Show patches with: State = Action Required       |    Archived = No       |   28050 patches
« 1 2 3 4 … 280 281 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[v1,1/1] gpiolib: Do not unexport GPIO on freeing [v1,1/1] gpiolib: Do not unexport GPIO on freeing - - - - --- 2023-06-02 Andy Shevchenko New
[v7,9/9] serial: sc16is7xx: improve comments about variants serial: sc16is7xx: fix GPIO regression and rs485 improvements - - 1 - --- 2023-06-02 Hugo Villeneuve New
[v7,8/9] serial: sc16is7xx: add post reset delay serial: sc16is7xx: fix GPIO regression and rs485 improvements - - 1 1 --- 2023-06-02 Hugo Villeneuve New
[v7,7/9] serial: sc16is7xx: add call to get rs485 DT flags and properties serial: sc16is7xx: fix GPIO regression and rs485 improvements - - 2 1 --- 2023-06-02 Hugo Villeneuve New
[v7,6/9] serial: sc16is7xx: fix bug when first setting GPIO direction serial: sc16is7xx: fix GPIO regression and rs485 improvements - 1 1 1 --- 2023-06-02 Hugo Villeneuve New
[v7,5/9] serial: sc16is7xx: fix regression with GPIO configuration serial: sc16is7xx: fix GPIO regression and rs485 improvements - 2 1 - --- 2023-06-02 Hugo Villeneuve New
[v7,4/9] dt-bindings: sc16is7xx: Add property to change GPIO function serial: sc16is7xx: fix GPIO regression and rs485 improvements 1 - 1 - --- 2023-06-02 Hugo Villeneuve New
[v7,3/9] serial: sc16is7xx: refactor GPIO controller registration serial: sc16is7xx: fix GPIO regression and rs485 improvements - - 1 1 --- 2023-06-02 Hugo Villeneuve New
[v7,2/9] serial: sc16is7xx: mark IOCONTROL register as volatile serial: sc16is7xx: fix GPIO regression and rs485 improvements - - 1 1 --- 2023-06-02 Hugo Villeneuve New
[v7,1/9] serial: sc16is7xx: fix broken port 0 uart init serial: sc16is7xx: fix GPIO regression and rs485 improvements - 1 2 1 --- 2023-06-02 Hugo Villeneuve New
[v1,1/1] gpiolib: Remove unused gpio_cansleep() [v1,1/1] gpiolib: Remove unused gpio_cansleep() - - - - --- 2023-06-02 Andy Shevchenko New
[v4,3/3] arm64: tegra: Add Tegra234 pin controllers pinctrl: tegra: Add Tegra234 pinmux driver - - - - --- 2023-06-02 Thierry Reding New
[v4,2/3] pinctrl: tegra: Add Tegra234 pinmux driver pinctrl: tegra: Add Tegra234 pinmux driver - - - - --- 2023-06-02 Thierry Reding New
[v4,1/3] dt-bindings: pinctrl: Document Tegra234 pin controllers pinctrl: tegra: Add Tegra234 pinmux driver - - - - --- 2023-06-02 Thierry Reding New
[v2,10/10] MAINTAINERS: add entry for ARM/STM32 ARCHITECTURE Add STM32MP25 support - - - - --- 2023-06-02 Alexandre Torgue New
[v2,09/10] arm64: defconfig: enable ARCH_STM32 and STM32 serial driver Add STM32MP25 support - - - - --- 2023-06-02 Alexandre Torgue New
[v2,08/10] arm64: dts: st: add stm32mp257f-ev1 board support Add STM32MP25 support - - - - --- 2023-06-02 Alexandre Torgue New
[v2,07/10] dt-bindings: stm32: document stm32mp257f-ev1 board Add STM32MP25 support - - 1 - --- 2023-06-02 Alexandre Torgue New
[v2,06/10] arm64: dts: st: introduce stm32mp25 pinctrl files Add STM32MP25 support - - - - --- 2023-06-02 Alexandre Torgue New
