@@ -504,6 +504,8 @@ int main(int argc, char *argv[])
if (!loop)
goto done;
break;
+ case TASKSTATS_TYPE_NULL:
+ break;
default:
fprintf(stderr, "Unknown nested"
" nla_type %d\n",
@@ -511,7 +513,8 @@ int main(int argc, char *argv[])
break;
}
len2 += NLA_ALIGN(na->nla_len);
- na = (struct nlattr *) ((char *) na + len2);
+ na = (struct nlattr *)((char *)na +
+ NLA_ALIGN(na->nla_len));
}
break;
@@ -28,11 +28,6 @@ The serial core provides a few helper functions. This includes identifing
the correct port structure (via uart_get_console) and decoding command line
arguments (uart_parse_options).
-There is also a helper function (uart_write_console) which performs a
-character by character write, translating newlines to CRLF sequences.
-Driver writers are recommended to use this function rather than implementing
-their own version.
-
Locking
-------
@@ -195,9 +195,6 @@ TTY_IO_ERROR If set, causes all subsequent userspace read/write
TTY_OTHER_CLOSED Device is a pty and the other side has closed.
-TTY_OTHER_DONE Device is a pty and the other side has closed and
- all pending input processing has been completed.
-
TTY_NO_WRITE_SPLIT Prevent driver from splitting up writes into
smaller chunks.
@@ -1,7 +1,7 @@
VERSION = 4
PATCHLEVEL = 2
SUBLEVEL = 8
-EXTRAVERSION = -ckt11
+EXTRAVERSION = -ckt12
NAME = Hare's hurried rump
# *DOCUMENTATION*
@@ -364,7 +364,7 @@ AFLAGS_MODULE =
LDFLAGS_MODULE =
CFLAGS_KERNEL =
AFLAGS_KERNEL =
-CFLAGS_GCOV = -fprofile-arcs -ftest-coverage
+CFLAGS_GCOV = -fprofile-arcs -ftest-coverage -fno-tree-loop-im
# Use USERINCLUDE when you must reference the UAPI directories only.
@@ -688,9 +688,10 @@ KBUILD_CFLAGS += $(call cc-option, -mno-global-merge,)
KBUILD_CFLAGS += $(call cc-option, -fcatch-undefined-behavior)
else
-# This warning generated too much noise in a regular build.
-# Use make W=1 to enable this warning (see scripts/Makefile.build)
+# These warnings generated too much noise in a regular build.
+# Use make W=1 to enable them (see scripts/Makefile.build)
KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable)
+KBUILD_CFLAGS += $(call cc-disable-warning, unused-const-variable)
endif
ifdef CONFIG_FRAME_POINTER
@@ -77,10 +77,10 @@ static int pci_mmap_resource(struct kobject *kobj,
if (i >= PCI_ROM_RESOURCE)
return -ENODEV;
- if (!__pci_mmap_fits(pdev, i, vma, sparse))
+ if (res->flags & IORESOURCE_MEM && iomem_is_exclusive(res->start))
return -EINVAL;
- if (iomem_is_exclusive(res->start))
+ if (!__pci_mmap_fits(pdev, i, vma, sparse))
return -EINVAL;
pcibios_resource_to_bus(pdev->bus, &bar, res);
@@ -277,14 +277,6 @@ choice
Say Y here if you want kernel low-level debugging support
on HI3620 UART.
- config DEBUG_HI3716_UART
- bool "Hisilicon Hi3716 Debug UART"
- depends on ARCH_HI3xxx
- select DEBUG_UART_PL01X
- help
- Say Y here if you want kernel low-level debugging support
- on HI3716 UART.
-
config DEBUG_HIGHBANK_UART
bool "Kernel low-level debugging messages via Highbank UART"
depends on ARCH_HIGHBANK
@@ -158,6 +158,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
kirkwood-ds109.dtb \
kirkwood-ds110jv10.dtb \
kirkwood-ds111.dtb \
+ kirkwood-ds112.dtb \
kirkwood-ds209.dtb \
kirkwood-ds210.dtb \
kirkwood-ds212.dtb \
@@ -243,7 +243,7 @@
button@2 {
label = "Factory Reset Button";
linux,code = <KEY_RESTART>;
- gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
};
};
@@ -258,7 +258,7 @@
};
sata {
- gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
default-state = "off";
};
};
@@ -311,7 +311,7 @@
&pinctrl {
keys_pin: keys-pin {
- marvell,pins = "mpp24", "mpp47";
+ marvell,pins = "mpp24", "mpp29";
marvell,function = "gpio";
};
@@ -302,13 +302,13 @@
button@1 {
label = "WPS";
linux,code = <KEY_WPS_BUTTON>;
- gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
};
button@2 {
label = "Factory Reset Button";
linux,code = <KEY_RESTART>;
- gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
};
};
@@ -296,6 +296,8 @@
compatible = "maxim,max8997-pmic";
reg = <0x66>;
+ interrupt-parent = <&gpx0>;
+ interrupts = <7 0>;
max8997,pmic-buck1-uses-gpio-dvs;
max8997,pmic-buck2-uses-gpio-dvs;
@@ -886,11 +886,14 @@ static int stage2_set_pmd_huge(struct kvm *kvm, struct kvm_mmu_memory_cache
VM_BUG_ON(pmd_present(*pmd) && pmd_pfn(*pmd) != pmd_pfn(*new_pmd));
old_pmd = *pmd;
- kvm_set_pmd(pmd, *new_pmd);
- if (pmd_present(old_pmd))
+ if (pmd_present(old_pmd)) {
+ pmd_clear(pmd);
kvm_tlb_flush_vmid_ipa(kvm, addr);
- else
+ } else {
get_page(virt_to_page(pmd));
+ }
+
+ kvm_set_pmd(pmd, *new_pmd);
return 0;
}
@@ -939,12 +942,14 @@ static int stage2_set_pte(struct kvm *kvm, struct kvm_mmu_memory_cache *cache,
/* Create 2nd stage page table mapping - Level 3 */
old_pte = *pte;
- kvm_set_pte(pte, *new_pte);
- if (pte_present(old_pte))
+ if (pte_present(old_pte)) {
+ kvm_set_pte(pte, __pte(0));
kvm_tlb_flush_vmid_ipa(kvm, addr);
- else
+ } else {
get_page(virt_to_page(pte));
+ }
+ kvm_set_pte(pte, *new_pte);
return 0;
}
@@ -2187,15 +2187,15 @@ static int _idle(struct omap_hwmod *oh)
pr_debug("omap_hwmod: %s: idling\n", oh->name);
+ if (_are_all_hardreset_lines_asserted(oh))
+ return 0;
+
if (oh->_state != _HWMOD_STATE_ENABLED) {
WARN(1, "omap_hwmod: %s: idle state can only be entered from enabled state\n",
oh->name);
return -EINVAL;
}
- if (_are_all_hardreset_lines_asserted(oh))
- return 0;
-
if (oh->class->sysc)
_idle_sysc(oh);
_del_initiator_dep(oh, mpu_oh);
@@ -2242,6 +2242,9 @@ static int _shutdown(struct omap_hwmod *oh)
int ret, i;
u8 prev_state;
+ if (_are_all_hardreset_lines_asserted(oh))
+ return 0;
+
if (oh->_state != _HWMOD_STATE_IDLE &&
oh->_state != _HWMOD_STATE_ENABLED) {
WARN(1, "omap_hwmod: %s: disabled state can only be entered from idle, or enabled state\n",
@@ -2249,9 +2252,6 @@ static int _shutdown(struct omap_hwmod *oh)
return -EINVAL;
}
- if (_are_all_hardreset_lines_asserted(oh))
- return 0;
-
pr_debug("omap_hwmod: %s: disabling\n", oh->name);
if (oh->class->pre_shutdown) {
@@ -77,7 +77,6 @@
* Section
*/
#define PMD_SECT_VALID (_AT(pmdval_t, 1) << 0)
-#define PMD_SECT_PROT_NONE (_AT(pmdval_t, 1) << 58)
#define PMD_SECT_USER (_AT(pmdval_t, 1) << 6) /* AP[1] */
#define PMD_SECT_RDONLY (_AT(pmdval_t, 1) << 7) /* AP[2] */
#define PMD_SECT_S (_AT(pmdval_t, 3) << 8)
@@ -285,6 +285,7 @@ void pmdp_splitting_flush(struct vm_area_struct *vma, unsigned long address,
#endif /* CONFIG_HAVE_RCU_TABLE_FREE */
#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
+#define pmd_present(pmd) pte_present(pmd_pte(pmd))
#define pmd_dirty(pmd) pte_dirty(pmd_pte(pmd))
#define pmd_young(pmd) pte_young(pmd_pte(pmd))
#define pmd_wrprotect(pmd) pte_pmd(pte_wrprotect(pmd_pte(pmd)))
@@ -293,7 +294,7 @@ void pmdp_splitting_flush(struct vm_area_struct *vma, unsigned long address,
#define pmd_mkwrite(pmd) pte_pmd(pte_mkwrite(pmd_pte(pmd)))
#define pmd_mkdirty(pmd) pte_pmd(pte_mkdirty(pmd_pte(pmd)))
#define pmd_mkyoung(pmd) pte_pmd(pte_mkyoung(pmd_pte(pmd)))
-#define pmd_mknotpresent(pmd) (__pmd(pmd_val(pmd) & ~PMD_TYPE_MASK))
+#define pmd_mknotpresent(pmd) (__pmd(pmd_val(pmd) & ~PMD_SECT_VALID))
#define __HAVE_ARCH_PMD_WRITE
#define pmd_write(pmd) pte_write(pmd_pte(pmd))
@@ -332,7 +333,6 @@ extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
unsigned long size, pgprot_t vma_prot);
#define pmd_none(pmd) (!pmd_val(pmd))
-#define pmd_present(pmd) (pmd_val(pmd))
#define pmd_bad(pmd) (!(pmd_val(pmd) & 2))
@@ -482,7 +482,8 @@ static const char *compat_hwcap_str[] = {
"idivt",
"vfpd32",
"lpae",
- "evtstrm"
+ "evtstrm",
+ NULL
};
static const char *compat_hwcap2_str[] = {
@@ -130,7 +130,7 @@ static void inject_abt64(struct kvm_vcpu *vcpu, bool is_iabt, unsigned long addr
esr |= (ESR_ELx_EC_IABT_CUR << ESR_ELx_EC_SHIFT);
if (!is_iabt)
- esr |= ESR_ELx_EC_DABT_LOW;
+ esr |= ESR_ELx_EC_DABT_LOW << ESR_ELx_EC_SHIFT;
vcpu_sys_reg(vcpu, ESR_EL1) = esr | ESR_ELx_FSC_EXTABT;
}
@@ -61,7 +61,7 @@ static inline int atomic_##op##_return(int i, atomic_t *v) \
" CMPT %0, #HI(0x02000000)\n" \
" BNZ 1b\n" \
: "=&d" (temp), "=&da" (result) \
- : "da" (&v->counter), "bd" (i) \
+ : "da" (&v->counter), "br" (i) \
: "cc"); \
\
smp_mb(); \
@@ -76,14 +76,14 @@ void ath79_ddr_set_pci_windows(void)
{
BUG_ON(!ath79_ddr_pci_win_base);
- __raw_writel(AR71XX_PCI_WIN0_OFFS, ath79_ddr_pci_win_base + 0);
- __raw_writel(AR71XX_PCI_WIN1_OFFS, ath79_ddr_pci_win_base + 1);
- __raw_writel(AR71XX_PCI_WIN2_OFFS, ath79_ddr_pci_win_base + 2);
- __raw_writel(AR71XX_PCI_WIN3_OFFS, ath79_ddr_pci_win_base + 3);
- __raw_writel(AR71XX_PCI_WIN4_OFFS, ath79_ddr_pci_win_base + 4);
- __raw_writel(AR71XX_PCI_WIN5_OFFS, ath79_ddr_pci_win_base + 5);
- __raw_writel(AR71XX_PCI_WIN6_OFFS, ath79_ddr_pci_win_base + 6);
- __raw_writel(AR71XX_PCI_WIN7_OFFS, ath79_ddr_pci_win_base + 7);
+ __raw_writel(AR71XX_PCI_WIN0_OFFS, ath79_ddr_pci_win_base + 0x0);
+ __raw_writel(AR71XX_PCI_WIN1_OFFS, ath79_ddr_pci_win_base + 0x4);
+ __raw_writel(AR71XX_PCI_WIN2_OFFS, ath79_ddr_pci_win_base + 0x8);
+ __raw_writel(AR71XX_PCI_WIN3_OFFS, ath79_ddr_pci_win_base + 0xc);
+ __raw_writel(AR71XX_PCI_WIN4_OFFS, ath79_ddr_pci_win_base + 0x10);
+ __raw_writel(AR71XX_PCI_WIN5_OFFS, ath79_ddr_pci_win_base + 0x14);
+ __raw_writel(AR71XX_PCI_WIN6_OFFS, ath79_ddr_pci_win_base + 0x18);
+ __raw_writel(AR71XX_PCI_WIN7_OFFS, ath79_ddr_pci_win_base + 0x1c);
}
EXPORT_SYMBOL_GPL(ath79_ddr_set_pci_windows);
@@ -31,13 +31,15 @@ static inline void prom_putchar_wait(void __iomem *reg, u32 mask, u32 val)
} while (1);
}
+#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
+
static void prom_putchar_ar71xx(unsigned char ch)
{
void __iomem *base = (void __iomem *)(KSEG1ADDR(AR71XX_UART_BASE));
- prom_putchar_wait(base + UART_LSR * 4, UART_LSR_THRE, UART_LSR_THRE);
+ prom_putchar_wait(base + UART_LSR * 4, BOTH_EMPTY, BOTH_EMPTY);
__raw_writel(ch, base + UART_TX * 4);
- prom_putchar_wait(base + UART_LSR * 4, UART_LSR_THRE, UART_LSR_THRE);
+ prom_putchar_wait(base + UART_LSR * 4, BOTH_EMPTY, BOTH_EMPTY);
}
static void prom_putchar_ar933x(unsigned char ch)
@@ -7,7 +7,7 @@
#address-cells = <1>;
#size-cells = <0>;
- mips-hpt-frequency = <163125000>;
+ mips-hpt-frequency = <175625000>;
cpu@0 {
compatible = "brcm,bmips5200";
@@ -51,7 +51,6 @@ extern void (*flush_cache_range)(struct vm_area_struct *vma,
unsigned long start, unsigned long end);
extern void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn);
extern void __flush_dcache_page(struct page *page);
-extern void __flush_icache_page(struct vm_area_struct *vma, struct page *page);
#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
static inline void flush_dcache_page(struct page *page)
@@ -77,11 +76,6 @@ static inline void flush_anon_page(struct vm_area_struct *vma,
static inline void flush_icache_page(struct vm_area_struct *vma,
struct page *page)
{
- if (!cpu_has_ic_fills_f_dc && (vma->vm_flags & VM_EXEC) &&
- Page_dcache_dirty(page)) {
- __flush_icache_page(vma, page);
- ClearPageDcacheDirty(page);
- }
}
extern void (*flush_icache_range)(unsigned long start, unsigned long end);
@@ -782,7 +782,7 @@ extern enum emulation_result kvm_mips_complete_mmio_load(struct kvm_vcpu *vcpu,
uint32_t kvm_mips_read_count(struct kvm_vcpu *vcpu);
void kvm_mips_write_count(struct kvm_vcpu *vcpu, uint32_t count);
-void kvm_mips_write_compare(struct kvm_vcpu *vcpu, uint32_t compare);
+void kvm_mips_write_compare(struct kvm_vcpu *vcpu, uint32_t compare, bool ack);
void kvm_mips_init_count(struct kvm_vcpu *vcpu);
int kvm_mips_set_count_ctl(struct kvm_vcpu *vcpu, s64 count_ctl);
int kvm_mips_set_count_resume(struct kvm_vcpu *vcpu, s64 count_resume);
@@ -67,6 +67,19 @@ static inline void restore_msa(struct task_struct *t)
_restore_msa(t);
}
+static inline void init_msa_upper(void)
+{
+ /*
+ * Check cpu_has_msa only if it's a constant. This will allow the
+ * compiler to optimise out code for CPUs without MSA without adding
+ * an extra redundant check for CPUs with MSA.
+ */
+ if (__builtin_constant_p(cpu_has_msa) && !cpu_has_msa)
+ return;
+
+ _init_msa_upper();
+}
+
#ifdef TOOLCHAIN_SUPPORTS_MSA
#define __BUILD_MSA_CTL_REG(name, cs) \
@@ -127,10 +127,14 @@ do { \
} \
} while(0)
+static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep, pte_t pteval);
+
#if defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_CPU_MIPS32)
#define pte_none(pte) (!(((pte).pte_high) & ~_PAGE_GLOBAL))
#define pte_present(pte) ((pte).pte_low & _PAGE_PRESENT)
+#define pte_no_exec(pte) ((pte).pte_low & _PAGE_NO_EXEC)
static inline void set_pte(pte_t *ptep, pte_t pte)
{
@@ -148,7 +152,6 @@ static inline void set_pte(pte_t *ptep, pte_t pte)
buddy->pte_high |= _PAGE_GLOBAL;
}
}
-#define set_pte_at(mm, addr, ptep, pteval) set_pte(ptep, pteval)
static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
{
@@ -166,6 +169,7 @@ static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *pt
#define pte_none(pte) (!(pte_val(pte) & ~_PAGE_GLOBAL))
#define pte_present(pte) (pte_val(pte) & _PAGE_PRESENT)
+#define pte_no_exec(pte) (pte_val(pte) & _PAGE_NO_EXEC)
/*
* Certain architectures need to do special things when pte's
@@ -218,7 +222,6 @@ static inline void set_pte(pte_t *ptep, pte_t pteval)
}
#endif
}
-#define set_pte_at(mm, addr, ptep, pteval) set_pte(ptep, pteval)
static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
{
@@ -234,6 +237,22 @@ static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *pt
}
#endif
+static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep, pte_t pteval)
+{
+ extern void __update_cache(unsigned long address, pte_t pte);
+
+ if (!pte_present(pteval))
+ goto cache_sync_done;
+
+ if (pte_present(*ptep) && (pte_pfn(*ptep) == pte_pfn(pteval)))
+ goto cache_sync_done;
+
+ __update_cache(addr, pteval);
+cache_sync_done:
+ set_pte(ptep, pteval);
+}
+
/*
* (pmds are folded into puds so this doesn't get actually called,
* but the define is needed for a generic inline function.)
@@ -428,15 +447,12 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
extern void __update_tlb(struct vm_area_struct *vma, unsigned long address,
pte_t pte);
-extern void __update_cache(struct vm_area_struct *vma, unsigned long address,
- pte_t pte);
static inline void update_mmu_cache(struct vm_area_struct *vma,
unsigned long address, pte_t *ptep)
{
pte_t pte = *ptep;
__update_tlb(vma, address, pte);
- __update_cache(vma, address, pte);
}
static inline void update_mmu_cache_pmd(struct vm_area_struct *vma,
@@ -28,7 +28,7 @@
#define __ARCH_SIGSYS
-#include <uapi/asm-generic/siginfo.h>
+#include <asm-generic/siginfo.h>
/* We can't use generic siginfo_t, because our si_code and si_errno are swapped */
typedef struct siginfo {
@@ -42,13 +42,13 @@ typedef struct siginfo {
/* kill() */
struct {
- pid_t _pid; /* sender's pid */
+ __kernel_pid_t _pid; /* sender's pid */
__ARCH_SI_UID_T _uid; /* sender's uid */
} _kill;
/* POSIX.1b timers */
struct {
- timer_t _tid; /* timer id */
+ __kernel_timer_t _tid; /* timer id */
int _overrun; /* overrun count */
char _pad[sizeof( __ARCH_SI_UID_T) - sizeof(int)];
sigval_t _sigval; /* same as below */
@@ -57,26 +57,26 @@ typedef struct siginfo {
/* POSIX.1b signals */
struct {
- pid_t _pid; /* sender's pid */
+ __kernel_pid_t _pid; /* sender's pid */
__ARCH_SI_UID_T _uid; /* sender's uid */
sigval_t _sigval;
} _rt;
/* SIGCHLD */
struct {
- pid_t _pid; /* which child */
+ __kernel_pid_t _pid; /* which child */
__ARCH_SI_UID_T _uid; /* sender's uid */
int _status; /* exit code */
- clock_t _utime;
- clock_t _stime;
+ __kernel_clock_t _utime;
+ __kernel_clock_t _stime;
} _sigchld;
/* IRIX SIGCHLD */
struct {
- pid_t _pid; /* which child */
- clock_t _utime;
+ __kernel_pid_t _pid; /* which child */
+ __kernel_clock_t _utime;
int _status; /* exit code */
- clock_t _stime;
+ __kernel_clock_t _stime;
} _irix_sigchld;
/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
@@ -118,6 +118,4 @@ typedef struct siginfo {
#define SI_TIMER __SI_CODE(__SI_TIMER, -3) /* sent by timer expiration */
#define SI_MESGQ __SI_CODE(__SI_MESGQ, -4) /* sent by real time mesq state change */
-#include <asm-generic/siginfo.h>
-
#endif /* _UAPI_ASM_SIGINFO_H */
@@ -93,7 +93,8 @@ NESTED(bmips_reset_nmi_vec, PT_SIZE, sp)
#if defined(CONFIG_CPU_BMIPS5000)
mfc0 k0, CP0_PRID
li k1, PRID_IMP_BMIPS5000
- andi k0, 0xff00
+ /* mask with PRID_IMP_BMIPS5000 to cover both variants */
+ andi k0, PRID_IMP_BMIPS5000
bne k0, k1, 1f
/* if we're not on core 0, this must be the SMP boot signal */
@@ -166,10 +167,12 @@ bmips_smp_entry:
2:
#endif /* CONFIG_CPU_BMIPS4350 || CONFIG_CPU_BMIPS4380 */
#if defined(CONFIG_CPU_BMIPS5000)
- /* set exception vector base */
+ /* mask with PRID_IMP_BMIPS5000 to cover both variants */
li k1, PRID_IMP_BMIPS5000
+ andi k0, PRID_IMP_BMIPS5000
bne k0, k1, 3f
+ /* set exception vector base */
la k0, ebase
lw k0, 0(k0)
mtc0 k0, $15, 1
@@ -263,6 +266,8 @@ LEAF(bmips_enable_xks01)
#endif /* CONFIG_CPU_BMIPS4380 */
#if defined(CONFIG_CPU_BMIPS5000)
li t1, PRID_IMP_BMIPS5000
+ /* mask with PRID_IMP_BMIPS5000 to cover both variants */
+ andi t2, PRID_IMP_BMIPS5000
bne t2, t1, 2f
mfc0 t0, $22, 5
@@ -688,21 +688,9 @@ int __compute_return_epc_for_insn(struct pt_regs *regs,
}
lose_fpu(1); /* Save FPU state for the emulator. */
reg = insn.i_format.rt;
- bit = 0;
- switch (insn.i_format.rs) {
- case bc1eqz_op:
- /* Test bit 0 */
- if (get_fpr32(¤t->thread.fpu.fpr[reg], 0)
- & 0x1)
- bit = 1;
- break;
- case bc1nez_op:
- /* Test bit 0 */
- if (!(get_fpr32(¤t->thread.fpu.fpr[reg], 0)
- & 0x1))
- bit = 1;
- break;
- }
+ bit = get_fpr32(¤t->thread.fpu.fpr[reg], 0) & 0x1;
+ if (insn.i_format.rs == bc1eqz_op)
+ bit = !bit;
own_fpu(1);
if (bit)
epc = epc + 4 +
@@ -1248,7 +1248,10 @@ static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu)
case PRID_IMP_BMIPS5000:
case PRID_IMP_BMIPS5200:
c->cputype = CPU_BMIPS5000;
- __cpu_name[cpu] = "Broadcom BMIPS5000";
+ if ((c->processor_id & PRID_IMP_MASK) == PRID_IMP_BMIPS5200)
+ __cpu_name[cpu] = "Broadcom BMIPS5200";
+ else
+ __cpu_name[cpu] = "Broadcom BMIPS5000";
set_elf_platform(cpu, "bmips5000");
c->options |= MIPS_CPU_ULRI;
break;
@@ -27,6 +27,7 @@
#include <asm/inst.h>
#include <asm/mips-r2-to-r6-emul.h>
#include <asm/local.h>
+#include <asm/mipsregs.h>
#include <asm/ptrace.h>
#include <asm/uaccess.h>
@@ -1250,10 +1251,10 @@ fpu_emul:
" j 10b\n"
" .previous\n"
" .section __ex_table,\"a\"\n"
- " .word 1b,8b\n"
- " .word 2b,8b\n"
- " .word 3b,8b\n"
- " .word 4b,8b\n"
+ STR(PTR) " 1b,8b\n"
+ STR(PTR) " 2b,8b\n"
+ STR(PTR) " 3b,8b\n"
+ STR(PTR) " 4b,8b\n"
" .previous\n"
" .set pop\n"
: "+&r"(rt), "=&r"(rs),
@@ -1325,10 +1326,10 @@ fpu_emul:
" j 10b\n"
" .previous\n"
" .section __ex_table,\"a\"\n"
- " .word 1b,8b\n"
- " .word 2b,8b\n"
- " .word 3b,8b\n"
- " .word 4b,8b\n"
+ STR(PTR) " 1b,8b\n"
+ STR(PTR) " 2b,8b\n"
+ STR(PTR) " 3b,8b\n"
+ STR(PTR) " 4b,8b\n"
" .previous\n"
" .set pop\n"
: "+&r"(rt), "=&r"(rs),
@@ -1396,10 +1397,10 @@ fpu_emul:
" j 9b\n"
" .previous\n"
" .section __ex_table,\"a\"\n"
- " .word 1b,8b\n"
- " .word 2b,8b\n"
- " .word 3b,8b\n"
- " .word 4b,8b\n"
+ STR(PTR) " 1b,8b\n"
+ STR(PTR) " 2b,8b\n"
+ STR(PTR) " 3b,8b\n"
+ STR(PTR) " 4b,8b\n"
" .previous\n"
" .set pop\n"
: "+&r"(rt), "=&r"(rs),
@@ -1466,10 +1467,10 @@ fpu_emul:
" j 9b\n"
" .previous\n"
" .section __ex_table,\"a\"\n"
- " .word 1b,8b\n"
- " .word 2b,8b\n"
- " .word 3b,8b\n"
- " .word 4b,8b\n"
+ STR(PTR) " 1b,8b\n"
+ STR(PTR) " 2b,8b\n"
+ STR(PTR) " 3b,8b\n"
+ STR(PTR) " 4b,8b\n"
" .previous\n"
" .set pop\n"
: "+&r"(rt), "=&r"(rs),
@@ -1581,14 +1582,14 @@ fpu_emul:
" j 9b\n"
" .previous\n"
" .section __ex_table,\"a\"\n"
- " .word 1b,8b\n"
- " .word 2b,8b\n"
- " .word 3b,8b\n"
- " .word 4b,8b\n"
- " .word 5b,8b\n"
- " .word 6b,8b\n"
- " .word 7b,8b\n"
- " .word 0b,8b\n"
+ STR(PTR) " 1b,8b\n"
+ STR(PTR) " 2b,8b\n"
+ STR(PTR) " 3b,8b\n"
+ STR(PTR) " 4b,8b\n"
+ STR(PTR) " 5b,8b\n"
+ STR(PTR) " 6b,8b\n"
+ STR(PTR) " 7b,8b\n"
+ STR(PTR) " 0b,8b\n"
" .previous\n"
" .set pop\n"
: "+&r"(rt), "=&r"(rs),
@@ -1700,14 +1701,14 @@ fpu_emul:
" j 9b\n"
" .previous\n"
" .section __ex_table,\"a\"\n"
- " .word 1b,8b\n"
- " .word 2b,8b\n"
- " .word 3b,8b\n"
- " .word 4b,8b\n"
- " .word 5b,8b\n"
- " .word 6b,8b\n"
- " .word 7b,8b\n"
- " .word 0b,8b\n"
+ STR(PTR) " 1b,8b\n"
+ STR(PTR) " 2b,8b\n"
+ STR(PTR) " 3b,8b\n"
+ STR(PTR) " 4b,8b\n"
+ STR(PTR) " 5b,8b\n"
+ STR(PTR) " 6b,8b\n"
+ STR(PTR) " 7b,8b\n"
+ STR(PTR) " 0b,8b\n"
" .previous\n"
" .set pop\n"
: "+&r"(rt), "=&r"(rs),
@@ -1819,14 +1820,14 @@ fpu_emul:
" j 9b\n"
" .previous\n"
" .section __ex_table,\"a\"\n"
- " .word 1b,8b\n"
- " .word 2b,8b\n"
- " .word 3b,8b\n"
- " .word 4b,8b\n"
- " .word 5b,8b\n"
- " .word 6b,8b\n"
- " .word 7b,8b\n"
- " .word 0b,8b\n"
+ STR(PTR) " 1b,8b\n"
+ STR(PTR) " 2b,8b\n"
+ STR(PTR) " 3b,8b\n"
+ STR(PTR) " 4b,8b\n"
+ STR(PTR) " 5b,8b\n"
+ STR(PTR) " 6b,8b\n"
+ STR(PTR) " 7b,8b\n"
+ STR(PTR) " 0b,8b\n"
" .previous\n"
" .set pop\n"
: "+&r"(rt), "=&r"(rs),
@@ -1937,14 +1938,14 @@ fpu_emul:
" j 9b\n"
" .previous\n"
" .section __ex_table,\"a\"\n"
- " .word 1b,8b\n"
- " .word 2b,8b\n"
- " .word 3b,8b\n"
- " .word 4b,8b\n"
- " .word 5b,8b\n"
- " .word 6b,8b\n"
- " .word 7b,8b\n"
- " .word 0b,8b\n"
+ STR(PTR) " 1b,8b\n"
+ STR(PTR) " 2b,8b\n"
+ STR(PTR) " 3b,8b\n"
+ STR(PTR) " 4b,8b\n"
+ STR(PTR) " 5b,8b\n"
+ STR(PTR) " 6b,8b\n"
+ STR(PTR) " 7b,8b\n"
+ STR(PTR) " 0b,8b\n"
" .previous\n"
" .set pop\n"
: "+&r"(rt), "=&r"(rs),
@@ -1999,7 +2000,7 @@ fpu_emul:
"j 2b\n"
".previous\n"
".section __ex_table,\"a\"\n"
- ".word 1b, 3b\n"
+ STR(PTR) " 1b,3b\n"
".previous\n"
: "=&r"(res), "+&r"(err)
: "r"(vaddr), "i"(SIGSEGV)
@@ -2057,7 +2058,7 @@ fpu_emul:
"j 2b\n"
".previous\n"
".section __ex_table,\"a\"\n"
- ".word 1b, 3b\n"
+ STR(PTR) " 1b,3b\n"
".previous\n"
: "+&r"(res), "+&r"(err)
: "r"(vaddr), "i"(SIGSEGV));
@@ -2118,7 +2119,7 @@ fpu_emul:
"j 2b\n"
".previous\n"
".section __ex_table,\"a\"\n"
- ".word 1b, 3b\n"
+ STR(PTR) " 1b,3b\n"
".previous\n"
: "=&r"(res), "+&r"(err)
: "r"(vaddr), "i"(SIGSEGV)
@@ -2181,7 +2182,7 @@ fpu_emul:
"j 2b\n"
".previous\n"
".section __ex_table,\"a\"\n"
- ".word 1b, 3b\n"
+ STR(PTR) " 1b,3b\n"
".previous\n"
: "+&r"(res), "+&r"(err)
: "r"(vaddr), "i"(SIGSEGV));
@@ -457,7 +457,7 @@ unsigned long notrace unwind_stack_by_address(unsigned long stack_page,
*sp + sizeof(*regs) <= stack_page + THREAD_SIZE - 32) {
regs = (struct pt_regs *)*sp;
pc = regs->cp0_epc;
- if (__kernel_text_address(pc)) {
+ if (!user_mode(regs) && __kernel_text_address(pc)) {
*sp = regs->regs[29];
*ra = regs->regs[31];
return pc;
@@ -582,11 +582,19 @@ int mips_get_process_fp_mode(struct task_struct *task)
return value;
}
+static void prepare_for_fp_mode_switch(void *info)
+{
+ struct mm_struct *mm = info;
+
+ if (current->mm == mm)
+ lose_fpu(1);
+}
+
int mips_set_process_fp_mode(struct task_struct *task, unsigned int value)
{
const unsigned int known_bits = PR_FP_MODE_FR | PR_FP_MODE_FRE;
- unsigned long switch_count;
struct task_struct *t;
+ int max_users;
/* Check the value is valid */
if (value & ~known_bits)
@@ -603,6 +611,9 @@ int mips_set_process_fp_mode(struct task_struct *task, unsigned int value)
if (!(value & PR_FP_MODE_FR) && cpu_has_fpu && cpu_has_mips_r6)
return -EOPNOTSUPP;
+ /* Proceed with the mode switch */
+ preempt_disable();
+
/* Save FP & vector context, then disable FPU & MSA */
if (task->signal == current->signal)
lose_fpu(1);
@@ -612,31 +623,17 @@ int mips_set_process_fp_mode(struct task_struct *task, unsigned int value)
smp_mb__after_atomic();
/*
- * If there are multiple online CPUs then wait until all threads whose
- * FP mode is about to change have been context switched. This approach
- * allows us to only worry about whether an FP mode switch is in
- * progress when FP is first used in a tasks time slice. Pretty much all
- * of the mode switch overhead can thus be confined to cases where mode
- * switches are actually occuring. That is, to here. However for the
- * thread performing the mode switch it may take a while...
