt7986.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "mt7986-rfb"; + compatible = "mediatek,mt7986", "mediatek,mt7986-rfb"; + chosen { + stdout-path = &uart0; + tick-timer = &timer0; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "disabled"; +}; + +&eth { + status = "okay"; + mediatek,gmac-id = <0>; + phy-mode = "sgmii"; + mediatek,switch = "mt7531"; + reset-gpios = <&gpio 5 GPIO_ACTIVE_HIGH>; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&pinctrl { + spi_flash_pins: spi0-pins-func-1 { + mux { + function = "flash"; + groups = "spi0", "spi0_wp_hold"; + }; + + conf-pu { + pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP"; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_11>; + }; + + conf-pd { + pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO"; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_11>; + }; + }; + + snfi_pins: snfi-pins-func-1 { + mux { + function = "flash"; + groups = "snfi"; + }; + + clk { + pins = "SPI0_CLK"; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_00>; + }; + + conf-pu { + pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP"; + drive-strength = <MTK_DRIVE_6mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_00>; + }; + + conf-pd { + pins = "SPI0_MOSI", "SPI0_MISO"; + drive-strength = <MTK_DRIVE_6mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_00>; + }; + }; + + spic_pins: spi1-pins-func-1 { + mux { + function = "spi"; + groups = "spi1_2"; + }; + }; + + uart1_pins: spi1-pins-func-3 { + mux { + function = "uart"; + groups = "uart1_2"; + }; + }; + + pwm_pins: pwm0-pins-func-1 { + mux { + function = "pwm"; + groups = "pwm0"; + }; + }; + + mmc0_pins_default: mmc0default { + mux { + function = "flash"; + groups = "emmc_45"; + input-schmitt-enable; + }; + + conf-cmd-dat { + pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO", + "SPI0_CS", "SPI0_HOLD", "SPI0_WP", + "SPI1_CLK", "SPI1_MOSI", "SPI1_MISO"; + input-enable; + drive-strength = <MTK_DRIVE_4mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + conf-clk { + pins = "SPI1_CS"; + drive-strength = <MTK_DRIVE_6mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + conf-rst { + pins = "PWM1"; + drive-strength = <MTK_DRIVE_4mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; +}; + +&snand { + pinctrl-names = "default"; + pinctrl-0 = <&snfi_pins>; + status = "okay"; + quad-spi; +}; + +&spi0 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi_flash_pins>; + status = "okay"; + must_tx; + enhance_timing; + dma_ext; + ipm_design; + support_quad; + tick_dly = <2>; + sample_sel = <0>; + + spi_nor@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <52000000>; + }; + + spi_nand@1 { + compatible = "spi-nand"; + reg = <1>; + spi-max-frequency = <52000000>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm_pins>; + status = "okay"; +}; + +&watchdog { + status = "disabled"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_default>; + bus-width = <8>; + max-frequency = <52000000>; + cap-mmc-highspeed; + cap-mmc-hw-reset; + vmmc-supply = <&reg_3p3v>; + non-removable; + status = "okay"; +}; diff --git a/arch/arm/dts/mt7986b-sd-rfb.dts b/arch/arm/dts/mt7986b-sd-rfb.dts new file mode 100644 index 0000000000..48f9320e7a --- /dev/null +++ b/arch/arm/dts/mt7986b-sd-rfb.dts @@ -0,0 +1,173 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2022 MediaTek Inc. + * Author: Sam Shih <sam.shih@mediatek.com> + */ + +/dts-v1/; +#include "mt7986.