| Message ID | 3376a0eb-57f4-416a-b4b8-86cee769d6eb@siemens.com |
|---|---|
| State | Accepted |
| Commit | 53a1eb994aeaa8d17643aff573086666ef0cc541 |
| Delegated to: | Tom Rini |
| Headers | show |
| Series | arm: dts: k3-am65-iot2050: Fix boot | expand |
On 05/10/2023 07:37, Jan Kiszka wrote: > From: Jan Kiszka <jan.kiszka@siemens.com> > > Since commit [1] A53 u-boot proper is broken. This is because nodes > marked as 'bootph-pre-ram' are not available at u-boot proper before > relocation. > > To fix this we mark all nodes in u-boot.dtsi as 'bootph-all'. > > [1] 9e644284ab812 ("dm: core: Report bootph-pre-ram/sram node as pre-reloc after relocation") > > Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Roger Quadros <rogerq@kernel.org>
On 06:37-20231005, Jan Kiszka wrote: > From: Jan Kiszka <jan.kiszka@siemens.com> > > Since commit [1] A53 u-boot proper is broken. This is because nodes > marked as 'bootph-pre-ram' are not available at u-boot proper before > relocation. > > To fix this we mark all nodes in u-boot.dtsi as 'bootph-all'. > > [1] 9e644284ab812 ("dm: core: Report bootph-pre-ram/sram node as pre-reloc after relocation") > > Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Nishanth Menon <nm@ti.com> > --- > .../dts/k3-am65-iot2050-common-u-boot.dtsi | 44 +++++++++---------- > 1 file changed, 22 insertions(+), 22 deletions(-) > > diff --git a/arch/arm/dts/k3-am65-iot2050-common-u-boot.dtsi b/arch/arm/dts/k3-am65-iot2050-common-u-boot.dtsi > index 9fd64809a63..30fc7a78d89 100644 > --- a/arch/arm/dts/k3-am65-iot2050-common-u-boot.dtsi > +++ b/arch/arm/dts/k3-am65-iot2050-common-u-boot.dtsi > @@ -37,18 +37,18 @@ > }; > > leds { > - bootph-pre-ram; > + bootph-all; > status-led-red { > - bootph-pre-ram; > + bootph-all; > }; > status-led-green { > - bootph-pre-ram; > + bootph-all; > }; > }; > }; > > &cbass_mcu { > - bootph-pre-ram; > + bootph-all; > > mcu_navss: bus@28380000 { > ringacc@2b800000 { > @@ -75,70 +75,70 @@ > }; > > &cbass_wakeup { > - bootph-pre-ram; > + bootph-all; > }; > > &cbass_main { > - bootph-pre-ram; > + bootph-all; > main_navss: bus@30800000 { > - bootph-pre-ram; > + bootph-all; > }; > }; > > &wkup_pmx0 { > - bootph-pre-ram; > + bootph-all; > mcu-fss0-ospi0-pins-default { > - bootph-pre-ram; > + bootph-all; > }; > }; > > &main_pmx0 { > - bootph-pre-ram; > + bootph-all; > main-uart1-pins-default { > - bootph-pre-ram; > + bootph-all; > }; > }; > > &main_uart1 { > - bootph-pre-ram; > + bootph-all; > current-speed = <115200>; > }; > > &wkup_gpio0 { > - bootph-pre-ram; > + bootph-all; > }; > > &ospi0 { > - bootph-pre-ram; > + bootph-all; > flash@0 { > - bootph-pre-ram; > + bootph-all; > }; > }; > > &secure_proxy_main { > - bootph-pre-ram; > + bootph-all; > }; > > &dmsc { > - bootph-pre-ram; > + bootph-all; > k3_sysreset: sysreset-controller { > compatible = "ti,sci-sysreset"; > - bootph-pre-ram; > + bootph-all; > }; > }; > > &k3_pds { > - bootph-pre-ram; > + bootph-all; > }; > > &k3_clks { > - bootph-pre-ram; > + bootph-all; > }; > > &k3_reset { > - bootph-pre-ram; > + bootph-all; > }; > > &fss { > - bootph-pre-ram; > + bootph-all; > }; > -- > 2.35.3
On Thu, Oct 05, 2023 at 06:37:17AM +0200, Jan Kiszka wrote: > From: Jan Kiszka <jan.kiszka@siemens.com> > > Since commit [1] A53 u-boot proper is broken. This is because nodes > marked as 'bootph-pre-ram' are not available at u-boot proper before > relocation. > > To fix this we mark all nodes in u-boot.dtsi as 'bootph-all'. > > [1] 9e644284ab812 ("dm: core: Report bootph-pre-ram/sram node as pre-reloc after relocation") > > Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> > Reviewed-by: Roger Quadros <rogerq@kernel.org> > Reviewed-by: Nishanth Menon <nm@ti.com> Applied to u-boot/master, thanks!
diff --git a/arch/arm/dts/k3-am65-iot2050-common-u-boot.dtsi b/arch/arm/dts/k3-am65-iot2050-common-u-boot.dtsi index 9fd64809a63..30fc7a78d89 100644 --- a/arch/arm/dts/k3-am65-iot2050-common-u-boot.dtsi +++ b/arch/arm/dts/k3-am65-iot2050-common-u-boot.dtsi @@ -37,18 +37,18 @@ }; leds { - bootph-pre-ram; + bootph-all; status-led-red { - bootph-pre-ram; + bootph-all; }; status-led-green { - bootph-pre-ram; + bootph-all; }; }; }; &cbass_mcu { - bootph-pre-ram; + bootph-all; mcu_navss: bus@28380000 { ringacc@2b800000 { @@ -75,70 +75,70 @@ }; &cbass_wakeup { - bootph-pre-ram; + bootph-all; }; &cbass_main { - bootph-pre-ram; + bootph-all; main_navss: bus@30800000 { - bootph-pre-ram; + bootph-all; }; }; &wkup_pmx0 { - bootph-pre-ram; + bootph-all; mcu-fss0-ospi0-pins-default { - bootph-pre-ram; + bootph-all; }; }; &main_pmx0 { - bootph-pre-ram; + bootph-all; main-uart1-pins-default { - bootph-pre-ram; + bootph-all; }; }; &main_uart1 { - bootph-pre-ram; + bootph-all; current-speed = <115200>; }; &wkup_gpio0 { - bootph-pre-ram; + bootph-all; }; &ospi0 { - bootph-pre-ram; + bootph-all; flash@0 { - bootph-pre-ram; + bootph-all; }; }; &secure_proxy_main { - bootph-pre-ram; + bootph-all; }; &dmsc { - bootph-pre-ram; + bootph-all; k3_sysreset: sysreset-controller { compatible = "ti,sci-sysreset"; - bootph-pre-ram; + bootph-all; }; }; &k3_pds { - bootph-pre-ram; + bootph-all; }; &k3_clks { - bootph-pre-ram; + bootph-all; }; &k3_reset { - bootph-pre-ram; + bootph-all; }; &fss { - bootph-pre-ram; + bootph-all; };