diff mbox

[U-Boot] eb_cpux9k2: add USB host support to board

Message ID 4DB181A6.1030108@scharsoft.de
State Superseded
Headers show

Commit Message

Jens Scharsig April 22, 2011, 1:24 p.m. UTC 
* add USB host support to eb_cpux9k2 board


Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de>
---
  include/configs/eb_cpux9k2.h |   16 +++++++++++++++-
  1 files changed, 15 insertions(+), 1 deletions(-)

Comments

Albert ARIBAUD July 9, 2011, 7:37 a.m. UTC | #1 
Hi Jens,

Le 22/04/2011 15:24, Jens Scharsig a écrit :
> * add USB host support to eb_cpux9k2 board
>
>
> Signed-off-by: Jens Scharsig<js_at_ng@scharsoft.de>
> ---
>    include/configs/eb_cpux9k2.h |   16 +++++++++++++++-
>    1 files changed, 15 insertions(+), 1 deletions(-)

This patch was left unanswered, and does not apply properly any more. At 
your convenience, please either drop it or post a rebased V2.

Amicalement,
diff mbox

Patch

diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h
index 754fc8b..9d99f65 100644
--- a/include/configs/eb_cpux9k2.h
+++ b/include/configs/eb_cpux9k2.h
@@ -49,7 +49,6 @@ 
  #define CONFIG_SYS_U_BOOT_BASE		PHYS_FLASH_1
  #define CONFIG_SYS_U_BOOT_SIZE		0x60000 /* 384 KBytes */
  
-
  #define CONFIG_BOOT_RETRY_TIME		30
  #define CONFIG_CMDLINE_EDITING
  
@@ -137,6 +136,8 @@ 
  #define CONFIG_CMD_PING
  #define CONFIG_I2C_CMD_NO_FLAT
  #define CONFIG_I2C_CMD_TREE
+#define CONFIG_CMD_USB
+#define CONFIG_CMD_FAT
  
  #define CONFIG_SYS_LONGHELP
  
@@ -168,6 +169,19 @@ 
   * Hardware drivers
   */
  
+#define CONFIG_USB_ATMEL
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_USB_STORAGE
+#define CONFIG_DOS_PARTITION
+#define CONFIG_ISO_PARTITION
+#define CONFIG_EFI_PARTITION
+
+#define CONFIG_AT91C_PQFP_UHPBUG
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	1
+#define CONFIG_SYS_USB_OHCI_CPU_INIT
+#define CONFIG_SYS_USB_OHCI_REGS_BASE		0x00300000
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91rm9200"
+
  /*
   * UART/CONSOLE
   */