| Message ID | 20240229010130.1380926-13-atishp@rivosinc.com |
|---|---|
| State | Changes Requested |
| Headers | show |
| Series | RISC-V SBI v2.0 PMU improvements and Perf sampling in KVM guest | expand |
On Thu, Feb 29, 2024 at 6:32 AM Atish Patra <atishp@rivosinc.com> wrote: > > The SBI PMU extension definition is required for upcoming SBI PMU > selftests. > > Signed-off-by: Atish Patra <atishp@rivosinc.com> LGTM. Reviewed-by: Anup Patel <anup@brainfault.org> Regards, Anup > --- > .../selftests/kvm/include/riscv/processor.h | 67 +++++++++++++++++++ > 1 file changed, 67 insertions(+) > > diff --git a/tools/testing/selftests/kvm/include/riscv/processor.h b/tools/testing/selftests/kvm/include/riscv/processor.h > index f75c381fa35a..a49a39c8e8d4 100644 > --- a/tools/testing/selftests/kvm/include/riscv/processor.h > +++ b/tools/testing/selftests/kvm/include/riscv/processor.h > @@ -169,17 +169,84 @@ void vm_install_exception_handler(struct kvm_vm *vm, int vector, exception_handl > enum sbi_ext_id { > SBI_EXT_BASE = 0x10, > SBI_EXT_STA = 0x535441, > + SBI_EXT_PMU = 0x504D55, > }; > > enum sbi_ext_base_fid { > SBI_EXT_BASE_PROBE_EXT = 3, > }; > > +enum sbi_ext_pmu_fid { > + SBI_EXT_PMU_NUM_COUNTERS = 0, > + SBI_EXT_PMU_COUNTER_GET_INFO, > + SBI_EXT_PMU_COUNTER_CFG_MATCH, > + SBI_EXT_PMU_COUNTER_START, > + SBI_EXT_PMU_COUNTER_STOP, > + SBI_EXT_PMU_COUNTER_FW_READ, > + SBI_EXT_PMU_COUNTER_FW_READ_HI, > + SBI_EXT_PMU_SNAPSHOT_SET_SHMEM, > +}; > + > +union sbi_pmu_ctr_info { > + unsigned long value; > + struct { > + unsigned long csr:12; > + unsigned long width:6; > +#if __riscv_xlen == 32 > + unsigned long reserved:13; > +#else > + unsigned long reserved:45; > +#endif > + unsigned long type:1; > + }; > +}; > + > struct sbiret { > long error; > long value; > }; > > +/** General pmu event codes specified in SBI PMU extension */ > +enum sbi_pmu_hw_generic_events_t { > + SBI_PMU_HW_NO_EVENT = 0, > + SBI_PMU_HW_CPU_CYCLES = 1, > + SBI_PMU_HW_INSTRUCTIONS = 2, > + SBI_PMU_HW_CACHE_REFERENCES = 3, > + SBI_PMU_HW_CACHE_MISSES = 4, > + SBI_PMU_HW_BRANCH_INSTRUCTIONS = 5, > + SBI_PMU_HW_BRANCH_MISSES = 6, > + SBI_PMU_HW_BUS_CYCLES = 7, > + SBI_PMU_HW_STALLED_CYCLES_FRONTEND = 8, > + SBI_PMU_HW_STALLED_CYCLES_BACKEND = 9, > + SBI_PMU_HW_REF_CPU_CYCLES = 10, > + > + SBI_PMU_HW_GENERAL_MAX, > +}; > + > +/* SBI PMU counter types */ > +enum sbi_pmu_ctr_type { > + SBI_PMU_CTR_TYPE_HW = 0x0, > + SBI_PMU_CTR_TYPE_FW, > +}; > + > +/* Flags defined for config matching function */ > +#define SBI_PMU_CFG_FLAG_SKIP_MATCH (1 << 0) > +#define SBI_PMU_CFG_FLAG_CLEAR_VALUE (1 << 1) > +#define SBI_PMU_CFG_FLAG_AUTO_START (1 << 2) > +#define SBI_PMU_CFG_FLAG_SET_VUINH (1 << 3) > +#define SBI_PMU_CFG_FLAG_SET_VSINH (1 << 4) > +#define SBI_PMU_CFG_FLAG_SET_UINH (1 << 5) > +#define SBI_PMU_CFG_FLAG_SET_SINH (1 << 6) > +#define SBI_PMU_CFG_FLAG_SET_MINH (1 << 7) > + > +/* Flags defined for counter start function */ > +#define SBI_PMU_START_FLAG_SET_INIT_VALUE (1 << 0) > +#define SBI_PMU_START_FLAG_INIT_FROM_SNAPSHOT BIT(1) > + > +/* Flags defined for counter stop function */ > +#define SBI_PMU_STOP_FLAG_RESET (1 << 0) > +#define SBI_PMU_STOP_FLAG_TAKE_SNAPSHOT BIT(1) > + > struct sbiret sbi_ecall(int ext, int fid, unsigned long arg0, > unsigned long arg1, unsigned long arg2, > unsigned long arg3, unsigned long arg4, > -- > 2.34.1 >
On Wed, Feb 28, 2024 at 05:01:27PM -0800, Atish Patra wrote: > The SBI PMU extension definition is required for upcoming SBI PMU > selftests. > > Signed-off-by: Atish Patra <atishp@rivosinc.com> > --- > .../selftests/kvm/include/riscv/processor.h | 67 +++++++++++++++++++ > 1 file changed, 67 insertions(+) > > diff --git a/tools/testing/selftests/kvm/include/riscv/processor.h b/tools/testing/selftests/kvm/include/riscv/processor.h > index f75c381fa35a..a49a39c8e8d4 100644 > --- a/tools/testing/selftests/kvm/include/riscv/processor.h > +++ b/tools/testing/selftests/kvm/include/riscv/processor.h We should probably create a new header (include/riscv/sbi.h) since otherwise processor.h is very quickly going to look like an SBI header with a few non-sbi things in it. Can we add a patch prior to this one that moves the SBI stuff we currently have in processor.h out to an sbi.h? Or, we could start synchronizing a copy of arch/riscv/include/asm/sbi.h in tools/arch/riscv/include/asm like we've done for csr.h > @@ -169,17 +169,84 @@ void vm_install_exception_handler(struct kvm_vm *vm, int vector, exception_handl > enum sbi_ext_id { > SBI_EXT_BASE = 0x10, > SBI_EXT_STA = 0x535441, > + SBI_EXT_PMU = 0x504D55, > }; > > enum sbi_ext_base_fid { > SBI_EXT_BASE_PROBE_EXT = 3, > }; > > +enum sbi_ext_pmu_fid { > + SBI_EXT_PMU_NUM_COUNTERS = 0, > + SBI_EXT_PMU_COUNTER_GET_INFO, > + SBI_EXT_PMU_COUNTER_CFG_MATCH, > + SBI_EXT_PMU_COUNTER_START, > + SBI_EXT_PMU_COUNTER_STOP, > + SBI_EXT_PMU_COUNTER_FW_READ, > + SBI_EXT_PMU_COUNTER_FW_READ_HI, > + SBI_EXT_PMU_SNAPSHOT_SET_SHMEM, > +}; > + > +union sbi_pmu_ctr_info { > + unsigned long value; > + struct { > + unsigned long csr:12; > + unsigned long width:6; > +#if __riscv_xlen == 32 > + unsigned long reserved:13; > +#else > + unsigned long reserved:45; > +#endif > + unsigned long type:1; > + }; > +}; > + > struct sbiret { > long error; > long value; > }; > > +/** General pmu event codes specified in SBI PMU extension */ > +enum sbi_pmu_hw_generic_events_t { > + SBI_PMU_HW_NO_EVENT = 0, > + SBI_PMU_HW_CPU_CYCLES = 1, > + SBI_PMU_HW_INSTRUCTIONS = 2, > + SBI_PMU_HW_CACHE_REFERENCES = 3, > + SBI_PMU_HW_CACHE_MISSES = 4, > + SBI_PMU_HW_BRANCH_INSTRUCTIONS = 5, > + SBI_PMU_HW_BRANCH_MISSES = 6, > + SBI_PMU_HW_BUS_CYCLES = 7, > + SBI_PMU_HW_STALLED_CYCLES_FRONTEND = 8, > + SBI_PMU_HW_STALLED_CYCLES_BACKEND = 9, > + SBI_PMU_HW_REF_CPU_CYCLES = 10, > + > + SBI_PMU_HW_GENERAL_MAX, > +}; > + > +/* SBI PMU counter types */ > +enum sbi_pmu_ctr_type { > + SBI_PMU_CTR_TYPE_HW = 0x0, > + SBI_PMU_CTR_TYPE_FW, > +}; > + > +/* Flags defined for config matching function */ > +#define SBI_PMU_CFG_FLAG_SKIP_MATCH (1 << 0) > +#define SBI_PMU_CFG_FLAG_CLEAR_VALUE (1 << 1) > +#define SBI_PMU_CFG_FLAG_AUTO_START (1 << 2) > +#define SBI_PMU_CFG_FLAG_SET_VUINH (1 << 3) > +#define SBI_PMU_CFG_FLAG_SET_VSINH (1 << 4) > +#define SBI_PMU_CFG_FLAG_SET_UINH (1 << 5) > +#define SBI_PMU_CFG_FLAG_SET_SINH (1 << 6) > +#define SBI_PMU_CFG_FLAG_SET_MINH (1 << 7) > + > +/* Flags defined for counter start function */ > +#define SBI_PMU_START_FLAG_SET_INIT_VALUE (1 << 0) > +#define SBI_PMU_START_FLAG_INIT_FROM_SNAPSHOT BIT(1) > + > +/* Flags defined for counter stop function */ > +#define SBI_PMU_STOP_FLAG_RESET (1 << 0) > +#define SBI_PMU_STOP_FLAG_TAKE_SNAPSHOT BIT(1) When changing shifts to BIT()'s, don't forget these (easy not to forget if we go with the synch sbi.h to tools approach) > + > struct sbiret sbi_ecall(int ext, int fid, unsigned long arg0, > unsigned long arg1, unsigned long arg2, > unsigned long arg3, unsigned long arg4, > -- > 2.34.1 > Thanks, drew
On 3/2/24 03:00, Andrew Jones wrote: > On Wed, Feb 28, 2024 at 05:01:27PM -0800, Atish Patra wrote: >> The SBI PMU extension definition is required for upcoming SBI PMU >> selftests. >> >> Signed-off-by: Atish Patra <atishp@rivosinc.com> >> --- >> .../selftests/kvm/include/riscv/processor.h | 67 +++++++++++++++++++ >> 1 file changed, 67 insertions(+) >> >> diff --git a/tools/testing/selftests/kvm/include/riscv/processor.h b/tools/testing/selftests/kvm/include/riscv/processor.h >> index f75c381fa35a..a49a39c8e8d4 100644 >> --- a/tools/testing/selftests/kvm/include/riscv/processor.h >> +++ b/tools/testing/selftests/kvm/include/riscv/processor.h > > We should probably create a new header (include/riscv/sbi.h) since > otherwise processor.h is very quickly going to look like an SBI > header with a few non-sbi things in it. Can we add a patch prior to > this one that moves the SBI stuff we currently have in processor.h > out to an sbi.h? Or, we could start synchronizing a copy of > arch/riscv/include/asm/sbi.h in tools/arch/riscv/include/asm like > we've done for csr.h > A separate sbi.h makes sense. I have moved the definitions to sbi.h as of now. There is still lot more changes in sbi.h which is not required for selftests even after this patch. But I am okay with syncing with sbi.h But I am not sure what should be the synchronization policy for sbi.h. As needed or regular sync with after every release? The csr.h is already out of date even though it was created