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "mt7986-rfb"; + compatible = "mediatek,mt7986", "mediatek,mt7986-rfb", + "mediatek,mt7986-sd-rfb"; + chosen { + stdout-path = &uart0; + tick-timer = &timer0; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "disabled"; +}; + +&eth { + status = "okay"; + mediatek,gmac-id = <0>; + phy-mode = "sgmii"; + mediatek,switch = "mt7531"; + reset-gpios = <&gpio 5 GPIO_ACTIVE_HIGH>; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&pinctrl { + spi_flash_pins: spi0-pins-func-1 { + mux { + function = "flash"; + groups = "spi0", "spi0_wp_hold"; + }; + + conf-pu { + pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP"; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_11>; + }; + + conf-pd { + pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO"; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_11>; + }; + }; + + spic_pins: spi1-pins-func-1 { + mux { + function = "spi"; + groups = "spi1_2"; + }; + }; + + uart1_pins: spi1-pins-func-3 { + mux { + function = "uart"; + groups = "uart1_2"; + }; + }; + + pwm_pins: pwm0-pins-func-1 { + mux { + function = "pwm"; + groups = "pwm0"; + }; + }; + + mmc0_pins_default: mmc0default { + mux { + function = "flash"; + groups = "emmc_45"; + input-schmitt-enable; + }; + + conf-cmd-dat { + pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO", + "SPI0_CS", "SPI0_HOLD", "SPI0_WP", + "SPI1_CLK", "SPI1_MOSI", "SPI1_MISO"; + input-enable; + drive-strength = <MTK_DRIVE_4mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + conf-clk { + pins = "SPI1_CS"; + drive-strength = <MTK_DRIVE_6mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + conf-rst { + pins = "PWM1"; + drive-strength = <MTK_DRIVE_4mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; +}; + +&spi0 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi_flash_pins>; + status = "okay"; + must_tx; + enhance_timing; + dma_ext; + ipm_design; + support_quad; + tick_dly = <2>; + sample_sel = <0>; + + spi_nor@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <52000000>; + }; + + spi_nand@1 { + compatible = "spi-nand"; + reg = <1>; + spi-max-frequency = <52000000>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm_pins>; + status = "okay"; +}; + +&watchdog { + status = "disabled"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_default>; + bus-width = <4>; + max-frequency = <52000000>; + cap-sd-highspeed; + r_smpl = <1>; + vmmc-supply = <&reg_3p3v>; + vqmmc-supply = <&reg_3p3v>; + status = "okay"; +}; diff --git a/board/mediatek/mt7986/MAINTAINERS b/board/mediatek/mt7986/MAINTAINERS new file mode 100644 index 0000000000..fddee20001 --- /dev/null +++ b/board/mediatek/mt7986/MAINTAINERS @@ -0,0 +1,10 @@ +MT7986 +M: Sam Shih <sam.shih@mediatek.com> +S: Maintained +F: board/mediatek/mt7986 +F: include/configs/mt7986.h +F: configs/mt7986_rfb_defconfig +F: configs/mt7986a_emmc_rfb_defconfig +F: configs/mt7986a_sd_rfb_defconfig +F: configs/mt7986b_emmc_rfb_defconfig +F: configs/mt7986b_sd_rfb_defconfig diff --git a/board/mediatek/mt7986/Makefile b/board/mediatek/mt7986/Makefile new file mode 100644 index 0000000000..7bb84fa2f4 --- /dev/null +++ b/board/mediatek/mt7986/Makefile @@ -0,0 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0 + +obj-y += mt7986_rfb.o diff --git a/board/mediatek/mt7986/mt7986_rfb.c b/board/mediatek/mt7986/mt7986_rfb.c new file mode 100644 