diff mbox

ARM: tegra: seaboard: enable internal LCD

Message ID 1353092114-18410-1-git-send-email-swarren@wwwdotorg.org
State Superseded, archived
Headers show

Commit Message

Stephen Warren Nov. 16, 2012, 6:55 p.m. UTC 
From: Stephen Warren <swarren@nvidia.com>

Enable host1x and add the rgb (LCD) output.

Also add the power sequence that controls the backlight and panel. The
sequence strictly follows the order and timings of the panel
specification.

Currently the backlight device controls both backlight and panel, this
needs to be fixed once the panel framework supports power sequences.

Based on (cut/paste) work for Ventana by Alexandre Courbot.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
---
 arch/arm/boot/dts/tegra20-seaboard.dts |  127 +++++++++++++++++++++++++++++++-
 1 file changed, 126 insertions(+), 1 deletion(-)

Comments

Alexandre Courbot Nov. 17, 2012, 3:18 a.m. UTC | #1 
On 11/17/2012 03:55 AM, Stephen Warren wrote:
> +	host1x {
> +		dc@54200000 {
> +			rgb {
> +				status = "okay";
> +				nvidia,ddc-i2c-bus = <&lcd_ddc>;
> +				backlight = <&backlight>;

I guess the remark Thierry made on my patch that the property should be 
"nvidia,backlight" (and that it will not be supported for 3.8 anyway) 
also applies here.

Alex.
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Thierry Reding Nov. 17, 2012, 7:30 a.m. UTC | #2 
On Sat, Nov 17, 2012 at 12:18:35PM +0900, Alex Courbot wrote:
> On 11/17/2012 03:55 AM, Stephen Warren wrote:
> >+	host1x {
> >+		dc@54200000 {
> >+			rgb {
> >+				status = "okay";
> >+				nvidia,ddc-i2c-bus = <&lcd_ddc>;
> >+				backlight = <&backlight>;
> 
> I guess the remark Thierry made on my patch that the property should
> be "nvidia,backlight" (and that it will not be supported for 3.8
> anyway) also applies here.

Yes, and the property should go into the rgb's display subnode.
Eventually this will need to be hooked up to the panel framework once
that's ready.

Thierry
diff mbox

Patch

diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts
index eafeca6..a999430 100644
--- a/arch/arm/boot/dts/tegra20-seaboard.dts
+++ b/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -10,6 +10,16 @@ 
 		reg = <0x00000000 0x40000000>;
 	};
 
+	host1x {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+				nvidia,ddc-i2c-bus = <&lcd_ddc>;
+				backlight = <&backlight>;
+			};
+		};
+	};
+
 	pinmux {
 		pinctrl-names = "default";
 		pinctrl-0 = <&state_default>;
@@ -351,7 +361,7 @@ 
 			#size-cells = <0>;
 		};
 
-		i2c@1 {
+		lcd_ddc: i2c@1 {
 			reg = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -600,6 +610,101 @@ 
 		};
 	};
 
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 16 32 48 64 80 96 112 128 144 160 176 192 208 224 240 255>;
+		default-brightness-level = <12>;
+
+		/* resources used by the power sequences */
+		pwms = <&pwm 2 5000000>;
+		pwm-names = "backlight";
+		power-supply = <&vdd_bl_reg>;
+		panel-supply = <&vdd_panel_reg>;
+
+		power-sequences {
+			power-on {
+				/*
+				 * Panel power and LVDS enable.
+				 * TODO: move into the panel device as soon as
+				 * panel framework supports power sequences.
+				 */
+				step0 {
+					type = "regulator";
+					id = "panel";
+					enable;
+				};
+				step1 {
+					/* LVDS_SHTDN* */
+					type = "gpio";
+					gpio = <&gpio 10 0>; /* GPIO PC6 */ 
+					value = <1>;
+				};
+				step2 {
+					type = "delay";
+					delay = <200000>;
+				};
+				/* Backlight sequence. This belongs here. */
+				step3 {
+					type = "regulator";
+					id = "power";
+					enable;
+				};
+				step4 {
+					type = "delay";
+					delay = <10000>;
+				};
+				step5 {
+					type = "pwm";
+					id = "backlight";
+					enable;
+				};
+				step6 {
+					/* LCD_BL_EN */
+					type = "gpio";
+					gpio = <&gpio 28 0>; /* GPIO PD4 */
+					value = <1>;
+				};
+			};
+
+			power-off {
+				step0 {
+					type = "gpio";
+					gpio = <&gpio 28 0>;
+					value = <0>;
+				};
+				step1 {
+					type = "pwm";
+					id = "backlight";
+					disable;
+				};
+				step2 {
+					type = "delay";
+					delay = <10000>;
+				};
+				step3 {
+					type = "regulator";
+					id = "power";
+					disable;
+				};
+				/* This also belongs to the panel sequence */
+				step4 {
+					type = "delay";
+					delay = <200000>;
+				};
+				step5 {
+					type = "gpio";
+					gpio = <&gpio 10 0>;
+					value = <0>;
+				};
+				step6 {
+					type = "regulator";
+					id = "panel";
+					disable;
+				};
+			};
+		};
+	};
+
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -632,6 +737,26 @@ 
 			gpio = <&pmic 1 0>;
 			enable-active-high;
 		};
+
+		vdd_panel_reg: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "vdd_pnl";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpio 22 0>; /* gpio PC6 */
+			enable-active-high;
+		};
+
+		vdd_bl_reg: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "vdd_bl";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpio 176 0>; /* gpio PW0 */
+			enable-active-high;
+		};
 	};
 
 	sound {