diff mbox series

[PULL,36/36] hw/arm: Connect SPI Controller to BCM2835

Message ID 20240202153637.3710444-37-peter.maydell@linaro.org
State New
Headers show
Series [PULL,01/36] target/arm: fix exception syndrome for AArch32 bkpt insn | expand

Commit Message

Peter Maydell Feb. 2, 2024, 3:36 p.m. UTC 
From: Rayhan Faizel <rayhan.faizel@gmail.com>

This patch will allow the SPI controller to be accessible from BCM2835 based
boards as SPI0. SPI driver is usually disabled by default and config.txt does
not work.

Instead, dtmerge can be used to apply spi=on on a bcm2835 dtb file.

Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Message-id: 20240129221807.2983148-3-rayhan.faizel@gmail.com
[PMM: indent tweak]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/hw/arm/bcm2835_peripherals.h |  3 ++-
 hw/arm/bcm2835_peripherals.c         | 17 ++++++++++++++++-
 hw/arm/Kconfig                       |  1 +
 3 files changed, 19 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/include/hw/arm/bcm2835_peripherals.h b/include/hw/arm/bcm2835_peripherals.h
index d724a2fc28a..0203bb79d8c 100644
--- a/include/hw/arm/bcm2835_peripherals.h
+++ b/include/hw/arm/bcm2835_peripherals.h
@@ -31,6 +31,7 @@ 
 #include "hw/gpio/bcm2835_gpio.h"
 #include "hw/timer/bcm2835_systmr.h"
 #include "hw/usb/hcd-dwc2.h"
+#include "hw/ssi/bcm2835_spi.h"
 #include "hw/misc/unimp.h"
 #include "qom/object.h"
 
@@ -66,7 +67,7 @@  struct BCM2835PeripheralState {
     BCM2835GpioState gpio;
     Bcm2835ThermalState thermal;
     UnimplementedDeviceState i2s;
-    UnimplementedDeviceState spi[1];
+    BCM2835SPIState spi[1];
     UnimplementedDeviceState i2c[3];
     UnimplementedDeviceState otp;
     UnimplementedDeviceState dbus;
diff --git a/hw/arm/bcm2835_peripherals.c b/hw/arm/bcm2835_peripherals.c
index 0233038b957..d5573fd9545 100644
--- a/hw/arm/bcm2835_peripherals.c
+++ b/hw/arm/bcm2835_peripherals.c
@@ -144,6 +144,10 @@  static void bcm2835_peripherals_init(Object *obj)
     /* Power Management */
     object_initialize_child(obj, "powermgt", &s->powermgt,
                             TYPE_BCM2835_POWERMGT);
+
+    /* SPI */
+    object_initialize_child(obj, "bcm2835-spi0", &s->spi[0],
+                            TYPE_BCM2835_SPI);
 }
 
 static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp)
@@ -402,11 +406,22 @@  static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp)
     memory_region_add_subregion(&s->peri_mr, PM_OFFSET,
                 sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->powermgt), 0));
 
+    /* SPI */
+    if (!sysbus_realize(SYS_BUS_DEVICE(&s->spi[0]), errp)) {
+        return;
+    }
+
+    memory_region_add_subregion(&s->peri_mr, SPI0_OFFSET,
+                sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->spi[0]), 0));
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi[0]), 0,
+                       qdev_get_gpio_in_named(DEVICE(&s->ic),
+                                              BCM2835_IC_GPU_IRQ,
+                                              INTERRUPT_SPI));
+
     create_unimp(s, &s->txp, "bcm2835-txp", TXP_OFFSET, 0x1000);
     create_unimp(s, &s->armtmr, "bcm2835-sp804", ARMCTRL_TIMER0_1_OFFSET, 0x40);
     create_unimp(s, &s->i2s, "bcm2835-i2s", I2S_OFFSET, 0x100);
     create_unimp(s, &s->smi, "bcm2835-smi", SMI_OFFSET, 0x100);
-    create_unimp(s, &s->spi[0], "bcm2835-spi0", SPI0_OFFSET, 0x20);
     create_unimp(s, &s->bscsl, "bcm2835-spis", BSC_SL_OFFSET, 0x100);
     create_unimp(s, &s->i2c[0], "bcm2835-i2c0", BSC0_OFFSET, 0x20);
     create_unimp(s, &s->i2c[1], "bcm2835-i2c1", BSC1_OFFSET, 0x20);
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index db08a00a45b..980b14d58dc 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -429,6 +429,7 @@  config RASPI
     select PL011 # UART
     select SDHCI
     select USB_DWC2
+    select BCM2835_SPI
 
 config STM32F100_SOC
     bool