+ * If there are multiple online CPUs then force any which are running
+ * threads in this process to lose their FPU context, which they can't
+ * regain until fp_mode_switching is cleared later.
*/
if (num_online_cpus() > 1) {
- spin_lock_irq(&task->sighand->siglock);
-
- for_each_thread(task, t) {
- if (t == current)
- continue;
-
- switch_count = t->nvcsw + t->nivcsw;
+ /* No need to send an IPI for the local CPU */
+ max_users = (task->mm == current->mm) ? 1 : 0;
- do {
- spin_unlock_irq(&task->sighand->siglock);
- cond_resched();
- spin_lock_irq(&task->sighand->siglock);
- } while ((t->nvcsw + t->nivcsw) == switch_count);
- }
-
- spin_unlock_irq(&task->sighand->siglock);
+ if (atomic_read(¤t->mm->mm_users) > max_users)
+ smp_call_function(prepare_for_fp_mode_switch,
+ (void *)current->mm, 1);
}
/*
@@ -661,6 +658,7 @@ int mips_set_process_fp_mode(struct task_struct *task, unsigned int value)
/* Allow threads to use FP again */
atomic_set(&task->mm->context.fp_mode_switching, 0);
+ preempt_enable();
return 0;
}
@@ -56,8 +56,7 @@ static void init_fp_ctx(struct task_struct *target)
/* Begin with data registers set to all 1s... */
memset(&target->thread.fpu.fpr, ~0, sizeof(target->thread.fpu.fpr));
- /* ...and FCSR zeroed */
- target->thread.fpu.fcr31 = 0;
+ /* FCSR has been preset by `mips_set_personality_nan'. */
/*
* Record that the target has "used" math, such that the context
@@ -79,6 +78,22 @@ void ptrace_disable(struct task_struct *child)
}
/*
+ * Poke at FCSR according to its mask. Don't set the cause bits as
+ * this is currently not handled correctly in FP context restoration
+ * and will cause an oops if a corresponding enable bit is set.
+ */
+static void ptrace_setfcr31(struct task_struct *child, u32 value)
+{
+ u32 fcr31;
+ u32 mask;
+
+ value &= ~FPU_CSR_ALL_X;
+ fcr31 = child->thread.fpu.fcr31;
+ mask = boot_cpu_data.fpu_msk31;
+ child->thread.fpu.fcr31 = (value & ~mask) | (fcr31 & mask);
+}
+
+/*
* Read a general register set. We always use the 64-bit format, even
* for 32-bit kernels and for 32-bit processes on a 64-bit kernel.
* Registers are sign extended to fill the available space.
@@ -158,9 +173,7 @@ int ptrace_setfpregs(struct task_struct *child, __u32 __user *data)
{
union fpureg *fregs;
u64 fpr_val;
- u32 fcr31;
u32 value;
- u32 mask;
int i;
if (!access_ok(VERIFY_READ, data, 33 * 8))
@@ -175,9 +188,7 @@ int ptrace_setfpregs(struct task_struct *child, __u32 __user *data)
}
__get_user(value, data + 64);
- fcr31 = child->thread.fpu.fcr31;
- mask = boot_cpu_data.fpu_msk31;
- child->thread.fpu.fcr31 = (value & ~mask) | (fcr31 & mask);
+ ptrace_setfcr31(child, value);
/* FIR may not be written. */
@@ -720,7 +731,7 @@ long arch_ptrace(struct task_struct *child, long request,
break;
#endif
case FPC_CSR:
- child->thread.fpu.fcr31 = data & ~FPU_CSR_ALL_X;
+ ptrace_setfcr31(child, data);
break;
case DSP_BASE ... DSP_BASE + 5: {
dspreg_t *dregs;
@@ -691,6 +691,9 @@ static void __init arch_mem_init(char **cmdline_p)
for_each_memblock(reserved, reg)
if (reg->size != 0)
reserve_bootmem(reg->base, reg->size, BOOTMEM_DEFAULT);
+
+ reserve_bootmem_region(__pa_symbol(&__nosave_begin),
+ __pa_symbol(&__nosave_end)); /* Reserve for hibernation */
}
static void __init resource_init(void)
@@ -143,7 +143,7 @@ static void show_backtrace(struct task_struct *task, const struct pt_regs *regs)
if (!task)
task = current;
- if (raw_show_trace || !__kernel_text_address(pc)) {
+ if (raw_show_trace || user_mode(regs) || !__kernel_text_address(pc)) {
show_raw_backtrace(sp);
return;
}
@@ -1229,7 +1229,7 @@ static int enable_restore_fp_context(int msa)
err = init_fpu();
if (msa && !err) {
enable_msa();
- _init_msa_upper();
+ init_msa_upper();
set_thread_flag(TIF_USEDMSA);
set_thread_flag(TIF_MSA_CTX_LIVE);
}
@@ -1292,7 +1292,7 @@ static int enable_restore_fp_context(int msa)
*/
prior_msa = test_and_set_thread_flag(TIF_MSA_CTX_LIVE);
if (!prior_msa && was_fpu_owner) {
- _init_msa_upper();
+ init_msa_upper();
goto out;
}
@@ -1309,7 +1309,7 @@ static int enable_restore_fp_context(int msa)
* of each vector register such that it cannot see data left
* behind by another task.
*/
- _init_msa_upper();
+ init_msa_upper();
} else {
/* We need to restore the vector context. */
restore_msa(current);
@@ -302,12 +302,31 @@ static inline ktime_t kvm_mips_count_time(struct kvm_vcpu *vcpu)
*/
static uint32_t kvm_mips_read_count_running(struct kvm_vcpu *vcpu, ktime_t now)
{
- ktime_t expires;
+ struct mips_coproc *cop0 = vcpu->arch.cop0;
+ ktime_t expires, threshold;
+ uint32_t count, compare;
int running;
- /* Is the hrtimer pending? */
+ /* Calculate the biased and scaled guest CP0_Count */
+ count = vcpu->arch.count_bias + kvm_mips_ktime_to_count(vcpu, now);
+ compare = kvm_read_c0_guest_compare(cop0);
+
+ /*
+ * Find whether CP0_Count has reached the closest timer interrupt. If
+ * not, we shouldn't inject it.
+ */
+ if ((int32_t)(count - compare) < 0)
+ return count;
+
+ /*
+ * The CP0_Count we're going to return has already reached the closest
+ * timer interrupt. Quickly check if it really is a new interrupt by
+ * looking at whether the interval until the hrtimer expiry time is
+ * less than 1/4 of the timer period.
+ */
expires = hrtimer_get_expires(&vcpu->arch.comparecount_timer);
- if (ktime_compare(now, expires) >= 0) {
+ threshold = ktime_add_ns(now, vcpu->arch.count_period / 4);
+ if (ktime_before(expires, threshold)) {
/*
* Cancel it while we handle it so there's no chance of
* interference with the timeout handler.
@@ -329,8 +348,7 @@ static uint32_t kvm_mips_read_count_running(struct kvm_vcpu *vcpu, ktime_t now)
}
}
- /* Return the biased and scaled guest CP0_Count */
- return vcpu->arch.count_bias + kvm_mips_ktime_to_count(vcpu, now);
+ return count;
}
/**
@@ -420,32 +438,6 @@ static void kvm_mips_resume_hrtimer(struct kvm_vcpu *vcpu,
}
/**
- * kvm_mips_update_hrtimer() - Update next expiry time of hrtimer.
- * @vcpu: Virtual CPU.
- *
- * Recalculates and updates the expiry time of the hrtimer. This can be used
- * after timer parameters have been altered which do not depend on the time that
- * the change occurs (in those cases kvm_mips_freeze_hrtimer() and
- * kvm_mips_resume_hrtimer() are used directly).
- *
- * It is guaranteed that no timer interrupts will be lost in the process.
- *
- * Assumes !kvm_mips_count_disabled(@vcpu) (guest CP0_Count timer is running).
- */
-static void kvm_mips_update_hrtimer(struct kvm_vcpu *vcpu)
-{
- ktime_t now;
- uint32_t count;
-
- /*
- * freeze_hrtimer takes care of a timer interrupts <= count, and
- * resume_hrtimer the hrtimer takes care of a timer interrupts > count.
- */
- now = kvm_mips_freeze_hrtimer(vcpu, &count);
- kvm_mips_resume_hrtimer(vcpu, now, count);
-}
-
-/**
* kvm_mips_write_count() - Modify the count and update timer.
* @vcpu: Virtual CPU.
* @count: Guest CP0_Count value to set.
@@ -540,23 +532,42 @@ int kvm_mips_set_count_hz(struct kvm_vcpu *vcpu, s64 count_hz)
* kvm_mips_write_compare() - Modify compare and update timer.
* @vcpu: Virtual CPU.
* @compare: New CP0_Compare value.
+ * @ack: Whether to acknowledge timer interrupt.
*
* Update CP0_Compare to a new value and update the timeout.
+ * If @ack, atomically acknowledge any pending timer interrupt, otherwise ensure
+ * any pending timer interrupt is preserved.
*/
-void kvm_mips_write_compare(struct kvm_vcpu *vcpu, uint32_t compare)
+void kvm_mips_write_compare(struct kvm_vcpu *vcpu, uint32_t compare, bool ack)
{
struct mips_coproc *cop0 = vcpu->arch.cop0;
+ int dc;
+ u32 old_compare = kvm_read_c0_guest_compare(cop0);
+ ktime_t now;
+ uint32_t count;
/* if unchanged, must just be an ack */
- if (kvm_read_c0_guest_compare(cop0) == compare)
+ if (old_compare == compare) {
+ if (!ack)
+ return;
+ kvm_mips_callbacks->dequeue_timer_int(vcpu);
+ kvm_write_c0_guest_compare(cop0, compare);
return;
+ }
+
+ /* freeze_hrtimer() takes care of timer interrupts <= count */
+ dc = kvm_mips_count_disabled(vcpu);
+ if (!dc)
+ now = kvm_mips_freeze_hrtimer(vcpu, &count);
+
+ if (ack)
+ kvm_mips_callbacks->dequeue_timer_int(vcpu);
- /* Update compare */
kvm_write_c0_guest_compare(cop0, compare);
- /* Update timeout if count enabled */
- if (!kvm_mips_count_disabled(vcpu))
- kvm_mips_update_hrtimer(vcpu);
+ /* resume_hrtimer() takes care of timer interrupts > count */
+ if (!dc)
+ kvm_mips_resume_hrtimer(vcpu, now, count);
}
/**
@@ -1095,9 +1106,9 @@ enum emulation_result kvm_mips_emulate_CP0(uint32_t inst, uint32_t *opc,
/* If we are writing to COMPARE */
/* Clear pending timer interrupt, if any */
- kvm_mips_callbacks->dequeue_timer_int(vcpu);
kvm_mips_write_compare(vcpu,
- vcpu->arch.gprs[rt]);
+ vcpu->arch.gprs[rt],
+ true);
} else if ((rd == MIPS_CP0_STATUS) && (sel == 0)) {
unsigned int old_val, val, change;
@@ -547,7 +547,7 @@ static int kvm_trap_emul_set_one_reg(struct kvm_vcpu *vcpu,
kvm_mips_write_count(vcpu, v);
break;
case KVM_REG_MIPS_CP0_COMPARE:
- kvm_mips_write_compare(vcpu, v);
+ kvm_mips_write_compare(vcpu, v, false);
break;
case KVM_REG_MIPS_CP0_CAUSE:
/*
@@ -2,7 +2,7 @@
#include "libgcc.h"
-long long __ashldi3(long long u, word_type b)
+long long notrace __ashldi3(long long u, word_type b)
{
DWunion uu, w;
word_type bm;
@@ -2,7 +2,7 @@
#include "libgcc.h"
-long long __ashrdi3(long long u, word_type b)
+long long notrace __ashrdi3(long long u, word_type b)
{
DWunion uu, w;
word_type bm;
@@ -2,7 +2,7 @@
#include "libgcc.h"
-word_type __cmpdi2(long long a, long long b)
+word_type notrace __cmpdi2(long long a, long long b)
{
const DWunion au = {
.ll = a
@@ -2,7 +2,7 @@
#include "libgcc.h"
-long long __lshrdi3(long long u, word_type b)
+long long notrace __lshrdi3(long long u, word_type b)
{
DWunion uu, w;
word_type bm;
@@ -2,7 +2,7 @@
#include "libgcc.h"
-word_type __ucmpdi2(unsigned long long a, unsigned long long b)
+word_type notrace __ucmpdi2(unsigned long long a, unsigned long long b)
{
const DWunion au = {.ll = a};
const DWunion bu = {.ll = b};
@@ -213,10 +213,10 @@ static void __init node_mem_init(unsigned int node)
BOOTMEM_DEFAULT);
if (node == 0 && node_end_pfn(0) >= (0xffffffff >> PAGE_SHIFT)) {
- /* Reserve 0xff800000~0xffffffff for RS780E integrated GPU */
+ /* Reserve 0xfe000000~0xffffffff for RS780E integrated GPU */
reserve_bootmem_node(NODE_DATA(node),
- (node_addrspace_offset | 0xff800000),
- 8 << 20, BOOTMEM_DEFAULT);
+ (node_addrspace_offset | 0xfe000000),
+ 32 << 20, BOOTMEM_DEFAULT);
}
sparse_memory_present_with_active_regions(node);
@@ -445,9 +445,11 @@ static int isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
case spec_op:
switch (insn.r_format.func) {
case jalr_op:
- regs->regs[insn.r_format.rd] =
- regs->cp0_epc + dec_insn.pc_inc +
- dec_insn.next_pc_inc;
+ if (insn.r_format.rd != 0) {
+ regs->regs[insn.r_format.rd] =
+ regs->cp0_epc + dec_insn.pc_inc +
+ dec_insn.next_pc_inc;
+ }
/* Fall through */
case jr_op:
/* For R6, JR already emulated in jalr_op */
@@ -973,9 +975,10 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
struct mm_decoded_insn dec_insn, void *__user *fault_addr)
{
unsigned long contpc = xcp->cp0_epc + dec_insn.pc_inc;
- unsigned int cond, cbit;
+ unsigned int cond, cbit, bit0;
mips_instruction ir;
int likely, pc_inc;
+ union fpureg *fpr;
u32 __user *wva;
u64 __user *dva;
u32 wval;
@@ -1187,14 +1190,14 @@ emul:
return SIGILL;
cond = likely = 0;
+ fpr = ¤t->thread.fpu.fpr[MIPSInst_RT(ir)];
+ bit0 = get_fpr32(fpr, 0) & 0x1;
switch (MIPSInst_RS(ir)) {
case bc1eqz_op:
- if (get_fpr32(¤t->thread.fpu.fpr[MIPSInst_RT(ir)], 0) & 0x1)
- cond = 1;
+ cond = bit0 == 0;
break;
case bc1nez_op:
- if (!(get_fpr32(¤t->thread.fpu.fpr[MIPSInst_RT(ir)], 0) & 0x1))
- cond = 1;
+ cond = bit0 != 0;
break;
}
goto branch_common;
@@ -447,6 +447,11 @@ static inline void local_r4k___flush_cache_all(void * args)
r4k_blast_scache();
break;
+ case CPU_BMIPS5000:
+ r4k_blast_scache();
+ __sync();
+ break;
+
default:
r4k_blast_dcache();
r4k_blast_icache();
@@ -1305,6 +1310,12 @@ static void probe_pcache(void)
c->icache.flags |= MIPS_CACHE_IC_F_DC;
break;
+ case CPU_BMIPS5000:
+ c->icache.flags |= MIPS_CACHE_IC_F_DC;
+ /* Cache aliases are handled in hardware; allow HIGHMEM */
+ c->dcache.flags &= ~MIPS_CACHE_ALIASES;
+ break;
+
case CPU_LOONGSON2:
/*
* LOONGSON2 has 4 way icache, but when using indexed cache op,
@@ -1742,8 +1753,6 @@ void r4k_cache_init(void)
flush_icache_range = (void *)b5k_instruction_hazard;
local_flush_icache_range = (void *)b5k_instruction_hazard;
- /* Cache aliases are handled in hardware; allow HIGHMEM */
- current_cpu_data.dcache.flags &= ~MIPS_CACHE_ALIASES;
/* Optimization: an L2 flush implicitly flushes the L1 */
current_cpu_data.options |= MIPS_CPU_INCLUSIVE_CACHES;
@@ -119,33 +119,28 @@ void __flush_anon_page(struct page *page, unsigned long vmaddr)
EXPORT_SYMBOL(__flush_anon_page);
-void __flush_icache_page(struct vm_area_struct *vma, struct page *page)
-{
- unsigned long addr;
-
- if (PageHighMem(page))
- return;
-
- addr = (unsigned long) page_address(page);
- flush_data_cache_page(addr);
-}
-EXPORT_SYMBOL_GPL(__flush_icache_page);
-
-void __update_cache(struct vm_area_struct *vma, unsigned long address,
- pte_t pte)
+void __update_cache(unsigned long address, pte_t pte)
{
struct page *page;
unsigned long pfn, addr;
- int exec = (vma->vm_flags & VM_EXEC) && !cpu_has_ic_fills_f_dc;
+ int exec = !pte_no_exec(pte) && !cpu_has_ic_fills_f_dc;
pfn = pte_pfn(pte);
if (unlikely(!pfn_valid(pfn)))
return;
page = pfn_to_page(pfn);
- if (page_mapping(page) && Page_dcache_dirty(page)) {
- addr = (unsigned long) page_address(page);
+ if (Page_dcache_dirty(page)) {
+ if (PageHighMem(page))
+ addr = (unsigned long)kmap_atomic(page);
+ else
+ addr = (unsigned long)page_address(page);
+
if (exec || pages_do_alias(addr, address & PAGE_MASK))
flush_data_cache_page(addr);
+
+ if (PageHighMem(page))
+ __kunmap_atomic((void *)addr);
+
ClearPageDcacheDirty(page);
}
}
@@ -1071,7 +1071,7 @@ void eeh_add_device_early(struct pci_dn *pdn)
struct pci_controller *phb;
struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
- if (!edev || !eeh_enabled())
+ if (!edev)
return;
if (!eeh_has_flag(EEH_PROBE_MODE_DEVTREE))
@@ -166,6 +166,16 @@ static void *eeh_dev_save_state(void *data, void *userdata)
if (!edev)
return NULL;
+ /*
+ * We cannot access the config space on some adapters.
+ * Otherwise, it will cause fenced PHB. We don't save
+ * the content in their config space and will restore
+ * from the initial config space saved when the EEH
+ * device is created.
+ */
+ if (edev->pe && (edev->pe->state & EEH_PE_CFG_RESTRICTED))
+ return NULL;
+
pdev = eeh_dev_to_pci_dev(edev);
if (!pdev)
return NULL;
@@ -305,6 +315,19 @@ static void *eeh_dev_restore_state(void *data, void *userdata)
if (!edev)
return NULL;
+ /*
+ * The content in the config space isn't saved because
+ * the blocked config space on some adapters. We have
+ * to restore the initial saved config space when the
+ * EEH device is created.
+ */
+ if (edev->pe && (edev->pe->state & EEH_PE_CFG_RESTRICTED)) {
+ if (list_is_last(&edev->list, &edev->pe->edevs))
+ eeh_pe_restore_bars(edev->pe);
+
+ return NULL;
+ }
+
pdev = eeh_dev_to_pci_dev(edev);
if (!pdev)
return NULL;
@@ -502,9 +525,6 @@ int eeh_pe_reset_and_recover(struct eeh_pe *pe)
/* Save states */
eeh_pe_dev_traverse(pe, eeh_dev_save_state, NULL);
- /* Report error */
- eeh_pe_dev_traverse(pe, eeh_report_error, &result);
-
/* Issue reset */
ret = eeh_reset_pe(pe);
if (ret) {
@@ -962,11 +962,6 @@ hv_facility_unavailable_relon_trampoline:
#endif
STD_RELON_EXCEPTION_PSERIES(0x5700, 0x1700, altivec_assist)
- /* Other future vectors */
- .align 7
- .globl __end_interrupts
-__end_interrupts:
-
.align 7
system_call_entry:
b system_call_common
@@ -1253,6 +1248,17 @@ __end_handlers:
STD_RELON_EXCEPTION_PSERIES_OOL(0xf60, facility_unavailable)
STD_RELON_EXCEPTION_HV_OOL(0xf80, hv_facility_unavailable)
+ /*
+ * The __end_interrupts marker must be past the out-of-line (OOL)
+ * handlers, so that they are copied to real address 0x100 when running
+ * a relocatable kernel. This ensures they can be reached from the short
+ * trampoline handlers (like 0x4f00, 0x4f20, etc.) which branch
+ * directly, without using LOAD_HANDLER().
+ */
+ .align 7
+ .globl __end_interrupts
+__end_interrupts:
+
#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV)
/*
* Data area reserved for FWNMI option.
@@ -1818,9 +1818,11 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr)
case 4:
__get_user_asmx(val, op.ea, err, "lwarx");
break;
+#ifdef __powerpc64__
case 8:
__get_user_asmx(val, op.ea, err, "ldarx");
break;
+#endif
default:
return 0;
}
@@ -1841,9 +1843,11 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr)
case 4:
__put_user_asmx(op.val, op.ea, err, "stwcx.", cr);
break;
+#ifdef __powerpc64__
case 8:
__put_user_asmx(op.val, op.ea, err, "stdcx.", cr);
break;
+#endif
default:
return 0;
}
@@ -372,7 +372,7 @@ void __init vmem_map_init(void)
ro_end = (unsigned long)&_eshared & PAGE_MASK;
for_each_memblock(memory, reg) {
start = reg->base;
- end = reg->base + reg->size - 1;
+ end = reg->base + reg->size;
if (start >= ro_end || end <= ro_start)
vmem_add_mem(start, end - start, 0);
else if (start >= ro_start && end <= ro_end)
@@ -44,8 +44,6 @@ static bool msr_mtrr_valid(unsigned msr)
case MSR_MTRRdefType:
case MSR_IA32_CR_PAT:
return true;
- case 0x2f8:
- return true;
}
return false;
}
@@ -4795,8 +4795,8 @@ static void vmx_vcpu_reset(struct kvm_vcpu *vcpu, bool init_event)
vmcs_write16(VIRTUAL_PROCESSOR_ID, vmx->vpid);
cr0 = X86_CR0_NW | X86_CR0_CD | X86_CR0_ET;
- vmx_set_cr0(vcpu, cr0); /* enter rmode */
vmx->vcpu.arch.cr0 = cr0;
+ vmx_set_cr0(vcpu, cr0); /* enter rmode */
vmx_set_cr4(vcpu, 0);
vmx_set_efer(vcpu, 0);
vmx_fpu_activate(vcpu);
@@ -554,9 +554,16 @@ static void twinhead_reserve_killing_zone(struct pci_dev *dev)
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x27B9, twinhead_reserve_killing_zone);
+/*
+ * Broadwell EP Home Agent BARs erroneously return non-zero values when read.
+ *
+ * See http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v4-spec-update.html
+ * entry BDF2.
+ */
static void pci_bdwep_bar(struct pci_dev *dev)
{
dev->non_compliant_bars = 1;
}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6f60, pci_bdwep_bar);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fa0, pci_bdwep_bar);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fc0, pci_bdwep_bar);
@@ -488,8 +488,11 @@ int __init pci_xen_initial_domain(void)
#endif
__acpi_register_gsi = acpi_register_gsi_xen;
__acpi_unregister_gsi = NULL;
- /* Pre-allocate legacy irqs */
- for (irq = 0; irq < nr_legacy_irqs(); irq++) {
+ /*
+ * Pre-allocate the legacy IRQs. Use NR_LEGACY_IRQS here
+ * because we don't have a PIC and thus nr_legacy_irqs() is zero.
+ */
+ for (irq = 0; irq < NR_IRQS_LEGACY; irq++) {
int trigger, polarity;
if (acpi_get_override_irq(irq, &trigger, &polarity) == -1)
@@ -1488,7 +1488,7 @@ static struct blk_mq_tags *blk_mq_init_rq_map(struct blk_mq_tag_set *set,
int to_do;
void *p;
- while (left < order_to_size(this_order - 1) && this_order)
+ while (this_order && left < order_to_size(this_order - 1))
this_order--;
do {
@@ -139,7 +139,7 @@ static struct osi_linux {
unsigned int enable:1;
unsigned int dmi:1;
unsigned int cmdline:1;
- unsigned int default_disabling:1;
+ u8 default_disabling;
} osi_linux = {0, 0, 0, 0};
static u32 acpi_osi_handler(acpi_string interface, u32 supported)
@@ -1473,10 +1473,13 @@ void __init acpi_osi_setup(char *str)
if (*str == '!') {
str++;
if (*str == '\0') {
- osi_linux.default_disabling = 1;
+ /* Do not override acpi_osi=!* */
+ if (!osi_linux.default_disabling)
+ osi_linux.default_disabling =
+ ACPI_DISABLE_ALL_VENDOR_STRINGS;
return;
} else if (*str == '*') {
- acpi_update_interfaces(ACPI_DISABLE_ALL_STRINGS);
+ osi_linux.default_disabling = ACPI_DISABLE_ALL_STRINGS;
for (i = 0; i < OSI_STRING_ENTRIES_MAX; i++) {
osi = &osi_setup_entries[i];
osi->enable = false;
@@ -1549,10 +1552,13 @@ static void __init acpi_osi_setup_late(void)
acpi_status status;
if (osi_linux.default_disabling) {
- status = acpi_update_interfaces(ACPI_DISABLE_ALL_VENDOR_STRINGS);
+ status = acpi_update_interfaces(osi_linux.default_disabling);
if (ACPI_SUCCESS(status))
- printk(KERN_INFO PREFIX "Disabled all _OSI OS vendors\n");
+ printk(KERN_INFO PREFIX "Disabled all _OSI OS vendors%s\n",
+ osi_linux.default_disabling ==
+ ACPI_DISABLE_ALL_STRINGS ?
+ " and feature groups" : "");
}
for (i = 0; i < OSI_STRING_ENTRIES_MAX; i++) {
@@ -492,23 +492,22 @@ static void acpi_global_event_handler(u32 event_type, acpi_handle device,
static int get_status(u32 index, acpi_event_status *status,
acpi_handle *handle)
{
- int result = 0;
+ int result;
if (index >= num_gpes + ACPI_NUM_FIXED_EVENTS)
- goto end;
+ return -EINVAL;
if (index < num_gpes) {
result = acpi_get_gpe_device(index, handle);
if (result) {
ACPI_EXCEPTION((AE_INFO, AE_NOT_FOUND,
"Invalid GPE 0x%x", index));
- goto end;
+ return result;
}
result = acpi_get_gpe_status(*handle, index, status);
} else if (index < (num_gpes + ACPI_NUM_FIXED_EVENTS))
result = acpi_get_event_status(index - num_gpes, status);
-end:
return result;
}
@@ -924,15 +924,13 @@ static void sata_dwc_exec_command_by_tag(struct ata_port *ap,
struct ata_taskfile *tf,
u8 tag, u32 cmd_issued)
{
- unsigned long flags;
struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
dev_dbg(ap->dev, "%s cmd(0x%02x): %s tag=%d\n", __func__, tf->command,
ata_get_cmd_descript(tf->command), tag);
- spin_lock_irqsave(&ap->host->lock, flags);
hsdevp->cmd_issued[tag] = cmd_issued;
- spin_unlock_irqrestore(&ap->host->lock, flags);
+
/*
* Clear SError before executing a new command.
