Show patches with: State = Action Required       |    Archived = No       |   393 patches
« 1 2 3 4 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[GIT,PULL] at24 updates for v7.0-rc1 [GIT,PULL] at24 updates for v7.0-rc1 - - - - --- 2026-01-21 Bartosz Golaszewski New
[V3] i2c: imx-lpi2c: fix SMBus block read NACK after byte count [V3] i2c: imx-lpi2c: fix SMBus block read NACK after byte count - 1 1 - --- 2026-01-21 Carlos Song New
[v2,4/4] i2c: Add SMBus ARP target mode test driver i2c: SMBus ARP support - - - - --- 2026-01-21 Heikki Krogerus New
[v2,3/4] mctp i2c: Enable SMBus ARP discovery i2c: SMBus ARP support - - - - --- 2026-01-21 Heikki Krogerus New
[v2,2/4] i2c: Sysfs attribute files for the Unique Device Identifier fields i2c: SMBus ARP support - - - - --- 2026-01-21 Heikki Krogerus New
[v2,1/4] i2c: SMBus Address Resolution Protocol implementation for host side i2c: SMBus ARP support - - - - --- 2026-01-21 Heikki Krogerus New
[v6,7/7] mmc: host: renesas_sdhi_core: support selecting an optional mux mmc: host: renesas_sdhi_core: support configuring an optional sdio mux - - 1 - --- 2026-01-21 Josua Mayer New
[v6,6/7] dt-bindings: mmc: renesas,sdhi: Add mux-states property mmc: host: renesas_sdhi_core: support configuring an optional sdio mux 1 - - - --- 2026-01-21 Josua Mayer New
[v6,5/7] i2c: omap: switch to new generic helper for getting selected mux-state mmc: host: renesas_sdhi_core: support configuring an optional sdio mux - - 1 - --- 2026-01-21 Josua Mayer New
[v6,4/7] phy: can-transceiver: drop temporary helper getting optional mux-state mmc: host: renesas_sdhi_core: support configuring an optional sdio mux 1 - 1 - --- 2026-01-21 Josua Mayer New
[v6,3/7] mux: add help text for MULTIPLEXER config option mmc: host: renesas_sdhi_core: support configuring an optional sdio mux - - - - --- 2026-01-21 Josua Mayer New
[v6,2/7] mux: Add helper functions for getting optional and selected mux-state mmc: host: renesas_sdhi_core: support configuring an optional sdio mux - - - - --- 2026-01-21 Josua Mayer New
[v6,1/7] phy: can-transceiver: rename temporary helper function to avoid conflict mmc: host: renesas_sdhi_core: support configuring an optional sdio mux 1 - 1 - --- 2026-01-21 Josua Mayer New
i2c: add sanity check for input SMBus data length i2c: add sanity check for input SMBus data length - - - - --- 2026-01-20 Edward Adam Davis New
[v3,4/4] i2c: designware: Remove an unnecessary condition i2c: designware: Enable mode swapping 1 - 1 - --- 2026-01-20 Heikki Krogerus New
[v3,3/4] i2c: designware: Enable mode swapping i2c: designware: Enable mode swapping 1 - - - --- 2026-01-20 Heikki Krogerus New
[v3,2/4] i2c: designware: Combine the init functions i2c: designware: Enable mode swapping 1 - 1 - --- 2026-01-20 Heikki Krogerus New
[v3,1/4] i2c: designware: Combine some of the common functions i2c: designware: Enable mode swapping 1 - - - --- 2026-01-20 Heikki Krogerus New
[v5,6/6] i2c: designware: Support of controller with IC_EMPTYFIFO_HOLD_MASTER disabled i2c: designware: Improve support of multi-messages transfer - - - - --- 2026-01-20 Benoît Monin New
