[v5,1/9] package/nxp: new package directory

The "nxp" directory is intended to contain all NXP
QorIQ (including PowerPC and LayerScape serial) related packages,
together with their download site and version info.

Signed-off-by: Changming Huang <jerry.huang@nxp.com>
---
changes since v4:
no changes.

changes since v3:
no changes.

changes since v2:
1. change the sub-direcotry to "nxp".
2. add helper.mk macro to extract compressed file.

changes since v1:
no changes.
---
 package/Config.in     |  1 +
 package/nxp/Config.in |  4 ++++
 package/nxp/helper.mk | 32 ++++++++++++++++++++++++++++++++
 3 files changed, 37 insertions(+)
 create mode 100644 package/nxp/Config.in
 create mode 100644 package/nxp/helper.mk

Hi Changming,

  I finally started picking up this series after two years. Unfortunately, I 
have a lot of requests for changes still.

On 07/02/2020 09:38, Changming Huang wrote:
> The "nxp" directory is intended to contain all NXP
> QorIQ (including PowerPC and LayerScape serial) related packages,
> together with their download site and version info.

  We try to avoid subdirectories in package/; we only add them in case there is 
some common functionality that needs to be factored out, like for e.g. qt5.

  In this series, the only commonality that I found is the binary extraction, 
but it ends up to be used only by qoriq-cadence-dp-firmware. That's not worth it 
IMHO.

  Therefore, I marked this patch and rejected.

  Note that it would make sense to do this if we would also move the 
freescale-imx stuff into the same directory (freescale is anyway nxp now so it 
should be OK to do that).


> Signed-off-by: Changming Huang <jerry.huang@nxp.com>
> ---
> changes since v4:
> no changes.
> 
> changes since v3:
> no changes.
> 
> changes since v2:
> 1. change the sub-direcotry to "nxp".
> 2. add helper.mk macro to extract compressed file.
> 
> changes since v1:
> no changes.
> ---
>   package/Config.in     |  1 +
>   package/nxp/Config.in |  4 ++++
>   package/nxp/helper.mk | 32 ++++++++++++++++++++++++++++++++
>   3 files changed, 37 insertions(+)
>   create mode 100644 package/nxp/Config.in
>   create mode 100644 package/nxp/helper.mk
> 
> diff --git a/package/Config.in b/package/Config.in
> index bad4f9cba6..f9827769a2 100644
> --- a/package/Config.in
> +++ b/package/Config.in
> @@ -497,6 +497,7 @@ endmenu
>   	source "package/nvidia-driver/Config.in"
>   	source "package/nvidia-tegra23/Config.in"
>   	source "package/nvme/Config.in"
> +	source "package/nxp/Config.in"
>   	source "package/ofono/Config.in"
>   	source "package/on2-8170-modules/Config.in"
>   	source "package/open2300/Config.in"
> diff --git a/package/nxp/Config.in b/package/nxp/Config.in
> new file mode 100644
> index 0000000000..575542c7ab
> --- /dev/null
> +++ b/package/nxp/Config.in
> @@ -0,0 +1,4 @@
> +menu "NXP QorIQ libraries"
> +	depends on BR2_aarch64 || BR2_arm || BR2_powerpc64 || BR2_powerpc
> +
> +endmenu
> diff --git a/package/nxp/helper.mk b/package/nxp/helper.mk
> new file mode 100644
> index 0000000000..79e4236249
> --- /dev/null
> +++ b/package/nxp/helper.mk

  The .mk file should have the same name as the directory, so nxp.mk.

  Regards,
  Arnout

> @@ -0,0 +1,32 @@
> +################################################################################
> +#
> +# helper
> +#
> +################################################################################
> +
> +# Helper for self-extracting binaries distributed by NXP.
> +#
> +# The --force option makes sure it doesn't fail if the source
> +# directory already exists. The --auto-accept skips the license check,
> +# as it is not needed in Buildroot because we have legal-info. Since
> +# there's a EULA in the binary file, we extract it in this macro, and
> +# it should therefore be added to the LICENSE_FILES variable of
> +# packages using this macro. Also, remember to set REDISTRIBUTE to
> +# "NO". Indeed, this is a legal minefield: the EULA specifies that the
> +# Board Support Package includes software and hardware (sic!) for
> +# which a separate license is needed...
> +#
> +# $(1): full path to the archive file
> +#
> +define NXP_EXTRACT_HELPER
> +	awk 'BEGIN      { start = 0; } \
> +	     /^EOEULA/  { start = 0; } \
> +	                { if (start) print; } \
> +	     /<<EOEULA/ { start = 1; }' \
> +	    $(1) > $(@D)/EULA
> +	cd $(@D) && sh $(1) --force --auto-accept
> +	find $(@D)/$(basename $(notdir $(1))) -mindepth 1 -maxdepth 1 -exec mv {} $(@D) \;
> +	rmdir $(@D)/$(basename $(notdir $(1)))
> +endef
> +
> +include $(sort $(wildcard package/nxp/*/*.mk))
>

Am 2022-01-06 15:45, schrieb Arnout Vandecappelle:
>  In this series, the only commonality that I found is the binary
> extraction, but it ends up to be used only by
> qoriq-cadence-dp-firmware. That's not worth it IMHO.

mh? all the imx stuff is using this method.

> 
>  Therefore, I marked this patch and rejected.
> 
>  Note that it would make sense to do this if we would also move the
> freescale-imx stuff into the same directory (freescale is anyway nxp
> now so it should be OK to do that).

ah. yes. that was the idea back then IMHO.

-michael