@@ -29,6 +29,7 @@
#include <linux/spinlock.h>
#include <linux/mutex.h>
#include <linux/serial.h>
+#include <linux/swab.h>
#include <linux/kfifo.h>
#include <linux/ioctl.h>
#include <linux/firmware.h>
@@ -284,7 +285,7 @@ static int read_download_mem(struct usb_device *dev, int start_address,
{
int status = 0;
__u8 read_length;
- __be16 be_start_address;
+ u16 be_start_address;
dev_dbg(&dev->dev, "%s - @ %x for %d\n", __func__, start_address, length);
@@ -300,10 +301,14 @@ static int read_download_mem(struct usb_device *dev, int start_address,
if (read_length > 1) {
dev_dbg(&dev->dev, "%s - @ %x for %d\n", __func__, start_address, read_length);
}
- be_start_address = cpu_to_be16(start_address);
+ /*
+ * NOTE: Must use swab as wIndex is sent in little-endian
+ * byte order regardless of host byte order.
+ */
+ be_start_address = swab16((u16)start_address);
status = ti_vread_sync(dev, UMPC_MEMORY_READ,
(__u16)address_type,
- (__force __u16)be_start_address,
+ be_start_address,
buffer, read_length);
if (status) {
@@ -400,7 +405,7 @@ static int write_i2c_mem(struct edgeport_serial *serial,
struct device *dev = &serial->serial->dev->dev;
int status = 0;
int write_length;
- __be16 be_start_address;
+ u16 be_start_address;
/* We can only send a maximum of 1 aligned byte page at a time */
@@ -415,11 +420,16 @@ static int write_i2c_mem(struct edgeport_serial *serial,
__func__, start_address, write_length);
usb_serial_debug_data(dev, __func__, write_length, buffer);
- /* Write first page */
- be_start_address = cpu_to_be16(start_address);
+ /*
+ * Write first page.
+ *
+ * NOTE: Must use swab as wIndex is sent in little-endian byte order
+ * regardless of host byte order.
+ */
+ be_start_address = swab16((u16)start_address);
status = ti_vsend_sync(serial->serial->dev,
UMPC_MEMORY_WRITE, (__u16)address_type,
- (__force __u16)be_start_address,
+ be_start_address,
buffer, write_length);
if (status) {
dev_dbg(dev, "%s - ERROR %d\n", __func__, status);
@@ -442,11 +452,16 @@ static int write_i2c_mem(struct edgeport_serial *serial,
__func__, start_address, write_length);
usb_serial_debug_data(dev, __func__, write_length, buffer);
- /* Write next page */
- be_start_address = cpu_to_be16(start_address);
+ /*
+ * Write next page.
+ *
+ * NOTE: Must use swab as wIndex is sent in little-endian byte
+ * order regardless of host byte order.
+ */
+ be_start_address = swab16((u16)start_address);
status = ti_vsend_sync(serial->serial->dev, UMPC_MEMORY_WRITE,
(__u16)address_type,
- (__force __u16)be_start_address,
+ be_start_address,
buffer, write_length);
if (status) {
dev_err(dev, "%s - ERROR %d\n", __func__, status);
@@ -652,8 +667,8 @@ static int get_descriptor_addr(struct edgeport_serial *serial,
if (rom_desc->Type == desc_type)
return start_address;
- start_address = start_address + sizeof(struct ti_i2c_desc)
- + rom_desc->Size;
+ start_address = start_address + sizeof(struct ti_i2c_desc) +
+ le16_to_cpu(rom_desc->Size);
} while ((start_address < TI_MAX_I2C_SIZE) && rom_desc->Type);
@@ -666,7 +681,7 @@ static int valid_csum(struct ti_i2c_desc *rom_desc, __u8 *buffer)
__u16 i;
__u8 cs = 0;
- for (i = 0; i < rom_desc->Size; i++)
+ for (i = 0; i < le16_to_cpu(rom_desc->Size); i++)
cs = (__u8)(cs + buffer[i]);
if (cs != rom_desc->CheckSum) {
@@ -720,7 +735,7 @@ static int check_i2c_image(struct edgeport_serial *serial)
break;
if ((start_address + sizeof(struct ti_i2c_desc) +
- rom_desc->Size) > TI_MAX_I2C_SIZE) {
+ le16_to_cpu(rom_desc->Size)) > TI_MAX_I2C_SIZE) {
status = -ENODEV;
dev_dbg(dev, "%s - structure too big, erroring out.\n", __func__);
break;
@@ -735,7 +750,8 @@ static int check_i2c_image(struct edgeport_serial *serial)
/* Read the descriptor data */
status = read_rom(serial, start_address +
sizeof(struct ti_i2c_desc),
- rom_desc->Size, buffer);
+ le16_to_cpu(rom_desc->Size),
+ buffer);
if (status)
break;
@@ -744,7 +760,7 @@ static int check_i2c_image(struct edgeport_serial *serial)
break;
}
start_address = start_address + sizeof(struct ti_i2c_desc) +
- rom_desc->Size;
+ le16_to_cpu(rom_desc->Size);
} while ((rom_desc->Type != I2C_DESC_TYPE_ION) &&
(start_address < TI_MAX_I2C_SIZE));
@@ -783,7 +799,7 @@ static int get_manuf_info(struct edgeport_serial *serial, __u8 *buffer)
/* Read the descriptor data */
status = read_rom(serial, start_address+sizeof(struct ti_i2c_desc),
- rom_desc->Size, buffer);
+ le16_to_cpu(rom_desc->Size), buffer);
if (status)
goto exit;
This is a note to let you know that I have just added a patch titled USB: io_ti: fix firmware download on big-endian machines to the linux-3.8.y-queue branch of the 3.8.y.z extended stable tree which can be found at: http://kernel.ubuntu.com/git?p=ubuntu/linux.git;a=shortlog;h=refs/heads/linux-3.8.y-queue This patch is scheduled to be released in version 3.8.13.24. If you, or anyone else, feels it should not be added to this tree, please reply to this email. For more information about the 3.8.y.z tree, see https://wiki.ubuntu.com/Kernel/Dev/ExtendedStable Thanks. -Kamal ------ From c6ef59165337fa3e2951c0b81cfb77e5475ea305 Mon Sep 17 00:00:00 2001 From: Johan Hovold <jhovold@gmail.com> Date: Fri, 25 Apr 2014 15:23:03 +0200 Subject: USB: io_ti: fix firmware download on big-endian machines commit 5509076d1b4485ce9fb07705fcbcd2695907ab5b upstream. During firmware download the device expects memory addresses in big-endian byte order. As the wIndex parameter which hold the address is sent in little-endian byte order regardless of host byte order, we need to use swab16 rather than cpu_to_be16. Also make sure to handle the struct ti_i2c_desc size parameter which is returned in little-endian byte order. Reported-by: Ludovic Drolez <ldrolez@debian.org> Tested-by: Ludovic Drolez <ldrolez@debian.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> --- drivers/usb/serial/io_ti.c | 50 ++++++++++++++++++++++++++++++---------------- 1 file changed, 33 insertions(+), 17 deletions(-) -- 1.9.1