[v5,5/6] i2c: designware: Use runtime PM macro for auto-cleanup i2c: designware: Improve support of multi-messages transfer - - 1 - --- 2026-01-20 Benoît Monin New
[v5,4/6] i2c: designware: Implement I2C_M_STOP support i2c: designware: Improve support of multi-messages transfer - - - - --- 2026-01-20 Benoît Monin New
[v5,3/6] i2c: designware: Add dedicated algorithm for AMD NAVI i2c: designware: Improve support of multi-messages transfer - - 1 - --- 2026-01-20 Benoît Monin New
[v5,2/6] i2c: designware: Sort compatible strings in alphabetical order i2c: designware: Improve support of multi-messages transfer - - 1 - --- 2026-01-20 Benoît Monin New
[v5,1/6] i2c: designware: Optimize flag reading in i2c_dw_read() i2c: designware: Improve support of multi-messages transfer - - 1 - --- 2026-01-20 Benoît Monin New
[v8,4/4] i2c: tegra: Add support for Tegra410 Add I2C support for Tegra410 - - - - --- 2026-01-20 Kartik Rajput New
[v8,3/4] i2c: tegra: Add logic to support different register offsets Add I2C support for Tegra410 - - - - --- 2026-01-20 Kartik Rajput New
[v8,2/4] i2c: tegra: Move variant to tegra_i2c_hw_feature Add I2C support for Tegra410 - - - - --- 2026-01-20 Kartik Rajput New
[v8,1/4] i2c: tegra: Introduce tegra_i2c_variant to identify DVC and VI Add I2C support for Tegra410 - - - - --- 2026-01-20 Kartik Rajput New
[v5,7/7] mmc: host: renesas_sdhi_core: support selecting an optional mux mmc: host: renesas_sdhi_core: support configuring an optional sdio mux - - 1 - --- 2026-01-18 Josua Mayer New
[v5,6/7] dt-bindings: mmc: renesas,sdhi: Add mux-states property mmc: host: renesas_sdhi_core: support configuring an optional sdio mux 1 - - - --- 2026-01-18 Josua Mayer New
[v5,5/7] i2c: omap: switch to new generic helper for getting selected mux-state mmc: host: renesas_sdhi_core: support configuring an optional sdio mux - - - - --- 2026-01-18 Josua Mayer New
[v5,4/7] phy: can-transceiver: drop temporary helper getting optional mux-state mmc: host: renesas_sdhi_core: support configuring an optional sdio mux 1 - 1 - --- 2026-01-18 Josua Mayer New
[v5,3/7] mux: add help text for MULTIPLEXER config option mmc: host: renesas_sdhi_core: support configuring an optional sdio mux - - - - --- 2026-01-18 Josua Mayer New
[v5,2/7] mux: Add helper functions for getting optional and selected mux-state mmc: host: renesas_sdhi_core: support configuring an optional sdio mux - - - - --- 2026-01-18 Josua Mayer New
[v5,1/7] phy: can-transceiver: rename temporary helper function to avoid conflict mmc: host: renesas_sdhi_core: support configuring an optional sdio mux 1 - 1 - --- 2026-01-18 Josua Mayer New
[PULL,REQUEST] i2c-for-6.19-rc6 [PULL,REQUEST] i2c-for-6.19-rc6 - - - - --- 2026-01-18 Wolfram Sang New
[4/4] arm64: dts: qcom: milos-fairphone-fp6: Add camera EEPROMs on CCI busses Add CCI support for Milos, enable on Fairphone (Gen. 6) - - 1 - --- 2026-01-16 Luca Weiss New
[3/4] arm64: dts: qcom: milos: Add CCI busses Add CCI support for Milos, enable on Fairphone (Gen. 6) - - - - --- 2026-01-16 Luca Weiss New
[2/4] dt-bindings: i2c: qcom-cci: Document Milos compatible Add CCI support for Milos, enable on Fairphone (Gen. 6) - - - - --- 2026-01-16 Luca Weiss New
