Show patches with: State = Action Required       |    Archived = No       |   1291 patches
« 1 2 3 4 … 12 13 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[8/8] cmd: tlv_eeprom: fix accessing invalid parameter Add SD card and eMMC support for SpacemiT K1 - - - - --- 2026-06-12 Raymond Mao Andes New
[7/8] cmd: meminfo: fix the lmb info for large DRAM Add SD card and eMMC support for SpacemiT K1 - - - - --- 2026-06-12 Raymond Mao Andes New
[6/8] cmd: meminfo: widen memory map addresses to phys_addr_t Add SD card and eMMC support for SpacemiT K1 - - - - --- 2026-06-12 Raymond Mao Andes New
[5/8] doc: spacemit: flash on K1 SoC based boards Add SD card and eMMC support for SpacemiT K1 - - - - --- 2026-06-12 Raymond Mao Andes New
[4/8] configs: k1: enable SD and eMMC support Add SD card and eMMC support for SpacemiT K1 - - - - --- 2026-06-12 Raymond Mao Andes New
[3/8] dts: k1: add SD card support in u-boot overlay Add SD card and eMMC support for SpacemiT K1 - - - - --- 2026-06-12 Raymond Mao Andes New
[2/8] mmc: k1: add sdhci platform driver Add SD card and eMMC support for SpacemiT K1 - - - - --- 2026-06-12 Raymond Mao Andes New
[1/8] spacemit: k1: select boot device via config registers Add SD card and eMMC support for SpacemiT K1 - - - - --- 2026-06-12 Raymond Mao Andes New
[v3,9/9] configs: k1: enable pinctrl and gpio Add pinctrl/GPIO and SPI NOR support for Spacemit K1 - - - - --- 2026-06-11 Raymond Mao Andes New
[v3,8/9] gpio: add gpio driver for Spacemit K1 SoC Add pinctrl/GPIO and SPI NOR support for Spacemit K1 - - - - --- 2026-06-11 Raymond Mao Andes New
[v3,7/9] pinctrl: add pinctrl driver for Spacemit K1 SoC Add pinctrl/GPIO and SPI NOR support for Spacemit K1 - - - - --- 2026-06-11 Raymond Mao Andes New
[v3,6/9] spacemit: k1: Add multiple device tree support Add pinctrl/GPIO and SPI NOR support for Spacemit K1 - - - - --- 2026-06-11 Raymond Mao Andes New
[v3,5/9] riscv: binman: Always set default configuration in FIT image Add pinctrl/GPIO and SPI NOR support for Spacemit K1 - - - - --- 2026-06-11 Raymond Mao Andes New
[v3,4/9] spl: k1: enable SPI NOR flash detection and boot Add pinctrl/GPIO and SPI NOR support for Spacemit K1 - - - - --- 2026-06-11 Raymond Mao Andes New
[v3,3/9] spi: fsl: add support for Spacemit K1 SoC Add pinctrl/GPIO and SPI NOR support for Spacemit K1 - - - - --- 2026-06-11 Raymond Mao Andes New
[v3,2/9] mtd: spi: enable spi_nor_remove() in soft reset config Add pinctrl/GPIO and SPI NOR support for Spacemit K1 - - - - --- 2026-06-11 Raymond Mao Andes New
[v3,1/9] mtd: spi: select SPL_SPI_FLASH_TINY in SPL stage Add pinctrl/GPIO and SPI NOR support for Spacemit K1 - - - - --- 2026-06-11 Raymond Mao Andes New
serial: sifive: remove busy-loops from getc and putc ops serial: sifive: remove busy-loops from getc and putc ops - - - - --- 2026-06-07 Naveen Kumar Chaudhary Andes New
[RESEND,v2,2/2] board: starfive: visionfive2: Support VisionFive 2 Lite eMMC Add support for StarFive VisionFive 2 Lite eMMC board - - 1 - --- 2026-05-29 Hal Feng Andes New
