@@ -27,12 +27,6 @@
/*
* Definitions for ALPS version 3 and 4 command mode protocol
*/
-#define ALPS_V3_X_MAX 2000
-#define ALPS_V3_Y_MAX 1400
-
-#define ALPS_BITMAP_X_BITS 15
-#define ALPS_BITMAP_Y_BITS 11
-
#define ALPS_CMD_NIBBLE_10 0x01f2
static const struct alps_nibble_commands alps_v3_nibble_commands[] = {
@@ -269,7 +263,8 @@ static void alps_process_packet_v1_v2(struct psmouse *psmouse)
* These points are returned in x1, y1, x2, and y2 when the return value
* is greater than 0.
*/
-static int alps_process_bitmap(unsigned int x_map, unsigned int y_map,
+static int alps_process_bitmap(struct alps_data *priv,
+ unsigned int x_map, unsigned int y_map,
int *x1, int *y1, int *x2, int *y2)
{
struct alps_bitmap_point {
@@ -311,7 +306,7 @@ static int alps_process_bitmap(unsigned int x_map, unsigned int y_map,
* y bitmap is reversed for what we need (lower positions are in
* higher bits), so we process from the top end.
*/
- y_map = y_map << (sizeof(y_map) * BITS_PER_BYTE - ALPS_BITMAP_Y_BITS);
+ y_map = y_map << (sizeof(y_map) * BITS_PER_BYTE - priv->y_bits);
prev_bit = 0;
point = &y_low;
for (i = 0; y_map != 0; i++, y_map <<= 1) {
@@ -357,16 +352,18 @@ static int alps_process_bitmap(unsigned int x_map, unsigned int y_map,
}
}
- *x1 = (ALPS_V3_X_MAX * (2 * x_low.start_bit + x_low.num_bits - 1)) /
- (2 * (ALPS_BITMAP_X_BITS - 1));
- *y1 = (ALPS_V3_Y_MAX * (2 * y_low.start_bit + y_low.num_bits - 1)) /
- (2 * (ALPS_BITMAP_Y_BITS - 1));
+ *x1 = (priv->x_max * (2 * x_low.start_bit + x_low.num_bits - 1)) /
+ (2 * (priv->x_bits - 1));
+ *y1 = (priv->y_max * (2 * y_low.start_bit + y_low.num_bits - 1)) /
+ (2 * (priv->y_bits - 1));
if (fingers > 1) {
- *x2 = (ALPS_V3_X_MAX * (2 * x_high.start_bit + x_high.num_bits - 1)) /
- (2 * (ALPS_BITMAP_X_BITS - 1));
- *y2 = (ALPS_V3_Y_MAX * (2 * y_high.start_bit + y_high.num_bits - 1)) /
- (2 * (ALPS_BITMAP_Y_BITS - 1));
+ *x2 = (priv->x_max *
+ (2 * x_high.start_bit + x_high.num_bits - 1)) /
+ (2 * (priv->x_bits - 1));
+ *y2 = (priv->y_max *
+ (2 * y_high.start_bit + y_high.num_bits - 1)) /
+ (2 * (priv->y_bits - 1));
}
return fingers;
@@ -484,7 +481,8 @@ static void alps_process_touchpad_packet_v3(struct psmouse *psmouse)
((packet[2] & 0x7f) << 1) |
(packet[4] & 0x01);
- bmap_fingers = alps_process_bitmap(x_bitmap, y_bitmap,
+ bmap_fingers = alps_process_bitmap(priv,
+ x_bitmap, y_bitmap,
&x1, &y1, &x2, &y2);
/*
@@ -641,7 +639,7 @@ static void alps_process_packet_v4(struct psmouse *psmouse)
((priv->multi_data[3] & 0x1f) << 5) |
(priv->multi_data[1] & 0x1f);
- fingers = alps_process_bitmap(x_bitmap, y_bitmap,
+ fingers = alps_process_bitmap(priv, x_bitmap, y_bitmap,
&x1, &y1, &x2, &y2);
/* Store MT data.*/
@@ -1414,6 +1412,11 @@ static void alps_set_defaults(struct alps_data *priv)
priv->mask0 = 0x8f;
priv->flags = ALPS_DUALPOINT;
+ priv->x_max = 2000;
+ priv->y_max = 1400;
+ priv->x_bits = 15;
+ priv->y_bits = 11;
+
switch (priv->proto_version) {
case ALPS_PROTO_V1:
case ALPS_PROTO_V2:
@@ -1544,15 +1547,15 @@ static void alps_set_abs_params_mt(struct alps_data *priv,
{
set_bit(INPUT_PROP_SEMI_MT, dev1->propbit);
input_mt_init_slots(dev1, 2, 0);
- input_set_abs_params(dev1, ABS_MT_POSITION_X, 0, ALPS_V3_X_MAX, 0, 0);
- input_set_abs_params(dev1, ABS_MT_POSITION_Y, 0, ALPS_V3_Y_MAX, 0, 0);
+ input_set_abs_params(dev1, ABS_MT_POSITION_X, 0, priv->x_max, 0, 0);
+ input_set_abs_params(dev1, ABS_MT_POSITION_Y, 0, priv->y_max, 0, 0);
set_bit(BTN_TOOL_DOUBLETAP, dev1->keybit);
set_bit(BTN_TOOL_TRIPLETAP, dev1->keybit);
set_bit(BTN_TOOL_QUADTAP, dev1->keybit);
- input_set_abs_params(dev1, ABS_X, 0, ALPS_V3_X_MAX, 0, 0);
- input_set_abs_params(dev1, ABS_Y, 0, ALPS_V3_Y_MAX, 0, 0);
+ input_set_abs_params(dev1, ABS_X, 0, priv->x_max, 0, 0);
+ input_set_abs_params(dev1, ABS_Y, 0, priv->y_max, 0, 0);
}
int alps_init(struct psmouse *psmouse)
@@ -72,6 +72,10 @@ struct alps_nibble_commands {
* mask0, should match byte0.
* @mask0: The mask used to check the first byte of the report.
* @flags: Additional device capabilities (passthrough port, trackstick, etc.).
+ * @x_max: Largest possible X position value.
+ * @y_max: Largest possible Y position value.
+ * @x_bits: Number of X bits in the MT bitmap.
+ * @y_bits: Number of Y bits in the MT bitmap.
* @hw_init: Protocol-specific hardware init function.
* @process_packet: Protocol-specific function to process a report packet.
* @set_abs_params: Protocol-specific function to configure the input_dev.
@@ -96,6 +100,10 @@ struct alps_data {
unsigned char proto_version;
unsigned char byte0, mask0;
unsigned char flags;
+ int x_max;
+ int y_max;
+ int x_bits;
+ int y_bits;
int (*hw_init)(struct psmouse *psmouse);
void (*process_packet)(struct psmouse *psmouse);