last MW (one change is part of this series). Let me know if you have any thoughts about that. I can send another version with that. >> @@ -169,17 +169,84 @@ void vm_install_exception_handler(struct kvm_vm *vm, int vector, exception_handl >> enum sbi_ext_id { >> SBI_EXT_BASE = 0x10, >> SBI_EXT_STA = 0x535441, >> + SBI_EXT_PMU = 0x504D55, >> }; >> >> enum sbi_ext_base_fid { >> SBI_EXT_BASE_PROBE_EXT = 3, >> }; >> >> +enum sbi_ext_pmu_fid { >> + SBI_EXT_PMU_NUM_COUNTERS = 0, >> + SBI_EXT_PMU_COUNTER_GET_INFO, >> + SBI_EXT_PMU_COUNTER_CFG_MATCH, >> + SBI_EXT_PMU_COUNTER_START, >> + SBI_EXT_PMU_COUNTER_STOP, >> + SBI_EXT_PMU_COUNTER_FW_READ, >> + SBI_EXT_PMU_COUNTER_FW_READ_HI, >> + SBI_EXT_PMU_SNAPSHOT_SET_SHMEM, >> +}; >> + >> +union sbi_pmu_ctr_info { >> + unsigned long value; >> + struct { >> + unsigned long csr:12; >> + unsigned long width:6; >> +#if __riscv_xlen == 32 >> + unsigned long reserved:13; >> +#else >> + unsigned long reserved:45; >> +#endif >> + unsigned long type:1; >> + }; >> +}; >> + >> struct sbiret { >> long error; >> long value; >> }; >> >> +/** General pmu event codes specified in SBI PMU extension */ >> +enum sbi_pmu_hw_generic_events_t { >> + SBI_PMU_HW_NO_EVENT = 0, >> + SBI_PMU_HW_CPU_CYCLES = 1, >> + SBI_PMU_HW_INSTRUCTIONS = 2, >> + SBI_PMU_HW_CACHE_REFERENCES = 3, >> + SBI_PMU_HW_CACHE_MISSES = 4, >> + SBI_PMU_HW_BRANCH_INSTRUCTIONS = 5, >> + SBI_PMU_HW_BRANCH_MISSES = 6, >> + SBI_PMU_HW_BUS_CYCLES = 7, >> + SBI_PMU_HW_STALLED_CYCLES_FRONTEND = 8, >> + SBI_PMU_HW_STALLED_CYCLES_BACKEND = 9, >> + SBI_PMU_HW_REF_CPU_CYCLES = 10, >> + >> + SBI_PMU_HW_GENERAL_MAX, >> +}; >> + >> +/* SBI PMU counter types */ >> +enum sbi_pmu_ctr_type { >> + SBI_PMU_CTR_TYPE_HW = 0x0, >> + SBI_PMU_CTR_TYPE_FW, >> +}; >> + >> +/* Flags defined for config matching function */ >> +#define SBI_PMU_CFG_FLAG_SKIP_MATCH (1 << 0) >> +#define SBI_PMU_CFG_FLAG_CLEAR_VALUE (1 << 1) >> +#define SBI_PMU_CFG_FLAG_AUTO_START (1 << 2) >> +#define SBI_PMU_CFG_FLAG_SET_VUINH (1 << 3) >> +#define SBI_PMU_CFG_FLAG_SET_VSINH (1 << 4) >> +#define SBI_PMU_CFG_FLAG_SET_UINH (1 << 5) >> +#define SBI_PMU_CFG_FLAG_SET_SINH (1 << 6) >> +#define SBI_PMU_CFG_FLAG_SET_MINH (1 << 7) >> + >> +/* Flags defined for counter start function */ >> +#define SBI_PMU_START_FLAG_SET_INIT_VALUE (1 << 0) >> +#define SBI_PMU_START_FLAG_INIT_FROM_SNAPSHOT BIT(1) >> + >> +/* Flags defined for counter stop function */ >> +#define SBI_PMU_STOP_FLAG_RESET (1 << 0) >> +#define SBI_PMU_STOP_FLAG_TAKE_SNAPSHOT BIT(1) > > When changing shifts to BIT()'s, don't forget these (easy not to forget > if we go with the synch sbi.h to tools approach) > >> + >> struct sbiret sbi_ecall(int ext, int fid, unsigned long arg0, >> unsigned long arg1, unsigned long arg2, >> unsigned long arg3, unsigned long arg4, >> -- >> 2.34.1 >> > > Thanks, > drew
