| Message ID | 20210609063834.2193864-1-drew@beagleboard.org |
|---|---|
| State | Accepted |
| Headers | show |
| Series | [1/3] beaglev: update to new starfive linux and u-boot | expand |
On Wed, Jun 9, 2021 at 5:15 PM Drew Fustini <drew@beagleboard.org> wrote: > > Update the commit id for u-boot to include fixes from the starfive-tech > u-boot repository: > > 494e5ef7b807 jh7100: Enable full 2M L2 cache > 4571f5a4e1e4 vic7100: enable cache ways (L2 cache) > abb06422a5cd Remove fdt_high and initrd_high for Starfive > 93099a61c7b0 starfive: beaglev: Disable SIFIVE_CLINT and enable RISCV_TIMER > bfb5abac3d1f Revert "riscv: Enable the SiFive CLINT block driver in S-Mode(VIC7100 ONLY)" > 7b70e1d44ba9 defconfig: enable cache_wayenable for better performance > 7c585978616b configs: earlycon=sbi is deprecated > > The commit abb06422a5cd ("Remove fdt_high and initrd_high for Starfive") > has removed the need for buildroot to patch the fdt_addr_r address. > > Update linux from commit in the old 5.10 branch that Fedora image was > using to head of esmil_starlight branch [1] which is currently based > on 5.13-rc5 and represents the best kernel for this board [2]. > > In addition, the updated kernel now has jh7100-beaglev-starlight.dtb so > buildroot no longer needs to copy the dtb from u-boot. > > [1] https://github.com/starfive-tech/linux/tree/esmil_starlight > [2] https://github.com/starfive-tech/linux/issues/26 > > Signed-off-by: Drew Fustini <drew@beagleboard.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Alistair > --- > board/beaglev/extlinux.conf | 2 +- > ...s-starfive-vic7100-adjust-fdt_addr_r.patch | 39 ------------------- > board/beaglev/post-build.sh | 6 --- > configs/beaglev_defconfig | 15 +++---- > 4 files changed, 9 insertions(+), 53 deletions(-) > delete mode 100644 board/beaglev/patches/uboot/0001-include-configs-starfive-vic7100-adjust-fdt_addr_r.patch > > diff --git a/board/beaglev/extlinux.conf b/board/beaglev/extlinux.conf > index c5444d094c82..9daf6a758142 100644 > --- a/board/beaglev/extlinux.conf > +++ b/board/beaglev/extlinux.conf > @@ -1,4 +1,4 @@ > label linux > kernel /boot/Image > - devicetree /boot/starfive_vic7100_beagle_v.dtb > + devicetree /boot/jh7100-beaglev-starlight.dtb > append console=ttyS0,115200 earlyprintk root=PARTUUID=0fef845a-c6e1-45bc-82f7-002fa720f958 rootwait > diff --git a/board/beaglev/patches/uboot/0001-include-configs-starfive-vic7100-adjust-fdt_addr_r.patch b/board/beaglev/patches/uboot/0001-include-configs-starfive-vic7100-adjust-fdt_addr_r.patch > deleted file mode 100644 > index 74d70f2721ad..000000000000 > --- a/board/beaglev/patches/uboot/0001-include-configs-starfive-vic7100-adjust-fdt_addr_r.patch > +++ /dev/null > @@ -1,39 +0,0 @@ > -From 2c4c813940c577590f3352cef0c49a8def17905d Mon Sep 17 00:00:00 2001 > -From: Thomas Petazzoni <thomas.petazzoni@bootlin.com> > -Date: Wed, 28 Apr 2021 22:58:45 +0200 > -Subject: [PATCH] include/configs/starfive-vic7100: adjust fdt_addr_r > - > -The default fdt_addr_r of 0x88000000 