[RESEND,v2,1/2] configs: visionfive2: Add VisionFive 2 Lite eMMC DT to OF_LIST Add support for StarFive VisionFive 2 Lite eMMC board - - 1 - --- 2026-05-29 Hal Feng Andes New
[v2,8/8] dt-bindings: reset: drop spacemit-k1-reset.h riscv: spacemit: k1: add clock and reset drivers, switch to upstream DT - - - - --- 2026-05-27 Guodong Xu Andes New
[v2,7/8] reset: spacemit: k1: drop legacy spacemit,k1-reset driver riscv: spacemit: k1: add clock and reset drivers, switch to upstream DT - - - - --- 2026-05-27 Guodong Xu Andes New
[v2,6/8] dts: k1: drop legacy local DT files riscv: spacemit: k1: add clock and reset drivers, switch to upstream DT - - - - --- 2026-05-27 Guodong Xu Andes New
[v2,5/8] dts: k1: switch BPI-F3 build to upstream DT riscv: spacemit: k1: add clock and reset drivers, switch to upstream DT - - - - --- 2026-05-27 Guodong Xu Andes New
[v2,4/8] configs: bananapi-f3: enable Spacemit K1 clock driver riscv: spacemit: k1: add clock and reset drivers, switch to upstream DT - - - - --- 2026-05-27 Guodong Xu Andes New
[v2,3/8] clk: spacemit: k1: spawn reset device from per-syscon clock drivers riscv: spacemit: k1: add clock and reset drivers, switch to upstream DT - - - - --- 2026-05-27 Guodong Xu Andes New
[v2,2/8] reset: spacemit: k1: introduce syscon-bound reset driver riscv: spacemit: k1: add clock and reset drivers, switch to upstream DT - - - - --- 2026-05-27 Guodong Xu Andes New
[v2,1/8] clk: spacemit: Add support for K1 SoC riscv: spacemit: k1: add clock and reset drivers, switch to upstream DT - - - - --- 2026-05-27 Guodong Xu Andes New
rng: jh7110: Fix invalid usage of dev_read_addr rng: jh7110: Fix invalid usage of dev_read_addr - - 1 - --- 2026-05-26 Francois Berder Andes New
[v2,9/9] configs: k1: enable pinctrl and gpio riscv: spacemit: k1: add pinctrl/GPIO and SPI NOR support - - - - --- 2026-05-20 Guodong Xu Andes New
[v2,8/9] gpio: add gpio driver for Spacemit K1 SoC riscv: spacemit: k1: add pinctrl/GPIO and SPI NOR support - - - - --- 2026-05-20 Guodong Xu Andes New
[v2,7/9] pinctrl: add pinctrl driver for Spacemit K1 SoC riscv: spacemit: k1: add pinctrl/GPIO and SPI NOR support - - - - --- 2026-05-20 Guodong Xu Andes New
[v2,6/9] spacemit: k1: Add multiple device tree support riscv: spacemit: k1: add pinctrl/GPIO and SPI NOR support - - - - --- 2026-05-20 Guodong Xu Andes New
[v2,5/9] riscv: binman: Always set default configuration in FIT image riscv: spacemit: k1: add pinctrl/GPIO and SPI NOR support - - - - --- 2026-05-20 Guodong Xu Andes New
[v2,4/9] spl: k1: enable SPI NOR flash detection and boot riscv: spacemit: k1: add pinctrl/GPIO and SPI NOR support - - - - --- 2026-05-20 Guodong Xu Andes New
[v2,3/9] spi: fsl: add support for Spacemit K1 SoC riscv: spacemit: k1: add pinctrl/GPIO and SPI NOR support - - - - --- 2026-05-20 Guodong Xu Andes New
[v2,2/9] mtd: spi: enable spi_nor_remove() in soft reset config riscv: spacemit: k1: add pinctrl/GPIO and SPI NOR support - - - - --- 2026-05-20 Guodong Xu Andes New