index 0000000000..846c715ca0 --- /dev/null +++ b/board/mediatek/mt7986/mt7986_rfb.c @@ -0,0 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2022 MediaTek Inc. + * Author: Sam Shih <sam.shih@mediatek.com> + */ + +int board_init(void) +{ + return 0; +} diff --git a/configs/mt7986_rfb_defconfig b/configs/mt7986_rfb_defconfig new file mode 100644 index 0000000000..ff1e63b6bd --- /dev/null +++ b/configs/mt7986_rfb_defconfig @@ -0,0 +1,66 @@ +CONFIG_ARM=y +CONFIG_POSITION_INDEPENDENT=y +CONFIG_ARCH_MEDIATEK=y +CONFIG_SYS_TEXT_BASE=0x41e00000 +CONFIG_SYS_MALLOC_F_LEN=0x4000 +CONFIG_NR_DRAM_BANKS=1 +CONFIG_DEFAULT_DEVICE_TREE="mt7986a-rfb" +CONFIG_TARGET_MT7986=y +CONFIG_DEBUG_UART_BASE=0x11002000 +CONFIG_DEBUG_UART_CLOCK=40000000 +CONFIG_SYS_LOAD_ADDR=0x46000000 +CONFIG_DEBUG_UART=y +# CONFIG_AUTOBOOT is not set +CONFIG_DEFAULT_FDT_FILE="mt7986a-rfb" +CONFIG_LOGLEVEL=7 +CONFIG_LOG=y +CONFIG_SYS_PROMPT="MT7986> " +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=1049 +# CONFIG_BOOTM_NETBSD is not set +# CONFIG_BOOTM_PLAN9 is not set +# CONFIG_BOOTM_RTEMS is not set +# CONFIG_BOOTM_VXWORKS is not set +# CONFIG_CMD_ELF is not set +# CONFIG_CMD_UNLZ4 is not set +# CONFIG_CMD_UNZIP is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_MTD=y +CONFIG_CMD_SF_TEST=y +CONFIG_CMD_PING=y +CONFIG_CMD_SMC=y +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_REGMAP=y +CONFIG_SYSCON=y +CONFIG_CLK=y +# CONFIG_MMC is not set +CONFIG_MTD=y +CONFIG_DM_MTD=y +CONFIG_MTD_SPI_NAND=y +CONFIG_DM_SPI_FLASH=y +CONFIG_SPI_FLASH_SFDP_SUPPORT=y +CONFIG_SPI_FLASH_EON=y +CONFIG_SPI_FLASH_GIGADEVICE=y +CONFIG_SPI_FLASH_ISSI=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_WINBOND=y +CONFIG_SPI_FLASH_XMC=y +CONFIG_SPI_FLASH_XTX=y +CONFIG_SPI_FLASH_MTD=y +CONFIG_PHY_FIXED=y +CONFIG_DM_ETH=y +CONFIG_MEDIATEK_ETH=y +CONFIG_PINCTRL=y +CONFIG_PINCONF=y +CONFIG_PINCTRL_MT7986=y +CONFIG_POWER_DOMAIN=y +CONFIG_MTK_POWER_DOMAIN=y +CONFIG_DM_SERIAL=y +CONFIG_MTK_SERIAL=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_MTK_SPIM=y +CONFIG_HEXDUMP=y diff --git a/configs/mt7986a_emmc_rfb_defconfig b/configs/mt7986a_emmc_rfb_defconfig new file mode 100644 index 0000000000..3e368b68de --- /dev/null +++ b/configs/mt7986a_emmc_rfb_defconfig @@ -0,0 +1,64 @@ +CONFIG_ARM=y +CONFIG_POSITION_INDEPENDENT=y +CONFIG_ARCH_MEDIATEK=y +CONFIG_SYS_TEXT_BASE=0x41e00000 +CONFIG_SYS_MALLOC_F_LEN=0x4000 +CONFIG_NR_DRAM_BANKS=1 +CONFIG_ENV_SIZE=0x80000 +CONFIG_ENV_OFFSET=0x300000 +CONFIG_DEFAULT_DEVICE_TREE="mt7986a-emmc-rfb" +CONFIG_TARGET_MT7986=y +CONFIG_DEBUG_UART_BASE=0x11002000 +CONFIG_DEBUG_UART_CLOCK=40000000 +CONFIG_SYS_LOAD_ADDR=0x46000000 +CONFIG_DEBUG_UART=y +# CONFIG_AUTOBOOT is not set +CONFIG_DEFAULT_FDT_FILE="mt7986a-emmc-rfb" +CONFIG_LOGLEVEL=7 +CONFIG_LOG=y +CONFIG_SYS_PROMPT="MT7986> " +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=1049 +# CONFIG_BOOTM_NETBSD is not set +# CONFIG_BOOTM_PLAN9 is not set +# CONFIG_BOOTM_RTEMS is not set +# CONFIG_BOOTM_VXWORKS is not set +# CONFIG_CMD_ELF is not set +# CONFIG_CMD_UNLZ4 is not set +# CONFIG_CMD_UNZIP is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_GPT_RENAME=y +CONFIG_CMD_LSBLK=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PART=y +CONFIG_CMD_READ=y +CONFIG_CMD_PING=y +CONFIG_CMD_SMC=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_PARTITION_TYPE_GUID=y +CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_IS_IN_MMC=y +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_REGMAP=y +CONFIG_SYSCON=y +CONFIG_CLK=y +CONFIG_MMC_HS200_SUPPORT=y +CONFIG_MMC_MTK=y +CONFIG_PHY_FIXED=y +CONFIG_DM_ETH=y +CONFIG_MEDIATEK_ETH=y +CONFIG_PINCTRL=y +CONFIG_PINCONF=y +CONFIG_PINCTRL_MT7986=y +CONFIG_POWER_DOMAIN=y +CONFIG_MTK_POWER_DOMAIN=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_SERIAL=y +CONFIG_MTK_SERIAL=y +CONFIG_FAT_WRITE=y +CONFIG_HEXDUMP=y +# CONFIG_EFI_LOADER is not set diff --git a/configs/mt7986a_sd_rfb_defconfig b/configs/mt7986a_sd_rfb_defconfig new file mode 100644 index 0000000000..b9a69a3d3d --- /dev/null +++ b/configs/mt7986a_sd_rfb_defconfig @@ -0,0 +1,64 @@ +CONFIG_ARM=y +CONFIG_POSITION_INDEPENDENT=y +CONFIG_ARCH_MEDIATEK=y +CONFIG_SYS_TEXT_BASE=0x41e00000 +CONFIG_SYS_MALLOC_F_LEN=0x4000 +CONFIG_NR_DRAM_BANKS=1 +CONFIG_ENV_SIZE=0x80000 +CONFIG_ENV_OFFSET=0x300000 +CONFIG_DEFAULT_DEVICE_TREE="mt7986a-sd-rfb" +CONFIG_TARGET_MT7986=y +CONFIG_DEBUG_UART_BASE=0x11002000 +CONFIG_DEBUG_UART_CLOCK=40000000 +CONFIG_SYS_LOAD_ADDR=0x46000000 +CONFIG_DEBUG_UART=y +# CONFIG_AUTOBOOT is not set +CONFIG_DEFAULT_FDT_FILE="mt7986a-sd-rfb" +CONFIG_LOGLEVEL=7 +CONFIG_LOG=y +CONFIG_SYS_PROMPT="MT7986> " +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=1049 +# CONFIG_BOOTM_NETBSD is not set +# CONFIG_BOOTM_PLAN9 is not set +# CONFIG_BOOTM_RTEMS is not set +# CONFIG_BOOTM_VXWORKS is not set +# CONFIG_CMD_ELF is not set +# CONFIG_CMD_UNLZ4 is not set +# CONFIG_CMD_UNZIP is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_GPT_RENAME=y +CONFIG_CMD_LSBLK=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PART=y +CONFIG_CMD_READ=y +CONFIG_CMD_PING=y +CONFIG_CMD_SMC=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_PARTITION_TYPE_GUID=y +CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_IS_IN_MMC=y +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_REGMAP=y +CONFIG_SYSCON=y +CONFIG_CLK=y +CONFIG_MMC_HS200_SUPPORT=y +CONFIG_MMC_MTK=y +CONFIG_PHY_FIXED=y +CONFIG_DM_ETH=y +CONFIG_MEDIATEK_ETH=y +CONFIG_PINCTRL=y +CONFIG_PINCONF=y +CONFIG_PINCTRL_MT7986=y +CONFIG_POWER_DOMAIN=y +CONFIG_MTK_POWER_DOMAIN=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_SERIAL=y +CONFIG_MTK_SERIAL=y +CONFIG_FAT_WRITE=y +CONFIG_HEXDUMP=y +# CONFIG_EFI_LOADER is not set diff --git a/configs/mt7986b_emmc_rfb_defconfig b/configs/mt7986b_emmc_rfb_defconfig new file mode 100644 index 0000000000..c3a72a342a --- /dev/null +++ b/configs/mt7986b_emmc_rfb_defconfig @@ -0,0 +1,64 @@ +CONFIG_ARM=y +CONFIG_POSITION_INDEPENDENT=y +CONFIG_ARCH_MEDIATEK=y +CONFIG_SYS_TEXT_BASE=0x41e00000 +CONFIG_SYS_MALLOC_F_LEN=0x4000 +CONFIG_NR_DRAM_BANKS=1 +CONFIG_ENV_SIZE=0x80000 +CONFIG_ENV_OFFSET=0x300000 +CONFIG_DEFAULT_DEVICE_TREE="mt7986b-emmc-rfb" +CONFIG_TARGET_MT7986=y +CONFIG_DEBUG_UART_BASE=0x11002000 +CONFIG_DEBUG_UART_CLOCK=40000000 +CONFIG_SYS_LOAD_ADDR=0x46000000 +CONFIG_DEBUG_UART=y +# CONFIG_AUTOBOOT is not set +CONFIG_DEFAULT_FDT_FILE="mt7986b-emmc-rfb" +CONFIG_LOGLEVEL=7 +CONFIG_LOG=y +CONFIG_SYS_PROMPT="MT7986> " +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=1049 +# CONFIG_BOOTM_NETBSD is not set +# CONFIG_BOOTM_PLAN9 is not set +# CONFIG_BOOTM_RTEMS is not set +# CONFIG_BOOTM_VXWORKS is not set +# CONFIG_CMD_ELF is not set +# CONFIG_CMD_UNLZ4 is not set +# CONFIG_CMD_UNZIP is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_GPT_RENAME=y +CONFIG_CMD_LSBLK=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PART=y +CONFIG_CMD_READ=y +CONFIG_CMD_PING=y +CONFIG_CMD_SMC=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_PARTITION_TYPE_GUID=y +CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_IS_IN_MMC=y +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_REGMAP=y +CONFIG_SYSCON=y +CONFIG_CLK=y +CONFIG_MMC_HS200_SUPPORT=y +CONFIG_MMC_MTK=y +CONFIG_PHY_FIXED=y +CONFIG_DM_ETH=y +CONFIG_MEDIATEK_ETH=y +CONFIG_PINCTRL=y +CONFIG_PINCONF=y +CONFIG_PINCTRL_MT7986=y +CONFIG_POWER_DOMAIN=y +CONFIG_MTK_POWER_DOMAIN=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_SERIAL=y +CONFIG_MTK_SERIAL=y +CONFIG_FAT_WRITE=y +CONFIG_HEXDUMP=y +# CONFIG_EFI_LOADER is not set diff --git a/configs/mt7986b_sd_rfb_defconfig b/configs/mt7986b_sd_rfb_defconfig new file mode 100644 index 0000000000..0e5ab55ab5 --- /dev/null +++ b/configs/mt7986b_sd_rfb_defconfig @@ -0,0 +1,64 @@ +CONFIG_ARM=y +CONFIG_POSITION_INDEPENDENT=y +CONFIG_ARCH_MEDIATEK=y +CONFIG_SYS_TEXT_BASE=0x41e00000 +CONFIG_SYS_MALLOC_F_LEN=0x4000 +CONFIG_NR_DRAM_BANKS=1 +CONFIG_ENV_SIZE=0x80000 +CONFIG_ENV_OFFSET=0x300000 +CONFIG_DEFAULT_DEVICE_TREE="mt7986b-sd-rfb" +CONFIG_TARGET_MT7986=y +CONFIG_DEBUG_UART_BASE=0x11002000 +CONFIG_DEBUG_UART_CLOCK=40000000 +CONFIG_SYS_LOAD_ADDR=0x46000000 +CONFIG_DEBUG_UART=y +# CONFIG_AUTOBOOT is not set +CONFIG_DEFAULT_FDT_FILE="mt7986b-sd-rfb" +CONFIG_LOGLEVEL=7 +CONFIG_LOG=y +CONFIG_SYS_PROMPT="MT7986> " +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=1049 +# CONFIG_BOOTM_NETBSD is not set +# CONFIG_BOOTM_PLAN9 is not set +# CONFIG_BOOTM_RTEMS is not set +# CONFIG_BOOTM_VXWORKS is not set +# CONFIG_CMD_ELF is not set +# CONFIG_CMD_UNLZ4 is not set +# CONFIG_CMD_UNZIP is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_GPT_RENAME=y +CONFIG_CMD_LSBLK=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PART=y +CONFIG_CMD_READ=y +CONFIG_CMD_PING=y +CONFIG_CMD_SMC=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_PARTITION_TYPE_GUID=y +CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_IS_IN_MMC=y +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_REGMAP=y +CONFIG_SYSCON=y +CONFIG_CLK=y +CONFIG_MMC_HS200_SUPPORT=y +CONFIG_MMC_MTK=y +CONFIG_PHY_FIXED=y +CONFIG_DM_ETH=y +CONFIG_MEDIATEK_ETH=y +CONFIG_PINCTRL=y +CONFIG_PINCONF=y +CONFIG_PINCTRL_MT7986=y +CONFIG_POWER_DOMAIN=y +CONFIG_MTK_POWER_DOMAIN=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_SERIAL=y +CONFIG_MTK_SERIAL=y +CONFIG_FAT_WRITE=y +CONFIG_HEXDUMP=y +# CONFIG_EFI_LOADER is not set diff --git a/include/configs/mt7986.h b/include/configs/mt7986.h new file mode 100644 index 0000000000..b28fc0f613 --- /dev/null +++ b/include/configs/mt7986.h @@ -0,0 +1,26 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Configuration for MediaTek MT7986 SoC + * + * Copyright (C) 2022 MediaTek Inc. + * Author: Sam Shih <sam.shih@mediatek.com> + */ + +#ifndef __MT7986_H +#define __MT7986_H + +#include <linux/sizes.h> + +#define CONFIG_SYS_NONCACHED_MEMORY SZ_1M +#define CONFIG_SYS_MMC_ENV_DEV 0 + +/* Uboot definition */ +#define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE + +/* SPL -> Uboot */ +#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE + +/* DRAM */ +#define CONFIG_SYS_SDRAM_BASE 0x40000000 + +#endif

[03/31] board: mediatek: add MT7986 reference boards

Commit Message

Comments

Patch