doesn't work, the kernel never > -boots. Using 0x90000000 works fine. > - > -Since it would overlap with the kernel_comp_addr_r area, this one is > -moved 16 MB further, at 0x91000000. > - > -Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> > ---- > - include/configs/starfive-vic7100.h | 4 ++-- > - 1 file changed, 2 insertions(+), 2 deletions(-) > - > -diff --git a/include/configs/starfive-vic7100.h b/include/configs/starfive-vic7100.h > -index 8c5915a73c..7150a23873 100644 > ---- a/include/configs/starfive-vic7100.h > -+++ b/include/configs/starfive-vic7100.h > -@@ -111,13 +111,13 @@ > - "fdt_high=0xffffffffffffffff\0" \ > - "initrd_high=0xffffffffffffffff\0" \ > - "kernel_addr_r=0x84000000\0" \ > -- "fdt_addr_r=0x88000000\0" \ > -+ "fdt_addr_r=0x90000000\0" \ > - "scriptaddr=0x88100000\0" \ > - "script_offset_f=0x1fff000\0" \ > - "script_size_f=0x1000\0" \ > - "pxefile_addr_r=0x88200000\0" \ > - "ramdisk_addr_r=0x88300000\0" \ > -- "kernel_comp_addr_r=0x90000000\0" \ > -+ "kernel_comp_addr_r=0x91000000\0" \ > - "kernel_comp_size=0x10000000\0" \ > - "type_guid_gpt_loader1=" TYPE_GUID_LOADER1 "\0" \ > - "type_guid_gpt_loader2=" TYPE_GUID_LOADER2 "\0" \ > --- > -2.30.2 > - > diff --git a/board/beaglev/post-build.sh b/board/beaglev/post-build.sh > index b19b9bf6d06b..fe61fd33cc84 100755 > --- a/board/beaglev/post-build.sh > +++ b/board/beaglev/post-build.sh > @@ -1,12 +1,6 @@ > #!/bin/sh > BOARD_DIR=$(dirname $0) > > -# The DTB to use is provided within the U-Boot source tree, so we grab > -# it from there, and install it to TARGET_DIR/boot/. > -eval $(make -C ${CONFIG_DIR} --no-print-directory QUOTED_VARS=YES VARS=UBOOT_DIR printvars) > -install -D -m0644 ${UBOOT_DIR}/arch/riscv/dts/starfive_vic7100_beagle_v.dtb \ > - ${TARGET_DIR}/boot/starfive_vic7100_beagle_v.dtb > - > # Bring the extlinux.conf file in. > install -D -m 0644 ${BOARD_DIR}/extlinux.conf \ > ${TARGET_DIR}/boot/extlinux/extlinux.conf > diff --git a/configs/beaglev_defconfig b/configs/beaglev_defconfig > index bbb69ca26814..895902a11a7c 100644 > --- a/configs/beaglev_defconfig > +++ b/configs/beaglev_defconfig > @@ -4,16 +4,17 @@ BR2_RISCV_ISA_CUSTOM_RVM=y > BR2_RISCV_ISA_CUSTOM_RVF=y > BR2_RISCV_ISA_CUSTOM_RVD=y > BR2_RISCV_ISA_CUSTOM_RVC=y > -BR2_GLOBAL_PATCH_DIR="board/beaglev/patches/" > -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y > +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_12=y > BR2_ROOTFS_POST_BUILD_SCRIPT="board/beaglev/post-build.sh" > BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" > BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/beaglev/genimage.cfg" > BR2_LINUX_KERNEL=y > BR2_LINUX_KERNEL_CUSTOM_TARBALL=y > -# HEAD of the Fedora branch > -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,starfive-tech,linux,710cf052d6abda73584481d920b4b6befc7240ea)/linux-710cf052d6abda73584481d920b4b6befc7240ea.tar.gz" > -BR2_LINUX_KERNEL_DEFCONFIG="starfive_vic7100_evb_sd_net" > +# HEAD of the 5.13 branch (esmil_starlight) > +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,starfive-tech,linux,83dba1f25dfc118cacec991c31a7a4cfa7405c89)/linux-83dba1f25dfc118cacec991c31a7a4cfa7405c89.tar.gz" > +BR2_LINUX_KERNEL_DEFCONFIG="starlight" > +BR2_LINUX_KERNEL_DTS_SUPPORT=y > +BR2_LINUX_KERNEL_INTREE_DTS_NAME="starfive/jh7100-beaglev-starlight" > BR2_LINUX_KERNEL_INSTALL_TARGET=y > BR2_TARGET_ROOTFS_EXT2=y > BR2_TARGET_ROOTFS_EXT2_4=y > @@ -31,8 +32,8 @@ BR2_TARGET_OPENSBI_UBOOT_PAYLOAD=y > BR2_TARGET_UBOOT=y > BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y > BR2_TARGET_UBOOT_CUSTOM_TARBALL=y > -# HEAD of the Fedora branch > -BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,starfive-tech,u-boot,3f3ac01a29ad1cd5fa519d86f81daead2447f1d4)/uboot-3f3ac01a29ad1cd5fa519d86f81daead2447f1d4.tar.gz" > +# HEAD of the starfive-tech:Fedora_VIC_7100_2021.04 branch > +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,starfive-tech,u-boot,494e5ef7b8071d0b2fba50616d97771e44cbcb7c)/uboot-494e5ef7b8071d0b2fba50616d97771e44cbcb7c.tar.gz" > BR2_TARGET_UBOOT_BOARD_DEFCONFIG="starfive_vic7100_beagle_v_smode" > BR2_PACKAGE_HOST_GENIMAGE=y > BR2_PACKAGE_HOST_JH71XX_TOOLS=y > -- > 2.27.0 > > _______________________________________________ > buildroot mailing list > buildroot@busybox.net > http://lists.busybox.net/mailman/listinfo/buildroot
On Wed, Jun 9, 2021 at 3:15 PM Drew Fustini <drew@beagleboard.org> wrote: > > Update the commit id for u-boot to include fixes from the starfive-tech > u-boot repository: > > 494e5ef7b807 jh7100: Enable full 2M L2 cache > 4571f5a4e1e4 vic7100: enable cache ways (L2 cache) > abb06422a5cd Remove fdt_high and initrd_high for Starfive > 93099a61c7b0 starfive: beaglev: Disable SIFIVE_CLINT and enable RISCV_TIMER > bfb5abac3d1f Revert "riscv: Enable the SiFive CLINT block driver in S-Mode(VIC7100 ONLY)" > 7b70e1d44ba9 defconfig: enable cache_wayenable for better performance > 7c585978616b configs: earlycon=sbi is deprecated > > The commit abb06422a5cd ("Remove fdt_high and initrd_high for Starfive") > has removed the need for buildroot to patch the fdt_addr_r address. > > Update linux from commit in the old 5.10 branch that Fedora image was > using to head of esmil_starlight branch [1] which is currently based > on 5.13-rc5 and represents the best kernel for this board [2]. > > In addition, the updated kernel now has jh7100-beaglev-starlight.dtb so > buildroot no longer needs to copy the dtb from u-boot. > > [1] https://github.com/starfive-tech/linux/tree/esmil_starlight > [2] https://github.com/starfive-tech/linux/issues/26 > > Signed-off-by: Drew Fustini <drew@beagleboard.org> > --- > board/beaglev/extlinux.conf | 2 +- > ...s-starfive-vic7100-adjust-fdt_addr_r.patch | 39 ------------------- > board/beaglev/post-build.sh | 6 --- > configs/beaglev_defconfig | 15 +++---- > 4 files changed, 9 insertions(+), 53 deletions(-) > delete mode 100644 board/beaglev/patches/uboot/0001-include-configs-starfive-vic7100-adjust-fdt_addr_r.patch > Reviewed-by: Bin Meng <bmeng.cn@gmail.com> No switch to upstream OpenSBI yet?
