Message ID | BLU436-SMTP224AA89E76BAF19966ADFDFF4D0@phx.gbl |
---|---|
State | Superseded |
Delegated to: | Daniel Schwierzeck |
Headers | show |
On 05/22/2016 05:59 AM, Wills Wang wrote: > This patch enable network function for ap121 board, it's based on > the coming ethernet driver ag7xxx. > > Signed-off-by: Wills Wang <wills.wang@live.com> > --- Acked-by: Marek Vasut <marex@denx.de> > arch/mips/dts/ap121.dts | 5 +++++ > arch/mips/dts/ar933x.dtsi | 4 ++-- > board/qca/ap121/ap121.c | 2 ++ > configs/ap121_defconfig | 9 +++++++-- > 4 files changed, 16 insertions(+), 4 deletions(-) > > diff --git a/arch/mips/dts/ap121.dts b/arch/mips/dts/ap121.dts > index e31f601..a934a58 100644 > --- a/arch/mips/dts/ap121.dts > +++ b/arch/mips/dts/ap121.dts > @@ -41,3 +41,8 @@ > reg = <0>; > }; > }; > + > +&gmac0 { > + phy-mode = "rmii"; > + status = "okay"; > +}; > diff --git a/arch/mips/dts/ar933x.dtsi b/arch/mips/dts/ar933x.dtsi > index 00896b2..971f13e 100644 > --- a/arch/mips/dts/ar933x.dtsi > +++ b/arch/mips/dts/ar933x.dtsi > @@ -75,7 +75,7 @@ > }; > > gmac0: eth@0x19000000 { > - compatible = "qca,ag7240-mac"; > + compatible = "qca,ag933x-mac"; > reg = <0x19000000 0x200>; > phy = <&phy0>; > phy-mode = "rmii"; > @@ -92,7 +92,7 @@ > }; > > gmac1: eth@0x1a000000 { > - compatible = "qca,ag7240-mac"; > + compatible = "qca,ag933x-mac"; > reg = <0x1a000000 0x200>; > phy = <&phy0>; > phy-mode = "rgmii"; > diff --git a/board/qca/ap121/ap121.c b/board/qca/ap121/ap121.c > index b0e1993..7b5a4ac 100644 > --- a/board/qca/ap121/ap121.c > +++ b/board/qca/ap121/ap121.c > @@ -45,6 +45,8 @@ int board_early_init_f(void) > #ifdef CONFIG_DEBUG_UART > debug_uart_init(); > #endif > + > ddr_init(400, 400, 200); > + ath79_eth_reset(); > return 0; > } > diff --git a/configs/ap121_defconfig b/configs/ap121_defconfig > index 7604e2e..91fa734 100644 > --- a/configs/ap121_defconfig > +++ b/configs/ap121_defconfig > @@ -19,8 +19,13 @@ CONFIG_SYS_PROMPT="ap121 # " > CONFIG_CMD_SF=y > CONFIG_CMD_SPI=y > # CONFIG_CMD_FPGA is not set > -# CONFIG_CMD_NET is not set > -# CONFIG_CMD_NFS is not set > +CONFIG_CMD_NET=y > +CONFIG_CMD_NFS=y > +CONFIG_CMD_DHCP=y > +CONFIG_CMD_PING=y > +CONFIG_NET_RANDOM_ETHADDR=y > +CONFIG_DM_ETH=y > +CONFIG_AG7XXX=y > CONFIG_SPI_FLASH=y > CONFIG_SPI_FLASH_BAR=y > CONFIG_SPI_FLASH_ATMEL=y >
diff --git a/arch/mips/dts/ap121.dts b/arch/mips/dts/ap121.dts index e31f601..a934a58 100644 --- a/arch/mips/dts/ap121.dts +++ b/arch/mips/dts/ap121.dts @@ -41,3 +41,8 @@ reg = <0>; }; }; + +&gmac0 { + phy-mode = "rmii"; + status = "okay"; +}; diff --git a/arch/mips/dts/ar933x.dtsi b/arch/mips/dts/ar933x.dtsi index 00896b2..971f13e 100644 --- a/arch/mips/dts/ar933x.dtsi +++ b/arch/mips/dts/ar933x.dtsi @@ -75,7 +75,7 @@ }; gmac0: eth@0x19000000 { - compatible = "qca,ag7240-mac"; + compatible = "qca,ag933x-mac"; reg = <0x19000000 0x200>; phy = <&phy0>; phy-mode = "rmii"; @@ -92,7 +92,7 @@ }; gmac1: eth@0x1a000000 { - compatible = "qca,ag7240-mac"; + compatible = "qca,ag933x-mac"; reg = <0x1a000000 0x200>; phy = <&phy0>; phy-mode = "rgmii"; diff --git a/board/qca/ap121/ap121.c b/board/qca/ap121/ap121.c index b0e1993..7b5a4ac 100644 --- a/board/qca/ap121/ap121.c +++ b/board/qca/ap121/ap121.c @@ -45,6 +45,8 @@ int board_early_init_f(void) #ifdef CONFIG_DEBUG_UART debug_uart_init(); #endif + ddr_init(400, 400, 200); + ath79_eth_reset(); return 0; } diff --git a/configs/ap121_defconfig b/configs/ap121_defconfig index 7604e2e..91fa734 100644 --- a/configs/ap121_defconfig +++ b/configs/ap121_defconfig @@ -19,8 +19,13 @@ CONFIG_SYS_PROMPT="ap121 # " CONFIG_CMD_SF=y CONFIG_CMD_SPI=y # CONFIG_CMD_FPGA is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set +CONFIG_CMD_NET=y +CONFIG_CMD_NFS=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_PING=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_DM_ETH=y +CONFIG_AG7XXX=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_ATMEL=y
This patch enable network function for ap121 board, it's based on the coming ethernet driver ag7xxx. Signed-off-by: Wills Wang <wills.wang@live.com> --- arch/mips/dts/ap121.dts | 5 +++++ arch/mips/dts/ar933x.dtsi | 4 ++-- board/qca/ap121/ap121.c | 2 ++ configs/ap121_defconfig | 9 +++++++-- 4 files changed, 16 insertions(+), 4 deletions(-)