* sata_dwc_scr_write and read can not be used here. Clearing the PM
@@ -1262,14 +1262,15 @@ int dpm_suspend_late(pm_message_t state)
error = device_suspend_late(dev);
mutex_lock(&dpm_list_mtx);
+ if (!list_empty(&dev->power.entry))
+ list_move(&dev->power.entry, &dpm_late_early_list);
+
if (error) {
pm_dev_err(dev, state, " late", error);
dpm_save_failed_dev(dev_name(dev));
put_device(dev);
break;
}
- if (!list_empty(&dev->power.entry))
- list_move(&dev->power.entry, &dpm_late_early_list);
put_device(dev);
if (async_error)
@@ -1468,11 +1468,16 @@ int pm_runtime_force_resume(struct device *dev)
goto out;
}
- ret = callback(dev);
+ ret = pm_runtime_set_active(dev);
if (ret)
goto out;
- pm_runtime_set_active(dev);
+ ret = callback(dev);
+ if (ret) {
+ pm_runtime_set_suspended(dev);
+ goto out;
+ }
+
pm_runtime_mark_last_busy(dev);
out:
pm_runtime_enable(dev);
@@ -502,7 +502,7 @@ EXPORT_SYMBOL_GPL(regcache_mark_dirty);
* regcache_cache_bypass: Put a register map into cache bypass mode
*
* @map: map to configure
- * @cache_bypass: flag if changes should not be written to the hardware
+ * @cache_bypass: flag if changes should not be written to the cache
*
* When a register map is marked with the cache bypass option, writes
* to the register map API will only update the hardware and not the
@@ -50,6 +50,7 @@ struct vhci_data {
wait_queue_head_t read_wait;
struct sk_buff_head readq;
+ struct mutex open_mutex;
struct delayed_work open_timeout;
};
@@ -95,12 +96,15 @@ static int vhci_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
return 0;
}
-static int vhci_create_device(struct vhci_data *data, __u8 opcode)
+static int __vhci_create_device(struct vhci_data *data, __u8 opcode)
{
struct hci_dev *hdev;
struct sk_buff *skb;
__u8 dev_type;
+ if (data->hdev)
+ return -EBADFD;
+
/* bits 0-1 are dev_type (BR/EDR or AMP) */
dev_type = opcode & 0x03;
@@ -159,6 +163,17 @@ static int vhci_create_device(struct vhci_data *data, __u8 opcode)
return 0;
}
+static int vhci_create_device(struct vhci_data *data, __u8 opcode)
+{
+ int err;
+
+ mutex_lock(&data->open_mutex);
+ err = __vhci_create_device(data, opcode);
+ mutex_unlock(&data->open_mutex);
+
+ return err;
+}
+
static inline ssize_t vhci_get_user(struct vhci_data *data,
struct iov_iter *from)
{
@@ -197,11 +212,6 @@ static inline ssize_t vhci_get_user(struct vhci_data *data,
break;
case HCI_VENDOR_PKT:
- if (data->hdev) {
- kfree_skb(skb);
- return -EBADFD;
- }
-
cancel_delayed_work_sync(&data->open_timeout);
opcode = *((__u8 *) skb->data);
@@ -328,6 +338,7 @@ static int vhci_open(struct inode *inode, struct file *file)
skb_queue_head_init(&data->readq);
init_waitqueue_head(&data->read_wait);
+ mutex_init(&data->open_mutex);
INIT_DELAYED_WORK(&data->open_timeout, vhci_open_timeout);
file->private_data = data;
@@ -341,15 +352,18 @@ static int vhci_open(struct inode *inode, struct file *file)
static int vhci_release(struct inode *inode, struct file *file)
{
struct vhci_data *data = file->private_data;
- struct hci_dev *hdev = data->hdev;
+ struct hci_dev *hdev;
cancel_delayed_work_sync(&data->open_timeout);
+ hdev = data->hdev;
+
if (hdev) {
hci_unregister_dev(hdev);
hci_free_dev(hdev);
}
+ skb_queue_purge(&data->readq);
file->private_data = NULL;
kfree(data);
@@ -584,7 +584,6 @@ config TELCLOCK
config DEVPORT
bool
- depends on !M68K
depends on ISA || PCI
default y
@@ -1996,6 +1996,7 @@ static struct clk_branch gcc_crypto_clk = {
"crypto_clk_src",
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
@@ -2285,6 +2286,7 @@ static struct clk_branch gcc_prng_ahb_clk = {
"pcnoc_bfdcd_clk_src",
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
@@ -17,6 +17,7 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
static DEFINE_PER_CPU(unsigned int, cpu_is_managed);
static DEFINE_MUTEX(userspace_mutex);
@@ -31,6 +32,7 @@ static DEFINE_MUTEX(userspace_mutex);
static int cpufreq_set(struct cpufreq_policy *policy, unsigned int freq)
{
int ret = -EINVAL;
+ unsigned int *setspeed = policy->governor_data;
pr_debug("cpufreq_set for cpu %u, freq %u kHz\n", policy->cpu, freq);
@@ -38,6 +40,8 @@ static int cpufreq_set(struct cpufreq_policy *policy, unsigned int freq)
if (!per_cpu(cpu_is_managed, policy->cpu))
goto err;
+ *setspeed = freq;
+
ret = __cpufreq_driver_target(policy, freq, CPUFREQ_RELATION_L);
err:
mutex_unlock(&userspace_mutex);
@@ -49,19 +53,45 @@ static ssize_t show_speed(struct cpufreq_policy *policy, char *buf)
return sprintf(buf, "%u\n", policy->cur);
}
+static int cpufreq_userspace_policy_init(struct cpufreq_policy *policy)
+{
+ unsigned int *setspeed;
+
+ setspeed = kzalloc(sizeof(*setspeed), GFP_KERNEL);
+ if (!setspeed)
+ return -ENOMEM;
+
+ policy->governor_data = setspeed;
+ return 0;
+}
+
static int cpufreq_governor_userspace(struct cpufreq_policy *policy,
unsigned int event)
{
+ unsigned int *setspeed = policy->governor_data;
unsigned int cpu = policy->cpu;
int rc = 0;
+ if (event == CPUFREQ_GOV_POLICY_INIT)
+ return cpufreq_userspace_policy_init(policy);
+
+ if (!setspeed)
+ return -EINVAL;
+
switch (event) {
+ case CPUFREQ_GOV_POLICY_EXIT:
+ mutex_lock(&userspace_mutex);
+ policy->governor_data = NULL;
+ kfree(setspeed);
+ mutex_unlock(&userspace_mutex);
+ break;
case CPUFREQ_GOV_START:
BUG_ON(!policy->cur);
pr_debug("started managing cpu %u\n", cpu);
mutex_lock(&userspace_mutex);
per_cpu(cpu_is_managed, cpu) = 1;
+ *setspeed = policy->cur;
mutex_unlock(&userspace_mutex);
break;
case CPUFREQ_GOV_STOP:
@@ -69,20 +99,23 @@ static int cpufreq_governor_userspace(struct cpufreq_policy *policy,
mutex_lock(&userspace_mutex);
per_cpu(cpu_is_managed, cpu) = 0;
+ *setspeed = 0;
mutex_unlock(&userspace_mutex);
break;
case CPUFREQ_GOV_LIMITS:
mutex_lock(&userspace_mutex);
- pr_debug("limit event for cpu %u: %u - %u kHz, currently %u kHz\n",
- cpu, policy->min, policy->max,
- policy->cur);
+ pr_debug("limit event for cpu %u: %u - %u kHz, currently %u kHz, last set to %u kHz\n",
+ cpu, policy->min, policy->max, policy->cur, *setspeed);
- if (policy->max < policy->cur)
+ if (policy->max < *setspeed)
__cpufreq_driver_target(policy, policy->max,
CPUFREQ_RELATION_H);
- else if (policy->min > policy->cur)
+ else if (policy->min > *setspeed)
__cpufreq_driver_target(policy, policy->min,
CPUFREQ_RELATION_L);
+ else
+ __cpufreq_driver_target(policy, *setspeed,
+ CPUFREQ_RELATION_L);
mutex_unlock(&userspace_mutex);
break;
}
@@ -210,7 +210,7 @@ int cpuidle_enter_state(struct cpuidle_device *dev, struct cpuidle_driver *drv,
tick_broadcast_exit();
}
- if (!cpuidle_state_is_coupled(dev, drv, entered_state))
+ if (!cpuidle_state_is_coupled(dev, drv, index))
local_irq_enable();
diff = ktime_to_us(ktime_sub(time_end, time_start));
@@ -429,6 +429,8 @@ static void __cpuidle_unregister_device(struct cpuidle_device *dev)
list_del(&dev->device_list);
per_cpu(cpuidle_devices, dev->cpu) = NULL;
module_put(drv->owner);
+
+ dev->registered = 0;
}
static void __cpuidle_device_init(struct cpuidle_device *dev)
@@ -241,7 +241,7 @@ static void caam_jr_dequeue(unsigned long devarg)
struct device *caam_jr_alloc(void)
{
struct caam_drv_private_jr *jrpriv, *min_jrpriv = NULL;
- struct device *dev = NULL;
+ struct device *dev = ERR_PTR(-ENODEV);
int min_tfm_cnt = INT_MAX;
int tfm_cnt;
@@ -313,43 +313,55 @@ static int s5p_set_indata(struct s5p_aes_dev *dev, struct scatterlist *sg)
return err;
}
-static void s5p_aes_tx(struct s5p_aes_dev *dev)
+/*
+ * Returns true if new transmitting (output) data is ready and its
+ * address+length have to be written to device (by calling
+ * s5p_set_dma_outdata()). False otherwise.
+ */
+static bool s5p_aes_tx(struct s5p_aes_dev *dev)
{
int err = 0;
+ bool ret = false;
s5p_unset_outdata(dev);
if (!sg_is_last(dev->sg_dst)) {
err = s5p_set_outdata(dev, sg_next(dev->sg_dst));
- if (err) {
+ if (err)
s5p_aes_complete(dev, err);
- return;
- }
-
- s5p_set_dma_outdata(dev, dev->sg_dst);
+ else
+ ret = true;
} else {
s5p_aes_complete(dev, err);
dev->busy = true;
tasklet_schedule(&dev->tasklet);
}
+
+ return ret;
}
-static void s5p_aes_rx(struct s5p_aes_dev *dev)
+/*
+ * Returns true if new receiving (input) data is ready and its
+ * address+length have to be written to device (by calling
+ * s5p_set_dma_indata()). False otherwise.
+ */
+static bool s5p_aes_rx(struct s5p_aes_dev *dev)
{
int err;
+ bool ret = false;
s5p_unset_indata(dev);
if (!sg_is_last(dev->sg_src)) {
err = s5p_set_indata(dev, sg_next(dev->sg_src));
- if (err) {
+ if (err)
s5p_aes_complete(dev, err);
- return;
- }
-
- s5p_set_dma_indata(dev, dev->sg_src);
+ else
+ ret = true;
}
+
+ return ret;
}
static irqreturn_t s5p_aes_interrupt(int irq, void *dev_id)
@@ -358,19 +370,32 @@ static irqreturn_t s5p_aes_interrupt(int irq, void *dev_id)
struct s5p_aes_dev *dev = platform_get_drvdata(pdev);
uint32_t status;
unsigned long flags;
+ bool set_dma_tx = false;
+ bool set_dma_rx = false;
spin_lock_irqsave(&dev->lock, flags);
if (irq == dev->irq_fc) {
status = SSS_READ(dev, FCINTSTAT);
if (status & SSS_FCINTSTAT_BRDMAINT)
- s5p_aes_rx(dev);
+ set_dma_rx = s5p_aes_rx(dev);
if (status & SSS_FCINTSTAT_BTDMAINT)
- s5p_aes_tx(dev);
+ set_dma_tx = s5p_aes_tx(dev);
SSS_WRITE(dev, FCINTPEND, status);
}
+ /*
+ * Writing length of DMA block (either receiving or transmitting)
+ * will start the operation immediately, so this should be done
+ * at the end (even after clearing pending interrupts to not miss the
+ * interrupt).
+ */
+ if (set_dma_tx)
+ s5p_set_dma_outdata(dev, dev->sg_dst);
+ if (set_dma_rx)
+ s5p_set_dma_indata(dev, dev->sg_src);
+
spin_unlock_irqrestore(&dev->lock, flags);
return IRQ_HANDLED;
@@ -966,7 +966,7 @@ static void edac_inc_ue_error(struct mem_ctl_info *mci,
mci->ue_mc += count;
if (!enable_per_layer_report) {
- mci->ce_noinfo_count += count;
+ mci->ue_noinfo_count += count;
return;
}
@@ -194,12 +194,12 @@ int amdgpu_connector_get_monitor_bpc(struct drm_connector *connector)
bpc = 8;
DRM_DEBUG("%s: HDMI deep color 10 bpc exceeds max tmds clock. Using %d bpc.\n",
connector->name, bpc);
- } else if (bpc > 8) {
- /* max_tmds_clock missing, but hdmi spec mandates it for deep color. */
- DRM_DEBUG("%s: Required max tmds clock for HDMI deep color missing. Using 8 bpc.\n",
- connector->name);
- bpc = 8;
}
+ } else if (bpc > 8) {
+ /* max_tmds_clock missing, but hdmi spec mandates it for deep color. */
+ DRM_DEBUG("%s: Required max tmds clock for HDMI deep color missing. Using 8 bpc.\n",
+ connector->name);
+ bpc = 8;
}
}
@@ -150,7 +150,7 @@ u32 amdgpu_dpm_get_vrefresh(struct amdgpu_device *adev)
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
amdgpu_crtc = to_amdgpu_crtc(crtc);
if (crtc->enabled && amdgpu_crtc->enabled && amdgpu_crtc->hw_mode.clock) {
- vrefresh = amdgpu_crtc->hw_mode.vrefresh;
+ vrefresh = drm_mode_vrefresh(&amdgpu_crtc->hw_mode);
break;
}
}
@@ -1549,7 +1549,6 @@ static int drm_pick_crtcs(struct drm_fb_helper *fb_helper,
int n, int width, int height)
{
int c, o;
- struct drm_device *dev = fb_helper->dev;
struct drm_connector *connector;
const struct drm_connector_helper_funcs *connector_funcs;
struct drm_encoder *encoder;
@@ -1568,7 +1567,7 @@ static int drm_pick_crtcs(struct drm_fb_helper *fb_helper,
if (modes[n] == NULL)
return best_score;
- crtcs = kzalloc(dev->mode_config.num_connector *
+ crtcs = kzalloc(fb_helper->connector_count *
sizeof(struct drm_fb_helper_crtc *), GFP_KERNEL);
if (!crtcs)
return best_score;
@@ -1614,7 +1613,7 @@ static int drm_pick_crtcs(struct drm_fb_helper *fb_helper,
if (score > best_score) {
best_score = score;
memcpy(best_crtcs, crtcs,
- dev->mode_config.num_connector *
+ fb_helper->connector_count *
sizeof(struct drm_fb_helper_crtc *));
}
}
@@ -72,7 +72,7 @@ static const char *const dsi_errors[] = {
"RX Prot Violation",
"HS Generic Write FIFO Full",
"LP Generic Write FIFO Full",
- "Generic Read Data Avail"
+ "Generic Read Data Avail",
"Special Packet Sent",
"Tearing Effect",
};
@@ -762,12 +762,12 @@ static int i915_drm_resume(struct drm_device *dev)
dev_priv->display.hpd_irq_setup(dev);
spin_unlock_irq(&dev_priv->irq_lock);
+ intel_dp_mst_resume(dev);
+
drm_modeset_lock_all(dev);
intel_modeset_setup_hw_state(dev, true);
drm_modeset_unlock_all(dev);
- intel_dp_mst_resume(dev);
-
/*
* ... but also need to make sure that hotplug processing
* doesn't cause havoc. Like in the driver load code we don't
@@ -470,14 +470,13 @@ static void intel_dp_destroy_mst_connector(struct drm_dp_mst_topology_mgr *mgr,
{
struct intel_connector *intel_connector = to_intel_connector(connector);
struct drm_device *dev = connector->dev;
- /* need to nuke the connector */
- mutex_lock(&dev->mode_config.mutex);
- intel_connector_dpms(connector, DRM_MODE_DPMS_OFF);
- mutex_unlock(&dev->mode_config.mutex);
intel_connector->unregister(intel_connector);
+ /* need to nuke the connector */
mutex_lock(&dev->mode_config.mutex);
+ intel_connector_dpms(connector, DRM_MODE_DPMS_OFF);
+
intel_connector_remove_from_fbdev(intel_connector);
drm_connector_cleanup(connector);
mutex_unlock(&dev->mode_config.mutex);
@@ -600,12 +600,12 @@ static bool intel_dsi_get_hw_state(struct intel_encoder *encoder,
dpi_enabled = I915_READ(MIPI_PORT_CTRL(port)) &
DPI_ENABLE;
- /* Due to some hardware limitations on BYT, MIPI Port C DPI
- * Enable bit does not get set. To check whether DSI Port C
- * was enabled in BIOS, check the Pipe B enable bit
+ /*
+ * Due to some hardware limitations on VLV/CHV, the DPI enable
+ * bit in port C control register does not get set. As a
+ * workaround, check pipe B conf instead.
*/
- if (IS_VALLEYVIEW(dev) && !IS_CHERRYVIEW(dev) &&
- (port == PORT_C))
+ if ((IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) && port == PORT_C)
dpi_enabled = I915_READ(PIPECONF(PIPE_B)) &
PIPECONF_ENABLE;
@@ -387,12 +387,12 @@ static bool intel_fb_initial_config(struct drm_fb_helper *fb_helper,
uint64_t conn_configured = 0, mask;
int pass = 0;
- save_enabled = kcalloc(dev->mode_config.num_connector, sizeof(bool),
+ save_enabled = kcalloc(fb_helper->connector_count, sizeof(bool),
GFP_KERNEL);
if (!save_enabled)
return false;
- memcpy(save_enabled, enabled, dev->mode_config.num_connector);
+ memcpy(save_enabled, enabled, fb_helper->connector_count);
mask = (1 << fb_helper->connector_count) - 1;
retry:
for (i = 0; i < fb_helper->connector_count; i++) {
@@ -531,7 +531,7 @@ retry:
if (fallback) {
bail:
DRM_DEBUG_KMS("Not using firmware configuration\n");
- memcpy(enabled, save_enabled, dev->mode_config.num_connector);
+ memcpy(enabled, save_enabled, fb_helper->connector_count);
kfree(save_enabled);
return false;
}
@@ -3656,6 +3656,8 @@ static void ilk_pipe_wm_get_hw_state(struct drm_crtc *crtc)
if (IS_HASWELL(dev) || IS_BROADWELL(dev))
hw->wm_linetime[pipe] = I915_READ(PIPE_WM_LINETIME(pipe));
+ memset(active, 0, sizeof(*active));
+
active->pipe_enabled = intel_crtc->active;
if (active->pipe_enabled) {
@@ -103,19 +103,30 @@ static bool hv_need_to_signal(u32 old_write, struct hv_ring_buffer_info *rbi)
* there is room for the producer to send the pending packet.
*/
-static bool hv_need_to_signal_on_read(u32 old_rd,
- struct hv_ring_buffer_info *rbi)
+static bool hv_need_to_signal_on_read(struct hv_ring_buffer_info *rbi)
{
- u32 prev_write_sz;
u32 cur_write_sz;
u32 r_size;
- u32 write_loc = rbi->ring_buffer->write_index;
+ u32 write_loc;
u32 read_loc = rbi->ring_buffer->read_index;
- u32 pending_sz = rbi->ring_buffer->pending_send_sz;
+ u32 pending_sz;
/*
- * If the other end is not blocked on write don't bother.
+ * Issue a full memory barrier before making the signaling decision.
+ * Here is the reason for having this barrier:
+ * If the reading of the pend_sz (in this function)
+ * were to be reordered and read before we commit the new read
+ * index (in the calling function) we could
+ * have a problem. If the host were to set the pending_sz after we
+ * have sampled pending_sz and go to sleep before we commit the
+ * read index, we could miss sending the interrupt. Issue a full
+ * memory barrier to address this.
*/
+ mb();
+
+ pending_sz = rbi->ring_buffer->pending_send_sz;
+ write_loc = rbi->ring_buffer->write_index;
+ /* If the other end is not blocked on write don't bother. */
if (pending_sz == 0)
return false;
@@ -123,22 +134,13 @@ static bool hv_need_to_signal_on_read(u32 old_rd,
cur_write_sz = write_loc >= read_loc ? r_size - (write_loc - read_loc) :
read_loc - write_loc;
- prev_write_sz = write_loc >= old_rd ? r_size - (write_loc - old_rd) :
- old_rd - write_loc;
-
-
- if ((prev_write_sz < pending_sz) && (cur_write_sz >= pending_sz))
+ if (cur_write_sz >= pending_sz)
return true;
return false;
}
-/*
- * hv_get_next_write_location()
- *
- * Get the next write location for the specified ring buffer
- *
- */
+/* Get the next write location for the specified ring buffer. */
static inline u32
hv_get_next_write_location(struct hv_ring_buffer_info *ring_info)
{
@@ -147,12 +149,7 @@ hv_get_next_write_location(struct hv_ring_buffer_info *ring_info)
return next;
}
-/*
- * hv_set_next_write_location()
- *
- * Set the next write location for the specified ring buffer
- *
- */
+/* Set the next write location for the specified ring buffer. */
static inline void
hv_set_next_write_location(struct hv_ring_buffer_info *ring_info,
u32 next_write_location)
@@ -160,11 +157,7 @@ hv_set_next_write_location(struct hv_ring_buffer_info *ring_info,
ring_info->ring_buffer->write_index = next_write_location;
}
-/*
- * hv_get_next_read_location()
- *
- * Get the next read location for the specified ring buffer
- */
+/* Get the next read location for the specified ring buffer. */
static inline u32
hv_get_next_read_location(struct hv_ring_buffer_info *ring_info)
{
@@ -174,10 +167,8 @@ hv_get_next_read_location(struct hv_ring_buffer_info *ring_info)
}
/*
- * hv_get_next_readlocation_withoffset()
- *
* Get the next read location + offset for the specified ring buffer.
- * This allows the caller to skip
+ * This allows the caller to skip.
*/
static inline u32
hv_get_next_readlocation_withoffset(struct hv_ring_buffer_info *ring_info,
@@ -191,13 +182,7 @@ hv_get_next_readlocation_withoffset(struct hv_ring_buffer_info *ring_info,
return next;
}
-/*
- *
- * hv_set_next_read_location()
- *
- * Set the next read location for the specified ring buffer
- *
- */
+/* Set the next read location for the specified ring buffer. */
static inline void
hv_set_next_read_location(struct hv_ring_buffer_info *ring_info,
u32 next_read_location)
@@ -206,12 +191,7 @@ hv_set_next_read_location(struct hv_ring_buffer_info *ring_info,
}
-/*
- *
- * hv_get_ring_buffer()
- *
- * Get the start of the ring buffer
- */
+/* Get the start of the ring buffer. */
static inline void *
hv_get_ring_buffer(struct hv_ring_buffer_info *ring_info)
{
@@ -219,25 +199,14 @@ hv_get_ring_buffer(struct hv_ring_buffer_info *ring_info)
}
-/*
- *
- * hv_get_ring_buffersize()
- *
- * Get the size of the ring buffer
- */
+/* Get the size of the ring buffer. */
static inline u32
hv_get_ring_buffersize(struct hv_ring_buffer_info *ring_info)
{
return ring_info->ring_datasize;
}
-/*
- *
- * hv_get_ring_bufferindices()
- *
- * Get the read and write indices as u64 of the specified ring buffer
- *
- */
+/* Get the read and write indices as u64 of the specified ring buffer. */
static inline u64
hv_get_ring_bufferindices(struct hv_ring_buffer_info *ring_info)
{
@@ -245,12 +214,8 @@ hv_get_ring_bufferindices(struct hv_ring_buffer_info *ring_info)
}
/*
- *
- * hv_copyfrom_ringbuffer()
- *
* Helper routine to copy to source from ring buffer.
* Assume there is enough room. Handles wrap-around in src case only!!
- *
*/
static u32 hv_copyfrom_ringbuffer(
struct hv_ring_buffer_info *ring_info,
@@ -282,12 +247,8 @@ static u32 hv_copyfrom_ringbuffer(
/*
- *
- * hv_copyto_ringbuffer()
- *
* Helper routine to copy from source to ring buffer.
* Assume there is enough room. Handles wrap-around in dest case only!!
- *
*/
static u32 hv_copyto_ringbuffer(
struct hv_ring_buffer_info *ring_info,
@@ -313,13 +274,7 @@ static u32 hv_copyto_ringbuffer(
return start_write_offset;
}
-/*
- *
- * hv_ringbuffer_get_debuginfo()
- *
- * Get various debug metrics for the specified ring buffer
- *
- */
+/* Get various debug metrics for the specified ring buffer. */
void hv_ringbuffer_get_debuginfo(struct hv_ring_buffer_info *ring_info,
struct hv_ring_buffer_debug_info *debug_info)
{
@@ -342,13 +297,7 @@ void hv_ringbuffer_get_debuginfo(struct hv_ring_buffer_info *ring_info,
}
}
-/*
- *
- * hv_ringbuffer_init()
- *
- *Initialize the ring buffer
- *
- */
+/* Initialize the ring buffer. */
int hv_ringbuffer_init(struct hv_ring_buffer_info *ring_info,
void *buffer, u32 buflen)
{
@@ -361,9 +310,7 @@ int hv_ringbuffer_init(struct hv_ring_buffer_info *ring_info,
ring_info->ring_buffer->read_index =
ring_info->ring_buffer->write_index = 0;
- /*
- * Set the feature bit for enabling flow control.
- */
+ /* Set the feature bit for enabling flow control. */
ring_info->ring_buffer->feature_bits.value = 1;
ring_info->ring_size = buflen;
@@ -374,24 +321,12 @@ int hv_ringbuffer_init(struct hv_ring_buffer_info *ring_info,
return 0;
}
-/*
- *
- * hv_ringbuffer_cleanup()
- *
- * Cleanup the ring buffer
- *
- */
+/* Cleanup the ring buffer. */
void hv_ringbuffer_cleanup(struct hv_ring_buffer_info *ring_info)
{
}
-/*
- *
- * hv_ringbuffer_write()
- *
- * Write to the ring buffer
- *
- */
+/* Write to the ring buffer. */
int hv_ringbuffer_write(struct hv_ring_buffer_info *outring_info,
struct kvec *kv_list, u32 kv_count, bool *signal)
{
@@ -416,10 +351,11 @@ int hv_ringbuffer_write(struct hv_ring_buffer_info *outring_info,
&bytes_avail_toread,
&bytes_avail_towrite);
-
- /* If there is only room for the packet, assume it is full. */
- /* Otherwise, the next time around, we think the ring buffer */
- /* is empty since the read index == write index */
+ /*
+ * If there is only room for the packet, assume it is full.
+ * Otherwise, the next time around, we think the ring buffer
+ * is empty since the read index == write index.
+ */
if (bytes_avail_towrite <= totalbytes_towrite) {
spin_unlock_irqrestore(&outring_info->ring_lock, flags);
return -EAGAIN;
@@ -459,13 +395,7 @@ int hv_ringbuffer_write(struct hv_ring_buffer_info *outring_info,
}
-/*
- *
- * hv_ringbuffer_peek()
- *
- * Read without advancing the read index
- *
- */
+/* Read without advancing the read index. */
int hv_ringbuffer_peek(struct hv_ring_buffer_info *Inring_info,
void *Buffer, u32 buflen)
{
@@ -502,13 +432,7 @@ int hv_ringbuffer_peek(struct hv_ring_buffer_info *Inring_info,
}
-/*
- *
- * hv_ringbuffer_read()
- *
- * Read and advance the read index
- *
- */
+/* Read and advance the read index. */
int hv_ringbuffer_read(struct hv_ring_buffer_info *inring_info, void *buffer,
u32 buflen, u32 offset, bool *signal)
{
@@ -517,7 +441,6 @@ int hv_ringbuffer_read(struct hv_ring_buffer_info *inring_info, void *buffer,
u32 next_read_location = 0;
u64 prev_indices = 0;
unsigned long flags;
- u32 old_read;
if (buflen <= 0)
return -EINVAL;
@@ -528,8 +451,6 @@ int hv_ringbuffer_read(struct hv_ring_buffer_info *inring_info, void *buffer,
&bytes_avail_toread,
&bytes_avail_towrite);
- old_read = bytes_avail_toread;
-
/* Make sure there is something to read */
if (bytes_avail_toread < buflen) {
spin_unlock_irqrestore(&inring_info->ring_lock, flags);
@@ -550,9 +471,11 @@ int hv_ringbuffer_read(struct hv_ring_buffer_info *inring_info, void *buffer,
sizeof(u64),
next_read_location);
- /* Make sure all reads are done before we update the read index since */
- /* the writer may start writing to the read area once the read index */
- /*is updated */
+ /*
+ * Make sure all reads are done before we update the read index since
+ * the writer may start writing to the read area once the read index
+ * is updated.
+ */
mb();
/* Update the read index */
@@ -560,7 +483,7 @@ int hv_ringbuffer_read(struct hv_ring_buffer_info *inring_info, void *buffer,
spin_unlock_irqrestore(&inring_info->ring_lock, flags);
- *signal = hv_need_to_signal_on_read(old_read, inring_info);
+ *signal = hv_need_to_signal_on_read(inring_info);
return 0;
}
@@ -120,6 +120,7 @@ static int ads7828_probe(struct i2c_client *client,
unsigned int vref_mv = ADS7828_INT_VREF_MV;
bool diff_input = false;
bool ext_vref = false;
+ unsigned int regval;
data = devm_kzalloc(dev, sizeof(struct ads7828_data), GFP_KERNEL);
if (!data)
@@ -154,6 +155,15 @@ static int ads7828_probe(struct i2c_client *client,
if (!diff_input)
data->cmd_byte |= ADS7828_CMD_SD_SE;
+ /*
+ * Datasheet specifies internal reference voltage is disabled by
+ * default. The internal reference voltage needs to be enabled and
+ * voltage needs to settle before getting valid ADC data. So perform a
+ * dummy read to enable the internal reference voltage.