On Wed, Jun 9, 2021 at 2:15 AM Drew Fustini <drew@beagleboard.org> wrote: > > Update the commit id for u-boot to include fixes from the starfive-tech > u-boot repository: > > 494e5ef7b807 jh7100: Enable full 2M L2 cache > 4571f5a4e1e4 vic7100: enable cache ways (L2 cache) > abb06422a5cd Remove fdt_high and initrd_high for Starfive > 93099a61c7b0 starfive: beaglev: Disable SIFIVE_CLINT and enable RISCV_TIMER > bfb5abac3d1f Revert "riscv: Enable the SiFive CLINT block driver in S-Mode(VIC7100 ONLY)" > 7b70e1d44ba9 defconfig: enable cache_wayenable for better performance > 7c585978616b configs: earlycon=sbi is deprecated > > The commit abb06422a5cd ("Remove fdt_high and initrd_high for Starfive") > has removed the need for buildroot to patch the fdt_addr_r address. > > Update linux from commit in the old 5.10 branch that Fedora image was > using to head of esmil_starlight branch [1] which is currently based > on 5.13-rc5 and represents the best kernel for this board [2]. > > In addition, the updated kernel now has jh7100-beaglev-starlight.dtb so > buildroot no longer needs to copy the dtb from u-boot. > > [1] https://github.com/starfive-tech/linux/tree/esmil_starlight > [2] https://github.com/starfive-tech/linux/issues/26 > > Signed-off-by: Drew Fustini <drew@beagleboard.org> > --- > +# HEAD of the 5.13 branch (esmil_starlight) > +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,starfive-tech,linux,83dba1f25dfc118cacec991c31a7a4cfa7405c89)/linux-83dba1f25dfc118cacec991c31a7a4cfa7405c89.tar.gz" > +BR2_LINUX_KERNEL_DEFCONFIG="starlight" > +BR2_LINUX_KERNEL_DTS_SUPPORT=y > +BR2_LINUX_KERNEL_INTREE_DTS_NAME="starfive/jh7100-beaglev-starlight" Careful, @Drew Fustini this branch get's rebased on every kernel rc.. Unless we manually create a tag, this sha will disappear next week.. https://github.com/starfive-tech/linux/tree/esmil_starlight Regards,
On Wed, Jun 09, 2021 at 10:08:55AM -0500, Robert Nelson wrote: > On Wed, Jun 9, 2021 at 2:15 AM Drew Fustini <drew@beagleboard.org> wrote: > > > > Update the commit id for u-boot to include fixes from the starfive-tech > > u-boot repository: > > > > 494e5ef7b807 jh7100: Enable full 2M L2 cache > > 4571f5a4e1e4 vic7100: enable cache ways (L2 cache) > > abb06422a5cd Remove fdt_high and initrd_high for Starfive > > 93099a61c7b0 starfive: beaglev: Disable SIFIVE_CLINT and enable RISCV_TIMER > > bfb5abac3d1f Revert "riscv: Enable the SiFive CLINT block driver in S-Mode(VIC7100 ONLY)" > > 7b70e1d44ba9 defconfig: enable cache_wayenable for better performance > > 7c585978616b configs: earlycon=sbi is deprecated > > > > The commit abb06422a5cd ("Remove fdt_high and initrd_high for Starfive") > > has removed the need for buildroot to patch the fdt_addr_r address. > > > > Update linux from commit in the old 5.10 branch that Fedora image was > > using to head of esmil_starlight branch [1] which is currently based > > on 5.13-rc5 and represents the best kernel for this board [2]. > > > > In addition, the updated kernel now has jh7100-beaglev-starlight.dtb so > > buildroot no longer needs to copy the dtb from u-boot. > > > > [1] https://github.com/starfive-tech/linux/tree/esmil_starlight > > [2] https://github.com/starfive-tech/linux/issues/26 > > > > Signed-off-by: Drew Fustini <drew@beagleboard.org> > > --- > > > > > +# HEAD of the 5.13 branch (esmil_starlight) > > +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,starfive-tech,linux,83dba1f25dfc118cacec991c31a7a4cfa7405c89)/linux-83dba1f25dfc118cacec991c31a7a4cfa7405c89.tar.gz" > > +BR2_LINUX_KERNEL_DEFCONFIG="starlight" > > +BR2_LINUX_KERNEL_DTS_SUPPORT=y > > +BR2_LINUX_KERNEL_INTREE_DTS_NAME="starfive/jh7100-beaglev-starlight" > > Careful, @Drew Fustini this branch get's rebased on every kernel rc.. > Unless we manually create a tag, this sha will disappear next week.. I do not believe the commit [1] will ever go away as long as the repo still exists. But to make sure, I created buildroot-20210609 tag [2] to represent what is being used to indicate what is being used in upstream buildroot. -Drew [1] https://github.com/starfive-tech/linux/commit/83dba1f25dfc118cacec991c31a7a4cfa7405c89 [2] https://github.com/starfive-tech/linux/releases/tag/buildroot-20210609