[1/4] dt-bindings: eeprom: at24: Add compatible for Puya P24C128F Add CCI support for Milos, enable on Fairphone (Gen. 6) - - 1 - --- 2026-01-16 Luca Weiss New
[V3,2/2] i2c: imx: add abort path for invalid block length i2c: imx: Fix block read handling for invalid length - - - - --- 2026-01-16 LI Qingwu New
[V3,1/2] i2c: imx: preserve error state in block data length handler i2c: imx: Fix block read handling for invalid length - - - - --- 2026-01-16 LI Qingwu New
[v2] i2c: Add FTDI FT4222H USB I2C adapter [v2] i2c: Add FTDI FT4222H USB I2C adapter - - - - --- 2026-01-16 Francesco Lavra New
[V2,2/2] i2c: imx: add abort path for invalid block length i2c: imx: Fix block read handling for invalid length - - - - --- 2026-01-16 LI Qingwu New
[V2,1/2] i2c: imx: preserve error state in block data length handler i2c: imx: Fix block read handling for invalid length - - - - --- 2026-01-16 LI Qingwu New
[4/4] riscv: dts: andes: qilai: add I2C controller Add I2C support for QiLai SoC - - - - --- 2026-01-15 Ben Zong-You Xie New
[3/4] MAINTAINERS: add an entry for Andes I2C driver Add I2C support for QiLai SoC - - - - --- 2026-01-15 Ben Zong-You Xie New
[2/4] drivers: i2c: add the driver for Andes I2C controller Add I2C support for QiLai SoC - - - - --- 2026-01-15 Ben Zong-You Xie New
[1/4] dt-bindings: i2c: add support for Andes I2C controller Add I2C support for QiLai SoC - - - - --- 2026-01-15 Ben Zong-You Xie New
[v3,5/5] arm64: dts: qcom: talos-evk-camera: Add DT overlay Add CCI and imx577 sensor support for Talos evk - - 1 - --- 2026-01-15 Wenmeng Liu cazzacarna Under Review
[v3,4/5] arm64: dts: qcom: talos: Add camera MCLK pinctrl Add CCI and imx577 sensor support for Talos evk - - 3 - --- 2026-01-15 Wenmeng Liu cazzacarna Under Review
[v3,3/5] arm64: dts: qcom: talos: Add CCI definitions Add CCI and imx577 sensor support for Talos evk - - 1 - --- 2026-01-15 Wenmeng Liu cazzacarna Under Review
[v3,2/5] dt-bindings: i2c: qcom-cci: Document sm6150 compatible Add CCI and imx577 sensor support for Talos evk - - 1 - --- 2026-01-15 Wenmeng Liu cazzacarna Under Review
[v3,1/5] arm64: dts: qcom: talos: Add camss node Add CCI and imx577 sensor support for Talos evk - - 2 - --- 2026-01-15 Wenmeng Liu cazzacarna Under Review
[v1,2/2] dt-bindings: i2c: add force-set-sda property i2c: add support for forced SDA recovery - - - - --- 2026-01-14 李杰 wsa New
[v1,1/2] i2c: core: add "force-set-sda" flag for open-drain SDA without "FLAG_IS_OUT" bit i2c: add support for forced SDA recovery - - - - --- 2026-01-14 李杰 wsa New
[v1,2/2] i2c: designware: Use device_is_compatible() instead of custom approach i2c: designware: Clean up MODEL_* definitions - - - - --- 2026-01-14 Andy Shevchenko cazzacarna Under Review
[v7,4/4] i2c: tegra: Add support for Tegra410 Add I2C support for Tegra410 - - - - --- 2026-01-13 Kartik Rajput cazzacarna Under Review
[v7,3/4] i2c: tegra: Add logic to support different register offsets Add I2C support for Tegra410 - - - - --- 2026-01-13 Kartik Rajput cazzacarna Under Review
[v7,2/4] i2c: tegra: Move variant to tegra_i2c_hw_feature Add I2C support for Tegra410 - - - - --- 2026-01-13 Kartik Rajput cazzacarna Under Review
[v7,1/4] i2c: tegra: Introduce tegra_i2c_variant to identify DVC and VI Add I2C support for Tegra410 - - - - --- 2026-01-13 Kartik Rajput cazzacarna Under Review