[v2,05/10] arm64: dts: st: introduce stm32mp25 SoCs family Add STM32MP25 support - - - - --- 2023-06-02 Alexandre Torgue New
[v2,04/10] arm64: introduce STM32 family on Armv8 architecture Add STM32MP25 support - - - - --- 2023-06-02 Alexandre Torgue New
[v2,03/10] dt-bindings: stm32: add st,stm32mp25-syscfg compatible for syscon Add STM32MP25 support 1 - - - --- 2023-06-02 Alexandre Torgue New
[v2,02/10] pinctrl: stm32: add stm32mp257 pinctrl support Add STM32MP25 support - - - - --- 2023-06-02 Alexandre Torgue New
[v2,01/10] dt-bindings: pinctrl: stm32: support for stm32mp257 and additional packages Add STM32MP25 support - - 1 - --- 2023-06-02 Alexandre Torgue New
[V8,8/8] arm64: defconfig: Enable IPQ5018 SoC base configs Add minimal boot support for IPQ5018 - - 1 - --- 2023-06-02 Sricharan Ramabadhran New
[V8,7/8] arm64: dts: Add ipq5018 SoC and rdp432-c2 board support Add minimal boot support for IPQ5018 - - 1 - --- 2023-06-02 Sricharan Ramabadhran New
[V8,6/8] dt-bindings: scm: Add compatible for IPQ5018 Add minimal boot support for IPQ5018 1 - - - --- 2023-06-02 Sricharan Ramabadhran New
[V8,5/8] dt-bindings: qcom: Add ipq5018 bindings Add minimal boot support for IPQ5018 - - 1 - --- 2023-06-02 Sricharan Ramabadhran New
[V8,4/8] pinctrl: qcom: Add IPQ5018 pinctrl driver Add minimal boot support for IPQ5018 - - 2 - --- 2023-06-02 Sricharan Ramabadhran New
[V8,3/8] dt-bindings: pinctrl: qcom: Add support for ipq5018 Add minimal boot support for IPQ5018 - - 1 - --- 2023-06-02 Sricharan Ramabadhran New
[V8,2/8] clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018 Add minimal boot support for IPQ5018 - - - - --- 2023-06-02 Sricharan Ramabadhran New
[V8,1/8] dt-bindings: arm64: Add IPQ5018 clock and reset Add minimal boot support for IPQ5018 - - 1 - --- 2023-06-02 Sricharan Ramabadhran New
[v2] gpio: ath79: Add missing check for platform_get_irq [v2] gpio: ath79: Add missing check for platform_get_irq - - 1 - --- 2023-06-02 Jiasheng Jiang New
[v4,4/4] platform/x86/amd: pmc: Use pm_pr_dbg() for suspend related messages [v4,1/4] include/linux/suspend.h: Only show pm_pr_dbg messages at suspend/resume - - - - --- 2023-06-02 Limonciello, Mario New
[v4,3/4] pinctrl: amd: Use pm_pr_dbg to show debugging messages [v4,1/4] include/linux/suspend.h: Only show pm_pr_dbg messages at suspend/resume - - - - --- 2023-06-02 Limonciello, Mario New
[v4,2/4] ACPI: x86: Add pm_debug_messages for LPS0 _DSM state tracking [v4,1/4] include/linux/suspend.h: Only show pm_pr_dbg messages at suspend/resume - - - - --- 2023-06-02 Limonciello, Mario New
[v4,1/4] include/linux/suspend.h: Only show pm_pr_dbg messages at suspend/resume [v4,1/4] include/linux/suspend.h: Only show pm_pr_dbg messages at suspend/resume - - - - --- 2023-06-02 Limonciello, Mario New
[v2] gpio: sifive: Add missing check for platform_get_irq [v2] gpio: sifive: Add missing check for platform_get_irq - - 1 - --- 2023-06-02 Jiasheng Jiang New
[v2] pinctrl: qcom: Add support to log pin status before suspend for TLMM [v2] pinctrl: qcom: Add support to log pin status before suspend for TLMM - - - - --- 2023-06-02 Minghao Zhang New