On Wed, Jun 09, 2021 at 08:24:35PM +0800, Bin Meng wrote: > On Wed, Jun 9, 2021 at 3:15 PM Drew Fustini <drew@beagleboard.org> wrote: > > > > Update the commit id for u-boot to include fixes from the starfive-tech > > u-boot repository: > > > > 494e5ef7b807 jh7100: Enable full 2M L2 cache > > 4571f5a4e1e4 vic7100: enable cache ways (L2 cache) > > abb06422a5cd Remove fdt_high and initrd_high for Starfive > > 93099a61c7b0 starfive: beaglev: Disable SIFIVE_CLINT and enable RISCV_TIMER > > bfb5abac3d1f Revert "riscv: Enable the SiFive CLINT block driver in S-Mode(VIC7100 ONLY)" > > 7b70e1d44ba9 defconfig: enable cache_wayenable for better performance > > 7c585978616b configs: earlycon=sbi is deprecated > > > > The commit abb06422a5cd ("Remove fdt_high and initrd_high for Starfive") > > has removed the need for buildroot to patch the fdt_addr_r address. > > > > Update linux from commit in the old 5.10 branch that Fedora image was > > using to head of esmil_starlight branch [1] which is currently based > > on 5.13-rc5 and represents the best kernel for this board [2]. > > > > In addition, the updated kernel now has jh7100-beaglev-starlight.dtb so > > buildroot no longer needs to copy the dtb from u-boot. > > > > [1] https://github.com/starfive-tech/linux/tree/esmil_starlight > > [2] https://github.com/starfive-tech/linux/issues/26 > > > > Signed-off-by: Drew Fustini <drew@beagleboard.org> > > --- > > board/beaglev/extlinux.conf | 2 +- > > ...s-starfive-vic7100-adjust-fdt_addr_r.patch | 39 ------------------- > > board/beaglev/post-build.sh | 6 --- > > configs/beaglev_defconfig | 15 +++---- > > 4 files changed, 9 insertions(+), 53 deletions(-) > > delete mode 100644 board/beaglev/patches/uboot/0001-include-configs-starfive-vic7100-adjust-fdt_addr_r.patch > > > > Reviewed-by: Bin Meng <bmeng.cn@gmail.com> > > No switch to upstream OpenSBI yet? I attempted switching to upstream OpenSBI and generic platform but I could not get it to boot. I do want to further troubleshoot that with you but, for now, I did not feel it is that important in the context of buildroot. The urgency for this patch is to get buildroot pointing to the 5.13 kernel as it has fixes for several problems in the older 5.10 kernel that buildroot currently points to. A buildroot user looking at upstream right now would not know that we have moved on to 5.13. Another practical issue is that upstream OpensBI generates a much bigger fw_payload.bin.out. Commit 2524b0e [1] in starfive-tech/opensbi makes it easier for people doing uboot development as the xmodem transfer of fw_payload.bin.out is much faster. thanks, drew [1] https://github.com/starfive-tech/opensbi/commit/2524b0ecd8684b42bc7a4c69794f40f11cbbe2a5
On 09/06/2021 08:38, Drew Fustini wrote: > Update the commit id for u-boot to include fixes from the starfive-tech > u-boot repository: > > 494e5ef7b807 jh7100: Enable full 2M L2 cache > 4571f5a4e1e4 vic7100: enable cache ways (L2 cache) > abb06422a5cd Remove fdt_high and initrd_high for Starfive > 93099a61c7b0 starfive: beaglev: Disable SIFIVE_CLINT and enable RISCV_TIMER > bfb5abac3d1f Revert "riscv: Enable the SiFive CLINT block driver in S-Mode(VIC7100 ONLY)" > 7b70e1d44ba9 defconfig: enable cache_wayenable for better performance > 7c585978616b configs: earlycon=sbi is deprecated > > The commit abb06422a5cd ("Remove fdt_high and initrd_high for Starfive") > has removed the need for buildroot to patch the fdt_addr_r address. > > Update linux from commit in the old 5.10 branch that Fedora image was > using to head of esmil_starlight branch [1] which is currently based > on 5.13-rc5 and represents the best kernel for this board [2]. > > In addition, the updated kernel now has jh7100-beaglev-starlight.dtb so > buildroot no longer needs to copy the dtb from u-boot. > > [1] https://github.com/starfive-tech/linux/tree/esmil_starlight > [2] https://github.com/starfive-tech/linux/issues/26 > > Signed-off-by: Drew Fustini <drew@beagleboard.org> Series applied to master, thanks. I've added a comment to refer to the tag you added to the linux repo, and I changed the commit message of the other two to make it explicit in the Subject line that it's a version bump. Regards, Arnout [snip]
diff --git a/board/beaglev/extlinux.conf b/board/beaglev/extlinux.conf index c5444d094c82..9daf6a758142 100644 --- a/board/beaglev/extlinux.conf +++ b/board/beaglev/extlinux.conf @@ -1,4 +1,4 @@ label linux kernel /boot/Image - devicetree /boot/starfive_vic7100_beagle_v.dtb + devicetree /boot/jh7100-beaglev-starlight.dtb append console=ttyS0,115200 earlyprintk root=PARTUUID=0fef845a-c6e1-45bc-82f7-002fa720f958 rootwait diff --git a/board/beaglev/patches/uboot/0001-include-configs-starfive-vic7100-adjust-fdt_addr_r.patch b/board/beaglev/patches/uboot/0001-include-configs-starfive-vic7100-adjust-fdt_addr_r.patch deleted file mode 100644 index 74d70f2721ad..000000000000 --- a/board/beaglev/patches/uboot/0001-include-configs-starfive-vic7100-adjust-fdt_addr_r.patch +++ /dev/null @@ -1,39 +0,0 @@ -From 2c4c813940c577590f3352cef0c49a8def17905d Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni <thomas.petazzoni@bootlin.com> -Date: Wed, 28 Apr 2021 22:58:45 +0200 -Subject: [PATCH] include/configs/starfive-vic7100: adjust fdt_addr_r - -The default fdt_addr_r of 0x88000000 doesn't work, the kernel never -boots. Using 0x90000000 works fine. - -Since it would overlap with the kernel_comp_addr_r area, this one is -moved 16 MB further, at 0x91000000. - -Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> ---- - include/configs/starfive-vic7100.h | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -diff --git a/include/configs/starfive-vic7100.h b/include/configs/starfive-vic7100.h -index 8c5915a73c..7150a23873 100644 ---- a/include/configs/starfive-vic7100.h -+++ b/include/configs/starfive-vic7100.h -@@ -111,13 +111,13 @@ - "fdt_high=0xffffffffffffffff\0" \ - "initrd_high=0xffffffffffffffff\0" \ - "kernel_addr_r=0x84000000\0" \ -- "fdt_addr_r=0x88000000\0" \ -+ "fdt_addr_r=0x90000000\0" \ - "scriptaddr=0x88100000\0" \ - "script_offset_f=0x1fff000\0" \ - "script_size_f=0x1000\0" \ - "pxefile_addr_r=0x88200000\0" \ - "ramdisk_addr_r=0x88300000\0" \ -- "kernel_comp_addr_r=0x90000000\0" \ -+ "kernel_comp_addr_r=0x91000000\0" \ - "kernel_comp_size=0x10000000\0" \ - "type_guid_gpt_loader1=" TYPE_GUID_LOADER1 "\0" \ - "type_guid_gpt_loader2=" TYPE_GUID_LOADER2 "\0" \ --- -2.30.2 - diff --git a/board/beaglev/post-build.sh b/board/beaglev/post-build.sh index b19b9bf6d06b..fe61fd33cc84 100755 --- a/board/beaglev/post-build.sh +++ b/board/beaglev/post-build.sh @@ -1,12 +1,6 @@ #!/bin/sh BOARD_DIR=$(dirname $0) -# The DTB to use is provided within the U-Boot source tree, so we grab -# it from there, and install it to TARGET_DIR/boot/. -eval $(make -C ${CONFIG_DIR} --no-print-directory QUOTED_VARS=YES VARS=UBOOT_DIR printvars) -install -D -m0644 ${UBOOT_DIR}/arch/riscv/dts/starfive_vic7100_beagle_v.dtb \ - ${TARGET_DIR}/boot/starfive_vic7100_beagle_v.dtb - # Bring the extlinux.conf file in. install -D -m 0644 ${BOARD_DIR}/extlinux.conf \ ${TARGET_DIR}/boot/extlinux/extlinux.conf diff --git a/configs/beaglev_defconfig b/configs/beaglev_defconfig index bbb69ca26814..895902a11a7c 100644 --- a/configs/beaglev_defconfig +++ b/configs/beaglev_defconfig @@ -4,16 +4,17 @@ BR2_RISCV_ISA_CUSTOM_RVM=y BR2_RISCV_ISA_CUSTOM_RVF=y BR2_RISCV_ISA_CUSTOM_RVD=y BR2_RISCV_ISA_CUSTOM_RVC=y -BR2_GLOBAL_PATCH_DIR="board/beaglev/patches/" -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_12=y BR2_ROOTFS_POST_BUILD_SCRIPT="board/beaglev/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/beaglev/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -# HEAD of the Fedora branch -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,starfive-tech,linux,710cf052d6abda73584481d920b4b6befc7240ea)/linux-710cf052d6abda73584481d920b4b6befc7240ea.tar.gz" -BR2_LINUX_KERNEL_DEFCONFIG="starfive_vic7100_evb_sd_net" +# HEAD of the 5.13 branch (esmil_starlight) +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,starfive-tech,linux,83dba1f25dfc118cacec991c31a7a4cfa7405c89)/linux-83dba1f25dfc118cacec991c31a7a4cfa7405c89.tar.gz" +BR2_LINUX_KERNEL_DEFCONFIG="starlight" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="starfive/jh7100-beaglev-starlight" BR2_LINUX_KERNEL_INSTALL_TARGET=y BR2_TARGET_ROOTFS_EXT2=y BR2_TARGET_ROOTFS_EXT2_4=y @@ -31,8 +32,8 @@ BR2_TARGET_OPENSBI_UBOOT_PAYLOAD=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_TARBALL=y -# HEAD of the Fedora branch -BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,starfive-tech,u-boot,3f3ac01a29ad1cd5fa519d86f81daead2447f1d4)/uboot-3f3ac01a29ad1cd5fa519d86f81daead2447f1d4.tar.gz" +# HEAD of the starfive-tech:Fedora_VIC_7100_2021.04 branch +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,starfive-tech,u-boot,494e5ef7b8071d0b2fba50616d97771e44cbcb7c)/uboot-494e5ef7b8071d0b2fba50616d97771e44cbcb7c.tar.gz" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="starfive_vic7100_beagle_v_smode" BR2_PACKAGE_HOST_GENIMAGE=y BR2_PACKAGE_HOST_JH71XX_TOOLS=y
Update the commit id for u-boot to include fixes from the starfive-tech u-boot repository: 494e5ef7b807 jh7100: Enable full 2M L2 cache 4571f5a4e1e4 vic7100: enable cache ways (L2 cache) abb06422a5cd Remove fdt_high and initrd_high for Starfive 93099a61c7b0 starfive: beaglev: Disable SIFIVE_CLINT and enable RISCV_TIMER bfb5abac3d1f Revert "riscv: Enable the SiFive CLINT block driver in S-Mode(VIC7100 ONLY)" 7b70e1d44ba9 defconfig: enable cache_wayenable for better performance 7c585978616b configs: earlycon=sbi is deprecated The commit abb06422a5cd ("Remove fdt_high and initrd_high for Starfive") has removed the need for buildroot to patch the fdt_addr_r address. Update linux from commit in the old 5.10 branch that Fedora image was using to head of esmil_starlight branch [1] which is currently based on 5.13-rc5 and represents the best kernel for this board [2]. In addition, the updated kernel now has jh7100-beaglev-starlight.dtb so buildroot no longer needs to copy the dtb from u-boot. [1] https://github.com/starfive-tech/linux/tree/esmil_starlight [2] https://github.com/starfive-tech/linux/issues/26 Signed-off-by: Drew Fustini <drew@beagleboard.org> --- board/beaglev/extlinux.conf | 2 +- ...s-starfive-vic7100-adjust-fdt_addr_r.patch | 39 ------------------- board/beaglev/post-build.sh | 6 --- configs/beaglev_defconfig | 15 +++---- 4 files changed, 9 insertions(+), 53 deletions(-) delete mode 100644 board/beaglev/patches/uboot/0001-include-configs-starfive-vic7100-adjust-fdt_addr_r.patch