Show patches with: Submitter = Huang Shijie       |   490 patches
« 1 2 3 4 … 4 5 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
ARM: dts: imx28: add the `clock-names` for gpmi-nand - - - - --- 2012-10-10 Huang Shijie Not Applicable
ARM: dts: mxs: add the "clock-names" for gpmi-nand - - 1 - --- 2012-10-10 Huang Shijie Not Applicable
ARM: dts: mxs: add the `clock-names` for gpmi-nand - - - - --- 2012-10-10 Huang Shijie Not Applicable
Documentation: mtd: update the document for m25p80 1 - - - --- 2014-04-23 Huang Shijie Accepted
GPMI-NAND Status? - - - - --- 2011-08-09 Huang Shijie New
GPMI-NAND Status? - - - - --- 2011-08-08 Huang Shijie New
MTD/GPMI : select more modules for GPMI by default - - - - --- 2011-12-30 Huang Shijie New
MTD/GPMI bugfix : reset the BCH module when it is not MX23 - - - - --- 2011-12-30 Huang Shijie New
Using GPMI-NAND driver on iMX28 using 3.4-rc1? - - - - --- 2012-04-06 Huang Shijie New
[01/10] MXS-DMA : move the mxs-dma.h to a more common place - - - - --- 2012-01-19 Huang Shijie New
[01/10] mtd: set the cell information for ONFI nand - - - - --- 2013-08-12 Huang Shijie New
[01/11] mtd: add datasheet's ECC information to nand_chip{} - - - - --- 2013-03-18 Huang Shijie New
[02/10] MXS-DMA : change the header - - - - --- 2012-01-19 Huang Shijie New
[02/10] mtd: add a helper to check the SLC/MLC nand chip - - - - --- 2013-08-12 Huang Shijie Accepted
[02/11] mtd: increase max OOB size to 744 - - - - --- 2013-03-18 Huang Shijie Accepted
[03/10] MXS-MMC : change the DMA header file - - - - --- 2012-01-19 Huang Shijie New
[03/10] mtd: print out the cell information for nand chip - - - - --- 2013-08-12 Huang Shijie New
[03/11] mtd: get the ECC info from the parameter page for ONFI nand - - - - --- 2013-03-18 Huang Shijie New
[04/10] MTD/GPMI : change the DMA header file - - - - --- 2012-01-19 Huang Shijie New
[04/10] mtd: gpmi: rewrite the gpmi_ecc_write_oob() to support the jffs2 - - - - --- 2013-08-12 Huang Shijie New
[04/11] mtd: add data structures for Extended Parameter Page - - - - --- 2013-03-18 Huang Shijie New
[05/10] ASoc : change the DMA header file - - - - --- 2012-01-19 Huang Shijie New
[05/10] mtd: add more comment for MTD_NANDFLASH/MTD_MLCNANDFLASH - - - - --- 2013-08-12 Huang Shijie New
[05/11] mtd: add a helper to get the supported features for ONFI nand - - - - --- 2013-03-18 Huang Shijie New
[06/10] MXS-DMA : add more flags for MXS-DMA - - - - --- 2012-01-19 Huang Shijie New
[06/10] mtd: fix the wrong mtd->type for nand chip - - - - --- 2013-08-12 Huang Shijie Accepted
[06/11] mtd: get the ECC info from the Extended Parameter Page - - - - --- 2013-03-18 Huang Shijie New
[07/10] MXS-DMA : change the last parameter of mxs_dma_prep_slave_sg() - - - - --- 2012-01-19 Huang Shijie New
[07/10] jffs2: init the ret with -EINVAL - - - - --- 2013-08-12 Huang Shijie New
[07/11] mtd: replace the hardcode with the onfi_get_feature() - - - - --- 2013-03-18 Huang Shijie New
[08/10] MXS-MMC : use the new DMA flags - - - - --- 2012-01-19 Huang Shijie New
[08/10] mtd: add MTD_MLCNANDFLASH case for mtd_type_show() - - - - --- 2013-08-12 Huang Shijie New
[08/11] mtd: add a new field for ecc info in the nand_flash_dev{} - - - - --- 2013-03-18 Huang Shijie New