[v3,4/4] platform/x86/amd: pmc: Use pm_pr_dbg() for suspend related messages [v3,1/4] include/linux/suspend.h: Only show pm_pr_dbg messages at suspend/resume - - - - --- 2023-06-01 Limonciello, Mario New
[v3,3/4] pinctrl: amd: Use pm_pr_dbg to show debugging messages [v3,1/4] include/linux/suspend.h: Only show pm_pr_dbg messages at suspend/resume - - - - --- 2023-06-01 Limonciello, Mario New
[v3,2/4] ACPI: x86: Add pm_debug_messages for LPS0 _DSM state tracking [v3,1/4] include/linux/suspend.h: Only show pm_pr_dbg messages at suspend/resume - - - - --- 2023-06-01 Limonciello, Mario New
[v3,1/4] include/linux/suspend.h: Only show pm_pr_dbg messages at suspend/resume [v3,1/4] include/linux/suspend.h: Only show pm_pr_dbg messages at suspend/resume - - - - --- 2023-06-01 Limonciello, Mario New
[v2,1/1] gpio: mpc8xxx: latch GPIOs state on module load when configured as output gpio: mpc8xxx: latch GPIOs state on module load when configured as output - - - - --- 2023-06-01 msmulski2@gmail.com New
[v6,9/9] serial: sc16is7xx: improve comments about variants serial: sc16is7xx: fix GPIO regression and rs485 improvements - - 1 - --- 2023-06-01 Hugo Villeneuve New
[v6,8/9] serial: sc16is7xx: add post reset delay serial: sc16is7xx: fix GPIO regression and rs485 improvements - - 1 1 --- 2023-06-01 Hugo Villeneuve New
[v6,7/9] serial: sc16is7xx: add call to get rs485 DT flags and properties serial: sc16is7xx: fix GPIO regression and rs485 improvements - - 2 1 --- 2023-06-01 Hugo Villeneuve New
[v6,6/9] serial: sc16is7xx: fix bug when first setting GPIO direction serial: sc16is7xx: fix GPIO regression and rs485 improvements - 1 1 1 --- 2023-06-01 Hugo Villeneuve New
[v6,5/9] serial: sc16is7xx: fix regression with GPIO configuration serial: sc16is7xx: fix GPIO regression and rs485 improvements - 2 1 - --- 2023-06-01 Hugo Villeneuve New
[v6,4/9] dt-bindings: sc16is7xx: Add property to change GPIO function serial: sc16is7xx: fix GPIO regression and rs485 improvements 1 - 1 - --- 2023-06-01 Hugo Villeneuve New
[v6,3/9] serial: sc16is7xx: refactor GPIO controller registration serial: sc16is7xx: fix GPIO regression and rs485 improvements - - 1 1 --- 2023-06-01 Hugo Villeneuve New
[v6,2/9] serial: sc16is7xx: mark IOCONTROL register as volatile serial: sc16is7xx: fix GPIO regression and rs485 improvements - - 1 1 --- 2023-06-01 Hugo Villeneuve New
[v6,1/9] serial: sc16is7xx: fix broken port 0 uart init serial: sc16is7xx: fix GPIO regression and rs485 improvements - 1 2 1 --- 2023-06-01 Hugo Villeneuve New
dt-bindings: pinctrl: Drop k3 dt-bindings: pinctrl: Drop k3 1 - - - --- 2023-06-01 Nishanth Menon New
[v5,9/9] serial: sc16is7xx: improve comments about variants serial: sc16is7xx: fix GPIO regression and rs485 improvements - - 1 - --- 2023-06-01 Hugo Villeneuve New
[v5,8/9] serial: sc16is7xx: add post reset delay serial: sc16is7xx: fix GPIO regression and rs485 improvements - - 1 1 --- 2023-06-01 Hugo Villeneuve New
[v5,7/9] serial: sc16is7xx: add call to get rs485 DT flags and properties serial: sc16is7xx: fix GPIO regression and rs485 improvements - - 2 1 --- 2023-06-01 Hugo Villeneuve New
[v5,6/9] serial: sc16is7xx: fix bug when first setting GPIO direction serial: sc16is7xx: fix GPIO regression and rs485 improvements - 1 1 1 --- 2023-06-01 Hugo Villeneuve New
[v5,5/9] serial: sc16is7xx: fix regression with GPIO configuration serial: sc16is7xx: fix GPIO regression and rs485 improvements - 2 - - --- 2023-06-01 Hugo Villeneuve New
[v5,4/9] dt-bindings: sc16is7xx: Add property to change GPIO function serial: sc16is7xx: fix GPIO regression and rs485 improvements 1 - 1 - --- 2023-06-01 Hugo Villeneuve New
[v5,3/9] serial: sc16is7xx: refactor GPIO controller registration serial: sc16is7xx: fix GPIO regression and rs485 improvements - - 1 1 --- 2023-06-01 Hugo Villeneuve New
[v5,2/9] serial: sc16is7xx: mark IOCONTROL register as volatile serial: sc16is7xx: fix GPIO regression and rs485 improvements - - 1 1 --- 2023-06-01 Hugo Villeneuve New
[v5,1/9] serial: sc16is7xx: fix broken port 0 uart init serial: sc16is7xx: fix GPIO regression and rs485 improvements - 1 2 1 --- 2023-06-01 Hugo Villeneuve New
[8/8] pinctrl: qcom: organize audio drivers in menuconfig [1/8] pinctrl: qcom: qdf2xxx: drop ACPI_PTR - - - - --- 2023-06-01 Krzysztof Kozlowski New
[7/8] pinctrl: qcom: organize main SoC drivers in new Kconfig.msm [1/8] pinctrl: qcom: qdf2xxx: drop ACPI_PTR - - 2 - --- 2023-06-01 Krzysztof Kozlowski New
[6/8] pinctrl: qcom: allow true compile testing [1/8] pinctrl: qcom: qdf2xxx: drop ACPI_PTR - - 1 - --- 2023-06-01 Krzysztof Kozlowski New
[5/8] pinctrl: qcom: mark true OF dependency - common MSM pinctrl code [1/8] pinctrl: qcom: qdf2xxx: drop ACPI_PTR - - 1 - --- 2023-06-01 Krzysztof Kozlowski New
[4/8] pinctrl: qcom: drop unneeded GPIOLIB dependency [1/8] pinctrl: qcom: qdf2xxx: drop ACPI_PTR - - 1 - --- 2023-06-01 Krzysztof Kozlowski New
[3/8] pinctrl: qcom: correct language typo (Technologies) [1/8] pinctrl: qcom: qdf2xxx: drop ACPI_PTR - - 1 - --- 2023-06-01 Krzysztof Kozlowski New
[2/8] pinctrl: qcom: fix indentation in Kconfig [1/8] pinctrl: qcom: qdf2xxx: drop ACPI_PTR - - 1 - --- 2023-06-01 Krzysztof Kozlowski New
[1/8] pinctrl: qcom: qdf2xxx: drop ACPI_PTR [1/8] pinctrl: qcom: qdf2xxx: drop ACPI_PTR - - 2 - --- 2023-06-01 Krzysztof Kozlowski New
[libgpiod] tools: tests: replace egrep with grep -E [libgpiod] tools: tests: replace egrep with grep -E - - - - --- 2023-06-01 Bartosz Golaszewski New
gpio: ath79: Add missing check for platform_get_irq gpio: ath79: Add missing check for platform_get_irq - 1 - - --- 2023-06-01 Jiasheng Jiang New
gpio: sifive: Add missing check for platform_get_irq gpio: sifive: Add missing check for platform_get_irq - 1 - - --- 2023-06-01 Jiasheng Jiang New
[GIT,PULL] pinctrl: s32: Updates for v6.5 [GIT,PULL] pinctrl: s32: Updates for v6.5 - - - - --- 2023-06-01 Chester Lin New
[v1,34/43] gpio: ep93xx: add DT support for gpio-ep93xx ep93xx device tree conversion - - 2 - --- 2023-06-01 Nikita Shubin New
[v1,33/43] dt-bindings: gpio: Add Cirrus EP93xx Untitled series #357607 - - - - --- 2023-06-01 Nikita Shubin New