[v2,1/9] mtd: spi: select SPL_SPI_FLASH_TINY in SPL stage riscv: spacemit: k1: add pinctrl/GPIO and SPI NOR support 1 - - - --- 2026-05-20 Guodong Xu Andes New
[v4,14/14] doc: spacemit: add K1 SPL build and test guide riscv: spacemit: k1: add SPL support - - - - --- 2026-05-19 Guodong Xu Andes New
[v4,13/14] board: k1: enable pmic in spl riscv: spacemit: k1: add SPL support - 1 - - --- 2026-05-19 Guodong Xu Andes New
[v4,12/14] power: regulator: add support for Spacemit P1 SoC riscv: spacemit: k1: add SPL support 1 - - - --- 2026-05-19 Guodong Xu Andes New
[v4,11/14] power: pmic: add support for Spacemit P1 PMIC riscv: spacemit: k1: add SPL support 1 - - - --- 2026-05-19 Guodong Xu Andes New
[v4,10/14] spacemit: k1: Add DDR firmware support to SPL riscv: spacemit: k1: add SPL support - - - - --- 2026-05-19 Guodong Xu Andes New
[v4,09/14] spacemit: k1: add TLV EEPROM support in SPL riscv: spacemit: k1: add SPL support - - - - --- 2026-05-19 Guodong Xu Andes New
[v4,08/14] i2c: k1: add I2C driver support riscv: spacemit: k1: add SPL support - - 1 - --- 2026-05-19 Guodong Xu Andes New
[v4,07/14] board: k1: initialize clock and serial devices in SPL riscv: spacemit: k1: add SPL support - - - - --- 2026-05-19 Guodong Xu Andes New
[v4,06/14] dts: k1: enable clocks in SPL riscv: spacemit: k1: add SPL support - - - - --- 2026-05-19 Guodong Xu Andes New
[v4,05/14] configs: k1: add default option for clock driver in SPL riscv: spacemit: k1: add SPL support - - - - --- 2026-05-19 Guodong Xu Andes New
[v4,04/14] clk: spacemit: k1: prune SPL clock tree riscv: spacemit: k1: add SPL support - - - - --- 2026-05-19 Guodong Xu Andes New
[v4,03/14] configs: k1: enable early timer support riscv: spacemit: k1: add SPL support - - - - --- 2026-05-19 Guodong Xu Andes New
[v4,02/14] spacemit: k1: enable SPL with debug UART riscv: spacemit: k1: add SPL support - - - - --- 2026-05-19 Guodong Xu Andes New
[v4,01/14] spacemit: k1: support multi-board infrastructure riscv: spacemit: k1: add SPL support - - - - --- 2026-05-19 Guodong Xu Andes New
[v3,2/2] riscv: Exclude ACLINT for TARGET_XILINX_MBV [v3,1/2] riscv: Make RISCV_ACLINT visible - - - - --- 2026-05-15 Michal Simek Andes New
[v3,1/2] riscv: Make RISCV_ACLINT visible [v3,1/2] riscv: Make RISCV_ACLINT visible - - 1 - --- 2026-05-15 Michal Simek Andes New
[v2] riscv: Skip riscv_cpu_setup() when CPU driver is disabled [v2] riscv: Skip riscv_cpu_setup() when CPU driver is disabled - - 1 - --- 2026-05-11 Michal Simek Andes New
xilinx: mbv: Enable SPL_REMAKE_ELF support xilinx: mbv: Enable SPL_REMAKE_ELF support - - - - --- 2026-05-05 Michal Simek Andes New
[v2,2/2] board: starfive: visionfive2: Support VisionFive 2 Lite eMMC Add support for StarFive VisionFive 2 Lite eMMC board - - 1 - --- 2026-05-04 Hal Feng Andes New
[v2,1/2] configs: visionfive2: Add VisionFive 2 Lite eMMC DT to OF_LIST Add support for StarFive VisionFive 2 Lite eMMC board - - 1 - --- 2026-05-04 Hal Feng Andes New
