| Message ID | 20211108190200.290957-6-jae.hyun.yoo@intel.com |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | Add LCLK control into Aspeed LPC sub drivers | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | success | |
| robh/dt-meta-schema | success | |
| robh/dtbs-check | fail | build log |
On Mon, 08 Nov 2021 11:01:59 -0800, jae.hyun.yoo@intel.com wrote: > From: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> > > If LPC KCS driver is registered ahead of lpc-ctrl module, LPC KCS > hardware block will be enabled without heart beating of LCLK until > lpc-ctrl enables the LCLK. This issue causes improper handling on > host interrupts when the host sends interrupts in that time frame. > Then kernel eventually forcibly disables the interrupt with > dumping stack and printing a 'nobody cared this irq' message out. > > To prevent this issue, all LPC sub drivers should enable LCLK > individually so this patch adds 'clocks' property as one of > required properties to enable the LCLK by the LPC KCS driver. > > Note: dtsi change in this patch series should be applied along with, > and dtbs should be re-compiled after applying this series since > it's adding a new required property otherwise the driver will not > be probed correctly. > > Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> > --- > v2 -> v3: > * Made commit message more descriptive. > > v1 -> v2: > Changes sinve v1: > * Added 'clocks' property into kcs-bmc bindings using > 'aspeed,ast2400-kcs-bmc.yaml' because it's not merged into > 'aspeed-lpc.yaml' yet. The bindings merging could be done using a > separate patch later. > > .../devicetree/bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml | 7 +++++++ > 1 file changed, 7 insertions(+) > Reviewed-by: Rob Herring <robh@kernel.org>
diff --git a/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml index 4ff6fabfcb30..92ec0da047f4 100644 --- a/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml +++ b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml @@ -71,9 +71,14 @@ properties: $ref: '/schemas/types.yaml#/definitions/uint32' description: The host CPU IO map address + clocks: + maxItems: 1 + description: Reference clock for the LPC controller + required: - compatible - interrupts + - clocks additionalProperties: false @@ -96,6 +101,7 @@ allOf: examples: - | + #include <dt-bindings/clock/aspeed-clock.h> #include <dt-bindings/interrupt-controller/irq.h> kcs3: kcs@24 { compatible = "aspeed,ast2600-kcs-bmc"; @@ -103,4 +109,5 @@ examples: aspeed,lpc-io-reg = <0xca2>; aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>; interrupts = <8>; + clocks = <&syscon ASPEED_CLK_GATE_LCLK>; };