[09/10] MTD/GPMI : add a new field `gpmi_version` - - - - --- 2012-01-19 Huang Shijie New
[09/10] mtd: add more information for the MTD_NANDFLASH case - - - - --- 2013-08-12 Huang Shijie New
[09/11] mtd: parse out the ECC info for the full-id nand chips - - - - --- 2013-03-18 Huang Shijie New
[1/2] ARM: mxs: add GPMI support for imx23/imx28 - - - - --- 2011-04-15 Huang Shijie Not Applicable
[1/2] mtd: add helpers to set/get features for ONFI nand - - - - --- 2012-09-10 Huang Shijie New
[1/2] mtd: gpmi: add device tree support to gpmi-nand - - - - --- 2012-05-04 Huang Shijie New
[1/2] mtd: gpmi: add on-flash BBT support for gpmi nand - - - - --- 2012-07-03 Huang Shijie Accepted
[1/2] mtd: gpmi: fix the NULL pointer - - - 1 --- 2013-11-07 Huang Shijie Superseded
[1/2] mtd: gpmi: set the Golois Field bit for mx6q's BCH - - - - --- 2013-01-25 Huang Shijie Accepted
[1/2] mtd: print out the partition's read-only flag - - - - --- 2014-04-30 Huang Shijie Rejected
[1/2] mtd: remove the de-select chip code in nand_release_device() - - - - --- 2012-11-19 Huang Shijie Accepted
[1/2] mtd: replace the hard code with the proper macro 1 - - - --- 2012-07-03 Huang Shijie Accepted
[1/2] mtd: torturetest: rewrite the erase-write-verify process into one block unit. - - - - --- 2013-02-05 Huang Shijie New
[1/3] ARM: mx6q-arm2: add gpmi-nand dt support - - - - --- 2012-04-20 Huang Shijie Not Applicable
[1/3] mtd: nand: add "page" argument for read_subpage hook - - - - --- 2014-01-03 Huang Shijie Accepted
[1/4] mtd: add a new field to mtd_info{} - - - - --- 2013-05-03 Huang Shijie New
[1/4] mtd: gpmi: decouple the chip select from the DMA channel - - - - --- 2013-06-14 Huang Shijie Accepted
[1/4] mtd: spi-nor: move the SPI NOR commands to a new header file - - - - --- 2013-11-26 Huang Shijie New
[1/5] mtd: nand: add the data structures for JEDEC parameter page - - - - --- 2013-12-27 Huang Shijie New
[1/7] ARM: add GPMI support for imx23/imx28 - - - - --- 2011-03-16 Huang Shijie Not Applicable
[1/8] mtd: gpmi: do not use the local array to do the DMA transfer - - - - --- 2013-11-14 Huang Shijie Accepted
[1/9] mtd: add helpers to set/get features for ONFI nand - - - - --- 2012-09-11 Huang Shijie Accepted
[10/10] MTD/GPMI : change the code for new DMA interface - - - - --- 2012-01-19 Huang Shijie New
[10/10] mtd: add a helper to detect the nand type - - - - --- 2013-08-12 Huang Shijie Accepted
[10/11] mtd: add the ecc info for some full-id nand chips - - - - --- 2013-03-18 Huang Shijie New
[11/11] mtd: gpmi: set the BCH's geometry with the ecc info - - - - --- 2013-03-18 Huang Shijie New
[2/2] ARM: mxs: add GPMI device for imx23/imx28 - - - - --- 2011-04-15 Huang Shijie Not Applicable
[2/2] mtd: add helpers to get the supportted ONFI timing mode - - - - --- 2012-09-10 Huang Shijie New
[2/2] mtd: fix the comment - - - - --- 2012-07-03 Huang Shijie Accepted
[2/2] mtd: gpmi: add gpmi support for mx6q - - - - --- 2012-05-04 Huang Shijie Accepted
[2/2] mtd: gpmi: add sanity check for the ECC strength - - - - --- 2013-01-25 Huang Shijie New
[2/2] mtd: gpmi: only scan two chips for imx6 - - - - --- 2013-11-07 Huang Shijie Accepted
[2/2] mtd: gpmi: update the bitflip_threshold - - - - --- 2012-07-03 Huang Shijie Accepted
[2/2] mtd: remove the "chip" parameter in nand_get_device() - - - - --- 2012-11-19 Huang Shijie Accepted
[2/2] mtd: show the partition's flags in the the /proc/mtd - - - - --- 2014-04-30 Huang Shijie Rejected
[2/2] mtd: torturetest: add the support for random data pattern - - - - --- 2013-02-05 Huang Shijie New
[2/3] ARM: mx28evk: add gpmi-nand dt support - - - - --- 2012-04-20 Huang Shijie Not Applicable
[2/3] mtd: gpmi: do not use the mtd->writesize - - - - --- 2014-01-03 Huang Shijie Accepted
[2/4] mtd: add a new sys node to show the ecc step size - - - - --- 2013-05-03 Huang Shijie New
[2/4] mtd: gpmi: use DMA channel 0 for all the nand chips - - - - --- 2013-06-14 Huang Shijie Accepted
[2/4] mtd: spi-nor: add a new data structrue spi_nor{} - - - - --- 2013-11-26 Huang Shijie New
[2/5] mtd: nand: add fields for JEDEC in nand_chip - - - - --- 2013-12-27 Huang Shijie New
[2/7] add the common code for GPMI driver - - - - --- 2011-03-16 Huang Shijie Superseded
[2/8] mtd: gpmi: delete the gpmi_pre_bbt_scan - - - - --- 2013-11-14 Huang Shijie Accepted
[2/9] mtd: add helpers to get the supportted ONFI timing mode - - - - --- 2012-09-11 Huang Shijie Accepted
[3/3] mtd: gpmi: add device tree support for mx6q-arm2 and mx28evk - - - - --- 2012-04-20 Huang Shijie New
[3/3] mtd: gpmi: add subpage read support - - - - --- 2014-01-03 Huang Shijie Accepted
[3/4] mtd: gpmi: scan two nand chips - - - - --- 2013-06-14 Huang Shijie New
[3/4] mtd: set the ecc step size for master/slave mtd_info - - - - --- 2013-05-03 Huang Shijie New
[3/4] mtd: spi-nor: add the framework for SPI NOR - - - - --- 2013-11-26 Huang Shijie New
[3/5] mtd: nand: add a helper to get the supported features for JEDEC - - - - --- 2013-12-27 Huang Shijie New
[3/7] add the database for the NANDs - - - - --- 2011-03-16 Huang Shijie Superseded
[3/8] mtd: gpmi: remove the unused line - - - - --- 2013-11-14 Huang Shijie Accepted
[3/9] mtd: gpmi: add a new field for HW_GPMI_TIMING1 - - - - --- 2012-09-11 Huang Shijie New
[4/4] mtd: gpmi: imx6: fix the wrong method for checking ready/busy - - - - --- 2013-06-14 Huang Shijie New
[4/4] mtd: gpmi: update the ecc step size for mtd_info{} - - - - --- 2013-05-03 Huang Shijie New
[4/4] mtd: m25p80: use the new spi-nor APIs - - - - --- 2013-11-26 Huang Shijie New
[4/5,fix] mtd: nand: parse out the JEDEC compliant nand - - - - --- 2013-12-27 Huang Shijie Superseded
[4/5] mtd: nand: parse out the JEDEC compliant nand - - - - --- 2013-12-27 Huang Shijie Superseded
[4/7] add GPMI support for imx23 - - - - --- 2011-03-16 Huang Shijie Superseded
[4/8] mtd: gpmi: rename the functions from gpmi_nfc_* to gpmi_nand_* - - - - --- 2013-11-14 Huang Shijie Accepted
[4/9] mtd: gpmi: do not get the clock frequency in gpmi_begin() - - - - --- 2012-09-11 Huang Shijie New
[5/5] mtd: nand: print out the right information for JEDEC compliant nand - - - - --- 2013-12-27 Huang Shijie Accepted
[5/7] add GPMI support for imx28 - - - - --- 2011-03-16 Huang Shijie Superseded
[5/8] mtd: gpmi: use devm_ioremap_resource - - - - --- 2013-11-14 Huang Shijie Accepted
[5/9] mtd: gpmi: add a new field for HW_GPMI_CTRL1 - - - - --- 2012-09-11 Huang Shijie New
[6/7] dmaengine: change the flags of request_irq() - - - - --- 2011-03-16 Huang Shijie Superseded
« 1 2 3 4 … 4 5 »