[v2,2/2] riscv: Exclude ACLINT for TARGET_XILINX_MBV [v2,1/2] riscv: Make RISCV_ACLINT visible - - - - --- 2026-05-04 Michal Simek Andes New
[v2,1/2] riscv: Make RISCV_ACLINT visible [v2,1/2] riscv: Make RISCV_ACLINT visible - - - - --- 2026-05-04 Michal Simek Andes New
riscv: dts: cv18xx: fix spi node name riscv: dts: cv18xx: fix spi node name - - - - --- 2026-04-30 Hiago De Franco Andes New
doc: sophgo: licheerv_nano: fix incorrect step numbering doc: sophgo: licheerv_nano: fix incorrect step numbering - - - - --- 2026-04-30 Hiago De Franco Andes New
riscv: Disable -fpic for SPL builds riscv: Disable -fpic for SPL builds - - - - --- 2026-04-30 Michal Simek Andes New
riscv: Skip riscv_cpu_setup() when CPU driver is disabled riscv: Skip riscv_cpu_setup() when CPU driver is disabled - - 1 - --- 2026-04-30 Michal Simek Andes New
[16/16] spacemit: k1: rename device tree prefix from "k1-" to "k1_" Add PIN and SPI support for Spacemit K1 - - - - --- 2026-04-22 Raymond Mao Andes New
[15/16] spacemit: k1: Add support for mmc regulator initialization Add PIN and SPI support for Spacemit K1 - - - - --- 2026-04-22 Raymond Mao Andes New
[14/16] spacemit: k1: Add multiple device tree support Add PIN and SPI support for Spacemit K1 - - - - --- 2026-04-22 Raymond Mao Andes New
[13/16] spacemit: k1: append RISCV_MMODE_TIMERBASE Add PIN and SPI support for Spacemit K1 - - - - --- 2026-04-22 Raymond Mao Andes New
[12/16] riscv: binman: Always set default configuration in FIT image Add PIN and SPI support for Spacemit K1 - - - - --- 2026-04-22 Raymond Mao Andes New
[11/16] board: k1: enable SPI NOR flash in SPL Add PIN and SPI support for Spacemit K1 - - - - --- 2026-04-22 Raymond Mao Andes New
[10/16] dts: k1: add QSPI controller support Add PIN and SPI support for Spacemit K1 - - - - --- 2026-04-22 Raymond Mao Andes New
[09/16] spi: fsl: add support for Spacemit K1 SoC Add PIN and SPI support for Spacemit K1 - - - - --- 2026-04-22 Raymond Mao Andes New
[08/16] mtd: spi: enable spi_nor_remove() in soft reset config Add PIN and SPI support for Spacemit K1 - - - - --- 2026-04-22 Raymond Mao Andes New
[07/16] mtd: spi: select SPL_SPI_FLASH_TINY in SPL stage Add PIN and SPI support for Spacemit K1 - - - - --- 2026-04-22 Raymond Mao Andes New
[06/16] configs: k1: enable pinctrl and gpio Add PIN and SPI support for Spacemit K1 - - - - --- 2026-04-22 Raymond Mao Andes New
[05/16] dts: k1: remove embedded subnode in pin configs Add PIN and SPI support for Spacemit K1 - - - - --- 2026-04-22 Raymond Mao Andes New
[04/16] dts: k1: import pinctrl dts file from upstream folder Add PIN and SPI support for Spacemit K1 - - - - --- 2026-04-22 Raymond Mao Andes New
[03/16] dts: k1: fix gpio ranges Add PIN and SPI support for Spacemit K1 - - - - --- 2026-04-22 Raymond Mao Andes New
[02/16] pinctrl: add pinctrl driver for Spacemit K1 SoC Add PIN and SPI support for Spacemit K1 - - - - --- 2026-04-22 Raymond Mao Andes New
[01/16] gpio: add gpio driver for Spacemit K1 SoC Add PIN and SPI support for Spacemit K1 - - - - --- 2026-04-22 Raymond Mao Andes New
