| Message ID | 1498125658-14554-1-git-send-email-jacopo+renesas@jmondi.org |
|---|---|
| State | New |
| Headers | show |
On Thu, Jun 22, 2017 at 12:00:58PM +0200, Jacopo Mondi wrote: > Add output-enable generic pin configuration property. > This properties allows enabling/disabling pin's output capabilities > without actually driving any value on the line. > > --- > v1->v2: > - Expand the property description as suggested by Laurent. I ended up > mentioning the in-famous output buffer :) > > One (more) question to GPIO people on: > + PCONFDUMP(PIN_CONFIG_OUTPUT_ENABLE, "output enabled", NULL, false), > > I copied this from INPUT_ENABLE where arguments 2 and 3 passed to PCONFDUMP are > NULL and false even if the property has an argument, used to enable/disable > the input mode. Is this intended? Should that be turned instead to > - PCONFDUMP(PIN_CONFIG_INPUT_ENABLE, "input enabled", NULL, false), > + PCONFDUMP(PIN_CONFIG_INPUT_ENABLE, "input enabled", "enabled", true), > > Note that the same applies to most of the properties that have an > "enable"/"disable" argument. Just to make sure this is done on purpose. > > Thanks > j > .../devicetree/bindings/pinctrl/pinctrl-bindings.txt | 2 ++ Acked-by: Rob Herring <robh@kernel.org> > drivers/pinctrl/pinconf-generic.c | 3 +++ > include/linux/pinctrl/pinconf-generic.h | 15 +++++++++++---- > 3 files changed, 16 insertions(+), 4 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Jun 22, 2017 at 12:00 PM, Jacopo Mondi <jacopo+renesas@jmondi.org> wrote: > Add output-enable generic pin configuration property. > This properties allows enabling/disabling pin's output capabilities > without actually driving any value on the line. > > --- > v1->v2: > - Expand the property description as suggested by Laurent. I ended up > mentioning the in-famous output buffer :) I have applied the patch adding a few elaborations in the binding that the situation where you may use this is typically when enabling/disabling input or output buffers irrespective of the mode of the line as a whole. We might need even more documentation because this is really confusing. But for now it lets drivers work, which is nice. Rough consensus and running code should be our guide. Yours, Linus Walleij -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Jun 29, 2017 at 3:33 PM, Linus Walleij <linus.walleij@linaro.org> wrote: > On Thu, Jun 22, 2017 at 12:00 PM, Jacopo Mondi > <jacopo+renesas@jmondi.org> wrote: > >> Add output-enable generic pin configuration property. >> This properties allows enabling/disabling pin's output capabilities >> without actually driving any value on the line. > I have applied the patch adding a few elaborations in the binding that > the situation where you may use this is typically when enabling/disabling > input or output buffers irrespective of the mode of the line as a whole. > > We might need even more documentation because this is really > confusing. > > But for now it lets drivers work, which is nice. > > Rough consensus and running code should be our guide. At least this looks much better than odd bi-directional thingy. Thanks!
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt index f01d154..f8af190 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt @@ -259,6 +259,8 @@ input-debounce - debounce mode with debound time X power-source - select between different power supplies low-power-enable - enable low power mode low-power-disable - disable low power mode +output-disable - disable output on a pin +output-enable - enable output on a pin output-low - set the pin to output mode with low level output-high - set the pin to output mode with high level slew-rate - set the slew rate diff --git a/drivers/pinctrl/pinconf-generic.c b/drivers/pinctrl/pinconf-generic.c index 720a19f..fc0c230 100644 --- a/drivers/pinctrl/pinconf-generic.c +++ b/drivers/pinctrl/pinconf-generic.c @@ -44,6 +44,7 @@ static const struct pin_config_item conf_items[] = { PCONFDUMP(PIN_CONFIG_INPUT_SCHMITT, "input schmitt trigger", NULL, false), PCONFDUMP(PIN_CONFIG_INPUT_SCHMITT_ENABLE, "input schmitt enabled", NULL, false), PCONFDUMP(PIN_CONFIG_LOW_POWER_MODE, "pin low power", "mode", true), + PCONFDUMP(PIN_CONFIG_OUTPUT_ENABLE, "output enabled", NULL, false), PCONFDUMP(PIN_CONFIG_OUTPUT, "pin output", "level", true), PCONFDUMP(PIN_CONFIG_POWER_SOURCE, "pin power source", "selector", true), PCONFDUMP(PIN_CONFIG_SLEW_RATE, "slew rate", NULL, true), @@ -172,6 +173,8 @@ static const struct pinconf_generic_params dt_params[] = { { "input-schmitt-enable", PIN_CONFIG_INPUT_SCHMITT_ENABLE, 1 }, { "low-power-disable", PIN_CONFIG_LOW_POWER_MODE, 0 }, { "low-power-enable", PIN_CONFIG_LOW_POWER_MODE, 1 }, + { "output-disable", PIN_CONFIG_OUTPUT_ENABLE, 0 }, + { "output-enable", PIN_CONFIG_OUTPUT_ENABLE, 1 }, { "output-high", PIN_CONFIG_OUTPUT, 1, }, { "output-low", PIN_CONFIG_OUTPUT, 0, }, { "power-source", PIN_CONFIG_POWER_SOURCE, 0 }, diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h index 7620eb1..231d307 100644 --- a/include/linux/pinctrl/pinconf-generic.h +++ b/include/linux/pinctrl/pinconf-generic.h @@ -73,10 +73,16 @@ * operation, if several modes of operation are supported these can be * passed in the argument on a custom form, else just use argument 1 * to indicate low power mode, argument 0 turns low power mode off. - * @PIN_CONFIG_OUTPUT: this will configure the pin as an output. Use argument - * 1 to indicate high level, argument 0 to indicate low level. (Please - * see Documentation/pinctrl.txt, section "GPIO mode pitfalls" for a - * discussion around this parameter.) + * @PIN_CONFIG_OUTPUT_ENABLE: this will enable the pin's output mode + * without driving a value there. For most platforms this reduces to + * enable the output buffers and then let the pin controller current + * configuration (eg. the currently selected mux function) drive values on + * the line. Use argument 1 to enable output mode, argument 0 to disable + * it. + * @PIN_CONFIG_OUTPUT: this will configure the pin as an output and drive a + * value on the line. Use argument 1 to indicate high level, argument 0 to + * indicate low level. (Please see Documentation/pinctrl.txt, section + * "GPIO mode pitfalls" for a discussion around this parameter.) * @PIN_CONFIG_POWER_SOURCE: if the pin can select between different power * supplies, the argument to this parameter (on a custom format) tells * the driver which alternative power source to use. @@ -105,6 +111,7 @@ enum pin_config_param { PIN_CONFIG_INPUT_SCHMITT, PIN_CONFIG_INPUT_SCHMITT_ENABLE, PIN_CONFIG_LOW_POWER_MODE, + PIN_CONFIG_OUTPUT_ENABLE, PIN_CONFIG_OUTPUT, PIN_CONFIG_POWER_SOURCE, PIN_CONFIG_SLEW_RATE,