| Message ID | 20240229010130.1380926-6-atishp@rivosinc.com |
|---|---|
| State | Changes Requested |
| Headers | show |
| Series | RISC-V SBI v2.0 PMU improvements and Perf sampling in KVM guest | expand |
On Wed, Feb 28, 2024 at 05:01:20PM -0800, Atish Patra wrote: > SBI v2.0 SBI introduced PMU snapshot feature which adds the following > features. > > 1. Read counter values directly from the shared memory instead of > csr read. > 2. Start multiple counters with initial values with one SBI call. > > These functionalities optimizes the number of traps to the higher > privilege mode. If the kernel is in VS mode while the hypervisor > deploy trap & emulate method, this would minimize all the hpmcounter > CSR read traps. If the kernel is running in S-mode, the benefits > reduced to CSR latency vs DRAM/cache latency as there is no trap > involved while accessing the hpmcounter CSRs. > > In both modes, it does saves the number of ecalls while starting > multiple counter together with an initial values. This is a likely > scenario if multiple counters overflow at the same time. > > Acked-by: Palmer Dabbelt <palmer@rivosinc.com> > Reviewed-by: Anup Patel <anup@brainfault.org> > Reviewed-by: Conor Dooley <conor.dooley@microchip.com> > Signed-off-by: Atish Patra <atishp@rivosinc.com> > --- > drivers/perf/riscv_pmu.c | 1 + > drivers/perf/riscv_pmu_sbi.c | 209 +++++++++++++++++++++++++++++++-- > include/linux/perf/riscv_pmu.h | 6 + > 3 files changed, 204 insertions(+), 12 deletions(-) > > diff --git a/drivers/perf/riscv_pmu.c b/drivers/perf/riscv_pmu.c > index 0dda70e1ef90..5b57acb770d3 100644 > --- a/drivers/perf/riscv_pmu.c > +++ b/drivers/perf/riscv_pmu.c > @@ -412,6 +412,7 @@ struct riscv_pmu *riscv_pmu_alloc(void) > cpuc->n_events = 0; > for (i = 0; i < RISCV_MAX_COUNTERS; i++) > cpuc->events[i] = NULL; > + cpuc->snapshot_addr = NULL; > } > pmu->pmu = (struct pmu) { > .event_init = riscv_pmu_event_init, > diff --git a/drivers/perf/riscv_pmu_sbi.c b/drivers/perf/riscv_pmu_sbi.c > index ea0fdb589f0d..8de5721e8019 100644 > --- a/drivers/perf/riscv_pmu_sbi.c > +++ b/drivers/perf/riscv_pmu_sbi.c > @@ -36,6 +36,9 @@ PMU_FORMAT_ATTR(event, "config:0-47"); > PMU_FORMAT_ATTR(firmware, "config:63"); > > static bool sbi_v2_available; > +static DEFINE_STATIC_KEY_FALSE(sbi_pmu_snapshot_available); > +#define sbi_pmu_snapshot_available() \ > + static_branch_unlikely(&sbi_pmu_snapshot_available) > > static struct attribute *riscv_arch_formats_attr[] = { > &format_attr_event.attr, > @@ -485,14 +488,100 @@ static int pmu_sbi_event_map(struct perf_event *event, u64 *econfig) > return ret; > } > > +static void pmu_sbi_snapshot_free(struct riscv_pmu *pmu) > +{ > + int cpu; > + > + for_each_possible_cpu(cpu) { > + struct cpu_hw_events *cpu_hw_evt = per_cpu_ptr(pmu->hw_events, cpu); > + > + if (!cpu_hw_evt->snapshot_addr) > + continue; > + > + free_page((unsigned long)cpu_hw_evt->snapshot_addr); > + cpu_hw_evt->snapshot_addr = NULL; > + cpu_hw_evt->snapshot_addr_phys = 0; > + } > +} > + > +static int pmu_sbi_snapshot_alloc(struct riscv_pmu *pmu) > +{ > + int cpu; > + struct page *snapshot_page; > + > + for_each_possible_cpu(cpu) { > + struct cpu_hw_events *cpu_hw_evt = per_cpu_ptr(pmu->hw_events, cpu); > + > + if (cpu_hw_evt->snapshot_addr) > + continue; > + > + snapshot_page = alloc_page(GFP_ATOMIC | __GFP_ZERO); > + if (!snapshot_page) { > + pmu_sbi_snapshot_free(pmu); > + return -ENOMEM; > + } > + cpu_hw_evt->snapshot_addr = page_to_virt(snapshot_page); > + cpu_hw_evt->snapshot_addr_phys = page_to_phys(snapshot_page); > + } > + > + return 0; > +} > + > +static void pmu_sbi_snapshot_disable(void) > +{ > + sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_SNAPSHOT_SET_SHMEM, -1, > + -1, 0, 0, 0, 0); > +} > + > +static int pmu_sbi_snapshot_setup(struct riscv_pmu *pmu, int cpu) > +{ > + struct cpu_hw_events *cpu_hw_evt; > + struct sbiret ret = {0}; > + > + cpu_hw_evt = per_cpu_ptr(pmu->hw_events, cpu); > + if (!cpu_hw_evt->snapshot_addr_phys) > + return -EINVAL; > + > + if (cpu_hw_evt->snapshot_set_done) > + return 0; > + > + if (IS_ENABLED(CONFIG_32BIT)) > + ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_SNAPSHOT_SET_SHMEM, > + cpu_hw_evt->snapshot_addr_phys, > + (u64)(cpu_hw_evt->snapshot_addr_phys) >> 32, 0, 0, 0, 0); > + else > + ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_SNAPSHOT_SET_SHMEM, > + cpu_hw_evt->snapshot_addr_phys, 0, 0, 0, 0, 0); > + > + /* Free up the snapshot area memory and fall back to SBI PMU calls without snapshot */ > + if (ret.error) { > + if (ret.error != SBI_ERR_NOT_SUPPORTED) > + pr_warn("pmu snapshot setup failed with error %ld\n", ret.error); > + return sbi_err_map_linux_errno(ret.error); > + } > + > + cpu_hw_evt->snapshot_set_done = true; > + > + return 0; > +} > + > static u64 pmu_sbi_ctr_read(struct perf_event *event) > { > struct hw_perf_event *hwc = &event->hw; > int idx = hwc->idx; > struct sbiret ret; > u64 val = 0; > + struct riscv_pmu *pmu = to_riscv_pmu(event->pmu); > + struct cpu_hw_events *cpu_hw_evt = this_cpu_ptr(pmu->hw_events); > + struct riscv_pmu_snapshot_data *sdata = cpu_hw_evt->snapshot_addr; > union sbi_pmu_ctr_info info = pmu_ctr_list[idx]; > > + /* Read the value from the shared memory directly */ > + if (sbi_pmu_snapshot_available()) { > + val = sdata->ctr_values[idx]; > + return val; > + } > + > if (pmu_sbi_is_fw_event(event)) { > ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_FW_READ, > hwc->idx, 0, 0, 0, 0, 0); > @@ -539,6 +628,7 @@ static void pmu_sbi_ctr_start(struct perf_event *event, u64 ival) > struct hw_perf_event *hwc = &event->hw; > unsigned long flag = SBI_PMU_START_FLAG_SET_INIT_VALUE; > > + /* There is no benefit setting SNAPSHOT FLAG for a single counter */ > #if defined(CONFIG_32BIT) > ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_START, hwc->idx, > 1, flag, ival, ival >> 32, 0); > @@ -559,16 +649,36 @@ static void pmu_sbi_ctr_stop(struct perf_event *event, unsigned long flag) > { > struct sbiret ret; > struct hw_perf_event *hwc = &event->hw; > + struct riscv_pmu *pmu = to_riscv_pmu(event->pmu); > + struct cpu_hw_events *cpu_hw_evt = this_cpu_ptr(pmu->hw_events); > + struct riscv_pmu_snapshot_data *sdata = cpu_hw_evt->snapshot_addr; > > if ((hwc->flags & PERF_EVENT_FLAG_USER_ACCESS) && > (hwc->flags & PERF_EVENT_FLAG_USER_READ_CNT)) > pmu_sbi_reset_scounteren((void *)event); > > + if (sbi_pmu_snapshot_available()) > + flag |= SBI_PMU_STOP_FLAG_TAKE_SNAPSHOT; > + > ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_STOP, hwc->idx, 1, flag, 0, 0, 0); > - if (ret.error && (ret.error != SBI_ERR_ALREADY_STOPPED) && > - flag != SBI_PMU_STOP_FLAG_RESET) > + if (!ret.error && sbi_pmu_snapshot_available()) { > + /* > + * The counter snapshot is based on the index base specified by hwc->idx. > + * The actual counter value is updated in shared memory at index 0 when counter > + * mask is 0x01. To ensure accurate counter values, it's necessary to transfer > + * the counter value to shared memory. However, if hwc->idx is zero, the counter > + * value is already correctly updated in shared memory, requiring no further > + * adjustment. > + */ > + if (hwc->idx > 0) { > + sdata->ctr_values[hwc->idx] = sdata->ctr_values[0]; > + sdata->ctr_values[0] = 0; > + } > + } else if (ret.error && (ret.error != SBI_ERR_ALREADY_STOPPED) && > + flag != SBI_PMU_STOP_FLAG_RESET) { > pr_err("Stopping counter idx %d failed with error %d\n", > hwc->idx, sbi_err_map_linux_errno(ret.error)); > + } > } > > static int pmu_sbi_find_num_ctrs(void) > @@ -626,10 +736,14 @@ static inline void pmu_sbi_stop_all(struct riscv_pmu *pmu) > static inline void pmu_sbi_stop_hw_ctrs(struct riscv_pmu *pmu) > { > struct cpu_hw_events *cpu_hw_evt = this_cpu_ptr(pmu->hw_events); > + unsigned long flag = 0; > + > + if (sbi_pmu_snapshot_available()) > + flag = SBI_PMU_STOP_FLAG_TAKE_SNAPSHOT; > > /* No need to check the error here as we can't do anything about the error */ > sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_STOP, 0, > - cpu_hw_evt->used_hw_ctrs[0], 0, 0, 0, 0); > + cpu_hw_evt->used_hw_ctrs[0], flag, 0, 0, 0); > } > > /* > @@ -638,11 +752,10 @@ static inline void pmu_sbi_stop_hw_ctrs(struct riscv_pmu *pmu) > * while the overflowed counters need to be started with updated initialization > * value. > */ > -static inline void pmu_sbi_start_overflow_mask(struct riscv_pmu *pmu, > - unsigned long ctr_ovf_mask) > +static noinline void pmu_sbi_start_ovf_ctrs_sbi(struct cpu_hw_events *cpu_hw_evt, > + unsigned long ctr_ovf_mask) > { > int idx = 0; > - struct cpu_hw_events *cpu_hw_evt = this_cpu_ptr(pmu->hw_events); > struct perf_event *event; > unsigned long flag = SBI_PMU_START_FLAG_SET_INIT_VALUE; > unsigned long ctr_start_mask = 0; > @@ -677,6 +790,49 @@ static inline void pmu_sbi_start_overflow_mask(struct riscv_pmu *pmu, > } > } > > +static noinline void pmu_sbi_start_ovf_ctrs_snapshot(struct cpu_hw_events *cpu_hw_evt, > + unsigned long ctr_ovf_mask) > +{ > + int idx = 0; > + struct perf_event *event; > + unsigned long flag = SBI_PMU_START_FLAG_INIT_FROM_SNAPSHOT; > + u64 max_period, init_val = 0; > + struct hw_perf_event *hwc; > + unsigned long ctr_start_mask = 0; > + struct riscv_pmu_snapshot_data *sdata = cpu_hw_evt->snapshot_addr; > + > + for_each_set_bit(idx, cpu_hw_evt->used_hw_ctrs, RISCV_MAX_COUNTERS) { > + if (ctr_ovf_mask & (1 << idx)) { nit: BIT(idx) > + event = cpu_hw_evt->events[idx]; > + hwc = &event->hw; > + max_period = riscv_pmu_ctr_get_width_mask(event); > + init_val = local64_read(&hwc->prev_count) & max_period; > + sdata->ctr_values[idx] = init_val; > + } > + /* > + * We donot need to update the non-overflow counters the previous do not > + * value should have been there already. > + */ > + } > + > + ctr_start_mask = cpu_hw_evt->used_hw_ctrs[0]; > + > + /* Start all the counters in a single shot */ > + sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_START, 0, ctr_start_mask, > + flag, 0, 0, 0); I think we should always loop over all words of used_hw_ctrs[] since it'll have more than one for riscv32. Hmm, it seems like there are several places where we don't expect riscv32's second word to be used... > +} > + > +static void