[v7,7/7] riscv: p8700: Add Coherence Manager (CM) and IOCU support riscv: Add support for P8700 platform on Boston board - - - - --- 2026-04-17 Uros Stajic Andes New
[v7,6/7] net: pch_gbe: Add PHY reset and MAC address fallback for RISC-V riscv: Add support for P8700 platform on Boston board - - - - --- 2026-04-17 Uros Stajic Andes New
[v7,5/7] riscv: Add syscon driver for MIPS GIC block riscv: Add support for P8700 platform on Boston board - - - - --- 2026-04-17 Uros Stajic Andes New
[v7,4/7] pci: xilinx: Avoid writing memory base/limit for root bridge riscv: Add support for P8700 platform on Boston board - - - - --- 2026-04-17 Uros Stajic Andes New
[v7,3/7] gpio: Add GPIO driver for Intel EG20T riscv: Add support for P8700 platform on Boston board - - - - --- 2026-04-17 Uros Stajic Andes New
[v7,2/7] board: boston-riscv: Add initial support for P8700 Boston board riscv: Add support for P8700 platform on Boston board - - 1 - --- 2026-04-17 Uros Stajic Andes New
[v7,1/7] riscv: Add initial support for P8700 SoC riscv: Add support for P8700 platform on Boston board - - 1 - --- 2026-04-17 Uros Stajic Andes New
[v2] doc: spacemit: add K1 SPL build and test guide [v2] doc: spacemit: add K1 SPL build and test guide - - - - --- 2026-03-27 Guodong Xu Andes New
[v3,16/16] board: k1: enable pmic in spl Add board support for Spacemit K1 SoC in SPL - - - - --- 2026-03-25 Raymond Mao Andes New
[v3,15/16] power: regulator: add support for Spacemit P1 SoC Add board support for Spacemit K1 SoC in SPL 1 - - - --- 2026-03-25 Raymond Mao Andes New
[v3,14/16] power: pmic: add support for Spacemit P1 PMIC Add board support for Spacemit K1 SoC in SPL 1 - - - --- 2026-03-25 Raymond Mao Andes New
[v3,13/16] spacemit: k1: Add DDR firmware support to SPL Add board support for Spacemit K1 SoC in SPL - - - - --- 2026-03-25 Raymond Mao Andes New
[v3,12/16] spacemit: k1: add TLV EEPROM support in SPL Add board support for Spacemit K1 SoC in SPL - - - - --- 2026-03-25 Raymond Mao Andes New
[v3,11/16] i2c: k1: add I2C driver support Add board support for Spacemit K1 SoC in SPL - - 1 - --- 2026-03-25 Raymond Mao Andes New
[v3,10/16] configs: k1: add default option for clock driver in SPL Add board support for Spacemit K1 SoC in SPL - - - - --- 2026-03-25 Raymond Mao Andes New
[v3,09/16] board: k1: initialize clock and serial devices in SPL Add board support for Spacemit K1 SoC in SPL - - - - --- 2026-03-25 Raymond Mao Andes New
[v3,08/16] dts: k1: enable clocks in SPL Add board support for Spacemit K1 SoC in SPL - - - - --- 2026-03-25 Raymond Mao Andes New
[v3,07/16] clk: spacemit: Add support for K1 SoC Add board support for Spacemit K1 SoC in SPL - - - - --- 2026-03-25 Raymond Mao Andes New
[v3,06/16] dts: k1: import dts file from upstream folder Add board support for Spacemit K1 SoC in SPL - - - - --- 2026-03-25 Raymond Mao Andes New
[v3,05/16] dt-bindings: clock: import k1-syscon from upstream Add board support for Spacemit K1 SoC in SPL - - - - --- 2026-03-25 Raymond Mao Andes New
« 1 2 3 4 … 12 13 »