+ */
+ if (!ext_vref)
+ regmap_read(data->regmap, data->cmd_byte, ®val);
+
hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
data,
ads7828_groups);
@@ -313,7 +313,7 @@ int of_hwspin_lock_get_id(struct device_node *np, int index)
hwlock = radix_tree_deref_slot(slot);
if (unlikely(!hwlock))
continue;
- if (radix_tree_is_indirect_ptr(hwlock)) {
+ if (radix_tree_deref_retry(hwlock)) {
slot = radix_tree_iter_retry(&iter);
continue;
}
@@ -634,6 +634,7 @@ static int send_nlmsg_done(struct sk_buff *skb, u8 nl_client, int iwpm_pid)
if (!(ibnl_put_msg(skb, &nlh, 0, 0, nl_client,
RDMA_NL_IWPM_MAPINFO, NLM_F_MULTI))) {
pr_warn("%s Unable to put NLMSG_DONE\n", __func__);
+ dev_kfree_skb(skb);
return -ENOMEM;
}
nlh->nlmsg_type = NLMSG_DONE;
@@ -327,7 +327,7 @@ int cxio_destroy_cq(struct cxio_rdev *rdev_p, struct t3_cq *cq)
kfree(cq->sw_queue);
dma_free_coherent(&(rdev_p->rnic_info.pdev->dev),
(1UL << (cq->size_log2))
- * sizeof(struct t3_cqe), cq->queue,
+ * sizeof(struct t3_cqe) + 1, cq->queue,
dma_unmap_addr(cq, mapping));
cxio_hal_put_cqid(rdev_p->rscp, cq->cqid);
return err;
@@ -2807,7 +2807,7 @@ static int srp_add_target(struct srp_host *host, struct srp_target_port *target)
goto out;
}
- pr_debug(PFX "%s: SCSI scan succeeded - detected %d LUNs\n",
+ pr_debug("%s: SCSI scan succeeded - detected %d LUNs\n",
dev_name(&target->scsi_host->shost_gendev),
srp_sdev_count(target->scsi_host));
@@ -432,6 +432,10 @@ static void xpad360_process_packet(struct usb_xpad *xpad,
{
struct input_dev *dev = xpad->dev;
+ /* valid pad data */
+ if (data[0] != 0x00)
+ return;
+
/* digital pad */
if (xpad->mapping & MAP_DPAD_TO_BUTTONS) {
/* dpad as buttons (left, right, up, down) */
@@ -20,21 +20,40 @@
#include <linux/platform_device.h>
#include <linux/pwm.h>
#include <linux/slab.h>
+#include <linux/workqueue.h>
struct pwm_beeper {
struct input_dev *input;
struct pwm_device *pwm;
+ struct work_struct work;
unsigned long period;
};
#define HZ_TO_NANOSECONDS(x) (1000000000UL/(x))
+static void __pwm_beeper_set(struct pwm_beeper *beeper)
+{
+ unsigned long period = beeper->period;
+
+ if (period) {
+ pwm_config(beeper->pwm, period / 2, period);
+ pwm_enable(beeper->pwm);
+ } else
+ pwm_disable(beeper->pwm);
+}
+
+static void pwm_beeper_work(struct work_struct *work)
+{
+ struct pwm_beeper *beeper =
+ container_of(work, struct pwm_beeper, work);
+
+ __pwm_beeper_set(beeper);
+}
+
static int pwm_beeper_event(struct input_dev *input,
unsigned int type, unsigned int code, int value)
{
- int ret = 0;
struct pwm_beeper *beeper = input_get_drvdata(input);
- unsigned long period;
if (type != EV_SND || value < 0)
return -EINVAL;
@@ -49,22 +68,31 @@ static int pwm_beeper_event(struct input_dev *input,
return -EINVAL;
}
- if (value == 0) {
- pwm_disable(beeper->pwm);
- } else {
- period = HZ_TO_NANOSECONDS(value);
- ret = pwm_config(beeper->pwm, period / 2, period);
- if (ret)
- return ret;
- ret = pwm_enable(beeper->pwm);
- if (ret)
- return ret;
- beeper->period = period;
- }
+ if (value == 0)
+ beeper->period = 0;
+ else
+ beeper->period = HZ_TO_NANOSECONDS(value);
+
+ schedule_work(&beeper->work);
return 0;
}
+static void pwm_beeper_stop(struct pwm_beeper *beeper)
+{
+ cancel_work_sync(&beeper->work);
+
+ if (beeper->period)
+ pwm_disable(beeper->pwm);
+}
+
+static void pwm_beeper_close(struct input_dev *input)
+{
+ struct pwm_beeper *beeper = input_get_drvdata(input);
+
+ pwm_beeper_stop(beeper);
+}
+
static int pwm_beeper_probe(struct platform_device *pdev)
{
unsigned long pwm_id = (unsigned long)dev_get_platdata(&pdev->dev);
@@ -87,6 +115,8 @@ static int pwm_beeper_probe(struct platform_device *pdev)
goto err_free;
}
+ INIT_WORK(&beeper->work, pwm_beeper_work);
+
beeper->input = input_allocate_device();
if (!beeper->input) {
dev_err(&pdev->dev, "Failed to allocate input device\n");
@@ -106,6 +136,7 @@ static int pwm_beeper_probe(struct platform_device *pdev)
beeper->input->sndbit[0] = BIT(SND_TONE) | BIT(SND_BELL);
beeper->input->event = pwm_beeper_event;
+ beeper->input->close = pwm_beeper_close;
input_set_drvdata(beeper->input, beeper);
@@ -135,7 +166,6 @@ static int pwm_beeper_remove(struct platform_device *pdev)
input_unregister_device(beeper->input);
- pwm_disable(beeper->pwm);
pwm_free(beeper->pwm);
kfree(beeper);
@@ -147,8 +177,7 @@ static int __maybe_unused pwm_beeper_suspend(struct device *dev)
{
struct pwm_beeper *beeper = dev_get_drvdata(dev);
- if (beeper->period)
- pwm_disable(beeper->pwm);
+ pwm_beeper_stop(beeper);
return 0;
}
@@ -157,10 +186,8 @@ static int __maybe_unused pwm_beeper_resume(struct device *dev)
{
struct pwm_beeper *beeper = dev_get_drvdata(dev);
- if (beeper->period) {
- pwm_config(beeper->pwm, beeper->period / 2, beeper->period);
- pwm_enable(beeper->pwm);
- }
+ if (beeper->period)
+ __pwm_beeper_set(beeper);
return 0;
}
@@ -895,9 +895,15 @@ static long uinput_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
}
#ifdef CONFIG_COMPAT
+
+#define UI_SET_PHYS_COMPAT _IOW(UINPUT_IOCTL_BASE, 108, compat_uptr_t)
+
static long uinput_compat_ioctl(struct file *file,
unsigned int cmd, unsigned long arg)
{
+ if (cmd == UI_SET_PHYS_COMPAT)
+ cmd = UI_SET_PHYS;
+
return uinput_ioctl_handler(file, cmd, arg, compat_ptr(arg));
}
#endif
@@ -1552,18 +1552,14 @@ static int dmar_fault_do_one(struct intel_iommu *iommu, int type,
reason = dmar_get_fault_reason(fault_reason, &fault_type);
if (fault_type == INTR_REMAP)
- pr_err("INTR-REMAP: Request device [[%02x:%02x.%d] "
- "fault index %llx\n"
- "INTR-REMAP:[fault reason %02d] %s\n",
- (source_id >> 8), PCI_SLOT(source_id & 0xFF),
+ pr_err("[INTR-REMAP] Request device [%02x:%02x.%d] fault index %llx [fault reason %02d] %s\n",
+ source_id >> 8, PCI_SLOT(source_id & 0xFF),
PCI_FUNC(source_id & 0xFF), addr >> 48,
fault_reason, reason);
else
- pr_err("DMAR:[%s] Request device [%02x:%02x.%d] "
- "fault addr %llx \n"
- "DMAR:[fault reason %02d] %s\n",
- (type ? "DMA Read" : "DMA Write"),
- (source_id >> 8), PCI_SLOT(source_id & 0xFF),
+ pr_err("[%s] Request device [%02x:%02x.%d] fault addr %llx [fault reason %02d] %s\n",
+ type ? "DMA Read" : "DMA Write",
+ source_id >> 8, PCI_SLOT(source_id & 0xFF),
PCI_FUNC(source_id & 0xFF), addr, fault_reason, reason);
return 0;
}
@@ -1575,10 +1571,17 @@ irqreturn_t dmar_fault(int irq, void *dev_id)
int reg, fault_index;
u32 fault_status;
unsigned long flag;
+ bool ratelimited;
+ static DEFINE_RATELIMIT_STATE(rs,
+ DEFAULT_RATELIMIT_INTERVAL,
+ DEFAULT_RATELIMIT_BURST);
+
+ /* Disable printing, simply clear the fault when ratelimited */
+ ratelimited = !__ratelimit(&rs);
raw_spin_lock_irqsave(&iommu->register_lock, flag);
fault_status = readl(iommu->reg + DMAR_FSTS_REG);
- if (fault_status)
+ if (fault_status && !ratelimited)
pr_err("DRHD: handling fault status reg %x\n", fault_status);
/* TBD: ignore advanced fault log currently */
@@ -1600,24 +1603,28 @@ irqreturn_t dmar_fault(int irq, void *dev_id)
if (!(data & DMA_FRCD_F))
break;
- fault_reason = dma_frcd_fault_reason(data);
- type = dma_frcd_type(data);
+ if (!ratelimited) {
+ fault_reason = dma_frcd_fault_reason(data);
+ type = dma_frcd_type(data);
- data = readl(iommu->reg + reg +
- fault_index * PRIMARY_FAULT_REG_LEN + 8);
- source_id = dma_frcd_source_id(data);
+ data = readl(iommu->reg + reg +
+ fault_index * PRIMARY_FAULT_REG_LEN + 8);
+ source_id = dma_frcd_source_id(data);
+
+ guest_addr = dmar_readq(iommu->reg + reg +
+ fault_index * PRIMARY_FAULT_REG_LEN);
+ guest_addr = dma_frcd_page_addr(guest_addr);
+ }
- guest_addr = dmar_readq(iommu->reg + reg +
- fault_index * PRIMARY_FAULT_REG_LEN);
- guest_addr = dma_frcd_page_addr(guest_addr);
/* clear the fault */
writel(DMA_FRCD_F, iommu->reg + reg +
fault_index * PRIMARY_FAULT_REG_LEN + 12);
raw_spin_unlock_irqrestore(&iommu->register_lock, flag);
- dmar_fault_do_one(iommu, type, fault_reason,
- source_id, guest_addr);
+ if (!ratelimited)
+ dmar_fault_do_one(iommu, type, fault_reason,
+ source_id, guest_addr);
fault_index++;
if (fault_index >= cap_num_fault_regs(iommu->cap))
@@ -353,6 +353,13 @@ static asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs
if (irqnr < 16) {
gic_write_eoir(irqnr);
#ifdef CONFIG_SMP
+ /*
+ * Unlike GICv2, we don't need an smp_rmb() here.
+ * The control dependency from gic_read_iar to
+ * the ISB in gic_write_eoir is enough to ensure
+ * that any shared data read by handle_IPI will
+ * be read after the ACK.
+ */
handle_IPI(irqnr, regs);
#else
WARN_ONCE(true, "Unexpected SGI received!\n");
@@ -372,6 +379,15 @@ static void __init gic_dist_init(void)
writel_relaxed(0, base + GICD_CTLR);
gic_dist_wait_for_rwp();
+ /*
+ * Configure SPIs as non-secure Group-1. This will only matter
+ * if the GIC only has a single security state. This will not
+ * do the right thing if the kernel is running in secure mode,
+ * but that's not the intended use case anyway.
+ */
+ for (i = 32; i < gic_data.irq_nr; i += 32)
+ writel_relaxed(~0, base + GICD_IGROUPR + i / 8);
+
gic_dist_config(base, gic_data.irq_nr, gic_dist_wait_for_rwp);
/* Enable distributor with ARE, Group1 */
@@ -475,6 +491,9 @@ static void gic_cpu_init(void)
rbase = gic_data_rdist_sgi_base();
+ /* Configure SGIs/PPIs as non-secure Group-1 */
+ writel_relaxed(~0, rbase + GICR_IGROUPR0);
+
gic_cpu_config(rbase, gic_redist_wait_for_rwp);
/* Give LPIs a spin */
@@ -278,6 +278,14 @@ static void __exception_irq_entry gic_handle_irq(struct pt_regs *regs)
if (irqnr < 16) {
writel_relaxed(irqstat, cpu_base + GIC_CPU_EOI);
#ifdef CONFIG_SMP
+ /*
+ * Ensure any shared data written by the CPU sending
+ * the IPI is read after we've read the ACK register
+ * on the GIC.
+ *
+ * Pairs with the write barrier in gic_raise_softirq
+ */
+ smp_rmb();
handle_IPI(irqnr, regs);
#endif
continue;
@@ -57,7 +57,7 @@ static int chameleon_parse_gdd(struct mcb_bus *bus,
mdev->id = GDD_DEV(reg1);
mdev->rev = GDD_REV(reg1);
mdev->var = GDD_VAR(reg1);
- mdev->bar = GDD_BAR(reg1);
+ mdev->bar = GDD_BAR(reg2);
mdev->group = GDD_GRP(reg2);
mdev->inst = GDD_INS(reg2);
@@ -24,7 +24,7 @@ void cx23885_av_work_handler(struct work_struct *work)
{
struct cx23885_dev *dev =
container_of(work, struct cx23885_dev, cx25840_work);
- bool handled;
+ bool handled = false;
v4l2_subdev_call(dev->sd_cx25840, core, interrupt_service_routine,
PCI_MSK_AV_CORE, &handled);
@@ -1046,7 +1046,7 @@ static int vpfe_get_ccdc_image_format(struct vpfe_device *vpfe,
static int vpfe_config_ccdc_image_format(struct vpfe_device *vpfe)
{
enum ccdc_frmfmt frm_fmt = CCDC_FRMFMT_INTERLACED;
- int ret;
+ int ret = 0;
vpfe_dbg(2, vpfe, "vpfe_config_ccdc_image_format\n");
@@ -1705,7 +1705,7 @@ static int vpfe_get_app_input_index(struct vpfe_device *vpfe,
sdinfo = &cfg->sub_devs[i];
client = v4l2_get_subdevdata(sdinfo->sd);
if (client->addr == curr_client->addr &&
- client->adapter->nr == client->adapter->nr) {
+ client->adapter->nr == curr_client->adapter->nr) {
if (vpfe->current_input >= 1)
return -1;
*app_input_index = j + vpfe->current_input;
@@ -259,7 +259,8 @@ static int put_v4l2_format32(struct v4l2_format *kp, struct v4l2_format32 __user
static int put_v4l2_create32(struct v4l2_create_buffers *kp, struct v4l2_create_buffers32 __user *up)
{
if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_create_buffers32)) ||
- copy_to_user(up, kp, offsetof(struct v4l2_create_buffers32, format)))
+ copy_to_user(up, kp, offsetof(struct v4l2_create_buffers32, format)) ||
+ copy_to_user(up->reserved, kp->reserved, sizeof(kp->reserved)))
return -EFAULT;
return __put_v4l2_format32(&kp->format, &up->format);
}
@@ -48,8 +48,6 @@
/* The Quark I2C controller source clock */
#define INTEL_QUARK_I2C_CLK_HZ 33000000
-#define INTEL_QUARK_I2C_NCLK 1
-
struct intel_quark_mfd {
struct pci_dev *pdev;
struct clk *i2c_clk;
@@ -114,37 +112,32 @@ MODULE_DEVICE_TABLE(pci, intel_quark_mfd_ids);
static int intel_quark_register_i2c_clk(struct intel_quark_mfd *quark_mfd)
{
struct pci_dev *pdev = quark_mfd->pdev;
- struct clk_lookup *i2c_clk_lookup;
struct clk *i2c_clk;
- int ret;
-
- i2c_clk_lookup = devm_kcalloc(&pdev->dev, INTEL_QUARK_I2C_NCLK,
- sizeof(*i2c_clk_lookup), GFP_KERNEL);
- if (!i2c_clk_lookup)
- return -ENOMEM;
-
- i2c_clk_lookup[0].dev_id = INTEL_QUARK_I2C_CONTROLLER_CLK;
i2c_clk = clk_register_fixed_rate(&pdev->dev,
INTEL_QUARK_I2C_CONTROLLER_CLK, NULL,
CLK_IS_ROOT, INTEL_QUARK_I2C_CLK_HZ);
+ if (IS_ERR(i2c_clk))
+ return PTR_ERR(i2c_clk);
- quark_mfd->i2c_clk_lookup = i2c_clk_lookup;
quark_mfd->i2c_clk = i2c_clk;
+ quark_mfd->i2c_clk_lookup = clkdev_create(i2c_clk, NULL,
+ INTEL_QUARK_I2C_CONTROLLER_CLK);
- ret = clk_register_clkdevs(i2c_clk, i2c_clk_lookup,
- INTEL_QUARK_I2C_NCLK);
- if (ret)
- dev_err(&pdev->dev, "Fixed clk register failed: %d\n", ret);
+ if (!quark_mfd->i2c_clk_lookup) {
+ clk_unregister(quark_mfd->i2c_clk);
+ dev_err(&pdev->dev, "Fixed clk register failed\n");
+ return -ENOMEM;
+ }
- return ret;
+ return 0;
}
static void intel_quark_unregister_i2c_clk(struct pci_dev *pdev)
{
struct intel_quark_mfd *quark_mfd = dev_get_drvdata(&pdev->dev);
- if (!quark_mfd->i2c_clk || !quark_mfd->i2c_clk_lookup)
+ if (!quark_mfd->i2c_clk_lookup)
return;
clkdev_drop(quark_mfd->i2c_clk_lookup);
@@ -240,26 +233,34 @@ static int intel_quark_mfd_probe(struct pci_dev *pdev,
quark_mfd = devm_kzalloc(&pdev->dev, sizeof(*quark_mfd), GFP_KERNEL);
if (!quark_mfd)
return -ENOMEM;
+
quark_mfd->pdev = pdev;
+ dev_set_drvdata(&pdev->dev, quark_mfd);
ret = intel_quark_register_i2c_clk(quark_mfd);
if (ret)
return ret;
- dev_set_drvdata(&pdev->dev, quark_mfd);
-
ret = intel_quark_i2c_setup(pdev, &intel_quark_mfd_cells[MFD_I2C_BAR]);
if (ret)
- return ret;
+ goto err_unregister_i2c_clk;
ret = intel_quark_gpio_setup(pdev,
&intel_quark_mfd_cells[MFD_GPIO_BAR]);
if (ret)
- return ret;
+ goto err_unregister_i2c_clk;
- return mfd_add_devices(&pdev->dev, 0, intel_quark_mfd_cells,
- ARRAY_SIZE(intel_quark_mfd_cells), NULL, 0,
- NULL);
+ ret = mfd_add_devices(&pdev->dev, 0, intel_quark_mfd_cells,
+ ARRAY_SIZE(intel_quark_mfd_cells), NULL, 0,
+ NULL);
+ if (ret)
+ goto err_unregister_i2c_clk;
+
+ return 0;
+
+err_unregister_i2c_clk:
+ intel_quark_unregister_i2c_clk(pdev);
+ return ret;
}
static void intel_quark_mfd_remove(struct pci_dev *pdev)
@@ -112,7 +112,7 @@ static irqreturn_t lp8788_irq_handler(int irq, void *ptr)
struct lp8788_irq_data *irqd = ptr;
struct lp8788 *lp = irqd->lp;
u8 status[NUM_REGS], addr, mask;
- bool handled;
+ bool handled = false;
int i;
if (lp8788_read_multi_bytes(lp, LP8788_INT_1, status, NUM_REGS))
@@ -269,6 +269,8 @@ static int usbtll_omap_probe(struct platform_device *pdev)
if (IS_ERR(tll->ch_clk[i]))
dev_dbg(dev, "can't get clock : %s\n", clkname);
+ else
+ clk_prepare(tll->ch_clk[i]);
}
pm_runtime_put_sync(dev);
@@ -301,9 +303,12 @@ static int usbtll_omap_remove(struct platform_device *pdev)
tll_dev = NULL;
spin_unlock(&tll_lock);
- for (i = 0; i < tll->nch; i++)
- if (!IS_ERR(tll->ch_clk[i]))
+ for (i = 0; i < tll->nch; i++) {
+ if (!IS_ERR(tll->ch_clk[i])) {
+ clk_unprepare(tll->ch_clk[i]);
clk_put(tll->ch_clk[i]);
+ }
+ }
pm_runtime_disable(&pdev->dev);
return 0;
@@ -420,7 +425,7 @@ int omap_tll_enable(struct usbhs_omap_platform_data *pdata)
if (IS_ERR(tll->ch_clk[i]))
continue;
- r = clk_prepare_enable(tll->ch_clk[i]);
+ r = clk_enable(tll->ch_clk[i]);
if (r) {
dev_err(tll_dev,
"Error enabling ch %d clock: %d\n", i, r);
@@ -448,7 +453,7 @@ int omap_tll_disable(struct usbhs_omap_platform_data *pdata)
for (i = 0; i < tll->nch; i++) {
if (omap_usb_mode_needs_tll(pdata->port_mode[i])) {
if (!IS_ERR(tll->ch_clk[i]))
- clk_disable_unprepare(tll->ch_clk[i]);
+ clk_disable(tll->ch_clk[i]);
}
}
@@ -152,7 +152,7 @@ static void cxl_handle_page_fault(struct cxl_context *ctx,
access = _PAGE_PRESENT;
if (dsisr & CXL_PSL_DSISR_An_S)
access |= _PAGE_RW;
- if ((!ctx->kernel) || ~(dar & (1ULL << 63)))
+ if ((!ctx->kernel) || (REGION_ID(dar) == USER_REGION_ID))
access |= _PAGE_USER;
if (dsisr & DSISR_NOHPTE)
@@ -417,8 +417,10 @@ int mei_amthif_irq_read_msg(struct mei_cl *cl,
dev = cl->dev;
- if (dev->iamthif_state != MEI_IAMTHIF_READING)
+ if (dev->iamthif_state != MEI_IAMTHIF_READING) {
+ mei_irq_discard_msg(dev, mei_hdr);
return 0;
+ }
ret = mei_cl_irq_read_msg(cl, mei_hdr, cmpl_list);
if (ret)
@@ -1490,6 +1490,10 @@ void mei_cl_complete(struct mei_cl *cl, struct mei_cl_cb *cb)
wake_up(&cl->wait);
break;
+ case MEI_FOP_DISCONNECT_RSP:
+ mei_io_cb_free(cb);
+ mei_cl_set_disconnected(cl);
+ break;
default:
BUG_ON(0);
}
@@ -687,8 +687,7 @@ static int mei_hbm_fw_disconnect_req(struct mei_device *dev,
cb = mei_io_cb_init(cl, MEI_FOP_DISCONNECT_RSP, NULL);
if (!cb)
return -ENOMEM;
- cl_dbg(dev, cl, "add disconnect response as first\n");
- list_add(&cb->list, &dev->ctrl_wr_list.list);
+ list_add_tail(&cb->list, &dev->ctrl_wr_list.list);
}
return 0;
}
@@ -75,7 +75,6 @@ static inline int mei_cl_hbm_equal(struct mei_cl *cl,
* @dev: mei device
* @hdr: message header
*/
-static inline
void mei_irq_discard_msg(struct mei_device *dev, struct mei_msg_hdr *hdr)
{
/*
@@ -180,10 +179,7 @@ static int mei_cl_irq_disconnect_rsp(struct mei_cl *cl, struct mei_cl_cb *cb,
return -EMSGSIZE;
ret = mei_hbm_cl_disconnect_rsp(dev, cl);
- mei_cl_set_disconnected(cl);
- mei_io_cb_free(cb);
- mei_me_cl_put(cl->me_cl);
- cl->me_cl = NULL;
+ list_move_tail(&cb->list, &cmpl_list->list);
return ret;
}
@@ -768,6 +768,8 @@ bool mei_hbuf_acquire(struct mei_device *dev);
bool mei_write_is_idle(struct mei_device *dev);
+void mei_irq_discard_msg(struct mei_device *dev, struct mei_msg_hdr *hdr);
+
#if IS_ENABLED(CONFIG_DEBUG_FS)
int mei_dbgfs_register(struct mei_device *dev, const char *name);
void mei_dbgfs_deregister(struct mei_device *dev);
@@ -2411,11 +2411,12 @@ static const struct mmc_fixup blk_fixups[] =
MMC_QUIRK_BLK_NO_CMD23),
/*
- * Some Micron MMC cards needs longer data read timeout than
- * indicated in CSD.
+ * Some MMC cards need longer data read timeout than indicated in CSD.
*/
MMC_FIXUP(CID_NAME_ANY, CID_MANFID_MICRON, 0x200, add_quirk_mmc,
MMC_QUIRK_LONG_READ_TIME),
+ MMC_FIXUP("008GE0", CID_MANFID_TOSHIBA, CID_OEMID_ANY, add_quirk_mmc,
+ MMC_QUIRK_LONG_READ_TIME),
/*
* On these Samsung MoviNAND parts, performing secure erase or
@@ -866,11 +866,11 @@ void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card)
/*
* Some cards require longer data read timeout than indicated in CSD.
* Address this by setting the read timeout to a "reasonably high"
- * value. For the cards tested, 300ms has proven enough. If necessary,
+ * value. For the cards tested, 600ms has proven enough. If necessary,
* this value can be increased if other problematic cards require this.
*/
if (mmc_card_long_read_time(card) && data->flags & MMC_DATA_READ) {
- data->timeout_ns = 300000000;
+ data->timeout_ns = 600000000;
data->timeout_clks = 0;
}
@@ -333,6 +333,9 @@ static void mmc_manage_gp_partitions(struct mmc_card *card, u8 *ext_csd)
}
}
+/* Minimum partition switch timeout in milliseconds */
+#define MMC_MIN_PART_SWITCH_TIME 300
+
/*
* Decode extended CSD.
*/
@@ -397,6 +400,10 @@ static int mmc_decode_ext_csd(struct mmc_card *card, u8 *ext_csd)
/* EXT_CSD value is in units of 10ms, but we store in ms */
card->ext_csd.part_time = 10 * ext_csd[EXT_CSD_PART_SWITCH_TIME];
+ /* Some eMMC set the value too low so set a minimum */
+ if (card->ext_csd.part_time &&
+ card->ext_csd.part_time < MMC_MIN_PART_SWITCH_TIME)
+ card->ext_csd.part_time = MMC_MIN_PART_SWITCH_TIME;
/* Sleep / awake timeout in 100ns units */
if (sa_shift > 0 && sa_shift <= 0x17)
@@ -203,7 +203,7 @@ static const struct sdhci_acpi_slot sdhci_acpi_slot_int_emmc = {
.chip = &sdhci_acpi_chip_int,
.caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE |
MMC_CAP_HW_RESET | MMC_CAP_1_8V_DDR |
- MMC_CAP_BUS_WIDTH_TEST | MMC_CAP_WAIT_WHILE_BUSY,
+ MMC_CAP_WAIT_WHILE_BUSY,
.caps2 = MMC_CAP2_HC_ERASE_SZ,
.flags = SDHCI_ACPI_RUNTIME_PM,
.quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
@@ -216,7 +216,7 @@ static const struct sdhci_acpi_slot sdhci_acpi_slot_int_sdio = {
SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
.quirks2 = SDHCI_QUIRK2_HOST_OFF_CARD_ON,
.caps = MMC_CAP_NONREMOVABLE | MMC_CAP_POWER_OFF_CARD |
- MMC_CAP_BUS_WIDTH_TEST | MMC_CAP_WAIT_WHILE_BUSY,
+ MMC_CAP_WAIT_WHILE_BUSY,
.flags = SDHCI_ACPI_RUNTIME_PM,
.pm_caps = MMC_PM_KEEP_POWER,
.probe_slot = sdhci_acpi_sdio_probe_slot,
@@ -228,7 +228,7 @@ static const struct sdhci_acpi_slot sdhci_acpi_slot_int_sd = {
.quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
.quirks2 = SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON |
SDHCI_QUIRK2_STOP_WITH_TC,
- .caps = MMC_CAP_BUS_WIDTH_TEST | MMC_CAP_WAIT_WHILE_BUSY,
+ .caps = MMC_CAP_WAIT_WHILE_BUSY,
.probe_slot = sdhci_acpi_sd_probe_slot,
};
@@ -334,7 +334,6 @@ static int byt_emmc_probe_slot(struct sdhci_pci_slot *slot)
{
slot->host->mmc->caps |= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE |
MMC_CAP_HW_RESET | MMC_CAP_1_8V_DDR |
- MMC_CAP_BUS_WIDTH_TEST |
MMC_CAP_WAIT_WHILE_BUSY;
slot->host->mmc->caps2 |= MMC_CAP2_HC_ERASE_SZ;
slot->hw_reset = sdhci_pci_int_hw_reset;
@@ -350,15 +349,13 @@ static int byt_emmc_probe_slot(struct sdhci_pci_slot *slot)
static int byt_sdio_probe_slot(struct sdhci_pci_slot *slot)
{
slot->host->mmc->caps |= MMC_CAP_POWER_OFF_CARD | MMC_CAP_NONREMOVABLE |
- MMC_CAP_BUS_WIDTH_TEST |
MMC_CAP_WAIT_WHILE_BUSY;
return 0;
}
static int byt_sd_probe_slot(struct sdhci_pci_slot *slot)
{
- slot->host->mmc->caps |= MMC_CAP_BUS_WIDTH_TEST |
- MMC_CAP_WAIT_WHILE_BUSY;
+ slot->host->mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY;
slot->cd_con_id = NULL;
slot->cd_idx = 0;
slot->cd_override_level = true;
@@ -426,8 +426,25 @@ retry:
pnum, vol_id, lnum);
err = -EBADMSG;
} else {
- err = -EINVAL;
- ubi_ro_mode(ubi);
+ /*
+ * Ending up here in the non-Fastmap case
+ * is a clear bug as the VID header had to
+ * be present at scan time to have it referenced.
+ * With fastmap the story is more complicated.
+ * Fastmap has the mapping info without the need
+ * of a full scan. So the LEB could have been
+ * unmapped, Fastmap cannot know this and keeps
+ * the LEB referenced.
+ * This is valid and works as the layer above UBI
+ * has to do bookkeeping about used/referenced
+ * LEBs in any case.
