diff mbox series

[net-next,v2,7/7] arm64: dts: ls104xardb: set correct PHY interface mode

Message ID 1577096053-20507-8-git-send-email-madalin.bucur@oss.nxp.com
State Changes Requested
Delegated to: David Miller
Headers show
Series Add PHY connection types for XFI and SFI | expand

Commit Message

Madalin Bucur (OSS) Dec. 23, 2019, 10:14 a.m. UTC 
From: Madalin Bucur <madalin.bucur@nxp.com>

The DPAA 1 based LS1043ARDB and LS1046ARDB boards are using
XFI for the 10G interfaces. Since at the moment of the addition
of the first DPAA platforms the only 10G PHY interface type used
was XGMII, although the boards were actually using XFI, they were
wrongly declared as xgmii. This has propagated along the DPAA
family of SoCs, all 10G interfaces being declared wrongly as
XGMII. This patch addresses the problem for the ARM based DPAA
SoCs. After the introduction of XFI PHY interface type we can
address this issue.

Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
---
 arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts | 2 +-
 arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
index 4223a2352d45..8d99dd423720 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
@@ -139,7 +139,7 @@ 
 
 	ethernet@f0000 { /* 10GEC1 */
 		phy-handle = <&aqr105_phy>;
-		phy-connection-type = "xgmii";
+		phy-connection-type = "xfi";
 	};
 
 	mdio@fc000 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
index 0c742befb761..e193e2bc2b91 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
@@ -151,12 +151,12 @@ 
 
 	ethernet@f0000 { /* 10GEC1 */
 		phy-handle = <&aqr106_phy>;
-		phy-connection-type = "xgmii";
+		phy-connection-type = "xfi";
 	};
 
 	ethernet@f2000 { /* 10GEC2 */
 		fixed-link = <0 1 1000 0 0>;
-		phy-connection-type = "xgmii";
+		phy-connection-type = "xfi";
 	};
 
 	mdio@fc000 {