diff mbox

[Maverick,SRU,6/6] UBUNTU - ARM: igepv2: Remove VMMC2 regulator

Message ID 1286815054.3125.37.camel@black
State Accepted
Delegated to: Brad Figg
Headers show

Commit Message

Mathieu Poirier Oct. 11, 2010, 4:37 p.m. UTC
SRU Justification:

Impact: This patch is part of a serie of fix for the IGEPv2 board.  The
VMMC2 regulator is configured but it's not used on the IGEP v2.  Since
the code is contained to the IGEPv2 board file, it will not impact other
boards.

Fix:  The fix consist in remove the declaration and initialization code
for the regulator.

Testcase:  There isn't any noticeable effect associated to this fix.


>From 5d473820768e5a07531fb0ae66496fa7a4671c29 Mon Sep 17 00:00:00 2001
From: Enric Balletbo i Serra <eballetbo@gmail.com>
Date: Mon, 11 Oct 2010 10:15:08 -0600
Subject: [PATCH 6/6] UBUNTU - ARM: igepv2: Remove VMMC2 regulator

VMMC2 regulator is configured but it's not used for the IGEP v2, so
remove this regulator from board.

This work was tested by the community and also been submitted here:
http://marc.info/?l=linux-omap&m=128628965822062&w=2

BugLink: https://bugs.launchpad.net/bugs/654595

Signed-off-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Mathieu J Poirier <mathieu.poirier@canonical.com>
---
 arch/arm/mach-omap2/board-igep0020.c |   26 +++-----------------------
 1 files changed, 3 insertions(+), 23 deletions(-)

Comments

Lee Jones Oct. 12, 2010, 8:20 a.m. UTC | #1
On 11/10/10 17:37, Mathieu Poirier wrote:
> SRU Justification:
> 
> Impact: This patch is part of a serie of fix for the IGEPv2 board.  The
> VMMC2 regulator is configured but it's not used on the IGEP v2.  Since
> the code is contained to the IGEPv2 board file, it will not impact other
> boards.
> 
> Fix:  The fix consist in remove the declaration and initialization code
> for the regulator.
> 
> Testcase:  There isn't any noticeable effect associated to this fix.
> 
> 
>>From 5d473820768e5a07531fb0ae66496fa7a4671c29 Mon Sep 17 00:00:00 2001
> From: Enric Balletbo i Serra <eballetbo@gmail.com>
> Date: Mon, 11 Oct 2010 10:15:08 -0600
> Subject: [PATCH 6/6] UBUNTU - ARM: igepv2: Remove VMMC2 regulator
> 
> VMMC2 regulator is configured but it's not used for the IGEP v2, so
> remove this regulator from board.
> 
> This work was tested by the community and also been submitted here:
> http://marc.info/?l=linux-omap&m=128628965822062&w=2
> 
> BugLink: https://bugs.launchpad.net/bugs/654595
> 
> Signed-off-by: Enric Balletbo i Serra <eballetbo@gmail.com>
> Signed-off-by: Mathieu J Poirier <mathieu.poirier@canonical.com>
> ---
>  arch/arm/mach-omap2/board-igep0020.c |   26 +++-----------------------
>  1 files changed, 3 insertions(+), 23 deletions(-)
> 
> diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
> index 600a40a..fec7387 100644
> --- a/arch/arm/mach-omap2/board-igep0020.c
> +++ b/arch/arm/mach-omap2/board-igep0020.c
> @@ -260,10 +260,6 @@ static struct regulator_consumer_supply igep2_vmmc1_supply = {
>  	.supply		= "vmmc",
>  };
>  
> -static struct regulator_consumer_supply igep2_vmmc2_supply = {
> -	.supply		= "vmmc",
> -};
> -
>  /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
>  static struct regulator_init_data igep2_vmmc1 = {
>  	.constraints = {
> @@ -279,21 +275,6 @@ static struct regulator_init_data igep2_vmmc1 = {
>  	.consumer_supplies      = &igep2_vmmc1_supply,
>  };
>  
> -/* VMMC2 for OMAP VDD_MMC2 (i/o) and MMC2 WIFI */
> -static struct regulator_init_data igep2_vmmc2 = {
> -	.constraints = {
> -		.min_uV			= 1850000,
> -		.max_uV			= 3150000,
> -		.valid_modes_mask	= REGULATOR_MODE_NORMAL
> -					| REGULATOR_MODE_STANDBY,
> -		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
> -					| REGULATOR_CHANGE_MODE
> -					| REGULATOR_CHANGE_STATUS,
> -	},
> -	.num_consumer_supplies  = 1,
> -	.consumer_supplies      = &igep2_vmmc2_supply,
> -};
> -
>  static struct omap2_hsmmc_info mmc[] = {
>  	{
>  		.mmc		= 1,
> @@ -390,11 +371,11 @@ static int igep2_twl_gpio_setup(struct device *dev,
>  	mmc[0].gpio_cd = gpio + 0;
>  	omap2_hsmmc_init(mmc);
>  
> -	/* link regulators to MMC adapters ... we "know" the
> +	/*
> +	 * link regulators to MMC adapters ... we "know" the
>  	 * regulators will be set up only *after* we return.
> -	*/
> +	 */
>  	igep2_vmmc1_supply.dev = mmc[0].dev;
> -	igep2_vmmc2_supply.dev = mmc[1].dev;
>  
>  	/*
>  	 * REVISIT: need ehci-omap hooks for external VBUS
> @@ -536,7 +517,6 @@ static struct twl4030_platform_data igep2_twldata = {
>  	.codec		= &igep2_codec_data,
>  	.gpio		= &igep2_twl4030_gpio_pdata,
>  	.vmmc1          = &igep2_vmmc1,
> -	.vmmc2		= &igep2_vmmc2,
>  	.vpll2		= &igep2_vpll2,
>  
>  };