+ */
+ if (ubi->fast_attach) {
+ err = -EBADMSG;
+ } else {
+ err = -EINVAL;
+ ubi_ro_mode(ubi);
+ }
}
}
goto out_free;
@@ -1058,6 +1058,7 @@ int ubi_scan_fastmap(struct ubi_device *ubi, struct ubi_attach_info *ai,
ubi_msg(ubi, "fastmap WL pool size: %d",
ubi->fm_wl_pool.max_size);
ubi->fm_disabled = 0;
+ ubi->fast_attach = 1;
ubi_free_vid_hdr(ubi, vh);
kfree(ech);
@@ -462,6 +462,7 @@ struct ubi_debug_info {
* @fm_eba_sem: allows ubi_update_fastmap() to block EBA table changes
* @fm_work: fastmap work queue
* @fm_work_scheduled: non-zero if fastmap work was scheduled
+ * @fast_attach: non-zero if UBI was attached by fastmap
*
* @used: RB-tree of used physical eraseblocks
* @erroneous: RB-tree of erroneous used physical eraseblocks
@@ -570,6 +571,7 @@ struct ubi_device {
size_t fm_size;
struct work_struct fm_work;
int fm_work_scheduled;
+ int fast_attach;
/* Wear-leveling sub-system's stuff */
struct rb_root used;
@@ -696,11 +696,17 @@ int can_change_mtu(struct net_device *dev, int new_mtu)
/* allow change of MTU according to the CANFD ability of the device */
switch (new_mtu) {
case CAN_MTU:
+ /* 'CANFD-only' controllers can not switch to CAN_MTU */
+ if (priv->ctrlmode_static & CAN_CTRLMODE_FD)
+ return -EINVAL;
+
priv->ctrlmode &= ~CAN_CTRLMODE_FD;
break;
case CANFD_MTU:
- if (!(priv->ctrlmode_supported & CAN_CTRLMODE_FD))
+ /* check for potential CANFD ability */
+ if (!(priv->ctrlmode_supported & CAN_CTRLMODE_FD) &&
+ !(priv->ctrlmode_static & CAN_CTRLMODE_FD))
return -EINVAL;
priv->ctrlmode |= CAN_CTRLMODE_FD;
@@ -782,6 +788,35 @@ static const struct nla_policy can_policy[IFLA_CAN_MAX + 1] = {
= { .len = sizeof(struct can_bittiming_const) },
};
+static int can_validate(struct nlattr *tb[], struct nlattr *data[])
+{
+ bool is_can_fd = false;
+
+ /* Make sure that valid CAN FD configurations always consist of
+ * - nominal/arbitration bittiming
+ * - data bittiming
+ * - control mode with CAN_CTRLMODE_FD set
+ */
+
+ if (data[IFLA_CAN_CTRLMODE]) {
+ struct can_ctrlmode *cm = nla_data(data[IFLA_CAN_CTRLMODE]);
+
+ is_can_fd = cm->flags & cm->mask & CAN_CTRLMODE_FD;
+ }
+
+ if (is_can_fd) {
+ if (!data[IFLA_CAN_BITTIMING] || !data[IFLA_CAN_DATA_BITTIMING])
+ return -EOPNOTSUPP;
+ }
+
+ if (data[IFLA_CAN_DATA_BITTIMING]) {
+ if (!is_can_fd || !data[IFLA_CAN_BITTIMING])
+ return -EOPNOTSUPP;
+ }
+
+ return 0;
+}
+
static int can_changelink(struct net_device *dev,
struct nlattr *tb[], struct nlattr *data[])
{
@@ -813,19 +848,31 @@ static int can_changelink(struct net_device *dev,
if (data[IFLA_CAN_CTRLMODE]) {
struct can_ctrlmode *cm;
+ u32 ctrlstatic;
+ u32 maskedflags;
/* Do not allow changing controller mode while running */
if (dev->flags & IFF_UP)
return -EBUSY;
cm = nla_data(data[IFLA_CAN_CTRLMODE]);
+ ctrlstatic = priv->ctrlmode_static;
+ maskedflags = cm->flags & cm->mask;
+
+ /* check whether provided bits are allowed to be passed */
+ if (cm->mask & ~(priv->ctrlmode_supported | ctrlstatic))
+ return -EOPNOTSUPP;
+
+ /* do not check for static fd-non-iso if 'fd' is disabled */
+ if (!(maskedflags & CAN_CTRLMODE_FD))
+ ctrlstatic &= ~CAN_CTRLMODE_FD_NON_ISO;
- /* check whether changed bits are allowed to be modified */
- if (cm->mask & ~priv->ctrlmode_supported)
+ /* make sure static options are provided by configuration */
+ if ((maskedflags & ctrlstatic) != ctrlstatic)
return -EOPNOTSUPP;
/* clear bits to be modified and copy the flag values */
priv->ctrlmode &= ~cm->mask;
- priv->ctrlmode |= (cm->flags & cm->mask);
+ priv->ctrlmode |= maskedflags;
/* CAN_CTRLMODE_FD can only be set when driver supports FD */
if (priv->ctrlmode & CAN_CTRLMODE_FD)
@@ -966,6 +1013,7 @@ static struct rtnl_link_ops can_link_ops __read_mostly = {
.maxtype = IFLA_CAN_MAX,
.policy = can_policy,
.setup = can_setup,
+ .validate = can_validate,
.newlink = can_newlink,
.changelink = can_changelink,
.get_size = can_get_size,
@@ -958,7 +958,7 @@ static struct net_device *alloc_m_can_dev(void)
priv->can.do_get_berr_counter = m_can_get_berr_counter;
/* CAN_CTRLMODE_FD_NON_ISO is fixed with M_CAN IP v3.0.1 */
- priv->can.ctrlmode = CAN_CTRLMODE_FD_NON_ISO;
+ can_set_static_ctrlmode(dev, CAN_CTRLMODE_FD_NON_ISO);
/* CAN_CTRLMODE_FD_NON_ISO can not be changed with M_CAN IP v3.0.1 */
priv->can.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK |
@@ -1169,16 +1169,15 @@ static void ehea_parse_eqe(struct ehea_adapter *adapter, u64 eqe)
ec = EHEA_BMASK_GET(NEQE_EVENT_CODE, eqe);
portnum = EHEA_BMASK_GET(NEQE_PORTNUM, eqe);
port = ehea_get_port(adapter, portnum);
+ if (!port) {
+ netdev_err(NULL, "unknown portnum %x\n", portnum);
+ return;
+ }
dev = port->netdev;
switch (ec) {
case EHEA_EC_PORTSTATE_CHG: /* port state change */
- if (!port) {
- netdev_err(dev, "unknown portnum %x\n", portnum);
- break;
- }
-
if (EHEA_BMASK_GET(NEQE_PORT_UP, eqe)) {
if (!netif_carrier_ok(dev)) {
ret = ehea_sense_port_attr(port);
@@ -49,7 +49,7 @@ i40e_status i40e_add_sd_table_entry(struct i40e_hw *hw,
struct i40e_hmc_sd_entry *sd_entry;
bool dma_mem_alloc_done = false;
struct i40e_dma_mem mem;
- i40e_status ret_code;
+ i40e_status ret_code = I40E_SUCCESS;
u64 alloc_len;
if (NULL == hmc_info->sd_table.sd_entry) {
@@ -567,11 +567,13 @@ static void tun_detach_all(struct net_device *dev)
for (i = 0; i < n; i++) {
tfile = rtnl_dereference(tun->tfiles[i]);
BUG_ON(!tfile);
+ tfile->socket.sk->sk_shutdown = RCV_SHUTDOWN;
tfile->socket.sk->sk_data_ready(tfile->socket.sk);
RCU_INIT_POINTER(tfile->tun, NULL);
--tun->numqueues;
}
list_for_each_entry(tfile, &tun->disabled, next) {
+ tfile->socket.sk->sk_shutdown = RCV_SHUTDOWN;
tfile->socket.sk->sk_data_ready(tfile->socket.sk);
RCU_INIT_POINTER(tfile->tun, NULL);
}
@@ -627,6 +629,7 @@ static int tun_attach(struct tun_struct *tun, struct file *file, bool skip_filte
goto out;
}
tfile->queue_index = tun->numqueues;
+ tfile->socket.sk->sk_shutdown &= ~RCV_SHUTDOWN;
rcu_assign_pointer(tfile->tun, tun);
rcu_assign_pointer(tun->tfiles[tun->numqueues], tfile);
tun->numqueues++;
@@ -1409,9 +1412,6 @@ static ssize_t tun_do_read(struct tun_struct *tun, struct tun_file *tfile,
if (!iov_iter_count(to))
return 0;
- if (tun->dev->reg_state != NETREG_REGISTERED)
- return -EIO;
-
/* Read frames from queue */
skb = __skb_recv_datagram(tfile->socket.sk, noblock ? MSG_DONTWAIT : 0,
&peeked, &off, &err);
@@ -1214,6 +1214,10 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode)
goto err_hif_stop;
}
+ ar->free_vdev_map = (1LL << ar->max_num_vdevs) - 1;
+
+ INIT_LIST_HEAD(&ar->arvifs);
+
/* we don't care about HTT in UTF mode */
if (mode == ATH10K_FIRMWARE_MODE_NORMAL) {
status = ath10k_htt_setup(&ar->htt);
@@ -1227,10 +1231,6 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode)
if (status)
goto err_hif_stop;
- ar->free_vdev_map = (1LL << ar->max_num_vdevs) - 1;
-
- INIT_LIST_HEAD(&ar->arvifs);
-
return 0;
err_hif_stop:
@@ -2004,7 +2004,12 @@ static ssize_t ath10k_write_pktlog_filter(struct file *file,
goto out;
}
- if (filter && (filter != ar->debug.pktlog_filter)) {
+ if (filter == ar->debug.pktlog_filter) {
+ ret = count;
+ goto out;
+ }
+
+ if (filter) {
ret = ath10k_wmi_pdev_pktlog_enable(ar, filter);
if (ret) {
ath10k_warn(ar, "failed to enable pktlog filter %x: %d\n",
@@ -4194,7 +4194,10 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
goto err_vdev_delete;
}
- if (ar->cfg_tx_chainmask) {
+ /* Configuring number of spatial stream for monitor interface is causing
+ * target assert in qca9888 and qca6174.
+ */
+ if (ar->cfg_tx_chainmask && (vif->type != NL80211_IFTYPE_MONITOR)) {
u16 nss = get_nss_from_chainmask(ar->cfg_tx_chainmask);
vdev_param = ar->wmi.vdev_param->nss;
@@ -6120,7 +6123,13 @@ ath10k_mac_update_rx_channel(struct ath10k *ar,
def = &vifs[0].new_ctx->def;
ar->rx_channel = def->chan;
- } else if (ctx && ath10k_mac_num_chanctxs(ar) == 0) {
+ } else if ((ctx && ath10k_mac_num_chanctxs(ar) == 0) ||
+ (ctx && (ar->state == ATH10K_STATE_RESTARTED))) {
+ /* During driver restart due to firmware assert, since mac80211
+ * already has valid channel context for given radio, channel
+ * context iteration return num_chanctx > 0. So fix rx_channel
+ * when restart is in progress.
+ */
ar->rx_channel = ctx->def.chan;
} else {
ar->rx_channel = NULL;
@@ -77,7 +77,7 @@ static const struct pci_device_id ath5k_led_devices[] = {
/* HP Compaq CQ60-206US (ddreggors@jumptv.com) */
{ ATH_SDEVICE(PCI_VENDOR_ID_HP, 0x0137a), ATH_LED(3, 1) },
/* HP Compaq C700 (nitrousnrg@gmail.com) */
- { ATH_SDEVICE(PCI_VENDOR_ID_HP, 0x0137b), ATH_LED(3, 1) },
+ { ATH_SDEVICE(PCI_VENDOR_ID_HP, 0x0137b), ATH_LED(3, 0) },
/* LiteOn AR5BXB63 (magooz@salug.it) */
{ ATH_SDEVICE(PCI_VENDOR_ID_ATHEROS, 0x3067), ATH_LED(3, 0) },
/* IBM-specific AR5212 (all others) */
@@ -49,6 +49,10 @@ int ath9k_led_blink;
module_param_named(blink, ath9k_led_blink, int, 0444);
MODULE_PARM_DESC(blink, "Enable LED blink on activity");
+static int ath9k_led_active_high = -1;
+module_param_named(led_active_high, ath9k_led_active_high, int, 0444);
+MODULE_PARM_DESC(led_active_high, "Invert LED polarity");
+
static int ath9k_btcoex_enable;
module_param_named(btcoex_enable, ath9k_btcoex_enable, int, 0444);
MODULE_PARM_DESC(btcoex_enable, "Enable wifi-BT coexistence");
@@ -600,6 +604,9 @@ static int ath9k_init_softc(u16 devid, struct ath_softc *sc,
if (ret)
return ret;
+ if (ath9k_led_active_high != -1)
+ ah->config.led_active_high = ath9k_led_active_high == 1;
+
/*
* Enable WLAN/BT RX Antenna diversity only when:
*
@@ -28,6 +28,16 @@ static const struct pci_device_id ath_pci_id_table[] = {
{ PCI_VDEVICE(ATHEROS, 0x0024) }, /* PCI-E */
{ PCI_VDEVICE(ATHEROS, 0x0027) }, /* PCI */
{ PCI_VDEVICE(ATHEROS, 0x0029) }, /* PCI */
+
+#ifdef CONFIG_ATH9K_PCOEM
+ /* Mini PCI AR9220 MB92 cards: Compex WLM200NX, Wistron DNMA-92 */
+ { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS,
+ 0x0029,
+ PCI_VENDOR_ID_ATHEROS,
+ 0x2096),
+ .driver_data = ATH9K_PCI_LED_ACT_HI },
+#endif
+
{ PCI_VDEVICE(ATHEROS, 0x002A) }, /* PCI-E */
#ifdef CONFIG_ATH9K_PCOEM
@@ -1660,9 +1660,9 @@ void rtl_watchdog_wq_callback(void *data)
if (((rtlpriv->link_info.num_rx_inperiod +
rtlpriv->link_info.num_tx_inperiod) > 8) ||
(rtlpriv->link_info.num_rx_inperiod > 2))
- rtl_lps_enter(hw);
- else
rtl_lps_leave(hw);
+ else
+ rtl_lps_enter(hw);
}
rtlpriv->link_info.num_rx_inperiod = 0;
@@ -1203,7 +1203,6 @@ static void btc8723b2ant_set_ant_path(struct btc_coexist *btcoexist,
/* Force GNT_BT to low */
btcoexist->btc_write_1byte_bitmask(btcoexist, 0x765, 0x18, 0x0);
- btcoexist->btc_write_2byte(btcoexist, 0x948, 0x0);
if (board_info->btdm_ant_pos == BTC_ANTENNA_AT_MAIN_PORT) {
/* tell firmware "no antenna inverse" */
@@ -1211,19 +1210,25 @@ static void btc8723b2ant_set_ant_path(struct btc_coexist *btcoexist,
h2c_parameter[1] = 1; /* ext switch type */
btcoexist->btc_fill_h2c(btcoexist, 0x65, 2,
h2c_parameter);
+ btcoexist->btc_write_2byte(btcoexist, 0x948, 0x0);
} else {
/* tell firmware "antenna inverse" */
h2c_parameter[0] = 1;
h2c_parameter[1] = 1; /* ext switch type */
btcoexist->btc_fill_h2c(btcoexist, 0x65, 2,
h2c_parameter);
+ btcoexist->btc_write_2byte(btcoexist, 0x948, 0x280);
}
}
/* ext switch setting */
if (use_ext_switch) {
/* fixed internal switch S1->WiFi, S0->BT */
- btcoexist->btc_write_2byte(btcoexist, 0x948, 0x0);
+ if (board_info->btdm_ant_pos == BTC_ANTENNA_AT_MAIN_PORT)
+ btcoexist->btc_write_2byte(btcoexist, 0x948, 0x0);
+ else
+ btcoexist->btc_write_2byte(btcoexist, 0x948, 0x280);
+
switch (antpos_type) {
case BTC_ANT_WIFI_AT_MAIN:
/* ext switch main at wifi */
@@ -965,13 +965,38 @@ void exhalbtc_set_chip_type(u8 chip_type)
}
}
-void exhalbtc_set_ant_num(u8 type, u8 ant_num)
+void exhalbtc_set_ant_num(struct rtl_priv *rtlpriv, u8 type, u8 ant_num)
{
if (BT_COEX_ANT_TYPE_PG == type) {
gl_bt_coexist.board_info.pg_ant_num = ant_num;
gl_bt_coexist.board_info.btdm_ant_num = ant_num;
+ /* The antenna position:
+ * Main (default) or Aux for pgAntNum=2 && btdmAntNum =1.
+ * The antenna position should be determined by
+ * auto-detect mechanism.
+ * The following is assumed to main,
+ * and those must be modified
+ * if y auto-detect mechanism is ready
+ */
+ if ((gl_bt_coexist.board_info.pg_ant_num == 2) &&
+ (gl_bt_coexist.board_info.btdm_ant_num == 1))
+ gl_bt_coexist.board_info.btdm_ant_pos =
+ BTC_ANTENNA_AT_MAIN_PORT;
+ else
+ gl_bt_coexist.board_info.btdm_ant_pos =
+ BTC_ANTENNA_AT_MAIN_PORT;
} else if (BT_COEX_ANT_TYPE_ANTDIV == type) {
gl_bt_coexist.board_info.btdm_ant_num = ant_num;
+ gl_bt_coexist.board_info.btdm_ant_pos =
+ BTC_ANTENNA_AT_MAIN_PORT;
+ } else if (type == BT_COEX_ANT_TYPE_DETECTED) {
+ gl_bt_coexist.board_info.btdm_ant_num = ant_num;
+ if (rtlpriv->cfg->mod_params->ant_sel == 1)
+ gl_bt_coexist.board_info.btdm_ant_pos =
+ BTC_ANTENNA_AT_AUX_PORT;
+ else
+ gl_bt_coexist.board_info.btdm_ant_pos =
+ BTC_ANTENNA_AT_MAIN_PORT;
}
}
@@ -535,7 +535,7 @@ void exhalbtc_set_bt_patch_version(u16 bt_hci_version, u16 bt_patch_version);
void exhalbtc_update_min_bt_rssi(char bt_rssi);
void exhalbtc_set_bt_exist(bool bt_exist);
void exhalbtc_set_chip_type(u8 chip_type);
-void exhalbtc_set_ant_num(u8 type, u8 ant_num);
+void exhalbtc_set_ant_num(struct rtl_priv *rtlpriv, u8 type, u8 ant_num);
void exhalbtc_display_bt_coex_info(struct btc_coexist *btcoexist);
void exhalbtc_signal_compensation(struct btc_coexist *btcoexist,
u8 *rssi_wifi, u8 *rssi_bt);
@@ -72,7 +72,10 @@ void rtl_btc_init_hal_vars(struct rtl_priv *rtlpriv)
__func__, bt_type);
exhalbtc_set_chip_type(bt_type);
- exhalbtc_set_ant_num(BT_COEX_ANT_TYPE_PG, ant_num);
+ if (rtlpriv->cfg->mod_params->ant_sel == 1)
+ exhalbtc_set_ant_num(rtlpriv, BT_COEX_ANT_TYPE_DETECTED, 1);
+ else
+ exhalbtc_set_ant_num(rtlpriv, BT_COEX_ANT_TYPE_PG, ant_num);
}
void rtl_btc_init_hw_config(struct rtl_priv *rtlpriv)
@@ -1573,7 +1573,7 @@ int rtl_pci_reset_trx_ring(struct ieee80211_hw *hw)
true,
HW_DESC_TXBUFF_ADDR),
skb->len, PCI_DMA_TODEVICE);
- kfree_skb(skb);
+ dev_kfree_skb_irq(skb);
ring->idx = (ring->idx + 1) % ring->entries;
}
ring->idx = 0;
@@ -2684,6 +2684,7 @@ void rtl8723be_read_bt_coexist_info_from_hwpg(struct ieee80211_hw *hw,
bool auto_load_fail, u8 *hwinfo)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_mod_params *mod_params = rtlpriv->cfg->mod_params;
u8 value;
u32 tmpu_32;
@@ -2702,6 +2703,10 @@ void rtl8723be_read_bt_coexist_info_from_hwpg(struct ieee80211_hw *hw,
rtlpriv->btcoexist.btc_info.ant_num = ANT_X2;
}
+ /* override ant_num / ant_path */
+ if (mod_params->ant_sel)
+ rtlpriv->btcoexist.btc_info.ant_num =
+ (mod_params->ant_sel == 1 ? ANT_X2 : ANT_X1);
}
void rtl8723be_bt_reg_init(struct ieee80211_hw *hw)
@@ -273,6 +273,7 @@ static struct rtl_mod_params rtl8723be_mod_params = {
.msi_support = false,
.disable_watchdog = false,
.debug = DBG_EMERG,
+ .ant_sel = 0,
};
static struct rtl_hal_cfg rtl8723be_hal_cfg = {
@@ -394,6 +395,7 @@ module_param_named(fwlps, rtl8723be_mod_params.fwctrl_lps, bool, 0444);
module_param_named(msi, rtl8723be_mod_params.msi_support, bool, 0444);
module_param_named(disable_watchdog, rtl8723be_mod_params.disable_watchdog,
bool, 0444);
+module_param_named(ant_sel, rtl8723be_mod_params.ant_sel, int, 0444);
MODULE_PARM_DESC(swenc, "Set to 1 for software crypto (default 0)\n");
MODULE_PARM_DESC(ips, "Set to 0 to not use link power save (default 1)\n");
MODULE_PARM_DESC(swlps, "Set to 1 to use SW control power save (default 0)\n");
@@ -402,6 +404,7 @@ MODULE_PARM_DESC(msi, "Set to 1 to use MSI interrupts mode (default 0)\n");
MODULE_PARM_DESC(debug, "Set debug level (0-5) (default 0)");
MODULE_PARM_DESC(disable_watchdog,
"Set to 1 to disable the watchdog (default 0)\n");
+MODULE_PARM_DESC(ant_sel, "Set to 1 or 2 to force antenna number (default 0)\n");
static SIMPLE_DEV_PM_OPS(rtlwifi_pm_ops, rtl_pci_suspend, rtl_pci_resume);
@@ -2237,6 +2237,9 @@ struct rtl_mod_params {
/* default 0: 1 means do not disable interrupts */
bool int_clear;
+
+ /* select antenna */
+ int ant_sel;
};
struct rtl_hal_usbint_cfg {
@@ -1013,6 +1013,9 @@ static int pci_mmap_resource(struct kobject *kobj, struct bin_attribute *attr,
if (i >= PCI_ROM_RESOURCE)
return -ENODEV;
+ if (res->flags & IORESOURCE_MEM && iomem_is_exclusive(res->start))
+ return -EINVAL;
+
if (!pci_mmap_fits(pdev, i, vma, PCI_MMAP_SYSFS)) {
WARN(1, "process \"%s\" tried to map 0x%08lx bytes at page 0x%08lx on %s BAR %d (start 0x%16Lx, size 0x%16Lx)\n",
current->comm, vma->vm_end-vma->vm_start, vma->vm_pgoff,
@@ -1029,10 +1032,6 @@ static int pci_mmap_resource(struct kobject *kobj, struct bin_attribute *attr,
pci_resource_to_user(pdev, i, res, &start, &end);
vma->vm_pgoff += start >> PAGE_SHIFT;
mmap_type = res->flags & IORESOURCE_MEM ? pci_mmap_mem : pci_mmap_io;
-
- if (res->flags & IORESOURCE_MEM && iomem_is_exclusive(start))
- return -EINVAL;
-
return pci_mmap_page_range(pdev, vma, mmap_type, write_combine);
}
@@ -176,9 +176,6 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
u16 orig_cmd;
struct pci_bus_region region, inverted_region;
- if (dev->non_compliant_bars)
- return 0;
-
mask = type ? PCI_ROM_ADDRESS_MASK : ~0;
/* No printks while decoding is disabled! */
@@ -319,6 +316,9 @@ static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom)
{
unsigned int pos, reg;
+ if (dev->non_compliant_bars)
+ return;
+
for (pos = 0; pos < howmany; pos++) {
struct resource *res = &dev->resource[pos];
reg = PCI_BASE_ADDRESS_0 + (pos << 2);
@@ -109,6 +109,7 @@ struct exynos5440_pmx_func {
* @nr_groups: number of pin groups available.
* @pmx_functions: list of pin functions parsed from device tree.
* @nr_functions: number of pin functions available.
+ * @range: gpio range to register with pinctrl
*/
struct exynos5440_pinctrl_priv_data {
void __iomem *reg_base;
@@ -119,6 +120,7 @@ struct exynos5440_pinctrl_priv_data {
unsigned int nr_groups;
const struct exynos5440_pmx_func *pmx_functions;
unsigned int nr_functions;
+ struct pinctrl_gpio_range range;
};
/**
@@ -769,7 +771,6 @@ static int exynos5440_pinctrl_register(struct platform_device *pdev,
struct pinctrl_desc *ctrldesc;
struct pinctrl_dev *pctl_dev;
struct pinctrl_pin_desc *pindesc, *pdesc;
- struct pinctrl_gpio_range grange;
char *pin_names;
int pin, ret;
@@ -827,12 +828,12 @@ static int exynos5440_pinctrl_register(struct platform_device *pdev,
return PTR_ERR(pctl_dev);
}
- grange.name = "exynos5440-pctrl-gpio-range";
- grange.id = 0;
- grange.base = 0;
- grange.npins = EXYNOS5440_MAX_PINS;
- grange.gc = priv->gc;
- pinctrl_add_gpio_range(pctl_dev, &grange);
+ priv->range.name = "exynos5440-pctrl-gpio-range";
+ priv->range.id = 0;
+ priv->range.base = 0;
+ priv->range.npins = EXYNOS5440_MAX_PINS;
+ priv->range.gc = priv->gc;
+ pinctrl_add_gpio_range(pctl_dev, &priv->range);
return 0;
}
@@ -28,6 +28,7 @@ struct rbtn_data {
enum rbtn_type type;
struct rfkill *rfkill;
struct input_dev *input_dev;
+ bool suspended;
};
@@ -220,9 +221,55 @@ static const struct acpi_device_id rbtn_ids[] = {
{ "", 0 },
};
+#ifdef CONFIG_PM_SLEEP
+static void ACPI_SYSTEM_XFACE rbtn_clear_suspended_flag(void *context)
+{
+ struct rbtn_data *rbtn_data = context;
+
+ rbtn_data->suspended = false;
+}
+
+static int rbtn_suspend(struct device *dev)
+{
+ struct acpi_device *device = to_acpi_device(dev);
+ struct rbtn_data *rbtn_data = acpi_driver_data(device);
+
+ rbtn_data->suspended = true;
+
+ return 0;
+}
+
+static int rbtn_resume(struct device *dev)
+{
+ struct acpi_device *device = to_acpi_device(dev);
+ struct rbtn_data *rbtn_data = acpi_driver_data(device);
+ acpi_status status;
+
+ /*
+ * Upon resume, some BIOSes send an ACPI notification thet triggers
+ * an unwanted input event. In order to ignore it, we use a flag
+ * that we set at suspend and clear once we have received the extra
+ * ACPI notification. Since ACPI notifications are delivered
+ * asynchronously to drivers, we clear the flag from the workqueue
+ * used to deliver the notifications. This should be enough
+ * to have the flag cleared only after we received the extra
+ * notification, if any.
+ */
+ status = acpi_os_execute(OSL_NOTIFY_HANDLER,
+ rbtn_clear_suspended_flag, rbtn_data);
+ if (ACPI_FAILURE(status))
+ rbtn_clear_suspended_flag(rbtn_data);
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(rbtn_pm_ops, rbtn_suspend, rbtn_resume);
+
static struct acpi_driver rbtn_driver = {
.name = "dell-rbtn",
.ids = rbtn_ids,
+ .drv.pm = &rbtn_pm_ops,
.ops = {
.add = rbtn_add,
.remove = rbtn_remove,
@@ -384,6 +431,15 @@ static void rbtn_notify(struct acpi_device *device, u32 event)
{
struct rbtn_data *rbtn_data = device->driver_data;
+ /*
+ * Some BIOSes send a notification at resume.
+ * Ignore it to prevent unwanted input events.
+ */
+ if (rbtn_data->suspended) {
+ dev_dbg(&device->dev, "ACPI notification ignored\n");
+ return;
+ }
+
if (event != 0x80) {
dev_info(&device->dev, "Received unknown event (0x%x)\n",
event);
@@ -261,7 +261,7 @@ static int micro_batt_probe(struct platform_device *pdev)
return 0;
ac_err:
- power_supply_unregister(micro_ac_power);
+ power_supply_unregister(micro_batt_power);
batt_err:
cancel_delayed_work_sync(&mb->update);
destroy_workqueue(mb->wq);
@@ -29,6 +29,7 @@ enum {
#define AAC_INT_MODE_MSI (1<<1)
#define AAC_INT_MODE_AIF (1<<2)
#define AAC_INT_MODE_SYNC (1<<3)
+#define AAC_INT_MODE_MSIX (1<<16)
#define AAC_INT_ENABLE_TYPE1_INTX 0xfffffffb
#define AAC_INT_ENABLE_TYPE1_MSIX 0xfffffffa
@@ -37,6 +37,7 @@
#include <linux/spinlock.h>
#include <linux/slab.h>
#include <linux/blkdev.h>
+#include <linux/delay.h>
#include <linux/completion.h>
#include <linux/mm.h>
#include <scsi/scsi_host.h>
@@ -49,6 +50,20 @@ struct aac_common aac_config = {
.irq_mod = 1
};
+static inline int aac_is_msix_mode(struct aac_dev *dev)
+{
+ u32 status;
+
+ status = src_readl(dev, MUnit.OMR);
+ return (status & AAC_INT_MODE_MSIX);
+}
+
+static inline void aac_change_to_intx(struct aac_dev *dev)
+{
+ aac_src_access_devreg(dev, AAC_DISABLE_MSIX);
+ aac_src_access_devreg(dev, AAC_ENABLE_INTX);
+}
+
static int aac_alloc_comm(struct aac_dev *dev, void **commaddr, unsigned long commsize, unsigned long commalign)
{
unsigned char *base;
@@ -358,6 +373,15 @@ struct aac_dev *aac_init_adapter(struct aac_dev *dev)
dev->comm_interface = AAC_COMM_PRODUCER;
dev->raw_io_interface = dev->raw_io_64 = 0;
+
+ /*
+ * Enable INTX mode, if not done already Enabled
+ */
+ if (aac_is_msix_mode(dev)) {
+ aac_change_to_intx(dev);
+ dev_info(&dev->pdev->dev, "Changed firmware to INTX mode");
+ }
+
if ((!aac_adapter_sync_cmd(dev, GET_ADAPTER_PROPERTIES,
0, 0, 0, 0, 0, 0,
status+0, status+1, status+2, status+3, NULL)) &&
@@ -611,10 +611,10 @@ int aac_fib_send(u16 command, struct fib *fibptr, unsigned long size,
}
return -EFAULT;
}
- /* We used to udelay() here but that absorbed
- * a CPU when a timeout occured. Not very
- * useful. */
- cpu_relax();
+ /*
+ * Allow other processes / CPUS to use core
+ */
+ schedule();
}
} else if (down_interruptible(&fibptr->event_wait)) {
/* Do nothing ... satisfy
@@ -1999,6 +1999,10 @@ int aac_command_thread(void *data)
if (difference <= 0)
difference = 1;
set_current_state(TASK_INTERRUPTIBLE);
+
+ if (kthread_should_stop())
+ break;
+
schedule_timeout(difference);
if (kthread_should_stop())
@@ -314,6 +314,7 @@ static void scsi_target_destroy(struct scsi_target *starget)
struct Scsi_Host *shost = dev_to_shost(dev->parent);
unsigned long flags;
+ BUG_ON(starget->state == STARGET_DEL);
starget->state = STARGET_DEL;
transport_destroy_device(dev);
spin_lock_irqsave(shost->host_lock, flags);
@@ -1148,18 +1148,18 @@ static void __scsi_remove_target(struct scsi_target *starget)
void scsi_remove_target(struct device *dev)
{
struct Scsi_Host *shost = dev_to_shost(dev->parent);
- struct scsi_target *starget, *last_target = NULL;
+ struct scsi_target *starget;
unsigned long flags;
restart:
spin_lock_irqsave(shost->host_lock, flags);
list_for_each_entry(starget, &shost->__targets, siblings) {
if (starget->state == STARGET_DEL ||
- starget == last_target)
+ starget->state == STARGET_REMOVE)
continue;
if (starget->dev.parent == dev || &starget->dev == dev) {
kref_get(&starget->reap_ref);
- last_target = starget;
+ starget->state = STARGET_REMOVE;
spin_unlock_irqrestore(shost->host_lock, flags);
__scsi_remove_target(starget);
scsi_target_reap(starget);
@@ -567,14 +567,17 @@ static int das1800_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
struct comedi_isadma_desc *desc;
int i;
- outb(0x0, dev->iobase + DAS1800_STATUS); /* disable conversions */
- outb(0x0, dev->iobase + DAS1800_CONTROL_B); /* disable interrupts and dma */
- outb(0x0, dev->iobase + DAS1800_CONTROL_A); /* disable and clear fifo and stop triggering */
-
- for (i = 0; i < 2; i++) {
- desc = &dma->desc[i];
- if (desc->chan)
- comedi_isadma_disable(desc->chan);
+ /* disable and stop conversions */
+ outb(0x0, dev->iobase + DAS1800_STATUS);
+ outb(0x0, dev->iobase + DAS1800_CONTROL_B);
+ outb(0x0, dev->iobase + DAS1800_CONTROL_A);
+
+ if (dma) {
+ for (i = 0; i < 2; i++) {
+ desc = &dma->desc[i];
+ if (desc->chan)
+ comedi_isadma_disable(desc->chan);
+ }
}
return 0;
@@ -934,13 +937,14 @@ static void das1800_ai_setup_dma(struct comedi_device *dev,
{
struct das1800_private *devpriv = dev->private;
struct comedi_isadma *dma = devpriv->dma;
- struct comedi_isadma_desc *desc = &dma->desc[0];
+ struct comedi_isadma_desc *desc;
unsigned int bytes;
if ((devpriv->irq_dma_bits & DMA_ENABLED) == 0)
return;
dma->cur_dma = 0;
+ desc = &dma->desc[0];
/* determine a dma transfer size to fill buffer in 0.3 sec */
bytes = das1800_ai_transfer_size(dev, s, desc->maxsize, 300000000);
@@ -444,6 +444,7 @@ int tb_drom_read(struct tb_switch *sw)
return tb_drom_parse_entries(sw);
err:
kfree(sw->drom);
+ sw->drom = NULL;
return -EIO;
}
@@ -2045,7 +2045,9 @@ static void gsm_cleanup_mux(struct gsm_mux *gsm)
}
}
spin_unlock(&gsm_mux_lock);
- WARN_ON(i == MAX_MUX);
+ /* open failed before registering => nothing to do */
+ if (i == MAX_MUX)
+ return;
/* In theory disconnecting DLCI 0 is sufficient but for some
modems this is apparently not the case. */
@@ -600,7 +600,7 @@ static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file,
add_wait_queue(&tty->read_wait, &wait);
for (;;) {
- if (test_bit(TTY_OTHER_DONE, &tty->flags)) {
+ if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) {
ret = -EIO;
break;
}
@@ -828,7 +828,7 @@ static unsigned int n_hdlc_tty_poll(struct tty_struct *tty, struct file *filp,
/* set bits for operations that won't block */
if (n_hdlc->rx_buf_list.head)
mask |= POLLIN | POLLRDNORM; /* readable */
- if (test_bit(TTY_OTHER_DONE, &tty->flags))
+ if (test_bit(TTY_OTHER_CLOSED, &tty->flags))
mask |= POLLHUP;
if (tty_hung_up_p(filp))
mask |= POLLHUP;
@@ -201,7 +201,7 @@ static void n_tty_kick_worker(struct tty_struct *tty)
*/
WARN_RATELIMIT(test_bit(TTY_LDISC_HALTED, &tty->flags),
"scheduling buffer work for halted ldisc\n");
- queue_work(system_unbound_wq, &tty->port->buf.work);
+ tty_buffer_restart_work(tty->port);
}
}
@@ -1959,18 +1959,6 @@ static inline int input_available_p(struct tty_struct *tty, int poll)
return ldata->commit_head - ldata->read_tail >= amt;
}
-static inline int check_other_done(struct tty_struct *tty)
-{
- int done = test_bit(TTY_OTHER_DONE, &tty->flags);
- if (done) {
- /* paired with cmpxchg() in check_other_closed(); ensures
- * read buffer head index is not stale
- */
- smp_mb__after_atomic();
- }
- return done;
-}
-
/**
* copy_from_read_buf - copy read data directly
* @tty: terminal device
@@ -2188,7 +2176,7 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file,
struct n_tty_data *ldata = tty->disc_data;
unsigned char __user *b = buf;
DEFINE_WAIT_FUNC(wait, woken_wake_function);
- int c, done;
+ int c;
int minimum, time;
ssize_t retval = 0;
long timeout;
@@ -2256,32 +2244,35 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file,
((minimum - (b - buf)) >= 1))
ldata->minimum_to_wake = (minimum - (b - buf));
- done = check_other_done(tty);
-
if (!input_available_p(tty, 0)) {
- if (done) {
- retval = -EIO;
- break;
- }
- if (tty_hung_up_p(file))
- break;
- if (!timeout)
- break;
- if (file->f_flags & O_NONBLOCK) {
- retval = -EAGAIN;
- break;
- }
- if (signal_pending(current)) {
- retval = -ERESTARTSYS;
- break;
- }
up_read(&tty->termios_rwsem);
+ tty_buffer_flush_work(tty->port);
+ down_read(&tty->termios_rwsem);
+ if (!input_available_p(tty, 0)) {
+ if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) {
+ retval = -EIO;
+ break;
+ }
+ if (tty_hung_up_p(file))
+ break;
+ if (!timeout)
+ break;
+ if (file->f_flags & O_NONBLOCK) {
+ retval = -EAGAIN;
+ break;
+ }
+ if (signal_pending(current)) {
+ retval = -ERESTARTSYS;
+ break;
+ }
+ up_read(&tty->termios_rwsem);
- timeout = wait_woken(&wait, TASK_INTERRUPTIBLE,
- timeout);
+ timeout = wait_woken(&wait, TASK_INTERRUPTIBLE,
+ timeout);
- down_read(&tty->termios_rwsem);
- continue;
+ down_read(&tty->termios_rwsem);
+ continue;
+ }
}
if (ldata->icanon && !L_EXTPROC(tty)) {
@@ -2463,12 +2454,17 @@ static unsigned int n_tty_poll(struct tty_struct *tty, struct file *file,
poll_wait(file, &tty->read_wait, wait);
poll_wait(file, &tty->write_wait, wait);
- if (check_other_done(tty))
- mask |= POLLHUP;
if (input_available_p(tty, 1))
mask |= POLLIN | POLLRDNORM;
+ else {
+ tty_buffer_flush_work(tty->port);
+ if (input_available_p(tty, 1))
+ mask |= POLLIN | POLLRDNORM;
+ }
if (tty->packet && tty->link->ctrl_status)
mask |= POLLPRI | POLLIN | POLLRDNORM;
+ if (test_bit(TTY_OTHER_CLOSED, &tty->flags))
+ mask |= POLLHUP;
if (tty_hung_up_p(file))
mask |= POLLHUP;
if (!(mask & (POLLHUP | POLLIN | POLLRDNORM))) {
@@ -54,7 +54,7 @@ static void pty_close(struct tty_struct *tty, struct file *filp)
if (!tty->link)
return;
set_bit(TTY_OTHER_CLOSED, &tty->link->flags);
- tty_flip_buffer_push(tty->link->port);
+ wake_up_interruptible(&tty->link->read_wait);
wake_up_interruptible(&tty->link->write_wait);
if (tty->driver->subtype == PTY_TYPE_MASTER) {
set_bit(TTY_OTHER_CLOSED, &tty->flags);
@@ -242,9 +242,7 @@ static int pty_open(struct tty_struct *tty, struct file *filp)
goto out;
clear_bit(TTY_IO_ERROR, &tty->flags);
- /* TTY_OTHER_CLOSED must be cleared before TTY_OTHER_DONE */
clear_bit(TTY_OTHER_CLOSED, &tty->link->flags);
- clear_bit(TTY_OTHER_DONE, &tty->link->flags);
set_bit(TTY_THROTTLED, &tty->flags);
return 0;
@@ -1402,6 +1402,9 @@ byt_set_termios(struct uart_port *p, struct ktermios *termios,
unsigned long m, n;
u32 reg;
+ /* Gracefully handle the B0 case: fall back to B9600 */
+ fuart = fuart ? fuart : 9600 * 16;
+
/* Get Fuart closer to Fref */
fuart *= rounddown_pow_of_two(fref / fuart);
@@ -1478,6 +1478,9 @@ static const struct of_device_id ucc_uart_match[] = {
.type = "serial",
.compatible = "ucc_uart",
},
+ {
+ .compatible = "fsl,t1040-ucc-uart",
+ },
{},
};
MODULE_DEVICE_TABLE(of, ucc_uart_match);
@@ -37,29 +37,6 @@
#define TTY_BUFFER_PAGE (((PAGE_SIZE - sizeof(struct tty_buffer)) / 2) & ~0xFF)
-/*
- * If all tty flip buffers have been processed by flush_to_ldisc() or
- * dropped by tty_buffer_flush(), check if the linked pty has been closed.
