new file mode 100644
@@ -0,0 +1,126 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/melexis,mlx7502x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Melexis ToF 7502x MIPI CSI-2 Sensor
+
+maintainers:
+ - Volodymyr Kharuk <vkh@melexis.com>
+
+description: |-
+ Melexis ToF 7502x sensors has a CSI-2 output. It supports 2 and 4 lanes,
+ and mipi speeds are 300, 600, 704, 800, 904, 960Mbs. Supported format is RAW12.
+ Sensor 75026 is QVGA, while 75027 is VGA sensor.
+
+properties:
+ compatible:
+ enum:
+ - melexis,mlx75026
+ - melexis,mlx75027
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ description: Clock frequency 8MHz
+ maxItems: 1
+
+ vdda-supply:
+ description:
+ Analog power supply(2.7V).
+
+ vddif-supply:
+ description:
+ Interface power supply(1.8V).
+
+ vddd-supply:
+ description:
+ Digital power supply(1.2V).
+
+ vdmix-supply:
+ description:
+ Mixed driver power supply(1.2V).
+
+ reset-gpios:
+ maxItems: 1
+ description: Reset Sensor GPIO Control (active low)
+
+ port:
+ description: MIPI CSI-2 transmitter port
+ $ref: /schemas/graph.yaml#/$defs/port-base
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ oneOf:
+ - items:
+ - const: 1
+ - const: 2
+ - items:
+ - const: 1
+ - const: 2
+ - const: 3
+ - const: 4
+
+ required:
+ - data-lanes
+ - link-frequencies
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - port
+ - vdda-supply
+ - vddif-supply
+ - vddd-supply
+ - vdmix-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mlx7502x: camera@57 {
+ compatible = "melexis,mlx75027";
+ reg = <0x57>;
+ clocks = <&mlx7502x_clk>;
+
+ assigned-clocks = <&mlx7502x_clk>;
+ assigned-clock-parents = <&mlx7502x_clk_parent>;
+ assigned-clock-rates = <8000000>;
+
+ vdda-supply = <®_2v7>;
+ vddif-supply = <®_1v8>;
+ vddd-supply = <®_1v2>;
+ vdmix-supply = <®_1v2>;
+
+ reset-gpios = <&gpio_exp 6 GPIO_ACTIVE_HIGH>;
+
+ port {
+ mlx7502x_out_mipi_csi2: endpoint {
+ remote-endpoint = <&mipi_csi2_from_mlx7502x>;
+ data-lanes = <1 2 3 4>;
+ link-frequencies = /bits/ 64 < 960000000
+ 904000000
+ 800000000
+ 704000000
+ 600000000
+ 300000000 >;
+ };
+ };
+ };
+ };
+
+...
@@ -13116,6 +13116,7 @@ M: Volodymyr Kharuk <vkh@melexis.com>
L: linux-media@vger.kernel.org
S: Supported
W: http://www.melexis.com
+F: Documentation/devicetree/bindings/media/i2c/melexis,mlx7502x.yaml
F: Documentation/userspace-api/media/drivers/mlx7502x.rst
F: Documentation/userspace-api/media/v4l/ext-ctrls-tof.rst
F: include/uapi/linux/mlx7502x.h
Add device tree binding of the mlx7502x and update MAINTAINERS Signed-off-by: Volodymyr Kharuk <vkh@melexis.com> --- .../bindings/media/i2c/melexis,mlx7502x.yaml | 126 ++++++++++++++++++ MAINTAINERS | 1 + 2 files changed, 127 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/i2c/melexis,mlx7502x.yaml