Signed-off-by: Lee Jones <lee.jones@canonical.com>
diff mbox

Patch

diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 600a40a..fec7387 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -260,10 +260,6 @@  static struct regulator_consumer_supply igep2_vmmc1_supply = {
 	.supply		= "vmmc",
 };
 
-static struct regulator_consumer_supply igep2_vmmc2_supply = {
-	.supply		= "vmmc",
-};
-
 /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
 static struct regulator_init_data igep2_vmmc1 = {
 	.constraints = {
@@ -279,21 +275,6 @@  static struct regulator_init_data igep2_vmmc1 = {
 	.consumer_supplies      = &igep2_vmmc1_supply,
 };
 
-/* VMMC2 for OMAP VDD_MMC2 (i/o) and MMC2 WIFI */
-static struct regulator_init_data igep2_vmmc2 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = 1,
-	.consumer_supplies      = &igep2_vmmc2_supply,
-};
-
 static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
@@ -390,11 +371,11 @@  static int igep2_twl_gpio_setup(struct device *dev,
 	mmc[0].gpio_cd = gpio + 0;
 	omap2_hsmmc_init(mmc);
 
-	/* link regulators to MMC adapters ... we "know" the
+	/*
+	 * link regulators to MMC adapters ... we "know" the
 	 * regulators will be set up only *after* we return.
-	*/
+	 */
 	igep2_vmmc1_supply.dev = mmc[0].dev;
-	igep2_vmmc2_supply.dev = mmc[1].dev;
 
 	/*
 	 * REVISIT: need ehci-omap hooks for external VBUS
@@ -536,7 +517,6 @@  static struct twl4030_platform_data igep2_twldata = {
 	.codec		= &igep2_codec_data,
 	.gpio		= &igep2_twl4030_gpio_pdata,
 	.vmmc1          = &igep2_vmmc1,
-	.vmmc2		= &igep2_vmmc2,
 	.vpll2		= &igep2_vpll2,
 
 };