mbox series

[0/3] ARM: dts: fix Ethernet and random MAC's on WeTek Hub/Play2

Message ID 20240316135430.826898-1-christianshewitt@gmail.com
Headers show
Series ARM: dts: fix Ethernet and random MAC's on WeTek Hub/Play2 | expand

Message

Christian Hewitt March 16, 2024, 1:54 p.m. UTC 
In submitting the original patches for WeTek Hub/Play2 I appear to have
squashed an experimental change to place the u-boot.dtsi file on the common
board dtsi, but this was incorrect and results in broken Ethernet. Patch 1
creates per-board u-boot.dtsi files to fix that. However, while the NIC is
now probed correctly this results in random MAC addresses. Setting the p200
family in board configs also does not work, so patch 2 revises (overwrites)
the board init function using the same code as VIM3 which reads the factory
MAC from efuse correctly, and patch 3 sets board family to ensure boards
have a static MAC. The alternative would be to create a dedicated board
definition for wetek boards. If that would be preferred, let me know and I
can rework the changes to do that. And apologies for the mistake on the
original submission.

Christian Hewitt (3):
  ARM: dts: fix Ethernet on WeTek Hub/Play2
  ARM: board: meson: update efuse MAC reading code
  configs: amlogic: set board family to avoid random MAC on WeTek
    Hub/Play2

 arch/arm/dts/meson-gxbb-wetek-hub-u-boot.dtsi | 14 ++++++++
 ...tsi => meson-gxbb-wetek-play2-u-boot.dtsi} |  0
 board/amlogic/p200/p200.c                     | 35 +++++++++++--------
 configs/wetek-hub_defconfig                   |  1 +
 configs/wetek-play2_defconfig                 |  1 +
 5 files changed, 37 insertions(+), 14 deletions(-)
 create mode 100644 arch/arm/dts/meson-gxbb-wetek-hub-u-boot.dtsi
 rename arch/arm/dts/{meson-gxbb-wetek-u-boot.dtsi => meson-gxbb-wetek-play2-u-boot.dtsi} (100%)