[v1,4/4] i2c: Add SMBus ARP target mode test driver i2c: SMBus ARP support - - - - --- 2026-01-13 Heikki Krogerus wsa New
[v1,3/4] mctp i2c: Enable SMBus ARP discovery i2c: SMBus ARP support - - - - --- 2026-01-13 Heikki Krogerus wsa New
[v1,2/4] i2c: Sysfs attribute files for the Unique Device Identifier fields i2c: SMBus ARP support - - - - --- 2026-01-13 Heikki Krogerus wsa New
[v1,1/4] i2c: SMBus Address Resolution Protocol implementation for host side i2c: SMBus ARP support - - - - --- 2026-01-13 Heikki Krogerus wsa New
[v3,12/12] i2c: qcom-geni: Enable I2C on SA8255p Qualcomm platforms Enable I2C on SA8255p Qualcomm platforms - - - - --- 2026-01-12 Praveen Talari cazzacarna Needs Review / ACK
[v3,11/12] i2c: qcom-geni: Store of_device_id data in driver private struct Enable I2C on SA8255p Qualcomm platforms 1 - - - --- 2026-01-12 Praveen Talari cazzacarna Needs Review / ACK
[v3,10/12] i2c: qcom-geni: Use resources helper APIs in runtime PM functions Enable I2C on SA8255p Qualcomm platforms 1 - - - --- 2026-01-12 Praveen Talari cazzacarna Needs Review / ACK
[v3,09/12] i2c: qcom-geni: Move resource initialization to separate function Enable I2C on SA8255p Qualcomm platforms 1 - - - --- 2026-01-12 Praveen Talari cazzacarna Needs Review / ACK
[v3,08/12] i2c: qcom-geni: Isolate serial engine setup Enable I2C on SA8255p Qualcomm platforms 1 - - - --- 2026-01-12 Praveen Talari cazzacarna Needs Review / ACK
[v3,07/12] dt-bindings: i2c: Describe SA8255p Enable I2C on SA8255p Qualcomm platforms - - 1 - --- 2026-01-12 Praveen Talari cazzacarna Needs Review / ACK
[v6,2/2] i2c: spacemit: introduce pio for k1 i2c: spacemit: introduce pio for k1 - - - - --- 2026-01-08 Troy Mitchell cazzacarna Under Review
[v6,1/2] i2c: spacemit: move i2c_xfer_msg() i2c: spacemit: introduce pio for k1 - - 2 - --- 2026-01-08 Troy Mitchell cazzacarna Under Review
[v2,6/6] i2c: designware: Remove an unnecessary condition i2c: designware: Enable mode swapping - - 1 - --- 2025-12-18 Heikki Krogerus cazzacarna New
[v2,5/6] i2c: designware: Enable mode swapping i2c: designware: Enable mode swapping - - - - --- 2025-12-18 Heikki Krogerus cazzacarna New
[v2,4/6] i2c: designware: Combine the init functions i2c: designware: Enable mode swapping - - 1 - --- 2025-12-18 Heikki Krogerus cazzacarna New
[v2,3/6] i2c: designware: Combine some of the common functions i2c: designware: Enable mode swapping - - - - --- 2025-12-18 Heikki Krogerus cazzacarna New
[4/8] Add Advantech EIO I2C driver Add support for Advantech EIO MFD series devices - - - - --- 2025-12-12 Ramiro Oliveira cazzacarna New
[v4,1/4] i2c: machxo2: new driver [v4,1/4] i2c: machxo2: new driver - - - - --- 2025-12-10 Matthias Schiffer cazzacarna New
[1/4] dt-bindings: eeprom: at24: Add compatible for Giantec GT24P64A Preparations for camera support on Fairphone 4 1 - - - --- 2025-12-10 Luca Weiss brgl Needs Review / ACK
i2c: piix4: Add support for I2C block data transactions i2c: piix4: Add support for I2C block data transactions - - - - --- 2025-12-09 Qing Chang (qinchang) cazzacarna Needs Review / ACK
[RESEND,1/3] dt-bindings: eeprom: at24: Add compatible for Belling BL24C04A/BL24C16F Add Belling EEPROMs found in Radxa boards 1 - - - --- 2025-12-02 FUKAUMI Naoki brgl Needs Review / ACK
[RESEND,v3,5/5] docs: i2c: i2c-topology: add section about bus speed I2C Mux per channel bus speed - - - - --- 2025-12-02 Marcus Folkesson wsa Needs Review / ACK
[RESEND,v3,4/5] i2c: davinci: add support for setting bus frequency I2C Mux per channel bus speed 1 - - - --- 2025-12-02 Marcus Folkesson cazzacarna Needs Review / ACK
[RESEND,v3,3/5] i2c: davinci: calculate bus freq from Hz instead of kHz I2C Mux per channel bus speed - - 1 - --- 2025-12-02 Marcus Folkesson cazzacarna Needs Review / ACK
[RESEND,v3,2/5] i2c: mux: add support for per channel bus frequency I2C Mux per channel bus speed - - - - --- 2025-12-02 Marcus Folkesson wsa Needs Review / ACK
[RESEND,v3,1/5] i2c: core: add callback to change bus frequency I2C Mux per channel bus speed - - - - --- 2025-12-02 Marcus Folkesson wsa Needs Review / ACK
[RESEND] media: camss: csiphy: Make CSIPHY status macro cross-platform [RESEND] media: camss: csiphy: Make CSIPHY status macro cross-platform - - - - --- 2025-12-01 Hangxiang Ma cazzacarna Needs Review / ACK
[v4,7/7] i2c: designware: Support of controller with IC_EMPTYFIFO_HOLD_MASTER disabled i2c: designware: Improve support of multi-messages transfer - - - - --- 2025-11-26 Benoît Monin cazzacarna Under Review
[v4,6/7] i2c: designware: Use runtime PM macro for auto-cleanup i2c: designware: Improve support of multi-messages transfer - - 1 - --- 2025-11-26 Benoît Monin cazzacarna Under Review
[v4,5/7] i2c: designware: Implement I2C_M_STOP support i2c: designware: Improve support of multi-messages transfer - - - - --- 2025-11-26 Benoît Monin cazzacarna Under Review
i2c: ismt: add i2c bus recovery on timed out transaction i2c: ismt: add i2c bus recovery on timed out transaction - - - - --- 2025-11-25 Jens Stobernack (Nokia) cazzacarna Needs Review / ACK
[v1,1/2] i2c: acpi: Return -ENOENT when no resources found in i2c_acpi_client_count() i2c: acpi: Ad-hoc cleanup and kernel-doc fix - - - - --- 2025-11-25 Andy Shevchenko wsa New
[v24,4/4] i2c: ast2600: Add target mode support Add ASPEED AST2600 I2C controller driver - - - - --- 2025-11-18 Ryan Chen New
[v24,3/4] i2c: ast2600: Add controller driver for new register layout Add ASPEED AST2600 I2C controller driver - - - - --- 2025-11-18 Ryan Chen New
[v24,2/4] dt-bindings: i2c: ast2600-i2c.yaml: Add global-regs and transfer-mode properties Add ASPEED AST2600 I2C controller driver - - - - --- 2025-11-18 Ryan Chen New
[v24,1/4] dt-bindings: i2c: Split AST2600 binding into a new YAML Add ASPEED AST2600 I2C controller driver - - - - --- 2025-11-18 Ryan Chen New
i2c: core: prevent use-after-free in i2c_get_adapter by removing adapter from IDR earlier i2c: core: prevent use-after-free in i2c_get_adapter by removing adapter from IDR earlier - - - - --- 2025-11-17 Sameeksha Sankpal wsa New
[10/21] i2c: nomadik: don't use GENMASK() Untitled series #479474 - - - - --- 2025-10-25 Yury Norov (NVIDIA) cazzacarna Needs Review / ACK
[10/21] i2c: nomadik: don't use GENMASK() Untitled series #479470 - - 1 - --- 2025-10-25 Yury Norov (NVIDIA) cazzacarna Needs Review / ACK
« 1 2 3 4 »