pmu_sbi_start_overflow_mask(struct riscv_pmu *pmu, > + unsigned long ctr_ovf_mask) > +{ > + struct cpu_hw_events *cpu_hw_evt = this_cpu_ptr(pmu->hw_events); > + > + if (sbi_pmu_snapshot_available()) > + pmu_sbi_start_ovf_ctrs_snapshot(cpu_hw_evt, ctr_ovf_mask); > + else > + pmu_sbi_start_ovf_ctrs_sbi(cpu_hw_evt, ctr_ovf_mask); > +} > + > static irqreturn_t pmu_sbi_ovf_handler(int irq, void *dev) > { > struct perf_sample_data data; > @@ -690,6 +846,7 @@ static irqreturn_t pmu_sbi_ovf_handler(int irq, void *dev) > unsigned long overflowed_ctrs = 0; > struct cpu_hw_events *cpu_hw_evt = dev; > u64 start_clock = sched_clock(); > + struct riscv_pmu_snapshot_data *sdata = cpu_hw_evt->snapshot_addr; > > if (WARN_ON_ONCE(!cpu_hw_evt)) > return IRQ_NONE; > @@ -711,8 +868,10 @@ static irqreturn_t pmu_sbi_ovf_handler(int irq, void *dev) > pmu_sbi_stop_hw_ctrs(pmu); > > /* Overflow status register should only be read after counter are stopped */ > - ALT_SBI_PMU_OVERFLOW(overflow); > - > + if (sbi_pmu_snapshot_available()) > + overflow = sdata->ctr_overflow_mask; > + else > + ALT_SBI_PMU_OVERFLOW(overflow); > /* > * Overflow interrupt pending bit should only be cleared after stopping > * all the counters to avoid any race condition. > @@ -794,6 +953,9 @@ static int pmu_sbi_starting_cpu(unsigned int cpu, struct hlist_node *node) > enable_percpu_irq(riscv_pmu_irq, IRQ_TYPE_NONE); > } > > + if (sbi_pmu_snapshot_available()) > + return pmu_sbi_snapshot_setup(pmu, cpu); > + > return 0; > } > > @@ -807,6 +969,9 @@ static int pmu_sbi_dying_cpu(unsigned int cpu, struct hlist_node *node) > /* Disable all counters access for user mode now */ > csr_write(CSR_SCOUNTEREN, 0x0); > > + if (sbi_pmu_snapshot_available()) > + pmu_sbi_snapshot_disable(); > + > return 0; > } > > @@ -1076,10 +1241,6 @@ static int pmu_sbi_device_probe(struct platform_device *pdev) > pmu->event_unmapped = pmu_sbi_event_unmapped; > pmu->csr_index = pmu_sbi_csr_index; > > - ret = cpuhp_state_add_instance(CPUHP_AP_PERF_RISCV_STARTING, &pmu->node); > - if (ret) > - return ret; > - > ret = riscv_pm_pmu_register(pmu); > if (ret) > goto out_unregister; > @@ -1088,8 +1249,32 @@ static int pmu_sbi_device_probe(struct platform_device *pdev) > if (ret) > goto out_unregister; > > + /* SBI PMU Snapsphot is only available in SBI v2.0 */ > + if (sbi_v2_available) { > + ret = pmu_sbi_snapshot_alloc(pmu); > + if (ret) > + goto out_unregister; > + > + ret = pmu_sbi_snapshot_setup(pmu, smp_processor_id()); > + if (!ret) { > + pr_info("SBI PMU snapshot detected\n"); > + /* > + * We enable it once here for the boot cpu. If snapshot shmem setup > + * fails during cpu hotplug process, it will fail to start the cpu > + * as we can not handle hetergenous PMUs with different snapshot > + * capability. > + */ > + static_branch_enable(&sbi_pmu_snapshot_available); > + } > + /* Snapshot is an optional feature. Continue if not available */ > + } > + > register_sysctl("kernel", sbi_pmu_sysctl_table); > > + ret = cpuhp_state_add_instance(CPUHP_AP_PERF_RISCV_STARTING, &pmu->node); > + if (ret) > + return ret; > + > return 0; > > out_unregister: > diff --git a/include/linux/perf/riscv_pmu.h b/include/linux/perf/riscv_pmu.h > index 43282e22ebe1..c3fa90970042 100644 > --- a/include/linux/perf/riscv_pmu.h > +++ b/include/linux/perf/riscv_pmu.h > @@ -39,6 +39,12 @@ struct cpu_hw_events { > DECLARE_BITMAP(used_hw_ctrs, RISCV_MAX_COUNTERS); > /* currently enabled firmware counters */ > DECLARE_BITMAP(used_fw_ctrs, RISCV_MAX_COUNTERS); > + /* The virtual address of the shared memory where counter snapshot will be taken */ > + void *snapshot_addr; > + /* The physical address of the shared memory where counter snapshot will be taken */ > + phys_addr_t snapshot_addr_phys; > + /* Boolean flag to indicate setup is already done */ > + bool snapshot_set_done; Instead of the 'snapshot_set_done' boolean, we can just use snapshot_addr, which can't be NULL after setup. > }; > > struct riscv_pmu { > -- > 2.34.1 > Thanks, drew
On Fri, Mar 1, 2024 at 3:40 PM Andrew Jones <ajones@ventanamicro.com> wrote: > > On Wed, Feb 28, 2024 at 05:01:20PM -0800, Atish Patra wrote: > > SBI v2.0 SBI introduced PMU snapshot feature which adds the following > > features. > > > > 1. Read counter values directly from the shared memory instead of > > csr read. > > 2. Start multiple counters with initial values with one SBI call. > > > > These functionalities optimizes the number of traps to the higher > > privilege mode. If the kernel is in VS mode while the hypervisor > > deploy trap & emulate method, this would minimize all the hpmcounter > > CSR read traps. If the kernel is running in S-mode, the benefits > > reduced to CSR latency vs DRAM/cache latency as there is no trap > > involved while accessing the hpmcounter CSRs. > > > > In both modes, it does saves the number of ecalls while starting > > multiple counter together with an initial values. This is a likely > > scenario if multiple counters overflow at the same time. > > > > Acked-by: Palmer Dabbelt <palmer@rivosinc.com> > > Reviewed-by: Anup Patel <anup@brainfault.org> > > Reviewed-by: Conor Dooley <conor.dooley@microchip.com> > > Signed-off-by: Atish Patra <atishp@rivosinc.com> > > --- > > drivers/perf/riscv_pmu.c | 1 + > > drivers/perf/riscv_pmu_sbi.c | 209 +++++++++++++++++++++++++++++++-- > > include/linux/perf/riscv_pmu.h | 6 + > > 3 files changed, 204 insertions(+), 12 deletions(-) > > > > diff --git a/drivers/perf/riscv_pmu.c b/drivers/perf/riscv_pmu.c > > index 0dda70e1ef90..5b57acb770d3 100644 > > --- a/drivers/perf/riscv_pmu.c > > +++ b/drivers/perf/riscv_pmu.c > > @@ -412,6 +412,7 @@ struct riscv_pmu *riscv_pmu_alloc(void) > > cpuc->n_events = 0; > > for (i = 0; i < RISCV_MAX_COUNTERS; i++) > > cpuc->events[i] = NULL; > > + cpuc->snapshot_addr = NULL; > > } > > pmu->pmu = (struct pmu) { > > .event_init = riscv_pmu_event_init, > > diff --git a/drivers/perf/riscv_pmu_sbi.c b/drivers/perf/riscv_pmu_sbi.c > > index ea0fdb589f0d..8de5721e8019 100644 > > --- a/drivers/perf/riscv_pmu_sbi.c > > +++ b/drivers/perf/riscv_pmu_sbi.c > > @@ -36,6 +36,9 @@ PMU_FORMAT_ATTR(event, "config:0-47"); > > PMU_FORMAT_ATTR(firmware, "config:63"); > > > > static bool sbi_v2_available; > > +static DEFINE_STATIC_KEY_FALSE(sbi_pmu_snapshot_available); > > +#define sbi_pmu_snapshot_available() \ > > + static_branch_unlikely(&sbi_pmu_snapshot_available) > > > > static struct attribute *riscv_arch_formats_attr[] = { > > &format_attr_event.attr, > > @@ -485,14 +488,100 @@ static int pmu_sbi_event_map(struct perf_event *event, u64 *econfig) > > return ret; > > } > > > > +static void pmu_sbi_snapshot_free(struct riscv_pmu *pmu) > > +{ > > + int cpu; > > + > > + for_each_possible_cpu(cpu) { > > + struct cpu_hw_events *cpu_hw_evt = per_cpu_ptr(pmu->hw_events, cpu); > > + > > + if (!cpu_hw_evt->snapshot_addr) > > + continue; > > + > > + free_page((unsigned long)cpu_hw_evt->snapshot_addr); > > + cpu_hw_evt->snapshot_addr = NULL; > > + cpu_hw_evt->snapshot_addr_phys = 0; > > + } > > +} > > + > > +static int pmu_sbi_snapshot_alloc(struct riscv_pmu *pmu) > > +{ > > + int cpu; > > + struct page *snapshot_page; > > + > > + for_each_possible_cpu(cpu) { > > + struct cpu_hw_events *cpu_hw_evt = per_cpu_ptr(pmu->hw_events, cpu); > > + > > + if (cpu_hw_evt->snapshot_addr) > > + continue; > > + > > + snapshot_page = alloc_page(GFP_ATOMIC | __GFP_ZERO); > > + if (!snapshot_page) { > > + pmu_sbi_snapshot_free(pmu); > > + return -ENOMEM; > > + } > > + cpu_hw_evt->snapshot_addr = page_to_virt(snapshot_page); > > + cpu_hw_evt->snapshot_addr_phys = page_to_phys(snapshot_page); > > + } > > + > > + return 0; > > +} > > + > > +static void pmu_sbi_snapshot_disable(void) > > +{ > > + sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_SNAPSHOT_SET_SHMEM, -1, > > + -1, 0, 0, 0, 0); > > +} > > + > > +static int pmu_sbi_snapshot_setup(struct riscv_pmu *pmu, int cpu) > > +{ > > + struct cpu_hw_events *cpu_hw_evt; > > + struct sbiret ret = {0}; > > + > > + cpu_hw_evt = per_cpu_ptr(pmu->hw_events, cpu); > > + if (!cpu_hw_evt->snapshot_addr_phys) > > + return -EINVAL; > > + > > + if (cpu_hw_evt->snapshot_set_done) > > + return 0; > > + > > + if (IS_ENABLED(CONFIG_32BIT)) > > + ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_SNAPSHOT_SET_SHMEM, > > + cpu_hw_evt->snapshot_addr_phys, > > + (u64)(cpu_hw_evt->snapshot_addr_phys) >> 32, 0, 0, 0, 0); > > + else > > + ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_SNAPSHOT_SET_SHMEM, > > + cpu_hw_evt->snapshot_addr_phys, 0, 0, 0, 0, 0); > > + > > + /* Free up the snapshot area memory and fall back to SBI PMU calls without snapshot */ > > + if (ret.error) { > > + if (ret.error != SBI_ERR_NOT_SUPPORTED) > > + pr_warn("pmu snapshot setup failed with error %ld\n", ret.error); > > + return sbi_err_map_linux_errno(ret.error); > > + } > > + > > + cpu_hw_evt->snapshot_set_done = true; > > + > > + return 0; > > +} > > + > > static u64 pmu_sbi_ctr_read(struct perf_event *event) > > { > > struct hw_perf_event *hwc = &event->hw; > > int idx = hwc->idx; > > struct sbiret ret; > > u64 val = 0; > > + struct riscv_pmu *pmu = to_riscv_pmu(event->pmu); > > + struct cpu_hw_events *cpu_hw_evt = this_cpu_ptr(pmu->hw_events); > > + struct riscv_pmu_snapshot_data *sdata = cpu_hw_evt->snapshot_addr; > > union sbi_pmu_ctr_info info = pmu_ctr_list[idx]; > > > > + /* Read the value from the shared memory directly */ > > + if (sbi_pmu_snapshot_available()) { > > + val = sdata->ctr_values[idx]; > > + return val; > > + } > > + > > if (pmu_sbi_is_fw_event(event)) { > > ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_FW_READ, > > hwc->idx, 0, 0, 0, 0, 0); > > @@ -539,6 +628,7 @@ static void pmu_sbi_ctr_start(struct perf_event *event, u64 ival) > > struct hw_perf_event *hwc = &event->hw; > > unsigned long flag = SBI_PMU_START_FLAG_SET_INIT_VALUE; > > > > + /* There is no benefit setting SNAPSHOT FLAG for a single counter */ > > #if defined(CONFIG_32BIT) > > ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_START, hwc->idx, > > 1, flag, ival, ival >> 32, 0); > > @@ -559,16 +649,36 @@ static void pmu_sbi_ctr_stop(struct perf_event *event, unsigned long flag) > > { > > struct sbiret ret; > > struct