diff --git a/tools/testing/selftests/kvm/include/riscv/processor.h b/tools/testing/selftests/kvm/include/riscv/processor.h index f75c381fa35a..a49a39c8e8d4 100644 --- a/tools/testing/selftests/kvm/include/riscv/processor.h +++ b/tools/testing/selftests/kvm/include/riscv/processor.h @@ -169,17 +169,84 @@ void vm_install_exception_handler(struct kvm_vm *vm, int vector, exception_handl enum sbi_ext_id { SBI_EXT_BASE = 0x10, SBI_EXT_STA = 0x535441, + SBI_EXT_PMU = 0x504D55, }; enum sbi_ext_base_fid { SBI_EXT_BASE_PROBE_EXT = 3, }; +enum sbi_ext_pmu_fid { + SBI_EXT_PMU_NUM_COUNTERS = 0, + SBI_EXT_PMU_COUNTER_GET_INFO, + SBI_EXT_PMU_COUNTER_CFG_MATCH, + SBI_EXT_PMU_COUNTER_START, + SBI_EXT_PMU_COUNTER_STOP, + SBI_EXT_PMU_COUNTER_FW_READ, + SBI_EXT_PMU_COUNTER_FW_READ_HI, + SBI_EXT_PMU_SNAPSHOT_SET_SHMEM, +}; + +union sbi_pmu_ctr_info { + unsigned long value; + struct { + unsigned long csr:12; + unsigned long width:6; +#if __riscv_xlen == 32 + unsigned long reserved:13; +#else + unsigned long reserved:45; +#endif + unsigned long type:1; + }; +}; + struct sbiret { long error; long value; }; +/** General pmu event codes specified in SBI PMU extension */ +enum sbi_pmu_hw_generic_events_t { + SBI_PMU_HW_NO_EVENT = 0, + SBI_PMU_HW_CPU_CYCLES = 1, + SBI_PMU_HW_INSTRUCTIONS = 2, + SBI_PMU_HW_CACHE_REFERENCES = 3, + SBI_PMU_HW_CACHE_MISSES = 4, + SBI_PMU_HW_BRANCH_INSTRUCTIONS = 5, + SBI_PMU_HW_BRANCH_MISSES = 6, + SBI_PMU_HW_BUS_CYCLES = 7, + SBI_PMU_HW_STALLED_CYCLES_FRONTEND = 8, + SBI_PMU_HW_STALLED_CYCLES_BACKEND = 9, + SBI_PMU_HW_REF_CPU_CYCLES = 10, + + SBI_PMU_HW_GENERAL_MAX, +}; + +/* SBI PMU counter types */ +enum sbi_pmu_ctr_type { + SBI_PMU_CTR_TYPE_HW = 0x0, + SBI_PMU_CTR_TYPE_FW, +}; + +/* Flags defined for config matching function */ +#define SBI_PMU_CFG_FLAG_SKIP_MATCH (1 << 0) +#define SBI_PMU_CFG_FLAG_CLEAR_VALUE (1 << 1) +#define SBI_PMU_CFG_FLAG_AUTO_START (1 << 2) +#define SBI_PMU_CFG_FLAG_SET_VUINH (1 << 3) +#define SBI_PMU_CFG_FLAG_SET_VSINH (1 << 4) +#define SBI_PMU_CFG_FLAG_SET_UINH (1 << 5) +#define SBI_PMU_CFG_FLAG_SET_SINH (1 << 6) +#define SBI_PMU_CFG_FLAG_SET_MINH (1 << 7) + +/* Flags defined for counter start function */ +#define SBI_PMU_START_FLAG_SET_INIT_VALUE (1 << 0) +#define SBI_PMU_START_FLAG_INIT_FROM_SNAPSHOT BIT(1) + +/* Flags defined for counter stop function */ +#define SBI_PMU_STOP_FLAG_RESET (1 << 0) +#define SBI_PMU_STOP_FLAG_TAKE_SNAPSHOT BIT(1) + struct sbiret sbi_ecall(int ext, int fid, unsigned long arg0, unsigned long arg1, unsigned long arg2, unsigned long arg3, unsigned long arg4,
The SBI PMU extension definition is required for upcoming SBI PMU selftests. Signed-off-by: Atish Patra <atishp@rivosinc.com> --- .../selftests/kvm/include/riscv/processor.h | 67 +++++++++++++++++++ 1 file changed, 67 insertions(+)