[v1,07/43] pinctrl: add a Cirrus ep93xx SoC pin controller ep93xx device tree conversion - - 1 - --- 2023-06-01 Nikita Shubin New
[v1,06/43] dt-bindings: pinctrl: Add Cirrus EP93xx ep93xx device tree conversion - - 1 - --- 2023-06-01 Nikita Shubin New
[v1,01/43] gpio: ep93xx: split device in multiple [v1,01/43] gpio: ep93xx: split device in multiple - - 1 - --- 2023-06-01 Nikita Shubin New
[net-next,v10,9/9] net: txgbe: Support phylink MAC layer TXGBE PHYLINK support - - - - --- 2023-06-01 Jiawen Wu New
[net-next,v10,8/9] net: txgbe: Implement phylink pcs TXGBE PHYLINK support - - 1 - --- 2023-06-01 Jiawen Wu New
[net-next,v10,7/9] net: pcs: Add 10GBASE-R mode for Synopsys Designware XPCS TXGBE PHYLINK support - - 1 - --- 2023-06-01 Jiawen Wu New
[net-next,v10,6/9] net: txgbe: Support GPIO to SFP socket TXGBE PHYLINK support - - 1 - --- 2023-06-01 Jiawen Wu New
[net-next,v10,5/9] net: txgbe: Add SFP module identify TXGBE PHYLINK support - - 2 - --- 2023-06-01 Jiawen Wu New
[net-next,v10,4/9] net: txgbe: Register I2C platform device TXGBE PHYLINK support - - 3 - --- 2023-06-01 Jiawen Wu New
[net-next,v10,3/9] net: txgbe: Register fixed rate clock TXGBE PHYLINK support - - 1 - --- 2023-06-01 Jiawen Wu New
[net-next,v10,2/9] i2c: designware: Add driver support for Wangxun 10Gb NIC TXGBE PHYLINK support - - 2 - --- 2023-06-01 Jiawen Wu New
[net-next,v10,1/9] net: txgbe: Add software nodes to support phylink TXGBE PHYLINK support - - 2 - --- 2023-06-01 Jiawen Wu New
[v2] gpio: mpc8xxx: latch GPIOs state on module load when configured as output [v2] gpio: mpc8xxx: latch GPIOs state on module load when configured as output - - - - --- 2023-05-31 msmulski2@gmail.com New
gpio: mpc8xxx: latch GPIOs state on module load when configured as output gpio: mpc8xxx: latch GPIOs state on module load when configured as output - - - - --- 2023-05-31 msmulski2@gmail.com New
[v2,5/5] MAINTAINERS: hpe: Add GPIO ARM: Add GPIO support - - - - --- 2023-05-31 Hawkins, Nick New
[v2,4/5] hwmon: (gxp_fan_ctrl) Provide fan info via gpio ARM: Add GPIO support - - - - --- 2023-05-31 Hawkins, Nick New
[v2,3/5] dt-bindings: hwmon: hpe,gxp-fanctrl: remove fn2 and pl regs ARM: Add GPIO support - - - - --- 2023-05-31 Hawkins, Nick New
[v2,2/5] gpio: gxp: Add HPE GXP GPIO ARM: Add GPIO support - - - - --- 2023-05-31 Hawkins, Nick New
[v2,1/5] dt-bindings: gpio: Add HPE GXP GPIO ARM: Add GPIO support - - - - --- 2023-05-31 Hawkins, Nick New
drivers/gpio : Remove redundant clearing of IRQ_TYPE_SENSE_MASK drivers/gpio : Remove redundant clearing of IRQ_TYPE_SENSE_MASK - - - - --- 2023-05-30 Lizhe New
[v2,2/2] gpio: use "active" and "inactive" instead of "high" and "low" for output hogs gpio: introduce hog properties with less ambiguity - - - - --- 2023-05-30 Uwe Kleine-König New
[v2,1/2] dt-bindings: gpio: introduce hog properties with less ambiguity gpio: introduce hog properties with less ambiguity 1 - - - --- 2023-05-30 Uwe Kleine-König New
[v3,3/3] arm64: tegra: Add Tegra234 pin controllers pinctrl: tegra: Add Tegra234 pinmux driver - - - - --- 2023-05-30 Thierry Reding New
« 1 2 3 4 … 280 281 »