- * If so, wake the reader/poll to process
- */
-static inline void check_other_closed(struct tty_struct *tty)
-{
- unsigned long flags, old;
-
- /* transition from TTY_OTHER_CLOSED => TTY_OTHER_DONE must be atomic */
- for (flags = ACCESS_ONCE(tty->flags);
- test_bit(TTY_OTHER_CLOSED, &flags);
- ) {
- old = flags;
- __set_bit(TTY_OTHER_DONE, &flags);
- flags = cmpxchg(&tty->flags, old, flags);
- if (old == flags) {
- wake_up_interruptible(&tty->read_wait);
- break;
- }
- }
-}
-
/**
* tty_buffer_lock_exclusive - gain exclusive access to buffer
* tty_buffer_unlock_exclusive - release exclusive access
@@ -251,8 +228,6 @@ void tty_buffer_flush(struct tty_struct *tty, struct tty_ldisc *ld)
if (ld && ld->ops->flush_buffer)
ld->ops->flush_buffer(tty);
- check_other_closed(tty);
-
atomic_dec(&buf->priority);
mutex_unlock(&buf->lock);
}
@@ -496,10 +471,8 @@ static void flush_to_ldisc(struct work_struct *work)
smp_rmb();
count = head->commit - head->read;
if (!count) {
- if (next == NULL) {
- check_other_closed(tty);
+ if (next == NULL)
break;
- }
buf->head = next;
tty_buffer_free(port, head);
continue;
@@ -577,3 +550,18 @@ void tty_buffer_set_lock_subclass(struct tty_port *port)
{
lockdep_set_subclass(&port->buf.lock, TTY_LOCK_SLAVE);
}
+
+bool tty_buffer_restart_work(struct tty_port *port)
+{
+ return queue_work(system_unbound_wq, &port->buf.work);
+}
+
+bool tty_buffer_cancel_work(struct tty_port *port)
+{
+ return cancel_work_sync(&port->buf.work);
+}
+
+void tty_buffer_flush_work(struct tty_port *port)
+{
+ flush_work(&port->buf.work);
+}
@@ -1690,7 +1690,7 @@ static void release_tty(struct tty_struct *tty, int idx)
tty->port->itty = NULL;
if (tty->link)
tty->link->port->itty = NULL;
- cancel_work_sync(&tty->port->buf.work);
+ tty_buffer_cancel_work(tty->port);
tty_kref_put(tty->link);
tty_kref_put(tty);
@@ -131,7 +131,7 @@ EXPORT_SYMBOL(tty_port_free_xmit_buf);
*/
void tty_port_destroy(struct tty_port *port)
{
- cancel_work_sync(&port->buf.work);
+ tty_buffer_cancel_work(port);
tty_buffer_free_all(port);
}
EXPORT_SYMBOL(tty_port_destroy);
@@ -3583,9 +3583,10 @@ static int do_register_con_driver(const struct consw *csw, int first, int last)
goto err;
desc = csw->con_startup();
-
- if (!desc)
+ if (!desc) {
+ retval = -ENODEV;
goto err;
+ }
retval = -EINVAL;
@@ -283,7 +283,7 @@ static int usb_probe_interface(struct device *dev)
struct usb_device *udev = interface_to_usbdev(intf);
const struct usb_device_id *id;
int error = -ENODEV;
- int lpm_disable_error;
+ int lpm_disable_error = -ENODEV;
dev_dbg(dev, "%s\n", __func__);
@@ -331,12 +331,14 @@ static int usb_probe_interface(struct device *dev)
* setting during probe, that should also be fine. usb_set_interface()
* will attempt to disable LPM, and fail if it can't disable it.
*/
- lpm_disable_error = usb_unlocked_disable_lpm(udev);
- if (lpm_disable_error && driver->disable_hub_initiated_lpm) {
- dev_err(&intf->dev, "%s Failed to disable LPM for driver %s\n.",
- __func__, driver->name);
- error = lpm_disable_error;
- goto err;
+ if (driver->disable_hub_initiated_lpm) {
+ lpm_disable_error = usb_unlocked_disable_lpm(udev);
+ if (lpm_disable_error) {
+ dev_err(&intf->dev, "%s Failed to disable LPM for driver %s\n.",
+ __func__, driver->name);
+ error = lpm_disable_error;
+ goto err;
+ }
}
/* Carry out a deferred switch to altsetting 0 */
@@ -386,7 +388,8 @@ static int usb_unbind_interface(struct device *dev)
struct usb_interface *intf = to_usb_interface(dev);
struct usb_host_endpoint *ep, **eps = NULL;
struct usb_device *udev;
- int i, j, error, r, lpm_disable_error;
+ int i, j, error, r;
+ int lpm_disable_error = -ENODEV;
intf->condition = USB_INTERFACE_UNBINDING;
@@ -394,12 +397,13 @@ static int usb_unbind_interface(struct device *dev)
udev = interface_to_usbdev(intf);
error = usb_autoresume_device(udev);
- /* Hub-initiated LPM policy may change, so attempt to disable LPM until
+ /* If hub-initiated LPM policy may change, attempt to disable LPM until
* the driver is unbound. If LPM isn't disabled, that's fine because it
* wouldn't be enabled unless all the bound interfaces supported
* hub-initiated LPM.
*/
- lpm_disable_error = usb_unlocked_disable_lpm(udev);
+ if (driver->disable_hub_initiated_lpm)
+ lpm_disable_error = usb_unlocked_disable_lpm(udev);
/*
* Terminate all URBs for this interface unless the driver
@@ -502,7 +506,7 @@ int usb_driver_claim_interface(struct usb_driver *driver,
struct device *dev;
struct usb_device *udev;
int retval = 0;
- int lpm_disable_error;
+ int lpm_disable_error = -ENODEV;
if (!iface)
return -ENODEV;
@@ -519,12 +523,14 @@ int usb_driver_claim_interface(struct usb_driver *driver,
iface->condition = USB_INTERFACE_BOUND;
- /* Disable LPM until this driver is bound. */
- lpm_disable_error = usb_unlocked_disable_lpm(udev);
- if (lpm_disable_error && driver->disable_hub_initiated_lpm) {
- dev_err(&iface->dev, "%s Failed to disable LPM for driver %s\n.",
- __func__, driver->name);
- return -ENOMEM;
+ /* See the comment about disabling LPM in usb_probe_interface(). */
+ if (driver->disable_hub_initiated_lpm) {
+ lpm_disable_error = usb_unlocked_disable_lpm(udev);
+ if (lpm_disable_error) {
+ dev_err(&iface->dev, "%s Failed to disable LPM for driver %s\n.",
+ __func__, driver->name);
+ return -ENOMEM;
+ }
}
/* Claimed interfaces are initially inactive (suspended) and
@@ -915,7 +915,7 @@ static void usb_bus_init (struct usb_bus *bus)
bus->bandwidth_allocated = 0;
bus->bandwidth_int_reqs = 0;
bus->bandwidth_isoc_reqs = 0;
- mutex_init(&bus->usb_address0_mutex);
+ mutex_init(&bus->devnum_next_mutex);
INIT_LIST_HEAD (&bus->bus_list);
}
@@ -2446,6 +2446,14 @@ struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver,
return NULL;
}
if (primary_hcd == NULL) {
+ hcd->address0_mutex = kmalloc(sizeof(*hcd->address0_mutex),
+ GFP_KERNEL);
+ if (!hcd->address0_mutex) {
+ kfree(hcd);
+ dev_dbg(dev, "hcd address0 mutex alloc failed\n");
+ return NULL;
+ }
+ mutex_init(hcd->address0_mutex);
hcd->bandwidth_mutex = kmalloc(sizeof(*hcd->bandwidth_mutex),
GFP_KERNEL);
if (!hcd->bandwidth_mutex) {
@@ -2457,6 +2465,7 @@ struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver,
dev_set_drvdata(dev, hcd);
} else {
mutex_lock(&usb_port_peer_mutex);
+ hcd->address0_mutex = primary_hcd->address0_mutex;
hcd->bandwidth_mutex = primary_hcd->bandwidth_mutex;
hcd->primary_hcd = primary_hcd;
primary_hcd->primary_hcd = primary_hcd;
@@ -2523,8 +2532,10 @@ static void hcd_release(struct kref *kref)
struct usb_hcd *hcd = container_of (kref, struct usb_hcd, kref);
mutex_lock(&usb_port_peer_mutex);
- if (usb_hcd_is_primary_hcd(hcd))
+ if (usb_hcd_is_primary_hcd(hcd)) {
+ kfree(hcd->address0_mutex);
kfree(hcd->bandwidth_mutex);
+ }
if (hcd->shared_hcd) {
struct usb_hcd *peer = hcd->shared_hcd;
@@ -2067,7 +2067,7 @@ static void choose_devnum(struct usb_device *udev)
struct usb_bus *bus = udev->bus;
/* be safe when more hub events are proceed in parallel */
- mutex_lock(&bus->usb_address0_mutex);
+ mutex_lock(&bus->devnum_next_mutex);
if (udev->wusb) {
devnum = udev->portnum + 1;
BUG_ON(test_bit(devnum, bus->devmap.devicemap));
@@ -2085,7 +2085,7 @@ static void choose_devnum(struct usb_device *udev)
set_bit(devnum, bus->devmap.devicemap);
udev->devnum = devnum;
}
- mutex_unlock(&bus->usb_address0_mutex);
+ mutex_unlock(&bus->devnum_next_mutex);
}
static void release_devnum(struct usb_device *udev)
@@ -4263,7 +4263,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
if (oldspeed == USB_SPEED_LOW)
delay = HUB_LONG_RESET_TIME;
- mutex_lock(&hdev->bus->usb_address0_mutex);
+ mutex_lock(hcd->address0_mutex);
/* Reset the device; full speed may morph to high speed */
/* FIXME a USB 2.0 device may morph into SuperSpeed on reset. */
@@ -4545,7 +4545,7 @@ fail:
hub_port_disable(hub, port1, 0);
update_devnum(udev, devnum); /* for disconnect processing */
}
- mutex_unlock(&hdev->bus->usb_address0_mutex);
+ mutex_unlock(hcd->address0_mutex);
return retval;
}
@@ -651,7 +651,7 @@ static void ffs_user_copy_worker(struct work_struct *work)
if (io_data->read && ret > 0) {
use_mm(io_data->mm);
ret = copy_to_iter(io_data->buf, ret, &io_data->data);
- if (iov_iter_count(&io_data->data))
+ if (ret != io_data->req->actual && iov_iter_count(&io_data->data))
ret = -EFAULT;
unuse_mm(io_data->mm);
}
@@ -2998,25 +2998,6 @@ void fsg_common_set_inquiry_string(struct fsg_common *common, const char *vn,
}
EXPORT_SYMBOL_GPL(fsg_common_set_inquiry_string);
-int fsg_common_run_thread(struct fsg_common *common)
-{
- common->state = FSG_STATE_IDLE;
- /* Tell the thread to start working */
- common->thread_task =
- kthread_create(fsg_main_thread, common, "file-storage");
- if (IS_ERR(common->thread_task)) {
- common->state = FSG_STATE_TERMINATED;
- return PTR_ERR(common->thread_task);
- }
-
- DBG(common, "I/O thread pid: %d\n", task_pid_nr(common->thread_task));
-
- wake_up_process(common->thread_task);
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(fsg_common_run_thread);
-
static void fsg_common_release(struct kref *ref)
{
struct fsg_common *common = container_of(ref, struct fsg_common, ref);
@@ -3025,6 +3006,7 @@ static void fsg_common_release(struct kref *ref)
if (common->state != FSG_STATE_TERMINATED) {
raise_exception(common, FSG_STATE_EXIT);
wait_for_completion(&common->thread_notifier);
+ common->thread_task = NULL;
}
if (likely(common->luns)) {
@@ -3056,6 +3038,7 @@ static void fsg_common_release(struct kref *ref)
static int fsg_bind(struct usb_configuration *c, struct usb_function *f)
{
struct fsg_dev *fsg = fsg_from_func(f);
+ struct fsg_common *common = fsg->common;
struct usb_gadget *gadget = c->cdev->gadget;
int i;
struct usb_ep *ep;
@@ -3070,9 +3053,21 @@ static int fsg_bind(struct usb_configuration *c, struct usb_function *f)
if (ret)
return ret;
fsg_common_set_inquiry_string(fsg->common, NULL, NULL);
- ret = fsg_common_run_thread(fsg->common);
- if (ret)
+ }
+
+ if (!common->thread_task) {
+ common->state = FSG_STATE_IDLE;
+ common->thread_task =
+ kthread_create(fsg_main_thread, common, "file-storage");
+ if (IS_ERR(common->thread_task)) {
+ int ret = PTR_ERR(common->thread_task);
+ common->thread_task = NULL;
+ common->state = FSG_STATE_TERMINATED;
return ret;
+ }
+ DBG(common, "I/O thread pid: %d\n",
+ task_pid_nr(common->thread_task));
+ wake_up_process(common->thread_task);
}
fsg->gadget = gadget;
@@ -157,8 +157,6 @@ int fsg_common_create_luns(struct fsg_common *common, struct fsg_config *cfg);
void fsg_common_set_inquiry_string(struct fsg_common *common, const char *vn,
const char *pn);
-int fsg_common_run_thread(struct fsg_common *common);
-
void fsg_config_from_params(struct fsg_config *cfg,
const struct fsg_module_parameters *params,
unsigned int fsg_num_buffers);
@@ -147,10 +147,6 @@ static int acm_ms_do_config(struct usb_configuration *c)
if (status < 0)
goto put_msg;
- status = fsg_common_run_thread(opts->common);
- if (status)
- goto remove_acm;
-
status = usb_add_function(c, f_msg);
if (status)
goto remove_acm;
@@ -146,10 +146,6 @@ static int msg_do_config(struct usb_configuration *c)
if (IS_ERR(f_msg))
return PTR_ERR(f_msg);
- ret = fsg_common_run_thread(opts->common);
- if (ret)
- goto put_func;
-
ret = usb_add_function(c, f_msg);
if (ret)
goto put_func;
@@ -151,7 +151,6 @@ static struct usb_function *f_msg_rndis;
static int rndis_do_config(struct usb_configuration *c)
{
- struct fsg_opts *fsg_opts;
int ret;
if (gadget_is_otg(c->cdev->gadget)) {
@@ -183,11 +182,6 @@ static int rndis_do_config(struct usb_configuration *c)
goto err_fsg;
}
- fsg_opts = fsg_opts_from_func_inst(fi_msg);
- ret = fsg_common_run_thread(fsg_opts->common);
- if (ret)
- goto err_run;
-
ret = usb_add_function(c, f_msg_rndis);
if (ret)
goto err_run;
@@ -239,7 +233,6 @@ static struct usb_function *f_msg_multi;
static int cdc_do_config(struct usb_configuration *c)
{
- struct fsg_opts *fsg_opts;
int ret;
if (gadget_is_otg(c->cdev->gadget)) {
@@ -272,11 +265,6 @@ static int cdc_do_config(struct usb_configuration *c)
goto err_fsg;
}
- fsg_opts = fsg_opts_from_func_inst(fi_msg);
- ret = fsg_common_run_thread(fsg_opts->common);
- if (ret)
- goto err_run;
-
ret = usb_add_function(c, f_msg_multi);
if (ret)
goto err_run;
@@ -33,6 +33,7 @@ config USB_XHCI_PCI
config USB_XHCI_PLATFORM
tristate
+ select USB_XHCI_RCAR if ARCH_SHMOBILE
config USB_XHCI_MVEBU
tristate "xHCI support for Marvell Armada 375/38x"
@@ -44,7 +45,7 @@ config USB_XHCI_MVEBU
config USB_XHCI_RCAR
tristate "xHCI support for Renesas R-Car SoCs"
- select USB_XHCI_PLATFORM
+ depends on USB_XHCI_PLATFORM
depends on ARCH_SHMOBILE || COMPILE_TEST
---help---
Say 'Y' to enable the support for the xHCI host controller
@@ -303,11 +303,20 @@ static unsigned mod_pattern;
module_param_named(pattern, mod_pattern, uint, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(mod_pattern, "i/o pattern (0 == zeroes)");
-static inline void simple_fill_buf(struct urb *urb)
+static unsigned get_maxpacket(struct usb_device *udev, int pipe)
+{
+ struct usb_host_endpoint *ep;
+
+ ep = usb_pipe_endpoint(udev, pipe);
+ return le16_to_cpup(&ep->desc.wMaxPacketSize);
+}
+
+static void simple_fill_buf(struct urb *urb)
{
unsigned i;
u8 *buf = urb->transfer_buffer;
unsigned len = urb->transfer_buffer_length;
+ unsigned maxpacket;
switch (pattern) {
default:
@@ -316,8 +325,9 @@ static inline void simple_fill_buf(struct urb *urb)
memset(buf, 0, len);
break;
case 1: /* mod63 */
+ maxpacket = get_maxpacket(urb->dev, urb->pipe);
for (i = 0; i < len; i++)
- *buf++ = (u8) (i % 63);
+ *buf++ = (u8) ((i % maxpacket) % 63);
break;
}
}
@@ -349,6 +359,7 @@ static int simple_check_buf(struct usbtest_dev *tdev, struct urb *urb)
u8 expected;
u8 *buf = urb->transfer_buffer;
unsigned len = urb->actual_length;
+ unsigned maxpacket = get_maxpacket(urb->dev, urb->pipe);
int ret = check_guard_bytes(tdev, urb);
if (ret)
@@ -366,7 +377,7 @@ static int simple_check_buf(struct usbtest_dev *tdev, struct urb *urb)
* with set_interface or set_config.