hw_perf_event *hwc = &event->hw; > > + struct riscv_pmu *pmu = to_riscv_pmu(event->pmu); > > + struct cpu_hw_events *cpu_hw_evt = this_cpu_ptr(pmu->hw_events); > > + struct riscv_pmu_snapshot_data *sdata = cpu_hw_evt->snapshot_addr; > > > > if ((hwc->flags & PERF_EVENT_FLAG_USER_ACCESS) && > > (hwc->flags & PERF_EVENT_FLAG_USER_READ_CNT)) > > pmu_sbi_reset_scounteren((void *)event); > > > > + if (sbi_pmu_snapshot_available()) > > + flag |= SBI_PMU_STOP_FLAG_TAKE_SNAPSHOT; > > + > > ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_STOP, hwc->idx, 1, flag, 0, 0, 0); > > - if (ret.error && (ret.error != SBI_ERR_ALREADY_STOPPED) && > > - flag != SBI_PMU_STOP_FLAG_RESET) > > + if (!ret.error && sbi_pmu_snapshot_available()) { > > + /* > > + * The counter snapshot is based on the index base specified by hwc->idx. > > + * The actual counter value is updated in shared memory at index 0 when counter > > + * mask is 0x01. To ensure accurate counter values, it's necessary to transfer > > + * the counter value to shared memory. However, if hwc->idx is zero, the counter > > + * value is already correctly updated in shared memory, requiring no further > > + * adjustment. > > + */ > > + if (hwc->idx > 0) { > > + sdata->ctr_values[hwc->idx] = sdata->ctr_values[0]; > > + sdata->ctr_values[0] = 0; > > + } > > + } else if (ret.error && (ret.error != SBI_ERR_ALREADY_STOPPED) && > > + flag != SBI_PMU_STOP_FLAG_RESET) { > > pr_err("Stopping counter idx %d failed with error %d\n", > > hwc->idx, sbi_err_map_linux_errno(ret.error)); > > + } > > } > > > > static int pmu_sbi_find_num_ctrs(void) > > @@ -626,10 +736,14 @@ static inline void pmu_sbi_stop_all(struct riscv_pmu *pmu) > > static inline void pmu_sbi_stop_hw_ctrs(struct riscv_pmu *pmu) > > { > > struct cpu_hw_events *cpu_hw_evt = this_cpu_ptr(pmu->hw_events); > > + unsigned long flag = 0; > > + > > + if (sbi_pmu_snapshot_available()) > > + flag = SBI_PMU_STOP_FLAG_TAKE_SNAPSHOT; > > > > /* No need to check the error here as we can't do anything about the error */ > > sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_STOP, 0, > > - cpu_hw_evt->used_hw_ctrs[0], 0, 0, 0, 0); > > + cpu_hw_evt->used_hw_ctrs[0], flag, 0, 0, 0); > > } > > > > /* > > @@ -638,11 +752,10 @@ static inline void pmu_sbi_stop_hw_ctrs(struct riscv_pmu *pmu) > > * while the overflowed counters need to be started with updated initialization > > * value. > > */ > > -static inline void pmu_sbi_start_overflow_mask(struct riscv_pmu *pmu, > > - unsigned long ctr_ovf_mask) > > +static noinline void pmu_sbi_start_ovf_ctrs_sbi(struct cpu_hw_events *cpu_hw_evt, > > + unsigned long ctr_ovf_mask) > > { > > int idx = 0; > > - struct cpu_hw_events *cpu_hw_evt = this_cpu_ptr(pmu->hw_events); > > struct perf_event *event; > > unsigned long flag = SBI_PMU_START_FLAG_SET_INIT_VALUE; > > unsigned long ctr_start_mask = 0; > > @@ -677,6 +790,49 @@ static inline void pmu_sbi_start_overflow_mask(struct riscv_pmu *pmu, > > } > > } > > > > +static noinline void pmu_sbi_start_ovf_ctrs_snapshot(struct cpu_hw_events *cpu_hw_evt, > > + unsigned long ctr_ovf_mask) > > +{ > > + int idx = 0; > > + struct perf_event *event; > > + unsigned long flag = SBI_PMU_START_FLAG_INIT_FROM_SNAPSHOT; > > + u64 max_period, init_val = 0; > > + struct hw_perf_event *hwc; > > + unsigned long ctr_start_mask = 0; > > + struct riscv_pmu_snapshot_data *sdata = cpu_hw_evt->snapshot_addr; > > + > > + for_each_set_bit(idx, cpu_hw_evt->used_hw_ctrs, RISCV_MAX_COUNTERS) { > > + if (ctr_ovf_mask & (1 << idx)) { > > nit: BIT(idx) Maybe more than a nit? It looks like the recent bug that Fei fixed here https://lore.kernel.org/linux-riscv/20240228115425.2613856-1-fei2.wu@intel.com/ > > > + event = cpu_hw_evt->events[idx]; > > + hwc = &event->hw; > > + max_period = riscv_pmu_ctr_get_width_mask(event); > > + init_val = local64_read(&hwc->prev_count) & max_period; > > + sdata->ctr_values[idx] = init_val; > > + } > > + /* > > + * We donot need to update the non-overflow counters the previous > > do not > > > + * value should have been there already. > > + */ > > + } > > + > > + ctr_start_mask = cpu_hw_evt->used_hw_ctrs[0]; > > + > > + /* Start all the counters in a single shot */ > > + sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_START, 0, ctr_start_mask, > > + flag, 0, 0, 0); > > I think we should always loop over all words of used_hw_ctrs[] since it'll > have more than one for riscv32. Hmm, it seems like there are several > places where we don't expect riscv32's second word to be used... > > > +} > > + > > +static void pmu_sbi_start_overflow_mask(struct riscv_pmu *pmu, > > + unsigned long ctr_ovf_mask) > > +{ > > + struct cpu_hw_events *cpu_hw_evt = this_cpu_ptr(pmu->hw_events); > > + > > + if (sbi_pmu_snapshot_available()) > > + pmu_sbi_start_ovf_ctrs_snapshot(cpu_hw_evt, ctr_ovf_mask); > > + else > > + pmu_sbi_start_ovf_ctrs_sbi(cpu_hw_evt, ctr_ovf_mask); > > +} > > + > > static irqreturn_t pmu_sbi_ovf_handler(int irq, void *dev) > > { > > struct perf_sample_data data; > > @@ -690,6 +846,7 @@ static irqreturn_t pmu_sbi_ovf_handler(int irq, void *dev) > > unsigned long overflowed_ctrs = 0; > > struct cpu_hw_events *cpu_hw_evt = dev; > > u64 start_clock = sched_clock(); > > + struct riscv_pmu_snapshot_data *sdata = cpu_hw_evt->snapshot_addr; > > > > if (WARN_ON_ONCE(!cpu_hw_evt)) > > return IRQ_NONE; > > @@ -711,8 +868,10 @@ static irqreturn_t pmu_sbi_ovf_handler(int irq, void *dev) > > pmu_sbi_stop_hw_ctrs(pmu); > > > > /* Overflow status register should only be read after counter are stopped */ > > - ALT_SBI_PMU_OVERFLOW(overflow); > > - > > + if (sbi_pmu_snapshot_available()) > > + overflow = sdata->ctr_overflow_mask; > > + else > > + ALT_SBI_PMU_OVERFLOW(overflow); > > /* > > * Overflow interrupt pending bit should only be cleared after stopping > > * all the counters to avoid any race condition. > > @@ -794,6 +953,9 @@ static int pmu_sbi_starting_cpu(unsigned int cpu, struct hlist_node *node) > > enable_percpu_irq(riscv_pmu_irq, IRQ_TYPE_NONE); > > } > > > > + if (sbi_pmu_snapshot_available()) > > + return pmu_sbi_snapshot_setup(pmu, cpu); > > + > > return 0; > > } > > > > @@ -807,6 +969,9 @@ static int pmu_sbi_dying_cpu(unsigned int cpu, struct hlist_node *node) > > /* Disable all counters access for user mode now */ > > csr_write(CSR_SCOUNTEREN, 0x0); > > > > + if (sbi_pmu_snapshot_available()) > > + pmu_sbi_snapshot_disable(); > > + > > return 0; > > } > > > > @@ -1076,10 +1241,6 @@ static int pmu_sbi_device_probe(struct platform_device *pdev) > > pmu->event_unmapped = pmu_sbi_event_unmapped; > > pmu->csr_index = pmu_sbi_csr_index; > > > > - ret = cpuhp_state_add_instance(CPUHP_AP_PERF_RISCV_STARTING, &pmu->node); > > - if (ret) > > - return ret; > > - > > ret = riscv_pm_pmu_register(pmu); > > if (ret) > > goto out_unregister; > > @@ -1088,8 +1249,32 @@ static int pmu_sbi_device_probe(struct platform_device *pdev) > > if (ret) > > goto out_unregister; > > > > + /* SBI PMU Snapsphot is only available in SBI v2.0 */ > > + if (sbi_v2_available) { > > + ret = pmu_sbi_snapshot_alloc(pmu); > > + if (ret) > > + goto out_unregister; > > + > > + ret = pmu_sbi_snapshot_setup(pmu, smp_processor_id()); > > + if (!ret) { > > + pr_info("SBI PMU snapshot detected\n"); > > + /* > > + * We enable it once here for the boot cpu. If snapshot shmem setup > > + * fails during cpu hotplug process, it will fail to start the cpu > > + * as we can not handle hetergenous PMUs with different snapshot > > + * capability. > > + */ > > + static_branch_enable(&sbi_pmu_snapshot_available); > > + } > > + /* Snapshot is an optional feature. Continue if not available */ > > + } > > + > > register_sysctl("kernel", sbi_pmu_sysctl_table); > > > > + ret = cpuhp_state_add_instance(CPUHP_AP_PERF_RISCV_STARTING, &pmu->node); > > + if (ret) > > + return ret; > > + > > return 0; > > > > out_unregister: > > diff --git a/include/linux/perf/riscv_pmu.h b/include/linux/perf/riscv_pmu.h > > index 43282e22ebe1..c3fa90970042 100644 > > --- a/include/linux/perf/riscv_pmu.h > > +++ b/include/linux/perf/riscv_pmu.h > > @@ -39,6 +39,12 @@ struct cpu_hw_events { > > DECLARE_BITMAP(used_hw_ctrs, RISCV_MAX_COUNTERS); > > /* currently enabled firmware counters */ > > DECLARE_BITMAP(used_fw_ctrs, RISCV_MAX_COUNTERS); > > + /* The virtual address of the shared memory where counter snapshot will be taken */ > > + void *snapshot_addr; > > + /* The physical address of the shared memory where counter snapshot will be taken */ > > + phys_addr_t snapshot_addr_phys; > > + /* Boolean flag to indicate setup is already done */ > > + bool snapshot_set_done; > > Instead of the 'snapshot_set_done' boolean, we can just use > snapshot_addr, which can't be NULL after setup. > > > }; > > > > struct riscv_pmu { > > -- > > 2.34.1 > > > > Thanks, > drew
diff --git a/drivers/perf/riscv_pmu.c b/drivers/perf/riscv_pmu.c index 0dda70e1ef90..5b57acb770d3 100644 --- a/drivers/perf/riscv_pmu.c +++ b/drivers/perf/riscv_pmu.c @@ -412,6 +412,7 @@ struct riscv_pmu *riscv_pmu_alloc(void) cpuc->n_events = 0; for (i = 0; i < RISCV_MAX_COUNTERS; i++) cpuc->events[i] = NULL; + cpuc->snapshot_addr = NULL; } pmu->pmu = (struct pmu) { .event_init = riscv_pmu_event_init, diff --git a/drivers/perf/riscv_pmu_sbi.c b/drivers/perf/riscv_pmu_sbi.c index ea0fdb589f0d..8de5721e8019 100644 --- a/drivers/perf/riscv_pmu_sbi.c +++ b/drivers/perf/riscv_pmu_sbi.c @@ -36,6 +36,9 @@ PMU_FORMAT_ATTR(event, "config:0-47"); PMU_FORMAT_ATTR(firmware, "config:63"); static bool sbi_v2_available; +static DEFINE_STATIC_KEY_FALSE(sbi_pmu_snapshot_available); +#define sbi_pmu_snapshot_available() \ + static_branch_unlikely(&sbi_pmu_snapshot_available) static struct attribute *riscv_arch_formats_attr[] = { &format_attr_event.attr, @@ -485,14 +488,100 @@ static int pmu_sbi_event_map(struct perf_event *event, u64 *econfig) return ret; } +static void pmu_sbi_snapshot_free(struct riscv_pmu *pmu) +{ + int cpu; + + for_each_possible_cpu(cpu) { + struct cpu_hw_events *cpu_hw_evt = per_cpu_ptr(pmu->hw_events, cpu); + + if (!cpu_hw_evt->snapshot_addr) + continue; + + free_page((unsigned long)cpu_hw_evt->snapshot_addr); + cpu_hw_evt->snapshot_addr = NULL; + cpu_hw_evt->snapshot_addr_phys = 0; + } +} + +static int pmu_sbi_snapshot_alloc(struct riscv_pmu *pmu) +{ + int cpu; + struct page *snapshot_page; + + for_each_possible_cpu(cpu) { + struct cpu_hw_events *cpu_hw_evt = per_cpu_ptr(pmu->hw_events, cpu); + + if (cpu_hw_evt->snapshot_addr) + continue; + + snapshot_page = alloc_page(GFP_ATOMIC | __GFP_ZERO); + if (!snapshot_page) { + pmu_sbi_snapshot_free(pmu); + return -ENOMEM; + } + cpu_hw_evt->snapshot_addr = page_to_virt(snapshot_page); + cpu_hw_evt->snapshot_addr_phys = page_to_phys(snapshot_page); + } + + return 0; +} + +static void pmu_sbi_snapshot_disable(void) +{ + sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_SNAPSHOT_SET_SHMEM, -1, + -1, 0, 0, 0, 0); +} + +static int pmu_sbi_snapshot_setup(struct riscv_pmu *pmu, int cpu) +{ + struct cpu_hw_events *cpu_hw_evt; + struct sbiret ret = {0}; + + cpu_hw_evt = per_cpu_ptr(pmu->hw_events, cpu); + if (!cpu_hw_evt->snapshot_addr_phys) + return -EINVAL; + + if (cpu_hw_evt->snapshot_set_done) + return 0; + + if (IS_ENABLED(CONFIG_32BIT)) + ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_SNAPSHOT_SET_SHMEM, + cpu_hw_evt->snapshot_addr_phys, + (u64)(cpu_hw_evt->snapshot_addr_phys) >> 32, 0, 0, 0, 0); + else + ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_SNAPSHOT_SET_SHMEM, + cpu_hw_evt->snapshot_addr_phys, 0, 0, 0, 0, 0); + + /* Free up the snapshot area memory and fall back to SBI PMU calls without snapshot */ + if (ret.error) { + if (ret.error != SBI_ERR_NOT_SUPPORTED) + pr_warn("pmu snapshot setup failed with error %ld\n", ret.error); + return sbi_err_map_linux_errno(ret.error); + } + + cpu_hw_evt->snapshot_set_done = true; + + return 0; +} + static u64 pmu_sbi_ctr_read(struct perf_event *event) { struct hw_perf_event *hwc = &event->hw; int idx = hwc->idx; struct sbiret ret; u64 val = 0; + struct riscv_pmu *pmu = to_riscv_pmu(event->pmu); + struct cpu_hw_events *cpu_hw_evt = this_cpu_ptr(pmu->hw_events); + struct riscv_pmu_snapshot_data *sdata = cpu_hw_evt->snapshot_addr; union sbi_pmu_ctr_info info = pmu_ctr_list[idx]; + /* Read the value from the shared memory directly */ + if (sbi_pmu_snapshot_available()) { + val = sdata->ctr_values[idx]; + return val; + } + if (pmu_sbi_is_fw_event(event)) { ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_FW_READ, hwc->idx, 0, 0, 0, 0, 0); @@ -539,6 +628,7 @@ static void pmu_sbi_ctr_start(struct perf_event *event, u64 ival) struct hw_perf_event *hwc = &event->hw; unsigned long flag = SBI_PMU_START_FLAG_SET_INIT_VALUE; + /* There is no benefit setting SNAPSHOT FLAG for a single counter */ #if defined(CONFIG_32BIT) ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_START, hwc->idx, 1, flag, ival, ival >> 32, 0); @@ -559,16 +649,36 @@ static void pmu_sbi_ctr_stop(struct perf_event *event, unsigned long flag) { struct sbiret ret; struct hw_perf_event *hwc = &event->hw; + struct riscv_pmu *pmu = to_riscv_pmu(event->pmu); + struct cpu_hw_events *cpu_hw_evt = this_cpu_ptr(pmu->hw_events); + struct riscv_pmu_snapshot_data *sdata = cpu_hw_evt->snapshot_addr; if ((hwc->flags & PERF_EVENT_FLAG_USER_ACCESS) && (hwc->flags & PERF_EVENT_FLAG_USER_READ_CNT)) pmu_sbi_reset_scounteren((void *)event); + if (sbi_pmu_snapshot_available()) + flag |= SBI_PMU_STOP_FLAG_TAKE_SNAPSHOT; + ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_STOP, hwc->idx, 1, flag, 0, 0, 0); - if (ret.error && (ret.error != SBI_ERR_ALREADY_STOPPED) && - flag != SBI_PMU_STOP_FLAG_RESET) + if (!ret.error && sbi_pmu_snapshot_available()) { + /* + * The counter snapshot is based on the index base specified by hwc->idx. + * The actual counter value is updated in shared memory at index 0 when counter + * mask is 0x01. To ensure accurate counter values, it's necessary to transfer + * the counter value to shared memory. However, if hwc->idx is zero, the counter + * value is already correctly updated in shared memory, requiring no further + * adjustment. + */ + if (hwc->idx > 0) { + sdata->ctr_values[hwc->idx] = sdata->ctr_values[0]; + sdata->ctr_values[0] = 0; + } + } else if (ret.error && (ret.error != SBI_ERR_ALREADY_STOPPED) && + flag != SBI_PMU_STOP_FLAG_RESET) { pr_err("Stopping counter idx %d failed with error %d\n", hwc->idx, sbi_err_map_linux_errno(ret.error)); + } } static int pmu_sbi_find_num_ctrs(void) @@ -626,10 +736,14 @@ static inline void pmu_sbi_stop_all(struct riscv_pmu *pmu) static inline void pmu_sbi_stop_hw_ctrs(struct riscv_pmu *pmu) { struct cpu_hw_events *cpu_hw_evt = this_cpu_ptr(pmu->hw_events); + unsigned long flag = 0; + + if (sbi_pmu_snapshot_available()) + flag = SBI_PMU_STOP_FLAG_TAKE_SNAPSHOT; /* No need to check the error here as we can't do anything about the error */ sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_STOP, 0, - cpu_hw_evt->used_hw_ctrs[0], 0, 0, 0, 0); + cpu_hw_evt->used_hw_ctrs[0], flag, 0, 0, 0); } /* @@ -638,11 +752,10 @@ static inline void pmu_sbi_stop_hw_ctrs(struct riscv_pmu *pmu) * while the overflowed counters need to be started with updated initialization * value. */ -static inline void pmu_sbi_start_overflow_mask(struct riscv_pmu *pmu, - unsigned