Message ID | 1363605534-24776-9-git-send-email-b32955@freescale.com |
---|---|
State | New, archived |
Headers | show |
On Mon, 2013-03-18 at 19:18 +0800, Huang Shijie wrote: > +#define ECC_INFO(strength, size) (((strength) << 16) | (size)) > +#define ECC_STRENGTH(x) (((x) >> 16) & 0xffff) > +#define ECC_SIZE(x) ((x) & 0xffff) > + uint32_t ecc_info; > }; Could you please avoid putting macro definition in the middle of the structure. Put it before the structure. Also, probably prefixing with NAND_ would make sense?
于 2013年04月16日 22:56, Artem Bityutskiy 写道: > On Mon, 2013-03-18 at 19:18 +0800, Huang Shijie wrote: >> +#define ECC_INFO(strength, size) (((strength)<< 16) | (size)) >> +#define ECC_STRENGTH(x) (((x)>> 16)& 0xffff) >> +#define ECC_SIZE(x) ((x)& 0xffff) >> + uint32_t ecc_info; >> }; > Could you please avoid putting macro definition in the middle of the > structure. Put it before the structure. > > Also, probably prefixing with NAND_ would make sense? got it. thanks Huang Shijie
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 2c5a2e0..2837bc6 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -633,6 +633,11 @@ struct nand_chip { * @options: stores various chip bit options * @id_len: The valid length of the @id. * @oobsize: OOB size + * @ecc_info: The ECC information. + * lower 16 bits: store the ECC bits. + * upper 16 bits: store the ECC data chunk size. + * For example, the "4bit ECC for each 512Byte" can be set with + * ECC_INFO(4, 512) macro. */ struct nand_flash_dev { char *name; @@ -649,6 +654,11 @@ struct nand_flash_dev { unsigned int options; uint16_t id_len; uint16_t oobsize; + +#define ECC_INFO(strength, size) (((strength) << 16) | (size)) +#define ECC_STRENGTH(x) (((x) >> 16) & 0xffff) +#define ECC_SIZE(x) ((x) & 0xffff) + uint32_t ecc_info; }; /**
Add the @ecc_info in the nand_flash_dev{}. The lower 16 bits are used to store the ECC bits, while the upper 16 bits are used to store the ECC data chunk size. Signed-off-by: Huang Shijie <b32955@freescale.com> --- include/linux/mtd/nand.h | 10 ++++++++++ 1 files changed, 10 insertions(+), 0 deletions(-)