*/
case 1: /* mod63 */
- expected = i % 63;
+ expected = (i % maxpacket) % 63;
break;
/* always fail unsupported patterns */
default:
@@ -478,11 +489,14 @@ static void free_sglist(struct scatterlist *sg, int nents)
}
static struct scatterlist *
-alloc_sglist(int nents, int max, int vary)
+alloc_sglist(int nents, int max, int vary, struct usbtest_dev *dev, int pipe)
{
struct scatterlist *sg;
+ unsigned int n_size = 0;
unsigned i;
unsigned size = max;
+ unsigned maxpacket =
+ get_maxpacket(interface_to_usbdev(dev->intf), pipe);
if (max == 0)
return NULL;
@@ -511,7 +525,8 @@ alloc_sglist(int nents, int max, int vary)
break;
case 1:
for (j = 0; j < size; j++)
- *buf++ = (u8) (j % 63);
+ *buf++ = (u8) (((j + n_size) % maxpacket) % 63);
+ n_size += size;
break;
}
@@ -2175,7 +2190,8 @@ usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf)
"TEST 5: write %d sglists %d entries of %d bytes\n",
param->iterations,
param->sglen, param->length);
- sg = alloc_sglist(param->sglen, param->length, 0);
+ sg = alloc_sglist(param->sglen, param->length,
+ 0, dev, dev->out_pipe);
if (!sg) {
retval = -ENOMEM;
break;
@@ -2193,7 +2209,8 @@ usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf)
"TEST 6: read %d sglists %d entries of %d bytes\n",
param->iterations,
param->sglen, param->length);
- sg = alloc_sglist(param->sglen, param->length, 0);
+ sg = alloc_sglist(param->sglen, param->length,
+ 0, dev, dev->in_pipe);
if (!sg) {
retval = -ENOMEM;
break;
@@ -2210,7 +2227,8 @@ usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf)
"TEST 7: write/%d %d sglists %d entries 0..%d bytes\n",
param->vary, param->iterations,
param->sglen, param->length);
- sg = alloc_sglist(param->sglen, param->length, param->vary);
+ sg = alloc_sglist(param->sglen, param->length,
+ param->vary, dev, dev->out_pipe);
if (!sg) {
retval = -ENOMEM;
break;
@@ -2227,7 +2245,8 @@ usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf)
"TEST 8: read/%d %d sglists %d entries 0..%d bytes\n",
param->vary, param->iterations,
param->sglen, param->length);
- sg = alloc_sglist(param->sglen, param->length, param->vary);
+ sg = alloc_sglist(param->sglen, param->length,
+ param->vary, dev, dev->in_pipe);
if (!sg) {
retval = -ENOMEM;
break;
@@ -784,7 +784,7 @@ static void cp210x_set_termios(struct tty_struct *tty,
} else {
modem_ctl[0] &= ~0x7B;
modem_ctl[0] |= 0x01;
- modem_ctl[1] |= 0x40;
+ modem_ctl[1] = 0x40;
dev_dbg(dev, "%s - flow control = NONE\n", __func__);
}
@@ -2856,14 +2856,16 @@ static int edge_startup(struct usb_serial *serial)
/* not set up yet, so do it now */
edge_serial->interrupt_read_urb =
usb_alloc_urb(0, GFP_KERNEL);
- if (!edge_serial->interrupt_read_urb)
- return -ENOMEM;
+ if (!edge_serial->interrupt_read_urb) {
+ response = -ENOMEM;
+ break;
+ }
edge_serial->interrupt_in_buffer =
kmalloc(buffer_size, GFP_KERNEL);
if (!edge_serial->interrupt_in_buffer) {
- usb_free_urb(edge_serial->interrupt_read_urb);
- return -ENOMEM;
+ response = -ENOMEM;
+ break;
}
edge_serial->interrupt_in_endpoint =
endpoint->bEndpointAddress;
@@ -2891,14 +2893,16 @@ static int edge_startup(struct usb_serial *serial)
/* not set up yet, so do it now */
edge_serial->read_urb =
usb_alloc_urb(0, GFP_KERNEL);
- if (!edge_serial->read_urb)
- return -ENOMEM;
+ if (!edge_serial->read_urb) {
+ response = -ENOMEM;
+ break;
+ }
edge_serial->bulk_in_buffer =
kmalloc(buffer_size, GFP_KERNEL);
if (!edge_serial->bulk_in_buffer) {
- usb_free_urb(edge_serial->read_urb);
- return -ENOMEM;
+ response = -ENOMEM;
+ break;
}
edge_serial->bulk_in_endpoint =
endpoint->bEndpointAddress;
@@ -2924,9 +2928,22 @@ static int edge_startup(struct usb_serial *serial)
}
}
- if (!interrupt_in_found || !bulk_in_found || !bulk_out_found) {
- dev_err(ddev, "Error - the proper endpoints were not found!\n");
- return -ENODEV;
+ if (response || !interrupt_in_found || !bulk_in_found ||
+ !bulk_out_found) {
+ if (!response) {
+ dev_err(ddev, "expected endpoints not found\n");
+ response = -ENODEV;
+ }
+
+ usb_free_urb(edge_serial->interrupt_read_urb);
+ kfree(edge_serial->interrupt_in_buffer);
+
+ usb_free_urb(edge_serial->read_urb);
+ kfree(edge_serial->bulk_in_buffer);
+
+ kfree(edge_serial);
+
+ return response;
}
/* start interrupt read for this edgeport this interrupt will
@@ -2949,16 +2966,9 @@ static void edge_disconnect(struct usb_serial *serial)
{
struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
- /* stop reads and writes on all ports */
- /* free up our endpoint stuff */
if (edge_serial->is_epic) {
usb_kill_urb(edge_serial->interrupt_read_urb);
- usb_free_urb(edge_serial->interrupt_read_urb);
- kfree(edge_serial->interrupt_in_buffer);
-
usb_kill_urb(edge_serial->read_urb);
- usb_free_urb(edge_serial->read_urb);
- kfree(edge_serial->bulk_in_buffer);
}
}
@@ -2971,6 +2981,16 @@ static void edge_release(struct usb_serial *serial)
{
struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
+ if (edge_serial->is_epic) {
+ usb_kill_urb(edge_serial->interrupt_read_urb);
+ usb_free_urb(edge_serial->interrupt_read_urb);
+ kfree(edge_serial->interrupt_in_buffer);
+
+ usb_kill_urb(edge_serial->read_urb);
+ usb_free_urb(edge_serial->read_urb);
+ kfree(edge_serial->bulk_in_buffer);
+ }
+
kfree(edge_serial);
}
@@ -2376,6 +2376,10 @@ static void keyspan_release(struct usb_serial *serial)
s_priv = usb_get_serial_data(serial);
+ /* Make sure to unlink the URBs submitted in attach. */
+ usb_kill_urb(s_priv->instat_urb);
+ usb_kill_urb(s_priv->indat_urb);
+
usb_free_urb(s_priv->instat_urb);
usb_free_urb(s_priv->indat_urb);
usb_free_urb(s_priv->glocont_urb);
@@ -1263,6 +1263,15 @@ static int mxuport_attach(struct usb_serial *serial)
return 0;
}
+static void mxuport_release(struct usb_serial *serial)
+{
+ struct usb_serial_port *port0 = serial->port[0];
+ struct usb_serial_port *port1 = serial->port[1];
+
+ usb_serial_generic_close(port1);
+ usb_serial_generic_close(port0);
+}
+
static int mxuport_open(struct tty_struct *tty, struct usb_serial_port *port)
{
struct mxuport_port *mxport = usb_get_serial_port_data(port);
@@ -1365,6 +1374,7 @@ static struct usb_serial_driver mxuport_device = {
.probe = mxuport_probe,
.port_probe = mxuport_port_probe,
.attach = mxuport_attach,
+ .release = mxuport_release,
.calc_num_ports = mxuport_calc_num_ports,
.open = mxuport_open,
.close = mxuport_close,
@@ -378,18 +378,22 @@ static void option_instat_callback(struct urb *urb);
#define HAIER_PRODUCT_CE81B 0x10f8
#define HAIER_PRODUCT_CE100 0x2009
-/* Cinterion (formerly Siemens) products */
-#define SIEMENS_VENDOR_ID 0x0681
-#define CINTERION_VENDOR_ID 0x1e2d
+/* Gemalto's Cinterion products (formerly Siemens) */
+#define SIEMENS_VENDOR_ID 0x0681
+#define CINTERION_VENDOR_ID 0x1e2d
+#define CINTERION_PRODUCT_HC25_MDMNET 0x0040
#define CINTERION_PRODUCT_HC25_MDM 0x0047
-#define CINTERION_PRODUCT_HC25_MDMNET 0x0040
+#define CINTERION_PRODUCT_HC28_MDMNET 0x004A /* same for HC28J */
#define CINTERION_PRODUCT_HC28_MDM 0x004C
-#define CINTERION_PRODUCT_HC28_MDMNET 0x004A /* same for HC28J */
#define CINTERION_PRODUCT_EU3_E 0x0051
#define CINTERION_PRODUCT_EU3_P 0x0052
#define CINTERION_PRODUCT_PH8 0x0053
#define CINTERION_PRODUCT_AHXX 0x0055
#define CINTERION_PRODUCT_PLXX 0x0060
+#define CINTERION_PRODUCT_PH8_2RMNET 0x0082
+#define CINTERION_PRODUCT_PH8_AUDIO 0x0083
+#define CINTERION_PRODUCT_AHXX_2RMNET 0x0084
+#define CINTERION_PRODUCT_AHXX_AUDIO 0x0085
/* Olivetti products */
#define OLIVETTI_VENDOR_ID 0x0b3c
@@ -641,6 +645,10 @@ static const struct option_blacklist_info telit_le922_blacklist_usbcfg3 = {
.reserved = BIT(1) | BIT(2) | BIT(3),
};
+static const struct option_blacklist_info cinterion_rmnet2_blacklist = {
+ .reserved = BIT(4) | BIT(5),
+};
+
static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
@@ -1614,7 +1622,79 @@ static const struct usb_device_id option_ids[] = {
.driver_info = (kernel_ulong_t)&net_intf3_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0178, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf3_blacklist },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffe9, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff42, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff43, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff44, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff45, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff46, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff47, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff48, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff49, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff4a, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff4b, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff4c, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff4d, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff4e, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff4f, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff50, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff51, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff52, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff53, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff54, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff55, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff56, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff57, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff58, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff59, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff5a, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff5b, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff5c, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff5d, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff5e, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff5f, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff60, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff61, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff62, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff63, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff64, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff65, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff66, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff67, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff68, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff69, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff6a, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff6b, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff6c, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff6d, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff6e, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff6f, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff70, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff71, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff72, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff73, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff74, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff75, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff76, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff77, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff78, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff79, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff7a, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff7b, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff7c, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff7d, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff7e, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff7f, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff80, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff81, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff82, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff83, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff84, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff85, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff86, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff87, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff88, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff89, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff8a, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff8b, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff8c, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff8d, 0xff, 0xff, 0xff) },
@@ -1625,6 +1705,61 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff92, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff93, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff94, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff9f, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffa0, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffa1, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffa2, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffa3, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffa4, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffa5, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffa6, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffa7, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffa8, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffa9, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffaa, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffab, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffac, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffae, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffaf, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffb0, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffb1, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffb2, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffb3, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffb4, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffb5, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffb6, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffb7, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffb8, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffb9, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffba, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffbb, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffbc, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffbd, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffbe, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffbf, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffc0, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffc1, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffc2, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffc3, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffc4, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffc5, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffc6, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffc7, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffc8, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffc9, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffca, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffcb, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffcc, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffcd, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffce, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffcf, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffd0, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffd1, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffd2, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffd3, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffd4, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffd5, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffe9, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffec, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffee, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfff6, 0xff, 0xff, 0xff) },
@@ -1724,7 +1859,13 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX, 0xff) },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PLXX),
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
- { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) },
+ { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8_2RMNET, 0xff),
+ .driver_info = (kernel_ulong_t)&cinterion_rmnet2_blacklist },
+ { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8_AUDIO, 0xff),
+ .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+ { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX_2RMNET, 0xff) },
+ { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX_AUDIO, 0xff) },
+ { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) },
{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDM) },
{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDMNET) },
@@ -141,6 +141,7 @@ static void qt2_release(struct usb_serial *serial)
serial_priv = usb_get_serial_data(serial);
+ usb_kill_urb(serial_priv->read_urb);
usb_free_urb(serial_priv->read_urb);
kfree(serial_priv->read_buffer);
kfree(serial_priv);
@@ -487,7 +487,8 @@ static void eoi_pirq(struct irq_data *data)
if (!VALID_EVTCHN(evtchn))
return;
- if (unlikely(irqd_is_setaffinity_pending(data))) {
+ if (unlikely(irqd_is_setaffinity_pending(data)) &&
+ likely(!irqd_irq_disabled(data))) {
int masked = test_and_set_mask(evtchn);
clear_evtchn(evtchn);
@@ -1374,7 +1375,8 @@ static void ack_dynirq(struct irq_data *data)
if (!VALID_EVTCHN(evtchn))
return;
- if (unlikely(irqd_is_setaffinity_pending(data))) {
+ if (unlikely(irqd_is_setaffinity_pending(data)) &&
+ likely(!irqd_irq_disabled(data))) {
int masked = test_and_set_mask(evtchn);
clear_evtchn(evtchn);
@@ -526,7 +526,7 @@ affs_remount(struct super_block *sb, int *flags, char *data)
char *prefix = NULL;
new_opts = kstrdup(data, GFP_KERNEL);
- if (!new_opts)
+ if (data && !new_opts)
return -ENOMEM;
pr_debug("%s(flags=0x%x,opts=\"%s\")\n", __func__, *flags, data);
@@ -544,7 +544,8 @@ affs_remount(struct super_block *sb, int *flags, char *data)
}
flush_delayed_work(&sbi->sb_work);
- replace_mount_options(sb, new_opts);
+ if (new_opts)
+ replace_mount_options(sb, new_opts);
sbi->s_flags = mount_flags;
sbi->s_mode = mode;
@@ -3959,6 +3959,7 @@ void btrfs_test_inode_set_ops(struct inode *inode);
/* ioctl.c */
long btrfs_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
+long btrfs_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
void btrfs_update_iflags(struct inode *inode);
void btrfs_inherit_iflags(struct inode *inode, struct inode *dir);
int btrfs_is_empty_uuid(u8 *uuid);
@@ -2826,7 +2826,7 @@ const struct file_operations btrfs_file_operations = {
.fallocate = btrfs_fallocate,
.unlocked_ioctl = btrfs_ioctl,
#ifdef CONFIG_COMPAT
- .compat_ioctl = btrfs_ioctl,
+ .compat_ioctl = btrfs_compat_ioctl,
#endif
};
@@ -9933,7 +9933,7 @@ static const struct file_operations btrfs_dir_file_operations = {
.iterate = btrfs_real_readdir,
.unlocked_ioctl = btrfs_ioctl,
#ifdef CONFIG_COMPAT
- .compat_ioctl = btrfs_ioctl,
+ .compat_ioctl = btrfs_compat_ioctl,
#endif
.release = btrfs_release_file,
.fsync = btrfs_sync_file,
@@ -5640,3 +5640,24 @@ long btrfs_ioctl(struct file *file, unsigned int
return -ENOTTY;
}
+
+#ifdef CONFIG_COMPAT
+long btrfs_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+ switch (cmd) {
+ case FS_IOC32_GETFLAGS:
+ cmd = FS_IOC_GETFLAGS;
+ break;
+ case FS_IOC32_SETFLAGS:
+ cmd = FS_IOC_SETFLAGS;
+ break;
+ case FS_IOC32_GETVERSION:
+ cmd = FS_IOC_GETVERSION;
+ break;
+ default:
+ return -ENOIOCTLCMD;
+ }
+
+ return btrfs_ioctl(file, cmd, (unsigned long) compat_ptr(arg));
+}
+#endif
@@ -24,10 +24,13 @@
#include <linux/string.h>
#include <keys/user-type.h>
#include <linux/key-type.h>
+#include <linux/keyctl.h>
#include <linux/inet.h>
#include "cifsglob.h"
#include "cifs_spnego.h"
#include "cifs_debug.h"
+#include "cifsproto.h"
+static const struct cred *spnego_cred;
/* create a new cifs key */
static int
@@ -102,6 +105,7 @@ cifs_get_spnego_key(struct cifs_ses *sesInfo)
size_t desc_len;
struct key *spnego_key;
const char *hostname = server->hostname;
+ const struct cred *saved_cred;
/* length of fields (with semicolons): ver=0xyz ip4=ipaddress
host=hostname sec=mechanism uid=0xFF user=username */
@@ -163,7 +167,9 @@ cifs_get_spnego_key(struct cifs_ses *sesInfo)
sprintf(dp, ";pid=0x%x", current->pid);
cifs_dbg(FYI, "key description = %s\n", description);
+ saved_cred = override_creds(spnego_cred);
spnego_key = request_key(&cifs_spnego_key_type, description, "");
+ revert_creds(saved_cred);
#ifdef CONFIG_CIFS_DEBUG2
if (cifsFYI && !IS_ERR(spnego_key)) {
@@ -177,3 +183,64 @@ out:
kfree(description);
return spnego_key;
}
+
+int
+init_cifs_spnego(void)
+{
+ struct cred *cred;
+ struct key *keyring;
+ int ret;
+
+ cifs_dbg(FYI, "Registering the %s key type\n",
+ cifs_spnego_key_type.name);
+
+ /*
+ * Create an override credential set with special thread keyring for
+ * spnego upcalls.
+ */
+
+ cred = prepare_kernel_cred(NULL);
+ if (!cred)
+ return -ENOMEM;
+
+ keyring = keyring_alloc(".cifs_spnego",
+ GLOBAL_ROOT_UID, GLOBAL_ROOT_GID, cred,
+ (KEY_POS_ALL & ~KEY_POS_SETATTR) |
+ KEY_USR_VIEW | KEY_USR_READ,
+ KEY_ALLOC_NOT_IN_QUOTA, NULL);
+ if (IS_ERR(keyring)) {
+ ret = PTR_ERR(keyring);
+ goto failed_put_cred;
+ }
+
+ ret = register_key_type(&cifs_spnego_key_type);
+ if (ret < 0)
+ goto failed_put_key;
+
+ /*
+ * instruct request_key() to use this special keyring as a cache for
+ * the results it looks up
+ */
+ set_bit(KEY_FLAG_ROOT_CAN_CLEAR, &keyring->flags);
+ cred->thread_keyring = keyring;
+ cred->jit_keyring = KEY_REQKEY_DEFL_THREAD_KEYRING;
+ spnego_cred = cred;
+
+ cifs_dbg(FYI, "cifs spnego keyring: %d\n", key_serial(keyring));
+ return 0;
+
+failed_put_key:
+ key_put(keyring);
+failed_put_cred:
+ put_cred(cred);
+ return ret;
+}
+
+void
+exit_cifs_spnego(void)
+{
+ key_revoke(spnego_cred->thread_keyring);
+ unregister_key_type(&cifs_spnego_key_type);
+ put_cred(spnego_cred);
+ cifs_dbg(FYI, "Unregistered %s key type\n", cifs_spnego_key_type.name);
+}
@@ -1238,7 +1238,7 @@ init_cifs(void)
goto out_destroy_mids;
#ifdef CONFIG_CIFS_UPCALL
- rc = register_key_type(&cifs_spnego_key_type);
+ rc = init_cifs_spnego();
if (rc)
goto out_destroy_request_bufs;
#endif /* CONFIG_CIFS_UPCALL */
@@ -1261,7 +1261,7 @@ out_init_cifs_idmap:
out_register_key_type:
#endif
#ifdef CONFIG_CIFS_UPCALL
- unregister_key_type(&cifs_spnego_key_type);
+ exit_cifs_spnego();
out_destroy_request_bufs:
#endif
cifs_destroy_request_bufs();
@@ -60,6 +60,8 @@ do { \
} while (0)
extern int init_cifs_idmap(void);
extern void exit_cifs_idmap(void);
+extern int init_cifs_spnego(void);
+extern void exit_cifs_spnego(void);
extern char *build_path_from_dentry(struct dentry *);
extern char *cifs_build_path_to_root(struct smb_vol *vol,
struct cifs_sb_info *cifs_sb,
@@ -400,19 +400,27 @@ int build_ntlmssp_auth_blob(unsigned char *pbuffer,
sec_blob->LmChallengeResponse.MaximumLength = 0;
sec_blob->NtChallengeResponse.BufferOffset = cpu_to_le32(tmp - pbuffer);
- rc = setup_ntlmv2_rsp(ses, nls_cp);
- if (rc) {
- cifs_dbg(VFS, "Error %d during NTLMSSP authentication\n", rc);
- goto setup_ntlmv2_ret;
+ if (ses->user_name != NULL) {
+ rc = setup_ntlmv2_rsp(ses, nls_cp);
+ if (rc) {
+ cifs_dbg(VFS, "Error %d during NTLMSSP authentication\n", rc);
+ goto setup_ntlmv2_ret;
+ }
+ memcpy(tmp, ses->auth_key.response + CIFS_SESS_KEY_SIZE,
+ ses->auth_key.len - CIFS_SESS_KEY_SIZE);
+ tmp += ses->auth_key.len - CIFS_SESS_KEY_SIZE;
+
+ sec_blob->NtChallengeResponse.Length =
+ cpu_to_le16(ses->auth_key.len - CIFS_SESS_KEY_SIZE);
+ sec_blob->NtChallengeResponse.MaximumLength =
+ cpu_to_le16(ses->auth_key.len - CIFS_SESS_KEY_SIZE);
+ } else {
+ /*
+ * don't send an NT Response for anonymous access
+ */
+ sec_blob->NtChallengeResponse.Length = 0;
+ sec_blob->NtChallengeResponse.MaximumLength = 0;
}
- memcpy(tmp, ses->auth_key.response + CIFS_SESS_KEY_SIZE,
- ses->auth_key.len - CIFS_SESS_KEY_SIZE);
- tmp += ses->auth_key.len - CIFS_SESS_KEY_SIZE;
-
- sec_blob->NtChallengeResponse.Length =
- cpu_to_le16(ses->auth_key.len - CIFS_SESS_KEY_SIZE);
- sec_blob->NtChallengeResponse.MaximumLength =
- cpu_to_le16(ses->auth_key.len - CIFS_SESS_KEY_SIZE);
if (ses->domainName == NULL) {
sec_blob->DomainName.BufferOffset = cpu_to_le32(tmp - pbuffer);
@@ -670,20 +678,24 @@ sess_auth_lanman(struct sess_data *sess_data)
pSMB->req.hdr.Flags2 &= ~SMBFLG2_UNICODE;
- /* no capabilities flags in old lanman negotiation */
- pSMB->old_req.PasswordLength = cpu_to_le16(CIFS_AUTH_RESP_SIZE);
-
- /* Calculate hash with password and copy into bcc_ptr.
- * Encryption Key (stored as in cryptkey) gets used if the
- * security mode bit in Negottiate Protocol response states
- * to use challenge/response method (i.e. Password bit is 1).
- */
- rc = calc_lanman_hash(ses->password, ses->server->cryptkey,
- ses->server->sec_mode & SECMODE_PW_ENCRYPT ?
- true : false, lnm_session_key);
-
- memcpy(bcc_ptr, (char *)lnm_session_key, CIFS_AUTH_RESP_SIZE);
- bcc_ptr += CIFS_AUTH_RESP_SIZE;
+ if (ses->user_name != NULL) {
+ /* no capabilities flags in old lanman negotiation */
+ pSMB->old_req.PasswordLength = cpu_to_le16(CIFS_AUTH_RESP_SIZE);
+
+ /* Calculate hash with password and copy into bcc_ptr.
+ * Encryption Key (stored as in cryptkey) gets used if the
+ * security mode bit in Negottiate Protocol response states
+ * to use challenge/response method (i.e. Password bit is 1).
+ */
+ rc = calc_lanman_hash(ses->password, ses->server->cryptkey,
+ ses->server->sec_mode & SECMODE_PW_ENCRYPT ?
+ true : false, lnm_session_key);
+
+ memcpy(bcc_ptr, (char *)lnm_session_key, CIFS_AUTH_RESP_SIZE);
+ bcc_ptr += CIFS_AUTH_RESP_SIZE;
+ } else {
+ pSMB->old_req.PasswordLength = 0;
+ }
/*
* can not sign if LANMAN negotiated so no need
@@ -769,26 +781,31 @@ sess_auth_ntlm(struct sess_data *sess_data)
capabilities = cifs_ssetup_hdr(ses, pSMB);
pSMB->req_no_secext.Capabilities = cpu_to_le32(capabilities);
- pSMB->req_no_secext.CaseInsensitivePasswordLength =
- cpu_to_le16(CIFS_AUTH_RESP_SIZE);
- pSMB->req_no_secext.CaseSensitivePasswordLength =
- cpu_to_le16(CIFS_AUTH_RESP_SIZE);
-
- /* calculate ntlm response and session key */
- rc = setup_ntlm_response(ses, sess_data->nls_cp);
- if (rc) {
- cifs_dbg(VFS, "Error %d during NTLM authentication\n",
- rc);
- goto out;
- }
+ if (ses->user_name != NULL) {
+ pSMB->req_no_secext.CaseInsensitivePasswordLength =
+ cpu_to_le16(CIFS_AUTH_RESP_SIZE);
+ pSMB->req_no_secext.CaseSensitivePasswordLength =
+ cpu_to_le16(CIFS_AUTH_RESP_SIZE);
+
+ /* calculate ntlm response and session key */
+ rc = setup_ntlm_response(ses, sess_data->nls_cp);
+ if (rc) {
+ cifs_dbg(VFS, "Error %d during NTLM authentication\n",
+ rc);
+ goto out;
+ }
- /* copy ntlm response */
- memcpy(bcc_ptr, ses->auth_key.response + CIFS_SESS_KEY_SIZE,
- CIFS_AUTH_RESP_SIZE);
- bcc_ptr += CIFS_AUTH_RESP_SIZE;
- memcpy(bcc_ptr, ses->auth_key.response + CIFS_SESS_KEY_SIZE,
- CIFS_AUTH_RESP_SIZE);
- bcc_ptr += CIFS_AUTH_RESP_SIZE;
+ /* copy ntlm response */
+ memcpy(bcc_ptr, ses->auth_key.response + CIFS_SESS_KEY_SIZE,
+ CIFS_AUTH_RESP_SIZE);
+ bcc_ptr += CIFS_AUTH_RESP_SIZE;
+ memcpy(bcc_ptr, ses->auth_key.response + CIFS_SESS_KEY_SIZE,
+ CIFS_AUTH_RESP_SIZE);
+ bcc_ptr += CIFS_AUTH_RESP_SIZE;
+ } else {
+ pSMB->req_no_secext.CaseInsensitivePasswordLength = 0;
+ pSMB->req_no_secext.CaseSensitivePasswordLength = 0;
+ }
if (ses->capabilities & CAP_UNICODE) {
/* unicode strings must be word aligned */
@@ -878,22 +895,26 @@ sess_auth_ntlmv2(struct sess_data *sess_data)
/* LM2 password would be here if we supported it */
pSMB->req_no_secext.CaseInsensitivePasswordLength = 0;
- /* calculate nlmv2 response and session key */
- rc = setup_ntlmv2_rsp(ses, sess_data->nls_cp);
- if (rc) {
- cifs_dbg(VFS, "Error %d during NTLMv2 authentication\n", rc);
- goto out;
- }
+ if (ses->user_name != NULL) {
+ /* calculate nlmv2 response and session key */
+ rc = setup_ntlmv2_rsp(ses, sess_data->nls_cp);
+ if (rc) {
+ cifs_dbg(VFS, "Error %d during NTLMv2 authentication\n", rc);
+ goto out;
+ }
- memcpy(bcc_ptr, ses->auth_key.response + CIFS_SESS_KEY_SIZE,
- ses->auth_key.len - CIFS_SESS_KEY_SIZE);
- bcc_ptr += ses->auth_key.len - CIFS_SESS_KEY_SIZE;
+ memcpy(bcc_ptr, ses->auth_key.response + CIFS_SESS_KEY_SIZE,
+ ses->auth_key.len - CIFS_SESS_KEY_SIZE);
+ bcc_ptr += ses->auth_key.len - CIFS_SESS_KEY_SIZE;
- /* set case sensitive password length after tilen may get
- * assigned, tilen is 0 otherwise.
- */
- pSMB->req_no_secext.CaseSensitivePasswordLength =
- cpu_to_le16(ses->auth_key.len - CIFS_SESS_KEY_SIZE);
+ /* set case sensitive password length after tilen may get
+ * assigned, tilen is 0 otherwise.
+ */
+ pSMB->req_no_secext.CaseSensitivePasswordLength =
+ cpu_to_le16(ses->auth_key.len - CIFS_SESS_KEY_SIZE);
+ } else {
+ pSMB->req_no_secext.CaseSensitivePasswordLength = 0;
+ }
if (ses->capabilities & CAP_UNICODE) {
if (sess_data->iov[0].iov_len % 2) {
@@ -44,6 +44,7 @@
#define SMB2_OP_DELETE 7
#define SMB2_OP_HARDLINK 8
#define SMB2_OP_SET_EOF 9
+#define SMB2_OP_RMDIR 10
/* Used when constructing chained read requests. */
#define CHAINED_REQUEST 1
@@ -80,6 +80,10 @@ smb2_open_op_close(const unsigned int xid, struct cifs_tcon *tcon,
* SMB2_open() call.
*/
break;
+ case SMB2_OP_RMDIR:
+ tmprc = SMB2_rmdir(xid, tcon, fid.persistent_fid,
+ fid.volatile_fid);
+ break;
case SMB2_OP_RENAME:
tmprc = SMB2_rename(xid, tcon, fid.persistent_fid,
fid.volatile_fid, (__le16 *)data);
@@ -191,8 +195,8 @@ smb2_rmdir(const unsigned int xid, struct cifs_tcon *tcon, const char *name,
struct cifs_sb_info *cifs_sb)
{
return smb2_open_op_close(xid, tcon, cifs_sb, name, DELETE, FILE_OPEN,
- CREATE_NOT_FILE | CREATE_DELETE_ON_CLOSE,
- NULL, SMB2_OP_DELETE);
+ CREATE_NOT_FILE,
+ NULL, SMB2_OP_RMDIR);
}
int
@@ -2443,6 +2443,22 @@ SMB2_rename(const unsigned int xid, struct cifs_tcon *tcon,
}
int
+SMB2_rmdir(const unsigned int xid, struct cifs_tcon *tcon,
+ u64 persistent_fid, u64 volatile_fid)
+{
+ __u8 delete_pending = 1;
+ void *data;
+ unsigned int size;
+
+ data = &delete_pending;
+ size = 1; /* sizeof __u8 */
+
+ return send_set_info(xid, tcon, persistent_fid, volatile_fid,
+ current->tgid, FILE_DISPOSITION_INFORMATION, 1, &data,
+ &size);
+}
+
+int
SMB2_set_hardlink(const unsigned int xid, struct cifs_tcon *tcon,
u64 persistent_fid, u64 volatile_fid, __le16 *target_file)
{
@@ -140,6 +140,8 @@ extern int SMB2_query_directory(const unsigned int xid, struct cifs_tcon *tcon,
extern int SMB2_rename(const unsigned int xid, struct cifs_tcon *tcon,
u64 persistent_fid, u64 volatile_fid,
__le16 *target_file);
+extern int SMB2_rmdir(const unsigned int xid, struct cifs_tcon *tcon,
+ u64 persistent_fid, u64 volatile_fid);
extern int SMB2_set_hardlink(const unsigned int xid, struct cifs_tcon *tcon,
u64 persistent_fid, u64 volatile_fid,
__le16 *target_file);
@@ -1137,11 +1137,13 @@ struct inode *ext4_orphan_get(struct super_block *sb, unsigned long ino)
goto iget_failed;
/*
- * If the orphans has i_nlinks > 0 then it should be able to be
- * truncated, otherwise it won't be removed from the orphan list
- * during processing and an infinite loop will result.
+ * If the orphans has i_nlinks > 0 then it should be able to
+ * be truncated, otherwise it won't be removed from the orphan
+ * list during processing and an infinite loop will result.
+ * Similarly, it must not be a bad inode.
*/
- if (inode->i_nlink && !ext4_can_truncate(inode))
+ if ((inode->i_nlink && !ext4_can_truncate(inode)) ||
+ is_bad_inode(inode))
goto bad_orphan;
if (NEXT_ORPHAN(inode) > max_ino)
@@ -1252,6 +1252,7 @@ static void ext4_mb_unload_buddy(struct ext4_buddy *e4b)
static int mb_find_order_for_block(struct ext4_buddy *e4b, int block)
{
int order = 1;
+ int bb_incr = 1 << (e4b->bd_blkbits - 1);
void *bb;
BUG_ON(e4b->bd_bitmap == e4b->bd_buddy);
@@ -1264,7 +1265,8 @@ static int mb_find_order_for_block(struct ext4_buddy *e4b, int block)
/* this block is part of buddy of order 'order' */
return order;
}
- bb += 1 << (e4b->bd_blkbits - order);
+ bb += bb_incr;
+ bb_incr >>= 1;
order++;
}
return 0;
@@ -2569,7 +2571,7 @@ int ext4_mb_init(struct super_block *sb)
{
struct ext4_sb_info *sbi = EXT4_SB(sb);
unsigned i, j;
- unsigned offset;
+ unsigned offset, offset_incr;
unsigned max;
int ret;
@@ -2598,11 +2600,13 @@ int ext4_mb_init(struct super_block *sb)
i = 1;
offset = 0;
+ offset_incr = 1 << (sb->s_blocksize_bits - 1);
max = sb->s_blocksize << 2;
do {
sbi->s_mb_offsets[i] = offset;
sbi->s_mb_maxs[i] = max;
- offset += 1 << (sb->s_blocksize_bits - i);
+ offset += offset_incr;
+ offset_incr = offset_incr >> 1;
max = max >> 1;
i++;
} while (i <= sb->s_blocksize_bits + 1);
@@ -2805,7 +2805,7 @@ int ext4_orphan_add(handle_t *handle, struct inode *inode)
* list entries can cause panics at unmount time.
*/
mutex_lock(&sbi->s_orphan_lock);
- list_del(&EXT4_I(inode)->i_orphan);
+ list_del_init(&EXT4_I(inode)->i_orphan);
mutex_unlock(&sbi->s_orphan_lock);
}
}
@@ -15,6 +15,7 @@
#include <linux/sched.h>
#include <linux/bitmap.h>
#include <linux/slab.h>
+#include <linux/seq_file.h>
/* Mark the filesystem dirty, so that chkdsk checks it when os/2 booted */
@@ -453,10 +454,6 @@ static int hpfs_remount_fs(struct super_block *s, int *flags, char *data)
int lowercase, eas, chk, errs, chkdsk, timeshift;
int o;
struct hpfs_sb_info *sbi = hpfs_sb(s);
- char *new_opts = kstrdup(data, GFP_KERNEL);
-
- if (!new_opts)
- return -ENOMEM;
sync_filesystem(s);
@@ -493,17 +490,44 @@ static int hpfs_remount_fs(struct super_block *s, int *flags, char *data)
if (!(*flags & MS_RDONLY)) mark_dirty(s, 1);
- replace_mount_options(s, new_opts);
-
hpfs_unlock(s);
return 0;
out_err:
hpfs_unlock(s);
- kfree(new_opts);
return -EINVAL;
}
+static int hpfs_show_options(struct seq_file *seq, struct dentry *root)
+{
+ struct hpfs_sb_info *sbi = hpfs_sb(root->d_sb);
+
+ seq_printf(seq, ",uid=%u", from_kuid_munged(&init_user_ns, sbi->sb_uid));
+ seq_printf(seq, ",gid=%u", from_kgid_munged(&init_user_ns, sbi->sb_gid));
+ seq_printf(seq, ",umask=%03o", (~sbi->sb_mode & 0777));
+ if (sbi->sb_lowercase)
+ seq_printf(seq, ",case=lower");
+ if (!sbi->sb_chk)
+ seq_printf(seq, ",check=none");
+ if (sbi->sb_chk == 2)
+ seq_printf(seq, ",check=strict");
+ if (!sbi->sb_err)
+ seq_printf(seq, ",errors=continue");
+ if (sbi->sb_err == 2)
+ seq_printf(seq, ",errors=panic");
+ if (!sbi->sb_chkdsk)
+ seq_printf(seq, ",chkdsk=no");
+ if (sbi->sb_chkdsk == 2)
+ seq_printf(seq, ",chkdsk=always");
+ if (!sbi->sb_eas)
+ seq_printf(seq, ",eas=no");
+ if (sbi->sb_eas == 1)
+ seq_printf(seq, ",eas=ro");
+ if (sbi->sb_timeshift)
+ seq_printf(seq, ",timeshift=%d", sbi->sb_timeshift);
+ return 0;
+}
+
/* Super operations */
static const struct super_operations hpfs_sops =
@@ -514,7 +538,7 @@ static const struct super_operations hpfs_sops =
.put_super = hpfs_put_super,
.statfs = hpfs_statfs,
.remount_fs = hpfs_remount_fs,
- .show_options = generic_show_options,
+ .show_options = hpfs_show_options,
};
static int hpfs_fill_super(struct super_block *s, void *options, int silent)
@@ -537,8 +561,6 @@ static int hpfs_fill_super(struct super_block *s, void *options, int silent)
int o;
- save_mount_options(s, options);
-
sbi = kzalloc(sizeof(*sbi), GFP_KERNEL);
if (!sbi) {
return -ENOMEM;
@@ -6020,6 +6020,7 @@ static int nfs41_lock_expired(struct nfs4_state *state, struct file_lock *reques
static int _nfs4_proc_setlk(struct nfs4_state *state, int cmd, struct file_lock *request)
{
struct nfs_inode *nfsi = NFS_I(state->inode);
+ struct nfs4_state_owner *sp = state->owner;
unsigned char fl_flags = request->fl_flags;
int status = -ENOLCK;
@@ -6034,6 +6035,7 @@ static int _nfs4_proc_setlk(struct nfs4_state *state, int cmd, struct file_lock
status = do_vfs_lock(state->inode, request);
if (status < 0)
goto out;
+ mutex_lock(&sp->so_delegreturn_mutex);
down_read(&nfsi->rwsem);
if (test_bit(NFS_DELEGATED_STATE, &state->flags)) {
/* Yes: cache locks! */
@@ -6041,9 +6043,11 @@ static int _nfs4_proc_setlk(struct nfs4_state *state, int cmd, struct file_lock
request->fl_flags = fl_flags & ~FL_SLEEP;
status = do_vfs_lock(state->inode, request);
up_read(&nfsi->rwsem);
+ mutex_unlock(&sp->so_delegreturn_mutex);
goto out;
}
up_read(&nfsi->rwsem);
+ mutex_unlock(&sp->so_delegreturn_mutex);
status = _nfs4_do_setlk(state, cmd, request, NFS_LOCK_NEW);
out:
request->fl_flags = fl_flags;
@@ -243,8 +243,8 @@ xfs_growfs_data_private(
agf->agf_roots[XFS_BTNUM_CNTi] = cpu_to_be32(XFS_CNT_BLOCK(mp));
agf->agf_levels[XFS_BTNUM_BNOi] = cpu_to_be32(1);
agf->agf_levels[XFS_BTNUM_CNTi] = cpu_to_be32(1);
- agf->agf_flfirst = 0;
- agf->agf_fllast = cpu_to_be32(XFS_AGFL_SIZE(mp) - 1);
+ agf->agf_flfirst = cpu_to_be32(1);
+ agf->agf_fllast = 0;
agf->agf_flcount = 0;
tmpsize = agsize - XFS_PREALLOC_BLOCKS(mp);
agf->agf_freeblks = cpu_to_be32(tmpsize);
@@ -3164,13 +3164,14 @@ xfs_iflush_cluster(
* We need to check under the i_flags_lock for a valid inode
* here. Skip it if it is not valid or the wrong inode.
