diff mbox series

[v2,04/12] dt-bindings: spi: Move the bindings for the FSL QSPI driver

Message ID 1530789310-16254-5-git-send-email-frieder.schrempf@exceet.de
State Changes Requested
Delegated to: Boris Brezillon
Headers show
Series Port the FSL QSPI driver to the SPI framework | expand

Commit Message

Frieder Schrempf July 5, 2018, 11:15 a.m. UTC 
Move the documentation of the old SPI NOR driver to the place of the new
SPI memory interface based driver.

Signed-off-by: Frieder Schrempf <frieder.schrempf@exceet.de>
---
Changes in v2:

Comments

Rob Herring July 11, 2018, 3:54 p.m. UTC | #1 
On Thu, Jul 05, 2018 at 01:15:00PM +0200, Frieder Schrempf wrote:
> Move the documentation of the old SPI NOR driver to the place of the new
> SPI memory interface based driver.
> 
> Signed-off-by: Frieder Schrempf <frieder.schrempf@exceet.de>
> ---
> Changes in v2:
> ==============
> * Split the moving and editing of the dt-bindings in two patches
> 
>  .../devicetree/bindings/mtd/fsl-quadspi.txt     | 65 --------------------
>  .../devicetree/bindings/spi/spi-fsl-qspi.txt    | 65 ++++++++++++++++++++
>  2 files changed, 65 insertions(+), 65 deletions(-)

Next time, use the -M option so the move shows any real diffs.

Acked-by: Rob Herring <robh@kernel.org>
Frieder Schrempf July 12, 2018, 8:11 a.m. UTC | #2 
Hi Rob,

On 11.07.2018 17:54, Rob Herring wrote:
> On Thu, Jul 05, 2018 at 01:15:00PM +0200, Frieder Schrempf wrote:
>> Move the documentation of the old SPI NOR driver to the place of the new
>> SPI memory interface based driver.
>>
>> Signed-off-by: Frieder Schrempf <frieder.schrempf@exceet.de>
>> ---
>> Changes in v2:
>> ==============
>> * Split the moving and editing of the dt-bindings in two patches
>>
>>   .../devicetree/bindings/mtd/fsl-quadspi.txt     | 65 --------------------
>>   .../devicetree/bindings/spi/spi-fsl-qspi.txt    | 65 ++++++++++++++++++++
>>   2 files changed, 65 insertions(+), 65 deletions(-)
> 
> Next time, use the -M option so the move shows any real diffs.

Ok, I'll keep that in mind.

Thanks,
Frieder

> 
> Acked-by: Rob Herring <robh@kernel.org>
>
diff mbox series

Patch

==============
* Split the moving and editing of the dt-bindings in two patches

 .../devicetree/bindings/mtd/fsl-quadspi.txt     | 65 --------------------
 .../devicetree/bindings/spi/spi-fsl-qspi.txt    | 65 ++++++++++++++++++++
 2 files changed, 65 insertions(+), 65 deletions(-)

diff --git a/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt b/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt
deleted file mode 100644
index 483e9cf..0000000
--- a/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt
+++ /dev/null
@@ -1,65 +0,0 @@ 
-* Freescale Quad Serial Peripheral Interface(QuadSPI)
-
-Required properties:
-  - compatible : Should be "fsl,vf610-qspi", "fsl,imx6sx-qspi",
-		 "fsl,imx7d-qspi", "fsl,imx6ul-qspi",
-		 "fsl,ls1021a-qspi"
-		 or
-		 "fsl,ls2080a-qspi" followed by "fsl,ls1021a-qspi",
-		 "fsl,ls1043a-qspi" followed by "fsl,ls1021a-qspi"
-  - reg : the first contains the register location and length,
-          the second contains the memory mapping address and length
-  - reg-names: Should contain the reg names "QuadSPI" and "QuadSPI-memory"
-  - interrupts : Should contain the interrupt for the device
-  - clocks : The clocks needed by the QuadSPI controller
-  - clock-names : Should contain the name of the clocks: "qspi_en" and "qspi".
-
-Optional properties:
-  - fsl,qspi-has-second-chip: The controller has two buses, bus A and bus B.
-                              Each bus can be connected with two NOR flashes.
-			      Most of the time, each bus only has one NOR flash
-			      connected, this is the default case.
-			      But if there are two NOR flashes connected to the
-			      bus, you should enable this property.
-			      (Please check the board's schematic.)
-  - big-endian : That means the IP register is big endian
-
-Example:
-
-qspi0: quadspi@40044000 {
-	compatible = "fsl,vf610-qspi";
-	reg = <0x40044000 0x1000>, <0x20000000 0x10000000>;
-	reg-names = "QuadSPI", "QuadSPI-memory";
-	interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&clks VF610_CLK_QSPI0_EN>,
-		<&clks VF610_CLK_QSPI0>;
-	clock-names = "qspi_en", "qspi";
-
-	flash0: s25fl128s@0 {
-		....
-	};
-};
-
-Example showing the usage of two SPI NOR devices:
-
-&qspi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_qspi2>;
-	status = "okay";
-
-	flash0: n25q256a@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "micron,n25q256a", "jedec,spi-nor";
-		spi-max-frequency = <29000000>;
-		reg = <0>;
-	};
-
-	flash1: n25q256a@1 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "micron,n25q256a", "jedec,spi-nor";
-		spi-max-frequency = <29000000>;
-		reg = <1>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-qspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-qspi.txt
new file mode 100644
index 0000000..483e9cf
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-fsl-qspi.txt
@@ -0,0 +1,65 @@ 
+* Freescale Quad Serial Peripheral Interface(QuadSPI)
+
+Required properties:
+  - compatible : Should be "fsl,vf610-qspi", "fsl,imx6sx-qspi",
+		 "fsl,imx7d-qspi", "fsl,imx6ul-qspi",
+		 "fsl,ls1021a-qspi"
+		 or
+		 "fsl,ls2080a-qspi" followed by "fsl,ls1021a-qspi",
+		 "fsl,ls1043a-qspi" followed by "fsl,ls1021a-qspi"
+  - reg : the first contains the register location and length,
+          the second contains the memory mapping address and length
+  - reg-names: Should contain the reg names "QuadSPI" and "QuadSPI-memory"
+  - interrupts : Should contain the interrupt for the device
+  - clocks : The clocks needed by the QuadSPI controller
+  - clock-names : Should contain the name of the clocks: "qspi_en" and "qspi".
+
+Optional properties:
+  - fsl,qspi-has-second-chip: The controller has two buses, bus A and bus B.
+                              Each bus can be connected with two NOR flashes.
+			      Most of the time, each bus only has one NOR flash
+			      connected, this is the default case.
+			      But if there are two NOR flashes connected to the
+			      bus, you should enable this property.
+			      (Please check the board's schematic.)
+  - big-endian : That means the IP register is big endian
+
+Example:
+
+qspi0: quadspi@40044000 {
+	compatible = "fsl,vf610-qspi";
+	reg = <0x40044000 0x1000>, <0x20000000 0x10000000>;
+	reg-names = "QuadSPI", "QuadSPI-memory";
+	interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&clks VF610_CLK_QSPI0_EN>,
+		<&clks VF610_CLK_QSPI0>;
+	clock-names = "qspi_en", "qspi";
+
+	flash0: s25fl128s@0 {
+		....
+	};
+};
+
+Example showing the usage of two SPI NOR devices:
+
+&qspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi2>;
+	status = "okay";
+
+	flash0: n25q256a@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q256a", "jedec,spi-nor";
+		spi-max-frequency = <29000000>;
+		reg = <0>;
+	};
+
+	flash1: n25q256a@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q256a", "jedec,spi-nor";
+		spi-max-frequency = <29000000>;
+		reg = <1>;
+	};
+};