long ctr_ovf_mask) +static noinline void pmu_sbi_start_ovf_ctrs_sbi(struct cpu_hw_events *cpu_hw_evt, + unsigned long ctr_ovf_mask) { int idx = 0; - struct cpu_hw_events *cpu_hw_evt = this_cpu_ptr(pmu->hw_events); struct perf_event *event; unsigned long flag = SBI_PMU_START_FLAG_SET_INIT_VALUE; unsigned long ctr_start_mask = 0; @@ -677,6 +790,49 @@ static inline void pmu_sbi_start_overflow_mask(struct riscv_pmu *pmu, } } +static noinline void pmu_sbi_start_ovf_ctrs_snapshot(struct cpu_hw_events *cpu_hw_evt, + unsigned long ctr_ovf_mask) +{ + int idx = 0; + struct perf_event *event; + unsigned long flag = SBI_PMU_START_FLAG_INIT_FROM_SNAPSHOT; + u64 max_period, init_val = 0; + struct hw_perf_event *hwc; + unsigned long ctr_start_mask = 0; + struct riscv_pmu_snapshot_data *sdata = cpu_hw_evt->snapshot_addr; + + for_each_set_bit(idx, cpu_hw_evt->used_hw_ctrs, RISCV_MAX_COUNTERS) { + if (ctr_ovf_mask & (1 << idx)) { + event = cpu_hw_evt->events[idx]; + hwc = &event->hw; + max_period = riscv_pmu_ctr_get_width_mask(event); + init_val = local64_read(&hwc->prev_count) & max_period; + sdata->ctr_values[idx] = init_val; + } + /* + * We donot need to update the non-overflow counters the previous + * value should have been there already. + */ + } + + ctr_start_mask = cpu_hw_evt->used_hw_ctrs[0]; + + /* Start all the counters in a single shot */ + sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_START, 0, ctr_start_mask, + flag, 0, 0, 0); +} + +static void pmu_sbi_start_overflow_mask(struct riscv_pmu *pmu, + unsigned long ctr_ovf_mask) +{ + struct cpu_hw_events *cpu_hw_evt = this_cpu_ptr(pmu->hw_events); + + if (sbi_pmu_snapshot_available()) + pmu_sbi_start_ovf_ctrs_snapshot(cpu_hw_evt, ctr_ovf_mask); + else + pmu_sbi_start_ovf_ctrs_sbi(cpu_hw_evt, ctr_ovf_mask); +} + static irqreturn_t pmu_sbi_ovf_handler(int irq, void *dev) { struct perf_sample_data data; @@ -690,6 +846,7 @@ static irqreturn_t pmu_sbi_ovf_handler(int irq, void *dev) unsigned long overflowed_ctrs = 0; struct cpu_hw_events *cpu_hw_evt = dev; u64 start_clock = sched_clock(); + struct riscv_pmu_snapshot_data *sdata = cpu_hw_evt->snapshot_addr; if (WARN_ON_ONCE(!cpu_hw_evt)) return IRQ_NONE; @@ -711,8 +868,10 @@ static irqreturn_t pmu_sbi_ovf_handler(int irq, void *dev) pmu_sbi_stop_hw_ctrs(pmu); /* Overflow status register should only be read after counter are stopped */ - ALT_SBI_PMU_OVERFLOW(overflow); - + if (sbi_pmu_snapshot_available()) + overflow = sdata->ctr_overflow_mask; + else + ALT_SBI_PMU_OVERFLOW(overflow); /* * Overflow interrupt pending bit should only be cleared after stopping * all the counters to avoid any race condition. @@ -794,6 +953,9 @@ static int pmu_sbi_starting_cpu(unsigned int cpu, struct hlist_node *node) enable_percpu_irq(riscv_pmu_irq, IRQ_TYPE_NONE); } + if (sbi_pmu_snapshot_available()) + return pmu_sbi_snapshot_setup(pmu, cpu); + return 0; } @@ -807,6 +969,9 @@ static int pmu_sbi_dying_cpu(unsigned int cpu, struct hlist_node *node) /* Disable all counters access for user mode now */ csr_write(CSR_SCOUNTEREN, 0x0); + if (sbi_pmu_snapshot_available()) + pmu_sbi_snapshot_disable(); + return 0; } @@ -1076,10 +1241,6 @@ static int pmu_sbi_device_probe(struct platform_device *pdev) pmu->event_unmapped = pmu_sbi_event_unmapped; pmu->csr_index = pmu_sbi_csr_index; - ret = cpuhp_state_add_instance(CPUHP_AP_PERF_RISCV_STARTING, &pmu->node); - if (ret) - return ret; - ret = riscv_pm_pmu_register(pmu); if (ret) goto out_unregister; @@ -1088,8 +1249,32 @@ static int pmu_sbi_device_probe(struct platform_device *pdev) if (ret) goto out_unregister; + /* SBI PMU Snapsphot is only available in SBI v2.0 */ + if (sbi_v2_available) { + ret = pmu_sbi_snapshot_alloc(pmu); + if (ret) + goto out_unregister; + + ret = pmu_sbi_snapshot_setup(pmu, smp_processor_id()); + if (!ret) { + pr_info("SBI PMU snapshot detected\n"); + /* + * We enable it once here for the boot cpu. If snapshot shmem setup + * fails during cpu hotplug process, it will fail to start the cpu + * as we can not handle hetergenous PMUs with different snapshot + * capability. + */ + static_branch_enable(&sbi_pmu_snapshot_available); + } + /* Snapshot is an optional feature. Continue if not available */ + } + register_sysctl("kernel", sbi_pmu_sysctl_table); + ret = cpuhp_state_add_instance(CPUHP_AP_PERF_RISCV_STARTING, &pmu->node); + if (ret) + return ret; + return 0; out_unregister: diff --git a/include/linux/perf/riscv_pmu.h b/include/linux/perf/riscv_pmu.h index 43282e22ebe1..c3fa90970042 100644 --- a/include/linux/perf/riscv_pmu.h +++ b/include/linux/perf/riscv_pmu.h @@ -39,6 +39,12 @@ struct cpu_hw_events { DECLARE_BITMAP(used_hw_ctrs, RISCV_MAX_COUNTERS); /* currently enabled firmware counters */ DECLARE_BITMAP(used_fw_ctrs, RISCV_MAX_COUNTERS); + /* The virtual address of the shared memory where counter snapshot will be taken */ + void *snapshot_addr; + /* The physical address of the shared memory where counter snapshot will be taken */ + phys_addr_t snapshot_addr_phys; + /* Boolean flag to indicate setup is already done */ + bool snapshot_set_done; }; struct riscv_pmu {