diff mbox

[v4,4/5] mtd: nand: Rename OMAP NAND driver

Message ID 20140922184909.GS1193@ld-irv-0074
State RFC
Headers show

Commit Message

Brian Norris Sept. 22, 2014, 6:49 p.m. UTC
On Sat, Sep 20, 2014 at 05:53:15PM +0100, Ezequiel Garcia wrote:
> Rename it to a less generic name, so the module is built with a meaningful
> name instead of the previous 'omap2.ko'.

You mention renaming only so that you can change the module name, but
you also (partly at my prompting) argued for future merging of omap_nand
and omap_elm into a single module. So it seems like you might have to do
several renamings, in that case, right?

omap2.c => omap_nand.c (this patch)

omap_nand.c => <somethingelse>.c (later)
 ...so you can link somethingelse.o and omap_elm.o into omap_nand.{o,ko}

If I'm right here, then maybe (rather than multiple renames), you just
want this patch for now? (untested)


> Acked-by: Roger Quadros <rogerq@ti.com>
> Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
> ---
>  drivers/mtd/nand/Makefile                  | 2 +-
>  drivers/mtd/nand/{omap2.c => omap2_nand.c} | 0
>  2 files changed, 1 insertion(+), 1 deletion(-)
>  rename drivers/mtd/nand/{omap2.c => omap2_nand.c} (100%)

[snip]

Brian
diff mbox

Patch

diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index b3237b742eb5..1a4d5e9db75b 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -26,7 +26,7 @@  obj-$(CONFIG_MTD_NAND_CS553X)		+= cs553x_nand.o
 obj-$(CONFIG_MTD_NAND_NDFC)		+= ndfc.o
 obj-$(CONFIG_MTD_NAND_ATMEL)		+= atmel_nand.o
 obj-$(CONFIG_MTD_NAND_GPIO)		+= gpio.o
-obj-$(CONFIG_MTD_NAND_OMAP2) 		+= omap2.o
+obj-$(CONFIG_MTD_NAND_OMAP2) 		+= omap_nand.o
 obj-$(CONFIG_MTD_NAND_OMAP_BCH)		+= omap_elm.o
 obj-$(CONFIG_MTD_NAND_CM_X270)		+= cmx270_nand.o
 obj-$(CONFIG_MTD_NAND_PXA3xx)		+= pxa3xx_nand.o
@@ -52,3 +52,4 @@  obj-$(CONFIG_MTD_NAND_XWAY)		+= xway_nand.o
 obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH)	+= bcm47xxnflash/
 
 nand-objs := nand_base.o nand_bbt.o nand_timings.o
+omap_nand-objs := omap2.o