*/
- spin_lock(&ip->i_flags_lock);
- if (!ip->i_ino ||
+ spin_lock(&iq->i_flags_lock);
+ if (!iq->i_ino ||
+ __xfs_iflags_test(iq, XFS_ISTALE) ||
(XFS_INO_TO_AGINO(mp, iq->i_ino) & mask) != first_index) {
- spin_unlock(&ip->i_flags_lock);
+ spin_unlock(&iq->i_flags_lock);
continue;
}
- spin_unlock(&ip->i_flags_lock);
+ spin_unlock(&iq->i_flags_lock);
/*
* Do an un-protected check to see if the inode is dirty and
@@ -3286,7 +3287,7 @@ xfs_iflush(
struct xfs_buf **bpp)
{
struct xfs_mount *mp = ip->i_mount;
- struct xfs_buf *bp;
+ struct xfs_buf *bp = NULL;
struct xfs_dinode *dip;
int error;
@@ -3328,14 +3329,22 @@ xfs_iflush(
}
/*
- * Get the buffer containing the on-disk inode.
+ * Get the buffer containing the on-disk inode. We are doing a try-lock
+ * operation here, so we may get an EAGAIN error. In that case, we
+ * simply want to return with the inode still dirty.
+ *
+ * If we get any other error, we effectively have a corruption situation
+ * and we cannot flush the inode, so we treat it the same as failing
+ * xfs_iflush_int().
*/
error = xfs_imap_to_bp(mp, NULL, &ip->i_imap, &dip, &bp, XBF_TRYLOCK,
0);
- if (error || !bp) {
+ if (error == -EAGAIN) {
xfs_ifunlock(ip);
return error;
}
+ if (error)
+ goto corrupt_out;
/*
* First flush out the inode that xfs_iflush was called with.
@@ -3363,7 +3372,8 @@ xfs_iflush(
return 0;
corrupt_out:
- xfs_buf_relse(bp);
+ if (bp)
+ xfs_buf_relse(bp);
xfs_force_shutdown(mp, SHUTDOWN_CORRUPT_INCORE);
cluster_corrupt_out:
error = -EFSCORRUPTED;
@@ -1240,6 +1240,16 @@ xfs_fs_remount(
return -EINVAL;
}
+ if (XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_5 &&
+ xfs_sb_has_ro_compat_feature(sbp,
+ XFS_SB_FEAT_RO_COMPAT_UNKNOWN)) {
+ xfs_warn(mp,
+"ro->rw transition prohibited on unknown (0x%x) ro-compat filesystem",
+ (sbp->sb_features_ro_compat &
+ XFS_SB_FEAT_RO_COMPAT_UNKNOWN));
+ return -EINVAL;
+ }
+
mp->m_flags &= ~XFS_MOUNT_RDONLY;
/*
@@ -7,10 +7,10 @@
static __always_inline int preempt_count(void)
{
- return current_thread_info()->preempt_count;
+ return READ_ONCE(current_thread_info()->preempt_count);
}
-static __always_inline int *preempt_count_ptr(void)
+static __always_inline volatile int *preempt_count_ptr(void)
{
return ¤t_thread_info()->preempt_count;
}
@@ -27,7 +27,30 @@
*/
static __always_inline int queued_spin_is_locked(struct qspinlock *lock)
{
- return atomic_read(&lock->val);
+ /*
+ * queued_spin_lock_slowpath() can ACQUIRE the lock before
+ * issuing the unordered store that sets _Q_LOCKED_VAL.
+ *
+ * See both smp_cond_acquire() sites for more detail.
+ *
+ * This however means that in code like:
+ *
+ * spin_lock(A) spin_lock(B)
+ * spin_unlock_wait(B) spin_is_locked(A)
+ * do_something() do_something()
+ *
+ * Both CPUs can end up running do_something() because the store
+ * setting _Q_LOCKED_VAL will pass through the loads in
+ * spin_unlock_wait() and/or spin_is_locked().
+ *
+ * Avoid this by issuing a full memory barrier between the spin_lock()
+ * and the loads in spin_unlock_wait() and spin_is_locked().
+ *
+ * Note that regular mutual exclusion doesn't care about this
+ * delayed store.
+ */
+ smp_mb();
+ return atomic_read(&lock->val) & _Q_LOCKED_MASK;
}
/**
@@ -107,6 +130,8 @@ static __always_inline void queued_spin_unlock(struct qspinlock *lock)
*/
static inline void queued_spin_unlock_wait(struct qspinlock *lock)
{
+ /* See queued_spin_is_locked() */
+ smp_mb();
while (atomic_read(&lock->val) & _Q_LOCKED_MASK)
cpu_relax();
}
@@ -17,21 +17,6 @@
struct siginfo;
void do_schedule_next_timer(struct siginfo *info);
-#ifndef HAVE_ARCH_COPY_SIGINFO
-
-#include <linux/string.h>
-
-static inline void copy_siginfo(struct siginfo *to, struct siginfo *from)
-{
- if (from->si_code < 0)
- memcpy(to, from, sizeof(*to));
- else
- /* _sigchld is currently the largest know union member */
- memcpy(to, from, __ARCH_SI_PREAMBLE_SIZE + sizeof(from->_sifields._sigchld));
-}
-
-#endif
-
extern int copy_siginfo_to_user(struct siginfo __user *to, const struct siginfo *from);
#endif
@@ -39,8 +39,11 @@ struct can_priv {
struct can_clock clock;
enum can_state state;
- u32 ctrlmode;
- u32 ctrlmode_supported;
+
+ /* CAN controller features - see include/uapi/linux/can/netlink.h */
+ u32 ctrlmode; /* current options setting */
+ u32 ctrlmode_supported; /* options that can be modified by netlink */
+ u32 ctrlmode_static; /* static enabled options for driver/hardware */
int restart_ms;
struct timer_list restart_timer;
@@ -107,6 +110,21 @@ static inline bool can_is_canfd_skb(const struct sk_buff *skb)
return skb->len == CANFD_MTU;
}
+/* helper to define static CAN controller features at device creation time */
+static inline void can_set_static_ctrlmode(struct net_device *dev,
+ u32 static_mode)
+{
+ struct can_priv *priv = netdev_priv(dev);
+
+ /* alloc_candev() succeeded => netdev_priv() is valid at this point */
+ priv->ctrlmode = static_mode;
+ priv->ctrlmode_static = static_mode;
+
+ /* override MTU which was set by default in can_setup()? */
+ if (static_mode & CAN_CTRLMODE_FD)
+ dev->mtu = CANFD_MTU;
+}
+
/* get data length from can_dlc with sanitized can_dlc */
u8 can_dlc2len(u8 can_dlc);
@@ -1236,8 +1236,11 @@ do { \
dev_printk(KERN_DEBUG, dev, fmt, ##__VA_ARGS__); \
} while (0)
#else
-#define dev_dbg_ratelimited(dev, fmt, ...) \
- no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
+#define dev_dbg_ratelimited(dev, fmt, ...) \
+do { \
+ if (0) \
+ dev_printk(KERN_DEBUG, dev, fmt, ##__VA_ARGS__); \
+} while (0)
#endif
#ifdef VERBOSE_DEBUG
@@ -67,10 +67,12 @@ struct iio_buffer_access_funcs {
* @access: [DRIVER] buffer access functions associated with the
* implementation.
* @scan_el_dev_attr_list:[INTERN] list of scan element related attributes.
+ * @buffer_group: [INTERN] attributes of the buffer group
* @scan_el_group: [DRIVER] attribute group for those attributes not
* created from the iio_chan_info array.
* @pollq: [INTERN] wait queue to allow for polling on the buffer.
* @stufftoread: [INTERN] flag to indicate new data.
+ * @attrs: [INTERN] standard attributes of the buffer
* @demux_list: [INTERN] list of operations required to demux the scan.
* @demux_bounce: [INTERN] buffer for doing gather from incoming scan.
* @buffer_list: [INTERN] entry in the devices list of current buffers.
@@ -1797,7 +1797,6 @@ struct security_hook_heads {
struct list_head tun_dev_attach_queue;
struct list_head tun_dev_attach;
struct list_head tun_dev_open;
- struct list_head skb_owned_by;
#endif /* CONFIG_SECURITY_NETWORK */
#ifdef CONFIG_SECURITY_NETWORK_XFRM
struct list_head xfrm_policy_alloc_security;
@@ -1684,7 +1684,7 @@ extern void free_highmem_page(struct page *page);
extern void adjust_managed_page_count(struct page *page, long count);
extern void mem_init_print_info(const char *str);
-extern void reserve_bootmem_region(unsigned long start, unsigned long end);
+extern void reserve_bootmem_region(phys_addr_t start, phys_addr_t end);
/* Free the reserved page into the buddy system, so it gets managed. */
static inline void __free_reserved_page(struct page *page)
@@ -28,6 +28,21 @@ struct sigpending {
sigset_t signal;
};
+#ifndef HAVE_ARCH_COPY_SIGINFO
+
+#include <linux/string.h>
+
+static inline void copy_siginfo(struct siginfo *to, struct siginfo *from)
+{
+ if (from->si_code < 0)
+ memcpy(to, from, sizeof(*to));
+ else
+ /* _sigchld is currently the largest know union member */
+ memcpy(to, from, __ARCH_SI_PREAMBLE_SIZE + sizeof(from->_sifields._sigchld));
+}
+
+#endif
+
/*
* Define some primitives to manipulate sigset_t.
*/
@@ -158,9 +158,9 @@ typedef __be32 rpc_fraghdr;
/*
* Note that RFC 1833 does not put any size restrictions on the
- * netid string, but all currently defined netid's fit in 4 bytes.
+ * netid string, but all currently defined netid's fit in 5 bytes.
*/
-#define RPCBIND_MAXNETIDLEN (4u)
+#define RPCBIND_MAXNETIDLEN (5u)
/*
* Universal addresses are introduced in RFC 1833 and further spelled
@@ -339,7 +339,6 @@ struct tty_file_private {
#define TTY_EXCLUSIVE 3 /* Exclusive open mode */
#define TTY_DEBUG 4 /* Debugging */
#define TTY_DO_WRITE_WAKEUP 5 /* Call write_wakeup after queuing new */
-#define TTY_OTHER_DONE 6 /* Closed pty has completed input processing */
#define TTY_LDISC_OPEN 11 /* Line discipline is open */
#define TTY_PTY_LOCK 16 /* pty private */
#define TTY_NO_WRITE_SPLIT 17 /* Preserve write boundaries to driver */
@@ -467,6 +466,9 @@ extern void tty_buffer_free_all(struct tty_port *port);
extern void tty_buffer_flush(struct tty_struct *tty, struct tty_ldisc *ld);
extern void tty_buffer_init(struct tty_port *port);
extern void tty_buffer_set_lock_subclass(struct tty_port *port);
+extern bool tty_buffer_restart_work(struct tty_port *port);
+extern bool tty_buffer_cancel_work(struct tty_port *port);
+extern void tty_buffer_flush_work(struct tty_port *port);
extern speed_t tty_termios_baud_rate(struct ktermios *termios);
extern speed_t tty_termios_input_baud_rate(struct ktermios *termios);
extern void tty_termios_encode_baud_rate(struct ktermios *termios,
@@ -367,14 +367,13 @@ struct usb_bus {
int devnum_next; /* Next open device number in
* round-robin allocation */
+ struct mutex devnum_next_mutex; /* devnum_next mutex */
struct usb_devmap devmap; /* device address allocation map */
struct usb_device *root_hub; /* Root hub */
struct usb_bus *hs_companion; /* Companion EHCI bus, if any */
struct list_head bus_list; /* list of busses */
- struct mutex usb_address0_mutex; /* unaddressed device mutex */
-
int bandwidth_allocated; /* on this bus: how much of the time
* reserved for periodic (intr/iso)
* requests is used, on average?
@@ -1060,7 +1059,7 @@ struct usbdrv_wrap {
* for interfaces bound to this driver.
* @soft_unbind: if set to 1, the USB core will not kill URBs and disable
* endpoints before calling the driver's disconnect method.
- * @disable_hub_initiated_lpm: if set to 0, the USB core will not allow hubs
+ * @disable_hub_initiated_lpm: if set to 1, the USB core will not allow hubs
* to initiate lower power link state transitions when an idle timeout
* occurs. Device-initiated USB 3.0 link PM will still be allowed.
*
@@ -169,6 +169,7 @@ struct usb_hcd {
* bandwidth_mutex should be dropped after a successful control message
* to the device, or resetting the bandwidth after a failed attempt.
*/
+ struct mutex *address0_mutex;
struct mutex *bandwidth_mutex;
struct usb_hcd *shared_hcd;
struct usb_hcd *primary_hcd;
@@ -259,6 +259,7 @@ scmd_printk(const char *, const struct scsi_cmnd *, const char *, ...);
enum scsi_target_state {
STARGET_CREATED = 1,
STARGET_RUNNING,
+ STARGET_REMOVE,
STARGET_DEL,
};
@@ -52,7 +52,7 @@
#if defined(__GLIBC__)
/* Coordinate with glibc net/if.h header. */
-#if defined(_NET_IF_H)
+#if defined(_NET_IF_H) && defined(__USE_MISC)
/* GLIBC headers included first so don't define anything
* that would already be defined. */
@@ -914,17 +914,28 @@ static int eligible_pid(struct wait_opts *wo, struct task_struct *p)
task_pid_type(p, wo->wo_type) == wo->wo_pid;
}
-static int eligible_child(struct wait_opts *wo, struct task_struct *p)
+static int
+eligible_child(struct wait_opts *wo, bool ptrace, struct task_struct *p)
{
if (!eligible_pid(wo, p))
return 0;
- /* Wait for all children (clone and not) if __WALL is set;
- * otherwise, wait for clone children *only* if __WCLONE is
- * set; otherwise, wait for non-clone children *only*. (Note:
- * A "clone" child here is one that reports to its parent
- * using a signal other than SIGCHLD.) */
- if (((p->exit_signal != SIGCHLD) ^ !!(wo->wo_flags & __WCLONE))
- && !(wo->wo_flags & __WALL))
+
+ /*
+ * Wait for all children (clone and not) if __WALL is set or
+ * if it is traced by us.
+ */
+ if (ptrace || (wo->wo_flags & __WALL))
+ return 1;
+
+ /*
+ * Otherwise, wait for clone children *only* if __WCLONE is set;
+ * otherwise, wait for non-clone children *only*.
+ *
+ * Note: a "clone" child here is one that reports to its parent
+ * using a signal other than SIGCHLD, or a non-leader thread which
+ * we can only see if it is traced by us.
+ */
+ if ((p->exit_signal != SIGCHLD) ^ !!(wo->wo_flags & __WCLONE))
return 0;
return 1;
@@ -1297,7 +1308,7 @@ static int wait_consider_task(struct wait_opts *wo, int ptrace,
if (unlikely(exit_state == EXIT_DEAD))
return 0;
- ret = eligible_child(wo, p);
+ ret = eligible_child(wo, ptrace, p);
if (!ret)
return ret;
@@ -99,10 +99,13 @@ long calc_load_fold_active(struct rq *this_rq)
static unsigned long
calc_load(unsigned long load, unsigned long exp, unsigned long active)
{
- load *= exp;
- load += active * (FIXED_1 - exp);
- load += 1UL << (FSHIFT - 1);
- return load >> FSHIFT;
+ unsigned long newload;
+
+ newload = load * exp + active * (FIXED_1 - exp);
+ if (active >= load)
+ newload += FIXED_1-1;
+
+ return newload / FIXED_1;
}
#ifdef CONFIG_NO_HZ_COMMON
@@ -426,7 +426,7 @@ struct ring_buffer_per_cpu {
raw_spinlock_t reader_lock; /* serialize readers */
arch_spinlock_t lock;
struct lock_class_key lock_key;
- unsigned int nr_pages;
+ unsigned long nr_pages;
unsigned int current_context;
struct list_head *pages;
struct buffer_page *head_page; /* read from head */
@@ -447,7 +447,7 @@ struct ring_buffer_per_cpu {
u64 write_stamp;
u64 read_stamp;
/* ring buffer pages to update, > 0 to add, < 0 to remove */
- int nr_pages_to_update;
+ long nr_pages_to_update;
struct list_head new_pages; /* new pages to add */
struct work_struct update_pages_work;
struct completion update_done;
@@ -1126,10 +1126,10 @@ static int rb_check_pages(struct ring_buffer_per_cpu *cpu_buffer)
return 0;
}
-static int __rb_allocate_pages(int nr_pages, struct list_head *pages, int cpu)
+static int __rb_allocate_pages(long nr_pages, struct list_head *pages, int cpu)
{
- int i;
struct buffer_page *bpage, *tmp;
+ long i;
for (i = 0; i < nr_pages; i++) {
struct page *page;
@@ -1166,7 +1166,7 @@ free_pages:
}
static int rb_allocate_pages(struct ring_buffer_per_cpu *cpu_buffer,
- unsigned nr_pages)
+ unsigned long nr_pages)
{
LIST_HEAD(pages);
@@ -1191,7 +1191,7 @@ static int rb_allocate_pages(struct ring_buffer_per_cpu *cpu_buffer,
}
static struct ring_buffer_per_cpu *
-rb_allocate_cpu_buffer(struct ring_buffer *buffer, int nr_pages, int cpu)
+rb_allocate_cpu_buffer(struct ring_buffer *buffer, long nr_pages, int cpu)
{
struct ring_buffer_per_cpu *cpu_buffer;
struct buffer_page *bpage;
@@ -1291,8 +1291,9 @@ struct ring_buffer *__ring_buffer_alloc(unsigned long size, unsigned flags,
struct lock_class_key *key)
{
struct ring_buffer *buffer;
+ long nr_pages;
int bsize;
- int cpu, nr_pages;
+ int cpu;
/* keep it in its own cache line */
buffer = kzalloc(ALIGN(sizeof(*buffer), cache_line_size()),
@@ -1418,12 +1419,12 @@ static inline unsigned long rb_page_write(struct buffer_page *bpage)
}
static int
-rb_remove_pages(struct ring_buffer_per_cpu *cpu_buffer, unsigned int nr_pages)
+rb_remove_pages(struct ring_buffer_per_cpu *cpu_buffer, unsigned long nr_pages)
{
struct list_head *tail_page, *to_remove, *next_page;
struct buffer_page *to_remove_page, *tmp_iter_page;
struct buffer_page *last_page, *first_page;
- unsigned int nr_removed;
+ unsigned long nr_removed;
unsigned long head_bit;
int page_entries;
@@ -1640,7 +1641,7 @@ int ring_buffer_resize(struct ring_buffer *buffer, unsigned long size,
int cpu_id)
{
struct ring_buffer_per_cpu *cpu_buffer;
- unsigned nr_pages;
+ unsigned long nr_pages;
int cpu, err = 0;
/*
@@ -1654,14 +1655,13 @@ int ring_buffer_resize(struct ring_buffer *buffer, unsigned long size,
!cpumask_test_cpu(cpu_id, buffer->cpumask))
return size;
- size = DIV_ROUND_UP(size, BUF_PAGE_SIZE);
- size *= BUF_PAGE_SIZE;
+ nr_pages = DIV_ROUND_UP(size, BUF_PAGE_SIZE);
/* we need a minimum of two pages */
- if (size < BUF_PAGE_SIZE * 2)
- size = BUF_PAGE_SIZE * 2;
+ if (nr_pages < 2)
+ nr_pages = 2;
- nr_pages = DIV_ROUND_UP(size, BUF_PAGE_SIZE);
+ size = nr_pages * BUF_PAGE_SIZE;
/*
* Don't succeed if resizing is disabled, as a reader might be
@@ -4602,8 +4602,9 @@ static int rb_cpu_notify(struct notifier_block *self,
struct ring_buffer *buffer =
container_of(self, struct ring_buffer, cpu_notify);
long cpu = (long)hcpu;
- int cpu_i, nr_pages_same;
- unsigned int nr_pages;
+ long nr_pages_same;
+ int cpu_i;
+ unsigned long nr_pages;
switch (action) {
case CPU_UP_PREPARE:
@@ -657,9 +657,9 @@ static struct dma_debug_entry *dma_entry_alloc(void)
spin_lock_irqsave(&free_entries_lock, flags);
if (list_empty(&free_entries)) {
- pr_err("DMA-API: debugging out of memory - disabling\n");
global_disable = true;
spin_unlock_irqrestore(&free_entries_lock, flags);
+ pr_err("DMA-API: debugging out of memory - disabling\n");
return NULL;
}
@@ -908,7 +908,7 @@ static inline void init_reserved_page(unsigned long pfn)
* marks the pages PageReserved. The remaining valid pages are later
* sent to the buddy page allocator.
*/
-void __meminit reserve_bootmem_region(unsigned long start, unsigned long end)
+void __meminit reserve_bootmem_region(phys_addr_t start, phys_addr_t end)
{
unsigned long start_pfn = PFN_DOWN(start);
unsigned long end_pfn = PFN_UP(end);
@@ -585,6 +585,7 @@ static int batadv_route_unicast_packet(struct sk_buff *skb,
struct batadv_unicast_packet *unicast_packet;
struct ethhdr *ethhdr = eth_hdr(skb);
int res, hdr_len, ret = NET_RX_DROP;
+ unsigned int len;
unicast_packet = (struct batadv_unicast_packet *)skb->data;
@@ -625,6 +626,7 @@ static int batadv_route_unicast_packet(struct sk_buff *skb,
if (hdr_len > 0)
batadv_skb_set_priority(skb, hdr_len);
+ len = skb->len;
res = batadv_send_skb_to_orig(skb, orig_node, recv_if);
/* translate transmit result into receive result */
@@ -632,7 +634,7 @@ static int batadv_route_unicast_packet(struct sk_buff *skb,
/* skb was transmitted and consumed */
batadv_inc_counter(bat_priv, BATADV_CNT_FORWARD);
batadv_add_counter(bat_priv, BATADV_CNT_FORWARD_BYTES,
- skb->len + ETH_HLEN);
+ len + ETH_HLEN);
ret = NET_RX_SUCCESS;
} else if (res == NET_XMIT_POLICED) {
@@ -4737,15 +4737,13 @@ static int inet6_set_iftoken(struct inet6_dev *idev, struct in6_addr *token)
{
struct inet6_ifaddr *ifp;
struct net_device *dev = idev->dev;
- bool update_rs = false;
+ bool clear_token, update_rs = false;
struct in6_addr ll_addr;
ASSERT_RTNL();
if (!token)
return -EINVAL;
- if (ipv6_addr_any(token))
- return -EINVAL;
if (dev->flags & (IFF_LOOPBACK | IFF_NOARP))
return -EINVAL;
if (!ipv6_accept_ra(idev))
@@ -4760,10 +4758,13 @@ static int inet6_set_iftoken(struct inet6_dev *idev, struct in6_addr *token)
write_unlock_bh(&idev->lock);
+ clear_token = ipv6_addr_any(token);
+ if (clear_token)
+ goto update_lft;
+
if (!idev->dead && (idev->if_flags & IF_READY) &&
!ipv6_get_lladdr(dev, &ll_addr, IFA_F_TENTATIVE |
IFA_F_OPTIMISTIC)) {
-
/* If we're not ready, then normal ifup will take care
* of this. Otherwise, we need to request our rs here.
*/
@@ -4771,6 +4772,7 @@ static int inet6_set_iftoken(struct inet6_dev *idev, struct in6_addr *token)
update_rs = true;
}
+update_lft:
write_lock_bh(&idev->lock);
if (update_rs) {
@@ -2755,6 +2755,7 @@ static int netlink_dump(struct sock *sk)
struct netlink_callback *cb;
struct sk_buff *skb = NULL;
struct nlmsghdr *nlh;
+ struct module *module;
int len, err = -ENOBUFS;
int alloc_min_size;
int alloc_size;
@@ -2835,9 +2836,11 @@ static int netlink_dump(struct sock *sk)
cb->done(cb);
nlk->cb_running = false;
+ module = cb->module;
+ skb = cb->skb;
mutex_unlock(nlk->cb_mutex);
- module_put(cb->module);
- consume_skb(cb->skb);
+ module_put(module);
+ consume_skb(skb);
return 0;
errout_skb:
@@ -857,8 +857,8 @@ unwrap_integ_data(struct svc_rqst *rqstp, struct xdr_buf *buf, u32 seq, struct g
goto out;
if (svc_getnl(&buf->head[0]) != seq)
goto out;
- /* trim off the mic at the end before returning */
- xdr_buf_trim(buf, mic.len + 4);
+ /* trim off the mic and padding at the end before returning */
+ xdr_buf_trim(buf, round_up_to_quad(mic.len) + 4);
stat = 0;
out:
kfree(mic.data);
@@ -802,7 +802,7 @@ static int tipc_nl_compat_name_table_dump(struct tipc_nl_compat_msg *msg,
goto out;
tipc_tlv_sprintf(msg->rep, "%-10u %s",
- nla_get_u32(publ[TIPC_NLA_PUBL_REF]),
+ nla_get_u32(publ[TIPC_NLA_PUBL_KEY]),
scope_str[nla_get_u32(publ[TIPC_NLA_PUBL_SCOPE])]);
out:
tipc_tlv_sprintf(msg->rep, "\n");
@@ -24,6 +24,7 @@ warning-1 += $(call cc-option, -Wmissing-prototypes)
warning-1 += -Wold-style-definition
warning-1 += $(call cc-option, -Wmissing-include-dirs)
warning-1 += $(call cc-option, -Wunused-but-set-variable)
+warning-1 += $(call cc-option, -Wunused-const-variable)
warning-1 += $(call cc-disable-warning, missing-field-initializers)
warning-1 += $(call cc-disable-warning, sign-compare)
@@ -1843,7 +1843,6 @@ struct security_hook_heads security_hook_heads = {
.tun_dev_attach =
LIST_HEAD_INIT(security_hook_heads.tun_dev_attach),
.tun_dev_open = LIST_HEAD_INIT(security_hook_heads.tun_dev_open),
- .skb_owned_by = LIST_HEAD_INIT(security_hook_heads.skb_owned_by),
#endif /* CONFIG_SECURITY_NETWORK */
#ifdef CONFIG_SECURITY_NETWORK_XFRM
.xfrm_policy_alloc_security =
@@ -5408,8 +5408,9 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
SND_PCI_QUIRK(0x1028, 0x06de, "Dell", ALC293_FIXUP_DISABLE_AAMIX_MULTIJACK),
SND_PCI_QUIRK(0x1028, 0x06df, "Dell", ALC293_FIXUP_DISABLE_AAMIX_MULTIJACK),
SND_PCI_QUIRK(0x1028, 0x06e0, "Dell", ALC293_FIXUP_DISABLE_AAMIX_MULTIJACK),
- SND_PCI_QUIRK(0x1028, 0x0704, "Dell XPS 13", ALC256_FIXUP_DELL_XPS_13_HEADPHONE_NOISE),
+ SND_PCI_QUIRK(0x1028, 0x0704, "Dell XPS 13 9350", ALC256_FIXUP_DELL_XPS_13_HEADPHONE_NOISE),
SND_PCI_QUIRK(0x1028, 0x0725, "Dell Inspiron 3162", ALC255_FIXUP_DELL_SPK_NOISE),
+ SND_PCI_QUIRK(0x1028, 0x075b, "Dell XPS 13 9360", ALC256_FIXUP_DELL_XPS_13_HEADPHONE_NOISE),
SND_PCI_QUIRK(0x1028, 0x164a, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x164b, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x103c, 0x1586, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC2),
@@ -538,6 +538,7 @@ static const struct regmap_config ak4642_regmap = {
.max_register = ARRAY_SIZE(ak4642_reg) + 1,
.reg_defaults = ak4642_reg,
.num_reg_defaults = ARRAY_SIZE(ak4642_reg),
+ .cache_type = REGCACHE_RBTREE,
};
static const struct regmap_config ak4648_regmap = {
@@ -546,6 +547,7 @@ static const struct regmap_config ak4648_regmap = {
.max_register = ARRAY_SIZE(ak4648_reg) + 1,
.reg_defaults = ak4648_reg,
.num_reg_defaults = ARRAY_SIZE(ak4648_reg),
+ .cache_type = REGCACHE_RBTREE,
};
static const struct ak4642_drvdata ak4642_drvdata = {
@@ -54,8 +54,14 @@ int test__vmlinux_matches_kallsyms(void)
* Step 3:
*
* Load and split /proc/kallsyms into multiple maps, one per module.
+ * Do not use kcore, as this test was designed before kcore support
+ * and has parts that only make sense if using the non-kcore code.
+ * XXX: extend it to stress the kcorre code as well, hint: the list
+ * of modules extracted from /proc/kcore, in its current form, can't
+ * be compacted against the list of modules found in the "vmlinux"
+ * code and with the one got from /proc/modules from the "kallsyms" code.
*/
- if (machine__load_kallsyms(&kallsyms, "/proc/kallsyms", type, NULL) <= 0) {
+ if (__machine__load_kallsyms(&kallsyms, "/proc/kallsyms", type, true, NULL) <= 0) {
pr_debug("dso__load_kallsyms ");
goto out;
}
@@ -7,18 +7,18 @@ int perf_reg_value(u64 *valp, struct regs_dump *regs, int id)
int i, idx = 0;
u64 mask = regs->mask;
- if (regs->cache_mask & (1 << id))
+ if (regs->cache_mask & (1ULL << id))
goto out;
- if (!(mask & (1 << id)))
+ if (!(mask & (1ULL << id)))
return -EINVAL;
for (i = 0; i < id; i++) {
- if (mask & (1 << i))
+ if (mask & (1ULL << i))
idx++;
}
- regs->cache_mask |= (1 << id);
+ regs->cache_mask |= (1ULL << id);
regs->cache_regs[id] = regs->regs[idx];
out: