diff mbox series

[L,03/16] ASoC: dt-bindings: cirrus, cs35l41: Document CS35l41 shared boost

Message ID 20230801083649.3602806-4-kai.heng.feng@canonical.com
State New
Headers show
Series [L,01/16] ASoC: cs35l41: Refactor error release code | expand

Commit Message

Kai-Heng Feng Aug. 1, 2023, 8:36 a.m. UTC 
From: Lucas Tanure <lucas.tanure@collabora.com>

BugLink: https://bugs.launchpad.net/bugs/2029199

Describe the properties used for shared boost configuration.
Based on David Rhodes shared boost patches.

Signed-off-by: Lucas Tanure <lucas.tanure@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: David Rhodes <david.rhodes@cirrus.com>
Link: https://lore.kernel.org/r/20230223084324.9076-5-lucas.tanure@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
(backported from commit 340307d7effd99303fe933cde3b7288f8f3c6677)
[khfeng: Skipped documentation cleanup]
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
---
 .../devicetree/bindings/sound/cirrus,cs35l41.yaml      | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs35l41.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs35l41.yaml
index 82062d80d700..57c4a8c6dbb9 100644
--- a/Documentation/devicetree/bindings/sound/cirrus,cs35l41.yaml
+++ b/Documentation/devicetree/bindings/sound/cirrus,cs35l41.yaml
@@ -82,11 +82,19 @@  properties:
       boost-cap-microfarad.
       External Boost must have GPIO1 as GPIO output. GPIO1 will be set high to
       enable boost voltage.
+      Shared boost allows two amplifiers to share a single boost circuit by
+      communicating on the MDSYNC bus. The active amplifier controls the boost
+      circuit using combined data from both amplifiers. GPIO1 should be
+      configured for Sync when shared boost is used. Shared boost is not
+      compatible with External boost. Active amplifier requires
+      boost-peak-milliamp, boost-ind-nanohenry and boost-cap-microfarad.
       0 = Internal Boost
       1 = External Boost
+      2 = Shared Boost Active
+      3 = Shared Boost Passive
     $ref: "/schemas/types.yaml#/definitions/uint32"
     minimum: 0
-    maximum: 1
+    maximum: 3
 
   cirrus,gpio1-polarity-invert:
     description: