| Message ID | 20240202001733.91455-3-dharma.b@microchip.com |
|---|---|
| State | Accepted |
| Headers | show |
| Series | Convert Microchip's HLCDC Text based DT bindings to JSON schema | expand |
Hello, On Fri, Feb 02, 2024 at 05:47:32AM +0530, Dharma Balasubiramani wrote: > Convert device tree bindings for Atmel's HLCDC PWM controller to YAML > format. > > Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com> > Reviewed-by: Conor Dooley <conor.dooley@microchip.com> > --- > Changelog > v5 -> v6 > - Drop the example as we have one complete example in mfd binding. > v4 -> v5 > v3 -> v4 > - No changes > Note: The clean up patch will be sent later as Sam suggested. > v2 -> v3 > - Remove '|' in description, as there is no formatting to preserve. > - Delete the description for pwm-cells. > - Drop the label for pwm node as it not used. > v1 -> v2 > - Remove the explicit copyrights. > - Modify title (not include words like binding/driver). > - Modify description actually describing the hardware and not the driver. > - Remove pinctrl properties which aren't required. > - Drop parent node and it's other sub-device node which are not related here. > --- > .../bindings/pwm/atmel,hlcdc-pwm.yaml | 35 +++++++++++++++++++ > .../bindings/pwm/atmel-hlcdc-pwm.txt | 29 --------------- > 2 files changed, 35 insertions(+), 29 deletions(-) > create mode 100644 Documentation/devicetree/bindings/pwm/atmel,hlcdc-pwm.yaml > delete mode 100644 Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.txt > > diff --git a/Documentation/devicetree/bindings/pwm/atmel,hlcdc-pwm.yaml b/Documentation/devicetree/bindings/pwm/atmel,hlcdc-pwm.yaml > new file mode 100644 > index 000000000000..0e92868a2b68 > --- /dev/null > +++ b/Documentation/devicetree/bindings/pwm/atmel,hlcdc-pwm.yaml > @@ -0,0 +1,35 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/pwm/atmel,hlcdc-pwm.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Atmel's HLCDC's PWM controller > + > +maintainers: > + - Nicolas Ferre <nicolas.ferre@microchip.com> > + - Alexandre Belloni <alexandre.belloni@bootlin.com> > + - Claudiu Beznea <claudiu.beznea@tuxon.dev> > + > +description: > + The LCDC integrates a Pulse Width Modulation (PWM) Controller. This block > + generates the LCD contrast control signal (LCD_PWM) that controls the > + display's contrast by software. LCDC_PWM is an 8-bit PWM signal that can be > + converted to an analog voltage with a simple passive filter. LCD display > + panels have different backlight specifications in terms of minimum/maximum > + values for PWM frequency. If the LCDC PWM frequency range does not match the > + LCD display panel, it is possible to use the standalone PWM Controller to > + drive the backlight. > + > +properties: > + compatible: > + const: atmel,hlcdc-pwm > + > + "#pwm-cells": > + const: 3 > + > +required: > + - compatible > + - "#pwm-cells" > + > +additionalProperties: false > diff --git a/Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.txt b/Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.txt > deleted file mode 100644 > index afa501bf7f94..000000000000 > --- a/Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.txt > +++ /dev/null > @@ -1,29 +0,0 @@ > -Device-Tree bindings for Atmel's HLCDC (High-end LCD Controller) PWM driver > - > -The Atmel HLCDC PWM is subdevice of the HLCDC MFD device. > -See ../mfd/atmel-hlcdc.txt for more details. > - > -Required properties: > - - compatible: value should be one of the following: > - "atmel,hlcdc-pwm" > - - pinctr-names: the pin control state names. Should contain "default". > - - pinctrl-0: should contain the pinctrl states described by pinctrl > - default. > - - #pwm-cells: should be set to 3. This PWM chip use the default 3 cells > - bindings defined in pwm.yaml in this directory. > - > -Example: > - > - hlcdc: hlcdc@f0030000 { > - compatible = "atmel,sama5d3-hlcdc"; > - reg = <0xf0030000 0x2000>; > - clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; > - clock-names = "periph_clk","sys_clk", "slow_clk"; > - > - hlcdc_pwm: hlcdc-pwm { > - compatible = "atmel,hlcdc-pwm"; > - pinctrl-names = "default"; > - pinctrl-0 = <&pinctrl_lcd_pwm>; > - #pwm-cells = <3>; > - }; > - }; I guess dropping the example is fine because it's included now in the mfd binding. Applied to https://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux.git pwm/for-next Best regards Uwe
diff --git a/Documentation/devicetree/bindings/pwm/atmel,hlcdc-pwm.yaml b/Documentation/devicetree/bindings/pwm/atmel,hlcdc-pwm.yaml new file mode 100644 index 000000000000..0e92868a2b68 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/atmel,hlcdc-pwm.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/atmel,hlcdc-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel's HLCDC's PWM controller + +maintainers: + - Nicolas Ferre <nicolas.ferre@microchip.com> + - Alexandre Belloni <alexandre.belloni@bootlin.com> + - Claudiu Beznea <claudiu.beznea@tuxon.dev> + +description: + The LCDC integrates a Pulse Width Modulation (PWM) Controller. This block + generates the LCD contrast control signal (LCD_PWM) that controls the + display's contrast by software. LCDC_PWM is an 8-bit PWM signal that can be + converted to an analog voltage with a simple passive filter. LCD display + panels have different backlight specifications in terms of minimum/maximum + values for PWM frequency. If the LCDC PWM frequency range does not match the + LCD display panel, it is possible to use the standalone PWM Controller to + drive the backlight. + +properties: + compatible: + const: atmel,hlcdc-pwm + + "#pwm-cells": + const: 3 + +required: + - compatible + - "#pwm-cells" + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.txt b/Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.txt deleted file mode 100644 index afa501bf7f94..000000000000 --- a/Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.txt +++ /dev/null @@ -1,29 +0,0 @@ -Device-Tree bindings for Atmel's HLCDC (High-end LCD Controller) PWM driver - -The Atmel HLCDC PWM is subdevice of the HLCDC MFD device. -See ../mfd/atmel-hlcdc.txt for more details. - -Required properties: - - compatible: value should be one of the following: - "atmel,hlcdc-pwm" - - pinctr-names: the pin control state names. Should contain "default". - - pinctrl-0: should contain the pinctrl states described by pinctrl - default. - - #pwm-cells: should be set to 3. This PWM chip use the default 3 cells - bindings defined in pwm.yaml in this directory. - -Example: - - hlcdc: hlcdc@f0030000 { - compatible = "atmel,sama5d3-hlcdc"; - reg = <0xf0030000 0x2000>; - clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; - clock-names = "periph_clk","sys_clk", "slow_clk"; - - hlcdc_pwm: hlcdc-pwm { - compatible = "atmel,hlcdc-pwm"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd_pwm>; - #pwm-cells = <3>; - }; - };